[CentOS] CentOS 8 Broken Installation

Thu Oct 3 11:43:44 UTC 2019
Günther J. Niederwimmer <gjn at gjn.priv.at>

Hello,

Am Donnerstag, 3. Oktober 2019, 01:41:59 CEST schrieb Akemi Yagi:
> On Wed, Oct 2, 2019 at 4:10 PM Akemi Yagi <amyagi at gmail.com> wrote:
> > On Wed, Oct 2, 2019 at 3:35 PM Günther J. Niederwimmer <gjn at gjn.priv.at> 
wrote:
> > > This Board have 2 Controller!°
> > > 00:1f.2 RAID bus controller: Intel Corporation C600/X79 series chipset
> > > SATA
> > > RAID Controller (rev 06)
> > > 
> > > On this controller all drives are found and it is possible to create a
> > > Raid1!
> > > 
> > > 07:00.0 Serial Attached SCSI controller: Intel Corporation C602 chipset
> > > 4-Port SATA Storage Control Unit (rev 06)
> > > 
> > > But on this Contoller NO drives found?
> > 
> > If you provide the device ID pairing [xxxx:yyyy] for the one that is
> > not working, it will become clear. Can you show us the output from:
> > 
> > lspci -nn
> > 
> > Is it this one?
> > 
> > Serial Attached SCSI controller [0107]: Intel Corporation C602 chipset
> > 4-Port SATA Storage Control Unit [8086:1d6b]
> > 
> > If so, the above device ID [8086:1d6b] is not supported in RHEL/CentOS
> > 8, unfortunately.
> > 
> > Akemi
> 
> And if that is indeed your device, that was bad news. But you have
> good news too.
> 
> Device [8086:1d6b] is supported by the isci kernel module. ELRepo has
> a DUD for this driver: dd-isci-1.2.0-1.el8.elrepo.iso
> 
> Ljubomir provided detailed instructions on how to use ELRepo's DUD
> isos earlier in this thread.

OK, I will test it!

Thanks fort the help and answers, 

-- 
mit freundlichen Grüssen / best regards,

  Günther J. Niederwimmer