On 03/02/17 20:24, Cameron Smith wrote: > Active Operations = Background Initialization (0%) > > Once this completes you would be able to run a CC > well, I'm not so sure... $ perccli /c0/v1 show init Controller = 0 Status = Success Description = None VD Operation Status : =================== ----------------------------------------------------------- VD Operation Progress% Status Estimated Time Left ----------------------------------------------------------- 1 INIT - Not in progress - ----------------------------------------------------------- $ perccli /c0/v1 start init force Controller = 0 Status = Failure Description = None Detailed Status : =============== ------------------------------------------------- VD Operation Status ErrCd ErrMsg ------------------------------------------------- 1 INIT Failed 1001 Start FGI not possible ------------------------------------------------- there are two more raid volumes in that chassis under a one H800. The whole lot: DG/VD TYPE State Access Consist Cache Cac sCC Size Name --------------------------------------------------------------- 0/0 Cac0 Optl RW Yes RWTD - OFF 512.0 GB 3/1 RAID10 Optl RW No RWBC R OFF 18.188 TB 1/2 RAID0 Optl RW Yes RWBC R OFF 38.195 TB 2/3 RAID0 Optl RW Yes RWBC R OFF 12.731 TB --------------------------------------------------------------- All these disks currently in raid10, plus one more, were before parts of a raid5 volume and all was a OK. Although inconsistent the volume is in the OS and appears normal. it's quite a puzzle to me. thanks > > Cameron > _______________________________________________ > CentOS mailing list > CentOS at centos.org > https://lists.centos.org/mailman/listinfo/centos