Hello CentOS-Community, I have to maintain a server that should be useable with VNC and some software requires to run VirtualGL. Also a nvidia graphic card is installed. After downloading and installing the nvidia driver from nvidias homepage and modifying the xorg.conf as mentioned on the virtualgL-homepage, I am not able to restart lightdm anymore. Lightdm should be running, otherwise it is not possible to run virtualgl in an appropriate way. I had the same/similar issues on three different servers with three different nvidia graphic cards. Any help is appreciated. Best Regards, Felix Kölzow ###### log files and xorg.conf ####### nvidia-detect leads to: [10de:11fa] NVIDIA Corporation GK106GL [Quadro K4000] This device requires the current 390.59 NVIDIA driver kmod-nvidia My xorg.conf file looks like: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 390.59 (buildmeister at swio-display-x64-rhel04-13) Wed May 9 23:09:38 PDT 2018 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" FontPath "/usr/share/fonts/default/Type1" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BusID "PCI:42:00:0" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection and the lightdm.conf looks like: [root at sv199 X11]# cat /etc/lightdm/lightdm.conf # # General configuration # # start-default-seat = True to always start one seat if none are defined in the configuration # greeter-user = User to run greeter as # minimum-display-number = Minimum display number to use for X servers # minimum-vt = First VT to run displays on # lock-memory = True to prevent memory from being paged to disk # user-authority-in-system-dir = True if session authority should be in the system location # guest-account-script = Script to be run to setup guest account # logind-check-graphical = True to on start seats that are marked as graphical by logind # log-directory = Directory to log information to # run-directory = Directory to put running state in # cache-directory = Directory to cache to # sessions-directory = Directory to find sessions # remote-sessions-directory = Directory to find remote sessions # greeters-directory = Directory to find greeters # backup-logs = True to move add a .old suffix to old log files when opening new ones # dbus-service = True if LightDM provides a D-Bus service to control it # [LightDM] #start-default-seat=true #greeter-user=lightdm #minimum-display-number=0 #minimum-vt=7 #lock-memory=true #user-authority-in-system-dir=false #guest-account-script=guest-account #logind-check-graphical=false #log-directory=/var/log/lightdm #run-directory=/var/run/lightdm #cache-directory=/var/cache/lightdm #sessions-directory=/usr/share/lightdm/sessions:/usr/share/xsessions:/usr/share/wayland-sessions #remote-sessions-directory=/usr/share/lightdm/remote-sessions #greeters-directory=$XDG_DATA_DIRS/lightdm/greeters:$XDG_DATA_DIRS/xgreeters greeters-directory=/usr/share/xgreeters/ #backup-logs=true #dbus-service=true # # Seat configuration # # Seat configuration is matched against the seat name glob in the section, for example: # [Seat:*] matches all seats and is applied first. # [Seat:seat0] matches the seat named "seat0". # [Seat:seat-thin-client*] matches all seats that have names that start with "seat-thin-client". # # type = Seat type (local, xremote, unity) # pam-service = PAM service to use for login # pam-autologin-service = PAM service to use for autologin # pam-greeter-service = PAM service to use for greeters # xserver-backend = X backend to use (mir) # xserver-command = X server command to run (can also contain arguments e.g. X -special-option) # xmir-command = Xmir server command to run (can also contain arguments e.g. Xmir -special-option) # xserver-config = Config file to pass to X server # xserver-layout = Layout to pass to X server # xserver-allow-tcp = True if TCP/IP connections are allowed to this X server # xserver-share = True if the X server is shared for both greeter and session # xserver-hostname = Hostname of X server (only for type=xremote) # xserver-display-number = Display number of X server (only for type=xremote) # xdmcp-manager = XDMCP manager to connect to (implies xserver-allow-tcp=true) # xdmcp-port = XDMCP UDP/IP port to communicate on # xdmcp-key = Authentication key to use for XDM-AUTHENTICATION-1 (stored in keys.conf) # unity-compositor-command = Unity compositor command to run (can also contain arguments e.g. unity-system-compositor -special-option) # unity-compositor-timeout = Number of seconds to wait for compositor to start # greeter-session = Session to load for greeter # greeter-hide-users = True to hide the user list # greeter-allow-guest = True if the greeter should show a guest login option # greeter-show-manual-login = True if the greeter should offer a manual login option # greeter-show-remote-login = True if the greeter should offer a remote login option # user-session = Session to load for users # allow-user-switching = True if allowed to switch users # allow-guest = True if guest login is allowed # guest-session = Session to load for guests (overrides user-session) # session-wrapper = Wrapper script to run session with # greeter-wrapper = Wrapper script to run greeter with # guest-wrapper = Wrapper script to run guest sessions with # display-stopped-script = Script to run after stopping the display server (runs as root) # greeter-setup-script = Script to run when starting a greeter (runs as root) # session-setup-script = Script to run when starting a user session (runs as root) # session-cleanup-script = Script to run when quitting a user session (runs as root) # autologin-guest = True to log in as guest by default # autologin-user = User to log in with by default (overrides autologin-guest) # autologin-user-timeout = Number of seconds to wait before loading default user # autologin-session = Session to