On Wed, 31 Mar 2021 at 05:11, Nicolas Kovacs <info at microlinux.fr> wrote: > Hi, > > More often than not, when installing CentOS, I choose manual partitioning > and > then apply the KISS principle, with a very simple partitioning scheme that > looks more or less like this: > > * /boot partition: 500 MB, ext2 > * swap partition: equivalent to amount of RAM > * root partition: available space, ext4 > > Now when I do this, Anaconda insists on switching my swap and root > partitions, > so instead of this: > > * /dev/sda1: boot partition > * /dev/sda2: swap partition > * /dev/sda3: root partition > > ... I get this: > > * /dev/sda1: boot partition > * /dev/sda2: root partition > * /dev/sda3: swap partition > > Up until now this hasn't bothered me much. But for my needs right now it > does, > because I need my root partition to be at the end of the disk, so it can be > expanded later on. > > Anyone knows how I can prevent Anaconda from switching my root and swap > partitions? What I'm doing right now is switching to a text console with > Ctrl-Alt-F5, manually partition using fdisk, switch back to Anaconda and > then > rescan the disk, but it's quite a PITA. > > These are the moments where I miss the good old bone-headed Slackware > installer. :o) > > Cheers, > > Since you are doing manual vs kickstart, you need to do additional steps Before you go into the disk system in the UI Control-Alt-F2 fdisk (or gfdisk or parted depending on your prefs and needs) clear the disk and set it up how you want it with the types set on each partition. go back into the UI and do the things you wanted. have it reread the disks and have it use the existing partitions versus anything else Option 2 is to go into the advanced partitioning tool blivet and see if it can be done through that.. but I think you still need to do a 'slackware/arch' setup first -- Stephen J Smoogen.