[CentOS] Logitech C922 webcam

Thu Oct 1 15:58:11 UTC 2020
Bruce Ferrell <bferrell at baywinds.org>

On 9/30/20 8:52 AM, H wrote:
> 00:14.0 USB controller: Intel Corporation 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller
My system has these:

00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)

lspci -s 00:14.0 -v
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05) (prog-if 30 [XHCI])
         Subsystem: ASUSTeK Computer Inc. Device 201f
         Flags: bus master, medium devsel, latency 0, IRQ 25
         Memory at dd600000 (64-bit, non-prefetchable) [size=64K]
         Capabilities: [70] Power Management version 2
         Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
         Kernel driver in use: xhci_hcd
         Kernel modules: xhci_pci

lspci -s 00:1a.0 -v
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05) (prog-if 20 [EHCI])
         Subsystem: ASUSTeK Computer Inc. Device 201f
         Flags: bus master, medium devsel, latency 0, IRQ 16
         Memory at dd618000 (32-bit, non-prefetchable) [size=1K]
         Capabilities: [50] Power Management version 2
         Capabilities: [58] Debug port: BAR=1 offset=00a0
         Capabilities: [98] PCI Advanced Features
         Kernel driver in use: ehci-pci
         Kernel modules: ehci_pci

lspci -s 00:1d.0 -v
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05) (prog-if 20 [EHCI])
         Subsystem: ASUSTeK Computer Inc. Device 201f
         Flags: bus master, medium devsel, latency 0, IRQ 23
         Memory at dd617000 (32-bit, non-prefetchable) [size=1K]
         Capabilities: [50] Power Management version 2
         Capabilities: [58] Debug port: BAR=1 offset=00a0
         Capabilities: [98] PCI Advanced Features
         Kernel driver in use: ehci-pci
         Kernel modules: ehci_pci

These are my kernel modules:

lsmod | grep usb
btusb                  53248  0
btrtl                  16384  1 btusb
btbcm                  16384  1 btusb
btintel                20480  1 btusb
bluetooth             589824  41 btrtl,btintel,bnep,btbcm,rfcomm,btusb
snd_usb_audio         278528  1
snd_usbmidi_lib        36864  1 snd_usb_audio
snd_hwdep              16384  2 snd_hda_codec,snd_usb_audio
snd_rawmidi            40960  1 snd_usbmidi_lib
snd_pcm               143360  5 snd_hda_intel,snd_hda_codec,snd_usb_audio,snd_hda_core,snd_hda_codec_hdmi
snd                    98304  23 
snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_usb_audio,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_usbmidi_lib,snd_seq_device,snd_hda_codec_realtek,snd_pcm
usbhid                 57344  0
usbcore               290816  9 uvcvideo,usbhid,snd_usb_audio,ehci_hcd,xhci_pci,snd_usbmidi_lib,btusb,xhci_hcd,ehci_pci


This line is important:

usbcore               290816  9 uvcvideo,usbhid,snd_usb_audio,ehci_hcd,xhci_pci,snd_usbmidi_lib,btusb,xhci_hcd,ehci_pci

Notice the last two entries:  xhci_hcd and ehci_pci

Those correspond to:

   for my two usb 2 controllers:

         Kernel driver in use: xhci_hcd
         Kernel modules: xhci_pci

   for my single usb 3 controller:

         Kernel driver in use: xhci_hcd
         Kernel modules: xhci_pci


from your lspci:

00:14.0 USB controller: Intel Corporation 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller

This is the sole USB controller in your system and it's a USB 3 controller

so... in your case let's do:

sudo lspci -s 00:14.0 -v

then try:

sudo modprobe usbcore

and repeat:

sudo lspci -s 00:14.0 -v

see if the Kernel driver/module lines change.  If they do, plug the camera in and check for it to be recognized in lsusb