On 06/15/2020 08:58 PM, Fred Smith wrote: > On Mon, Jun 15, 2020 at 04:28:17PM -0400, H wrote: >> I just installed C7 on a new computer and despite Simple Scan being installed as part of C7, I have not been able to get it to recognize my Canon scanner connected to a USB port. I did have it running on another computer with C7 so there should not be any inherent issues. >> >> On a lark I installed gscan2pdf and sane-backends-drivers-scanners and sane-find-scanner found it: >> >> found USB scanner (vendor=0x04a9 [Canon], product=0x1908 [CanoScan]) at libusb:001:010 >> >> I perused my notes for the old computer but did not see I installed any additional software to get it going but I might be wrong. >> >> What have I missed? >> > On my C7 box, simple-scan requires libsane. try: ldd simple-scan |grep -i sane. > > # ldd /usr/bin/simple-scan | grep -i sane > libsane.so.1 => /lib64/libsane.so.1 (0x00007f3668291000) > > > ldd doesn't show any other sane dependencies, but I'd sorta think > that simple-scan would also need sane-backends as well. Here's all > the sane things I have installed, FYI: > > # ldd /usr/bin/simple-scan | grep -i sane > libsane.so.1 => /lib64/libsane.so.1 (0x00007f3668291000) > [root at fcshome log]# yum list installed | grep -i sane > libsane-hpaio.x86_64 3.15.9-5.el7 @base > sane-backends.x86_64 1.0.24-12.el7 @base > sane-backends-devel.i686 1.0.24-12.el7 @base > sane-backends-devel.x86_64 1.0.24-12.el7 @base > sane-backends-doc.noarch 1.0.24-12.el7 @base > sane-backends-drivers-cameras.i686 1.0.24-12.el7 @base > sane-backends-drivers-cameras.x86_64 1.0.24-12.el7 @base > sane-backends-drivers-scanners.i686 1.0.24-12.el7 @base > sane-backends-drivers-scanners.x86_64 1.0.24-12.el7 @base > sane-backends-libs.i686 1.0.24-12.el7 @base > sane-backends-libs.x86_64 1.0.24-12.el7 @base > sane-frontends.x86_64 1.0.14-19.el7 @base > xsane.x86_64 0.999-9.el7 @base > xsane-common.x86_64 0.999-9.el7 @base > xsane-gimp.x86_64 0.999-9.el7 @base > > also FYI, I'm using a Canon LiDE 210, which works fine for me. > > Good luck! > > Fred > I get: #ldd /usr/bin/simple-scan | grep -i sane libsane.so.1 => /lib64/libsane.so.1 (0x00007f0d4ab47000) and #yum list installed | grep -i sane perl-Sane.x86_64 0.05-8.el7.nux @nux-dextop sane-backends.x86_64 1.0.24-12.el7 @base sane-backends-drivers-scanners.x86_64 1.0.24-12.el7 @base sane-backends-libs.x86_64 1.0.24-12.el7 @base sane-frontends.x86_64 1.0.14-19.el7 @base