On Thu, 23 Aug 2018 at 19:11, TE Dukes <tdukes at palmettoshopper.com> wrote: > > > Whoooosh, senior moment!! > > Here's the link: > https://paste.fedoraproject.org/paste/MMNEJmqIrEzK-A4N3MR0ZA > > I just recently disabled IPV6 due to errors resolving I saw in the logs. > This was AFTER mail quit working the second time. It did not correct the > problem. Both times, this has happened after a kernel upgrade. I have had no > errors this time, except for IPV6 stuff. > I think the error may be here: /etc/hosts: multi on If that is the /etc/hosts file then something is changing it somewhere (and the kernel rpms do not touch this file unless someone wrote over it.) The file should be: 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 The second problem may be in whatever created that ifcfg-eno1 file. I have resorted and cleaned it up so it is easier to look at DEVICE=eno1 NAME=eth0 BOOTPROTO=none BROADCAST=192.168.1.255 DNS1=166.102.165.13 DNS2=207.91.5.20 DNS3=127.0.0.1 GATEWAY=192.168.1.1 IPADDR=192.168.1.110 NETMASK=255.255.255.0 NETWORK=192.168.1.0 DEFROUTE=yes DOMAIN=palmettodomains.com IPV4_FAILURE_FATAL=no IPV6INIT=no ONBOOT=yes TYPE=Ethernet UUID=cfd35a8f-6c40-4a80-bff5-821a91d0775b ZONE=public The third problem is possibly your DNS3 which is pointing to 127.0.0.1 which means you have a local nameserver running on the box. No idea what that is but it is probably something that needs to be reconfigured or turned off. > TIA > > _______________________________________________ > CentOS mailing list > CentOS at centos.org > https://lists.centos.org/mailman/listinfo/centos -- Stephen J Smoogen.