Hi,
is there a way to rebuild an array using ssacli with a P410?
A failed disk has been replaced and now the array is not
rebuilding like it should:
Array A (SATA, Unused Space: 1 MB)
logicaldrive 1 (14.55 TB, RAID 1+0, Ready for Rebuild)
physicaldrive 1I:0:1 (port 1I:box 0:bay 1, SATA HDD, 4 TB, OK)
physicaldrive 1I:0:2 (port 1I:box 0:bay 2, SATA HDD, 4 TB, OK)
physicaldrive 1I:0:3 (port 1I:box 0:bay 3, SATA HDD, 4 TB, OK)
physicaldrive 1I:0:4 (port 1I:box 0:bay 4, SATA HDD, 8 TB, OK)
physicaldrive 2I:0:5 (port 2I:box 0:bay 5, SATA HDD, 4 TB, OK)
physicaldrive 2I:0:6 (port 2I:box 0:bay 6, SATA HDD, 4 TB, OK)
physicaldrive 2I:0:7 (port 2I:box 0:bay 7, SATA HDD, 4 TB, OK)
physicaldrive 2I:0:8 (port 2I:box 0:bay 8, SATA HDD, 4 TB, OK)
I'd expect the rebuild to start automatically after 1I:0:4 was replaced.
Is the new drive being larger than the old one (4-->8) causing issues?