[CentOS] Connecting to internet with USB tethered iphone

Larry Martell larry.martell at gmail.com
Fri Sep 22 20:36:06 UTC 2017


On Fri, Sep 22, 2017 at 11:50 AM, Stephen John Smoogen <smooge at gmail.com> wrote:
> On 22 September 2017 at 11:39, Larry Martell <larry.martell at gmail.com> wrote:
>> On Fri, Sep 22, 2017 at 11:30 AM Stephen John Smoogen <smooge at gmail.com>
>> wrote:
>>
>>> On 22 September 2017 at 10:33, Larry Martell <larry.martell at gmail.com>
>>> wrote:
>>> > I am trying to get a centos 6 system on the internet with a tethered
>>> > iPhone. I can see the phone with lsusb as bus 001 device 011. A post on
>>> > stackoverflow said I would need to run "# ip link set usb0 up && dhcpcd
>>> > usb0"
>>> >
>>> > But how do I reference my phone in that command?
>>>
>>> I thought that if the phone is in tethering mode that is all you need
>>> to do. The command is saying setup an 'ethernet' port on the USB and
>>> to ask for a dhcpd command from it. If the phone allows tethering it
>>> will be using its USB as an ethernet connection and will see a dhcpd
>>> connection and will give out an ip address.
>>
>>
>>
>> Seems something else is using usb0 - without the phone connected I see
>> something on usb0 when running ifconfig. I think it's some internal
>> network.  I tried running those commands when the phones be was connected
>> but the system still is not on the internet.
>>
>
> That may be the case with some hardware. A lot of management hardware
> will appear as a USB network address so you can loop back into the
> hardware that way. You could try usb1 for the phone to see if that
> works.

I did try that - I got no such device or something like that.



More information about the CentOS mailing list