[CentOS] Bridge network for virt-manager

Wed Jun 3 03:44:27 UTC 2020
Orion Poplawski <orion at nwra.com>

On 6/2/20 8:53 AM, Jerry Geis wrote:
> Ok so I have used virt-manager to create the name NET100
> This is what shows.
> 
> <network>
>    <name>NET100</name>
>    <uuid>1ba45e54-93c2-f291-8b35-a7fe8cae9ac1</uuid>
>    <forward dev='eth0' mode='nat'>
>      <interface dev='eth0'/>
>    </forward>
>    <bridge name='virbr1' stp='on' delay='0' />
>    <mac address='52:54:00:9C:39:02'/>
>    <ip address='192.168.100.1' netmask='255.255.255.0'>
>      <dhcp>
>        <range start='192.168.100.128' end='192.168.100.254' />
>      </dhcp>
>    </ip>
> </network>
> 
> I DO get a DHCP on my network  - but the client cannot connect to the host
> machine. Has access to internet - but just not the host.

This isn't a real bridged network.  This is a NATed local network.

-- 
Orion Poplawski
Manager of NWRA Technical Systems          720-772-5637
NWRA, Boulder/CoRA Office             FAX: 303-415-9702
3380 Mitchell Lane                       orion at nwra.com
Boulder, CO 80301                 https://www.nwra.com/