load for automatic login (overrides user-session) # autologin-in-background = True if autologin session should not be immediately activated # exit-on-failure = True if the daemon should exit if this seat fails # [Seat:*] #type=local #pam-service=lightdm #pam-autologin-service=lightdm-autologin #pam-greeter-service=lightdm-greeter #xserver-backend= #xserver-command=X #xmir-command=Xmir #xserver-config= #xserver-layout= #xserver-allow-tcp=false #xserver-share=true #xserver-hostname= #xserver-display-number= #xdmcp-manager= #xdmcp-port=177 #xdmcp-key= #unity-compositor-command=unity-system-compositor #unity-compositor-timeout=60 #greeter-session=lightdm-slick-greeter #greeter-hide-users=false #greeter-allow-guest=true #greeter-show-manual-login=false #greeter-show-remote-login=true #user-session=default #allow-user-switching=true #allow-guest=true #guest-session= #session-wrapper=lightdm-session #greeter-wrapper= #guest-wrapper= #display-stopped-script= #greeter-setup-script= #session-setup-script= #session-cleanup-script= #autologin-guest=false #autologin-user= #autologin-user-timeout=0 #autologin-in-background=false #autologin-session= #exit-on-failure=false # # XDMCP Server configuration # # enabled = True if XDMCP connections should be allowed # port = UDP/IP port to listen for connections on # listen-address = Host/address to listen for XDMCP connections (use all addresses if not present) # key = Authentication key to use for XDM-AUTHENTICATION-1 or blank to not use authentication (stored in keys.conf) # hostname = Hostname to report to XDMCP clients (defaults to system hostname if unset) # # The authentication key is a 56 bit DES key specified in hex as 0xnnnnnnnnnnnnnn. Alternatively # it can be a word and the first 7 characters are used as the key. # [XDMCPServer] #enabled=false #port=177 #listen-address= #key= #hostname= # # VNC Server configuration # # enabled = True if VNC connections should be allowed # command = Command to run Xvnc server with # port = TCP/IP port to listen for connections on # listen-address = Host/address to listen for VNC connections (use all addresses if not present) # width = Width of display to use # height = Height of display to use # depth = Color depth of display to use # [VNCServer] #enabled=false #command=Xvnc #port=5900 #listen-address= #width=1024 #height=768 #depth=8 [SeatDefaults] display-setup-script=xhost +LOCAL: This is lightdm.log file looks like: [root at sv199 X11]# cat /var/log/lightdm/lightdm.log [+0.00s] DEBUG: Logging to /var/log/lightdm/lightdm.log [+0.00s] DEBUG: Starting Light Display Manager 1.25.0, UID=0 PID=3411 [+0.00s] DEBUG: Loading configuration dirs from /usr/share/lightdm/lightdm.conf.d [+0.00s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/50-backup-logs.conf [+0.00s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/50-disable-guest.conf [+0.00s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/50-minimum-vt.conf [+0.00s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/50-session-wrapper.conf [+0.00s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/50-user-authority-in-system-dir.conf [+0.00s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/50-xserver-command.conf [+0.00s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/90-slick-greeter.conf [+0.00s] DEBUG: Loading configuration dirs from /usr/local/share/lightdm/lightdm.conf.d [+0.00s] DEBUG: Loading configuration dirs from /etc/xdg/lightdm/lightdm.conf.d [+0.00s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf [+0.00s] DEBUG: [SeatDefaults] is now called [Seat:*], please update this configuration [+0.00s] DEBUG: Registered seat module local [+0.00s] DEBUG: Registered seat module xremote [+0.00s] DEBUG: Registered seat module unity [+0.00s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager [+0.00s] DEBUG: Monitoring logind for seats [+0.00s] DEBUG: New seat added from logind: seat0 [+0.00s] DEBUG: Seat seat0: Loading properties from config section Seat:* [+0.00s] DEBUG: Seat seat0: Starting [+0.00s] DEBUG: Seat seat0: Creating greeter session [+0.00s] DEBUG: Seat seat0: Creating display server of type x [+0.01s] DEBUG: Using VT 1 [+0.01s] DEBUG: Seat seat0: Starting local X display on VT 1 [+0.01s] DEBUG: XServer 0: Logging to /var/log/lightdm/x-0.log [+0.01s] DEBUG: XServer 0: Writing X server authority to /var/run/lightdm/root/:0 [+0.01s] DEBUG: XServer 0: Launching X Server [+0.01s] DEBUG: Launching process 3417: /usr/bin/X -core -noreset :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt1 -novtswitch -background none [+0.01s] DEBUG: XServer 0: Waiting for ready signal from X server :0 [+0.01s] DEBUG: Acquired bus name org.freedesktop.DisplayManager [+0.01s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0 [+0.01s] DEBUG: Loading users from org.freedesktop.Accounts [+0.01s] DEBUG: User /org/freedesktop/Accounts/User1000 added [+0.01s] DEBUG: User /org/freedesktop/Accounts/User1002 added [+0.01s] DEBUG: User /org/freedesktop/Accounts/User1003 added [+0.01s] DEBUG: User /org/freedesktop/Accounts/User1001 added [+0.09s] DEBUG: Process 3417 terminated with signal 6 [+0.09s] DEBUG: XServer 0: X server stopped [+0.09s] DEBUG: Releasing VT 1 [+0.09s] DEBUG: XServer 0: Removing X server authority /var/run/lightdm/root/:0 [+0.09s] DEBUG: Seat seat0: Display server stopped [+0.09s] DEBUG: Seat seat0: Stopping session [+0.09s] DEBUG: Seat seat0: Session stopped [+0.09s] DEBUG: Seat seat0: Stopping display server, no sessions require it [+0.09s] DEBUG: Seat seat0: Stopping; greeter display server failed to start [+0.09s] DEBUG: Seat seat0: Stopping [+0.09s] DEBUG: Seat seat0: Stopped [+0.09s] DEBUG: Required seat has stopped [+0.09s] DEBUG: Stopping display manager [+0.09s] DEBUG: Display manager stopped [+0.09s] DEBUG: Stopping daemon [+0.09s] DEBUG: Exiting with return value 1