I have these interfaces listed.
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.8 netmask 255.255.252.0 broadcast 192.168.3.255
inet6 fe80::e2d5:5eff:fe63:abe5 prefixlen 64 scopeid 0x20<link>
ether e0:d5:5e:63:ab:e5 txqueuelen 1000 (Ethernet)
RX packets 42411243 bytes 4701898681 (4.3 GiB)
RX errors 0 dropped 156 overruns 0 frame 0
TX packets 78372982 bytes 34946337897 (32.5 GiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 16 memory 0x92f00000-92f20000
virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255
ether 52:54:00:fc:34:af txqueuelen 1000 (Ethernet)
RX packets 132792 bytes 337411780 (321.7 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 138593 bytes 742263806 (707.8 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
virbr1: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 192.168.100.1 netmask 255.255.255.0 broadcast 192.168.100.255
ether 52:54:00:9c:39:02 txqueuelen 1000 (Ethernet)
RX packets 206217 bytes 132308800 (126.1 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 105448 bytes 197008661 (187.8 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
virbr0-nic: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 52:54:00:fc:34:af txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
When I bring up virt-manager, got settings for my VM, and for "Network
Source" I select
"Specify Shared Device Name" and I have tried the virbr0 and clicked apply
and boot the machine. I get networking but not bridged networking - not a
192.168.1.X address.
Is there something I missed ?
Thanks,
Jerry