Hi guys. Hoping some net experts my stumble upon this message, I have an IPoIB direct host to host connection and: -> $ ethtool ib1 Settings for ib1: Supported ports: [ ] Supported link modes: Not reported Supported pause frame use: No Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 40000Mb/s Duplex: Full Auto-negotiation: on Port: Other PHYAD: 255 Transceiver: internal Link detected: yes and that's both ends, both hosts, yet: > $ iperf3 -c 10.5.5.97 Connecting to host 10.5.5.97, port 5201 [ 5] local 10.5.5.49 port 56874 connected to 10.5.5.97 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 1.36 GBytes 11.6 Gbits/sec 0 2.50 MBytes [ 5] 1.00-2.00 sec 1.87 GBytes 16.0 Gbits/sec 0 2.50 MBytes [ 5] 2.00-3.00 sec 1.84 GBytes 15.8 Gbits/sec 0 2.50 MBytes [ 5] 3.00-4.00 sec 1.83 GBytes 15.7 Gbits/sec 0 2.50 MBytes [ 5] 4.00-5.00 sec 1.61 GBytes 13.9 Gbits/sec 0 2.50 MBytes [ 5] 5.00-6.00 sec 1.60 GBytes 13.8 Gbits/sec 0 2.50 MBytes [ 5] 6.00-7.00 sec 1.56 GBytes 13.4 Gbits/sec 0 2.50 MBytes [ 5] 7.00-8.00 sec 1.52 GBytes 13.1 Gbits/sec 0 2.50 MBytes [ 5] 8.00-9.00 sec 1.52 GBytes 13.1 Gbits/sec 0 2.50 MBytes [ 5] 9.00-10.00 sec 1.52 GBytes 13.1 Gbits/sec 0 2.50 MBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 16.2 GBytes 13.9 Gbits/sec 0 sender [ 5] 0.00-10.00 sec 16.2 GBytes 13.9 Gbits/sec receiver It's rather an oldish platform which hosts the link, PCIe is only 2.0 but with link of x8 that should be able to carry more than ~13Gbits/sec. Infiniband is Mellanox's ConnectX-3. Any thoughts on how to track the bottleneck or any thoughts I'll appreciate much. thanks, L