I am building a new system using an Kingston 240GB SSD drive I pulled from my notebook (when I had to upgrade to a 500GB SSD drive). Centos install went fine and ran for a couple days then got errors on the console. Here is an example: [168176.995064] sd 0:0:0:0: [sda] tag#14 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [168177.004050] sd 0:0:0:0: [sda] tag#14 CDB: Read(10) 28 00 01 04 68 b0 00 00 08 00 [168177.011615] blk_update_request: I/O error, dev sda, sector 17066160 [168487.534510] sd 0:0:0:0: [sda] tag#17 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [168487.543576] sd 0:0:0:0: [sda] tag#17 CDB: Read(10) 28 00 01 04 68 b0 00 00 08 00 [168487.551206] blk_update_request: I/O error, dev sda, sector 17066160 [168787.813941] sd 0:0:0:0: [sda] tag#20 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [168787.822951] sd 0:0:0:0: [sda] tag#20 CDB: Read(10) 28 00 01 04 68 b0 00 00 08 00 [168787.830544] blk_update_request: I/O error, dev sda, sector 17066160 Eventually, I could not do anything on the system. Not even a 'reboot'. I had to do a cold power cycle to bring things back. Is there anything to do about this or trash the drive and start anew? Thanks