Hi, I am curious, what config your /etc/grub2.cfg looks like? does it have the correct root partition specified under "set root=" or in linux option or how it looks in boot loader during a start? Thanks On Mon, 16 Nov 2020 at 08:41, Łukasz Posadowski <mail at lukaszposadowski.pl> wrote: > Sun, 15 Nov 2020 14:16:48 -0800 > Gordon Messmer <gordon.messmer at gmail.com>: > > > On 11/15/20 3:32 AM, Łukasz Posadowski wrote: > > > Do anyone can suggest what else I forgot to do? > > > > > > Use metadata version 1.2 instead of 0.9. > > > > You need for the filesystem to be not visible until after the RAID is > > assembled, and the easiest way to do that is to put the metadata at > > the beginning of the drive and the partition table inside the RAID > > volume. > > > > With metadata version 0.9, the partition table is technically inside > > the volume, but it's at the same offset that it would be for a disk > > with no RAID volume, so it can be recognized before the volume is > > assembled. > > Thanks, I'll try that. I'm use to metadata 0.9, because GRUB have > (had?) some issue with the newer ones. > > -- > Łukasz Posadowski > _______________________________________________ > CentOS mailing list > CentOS at centos.org > https://lists.centos.org/mailman/listinfo/centos > -- Ruslanas Gžibovskis +370 6030 7030