On 06/10/2017 02:54 AM, Fabian Arrotin wrote: > On 09/06/17 21:00, Andrew Holway wrote: >> I am searching for the cheapeat *nix SOC device with ethernet and wifi that >> can run Python 2.7. Ethernet should be 100mbit and hopefully supporting PXE. >> >> OT because im doubting you can squeeze our bloaty friend onto such a >> device.... :) > I would have answered "CentOS 7 on armhfp board" but your last > requirement is the one I'm not sure about : PXE boot > > But it seems possible : > http://linux-sunxi.org/How_to_boot_the_A10_or_A20_over_the_network Is Hans de Goede still over at Redhat? He stepped down from maintaining Sunxi, but did major work on uboot, and this looks like something that he had a hand in. He was the one to set up the Cubieboard uboot to look for other devices if no partitions on the mSD card. > Never tried that, but it seems that you still need to at least have > uboot on a microSD, as embedded firmware on such low cost armhfp boards > have zero features for this > > Now if someone has interest in this , why not test it and report that on > the dedicated "CentOS armhfp" wiki page ? > https://wiki.centos.org/SpecialInterestGroup/AltArch/Arm32 :-) I don't do any network booting. I prefer to have my local sata drive...