[CentOS] Update 4.2 broke LVM
Kevin Krieser
k_krieser at sbcglobal.net
Mon Oct 17 17:23:50 UTC 2005
I just came home for lunch to check my system (I did a fresh 4.0
install yesterday, downloaded the updates overnight, and applied them
this morning). After the reboot, it failed again.
At least, while it was at 4.0, I was able to backup the entire /home
directory to USB disk (this is all personal stuff).
NOT giving me a warm fuzzy feeling about using LVM. This is supposed
to be enterprise ready?
The appropriate parts of /var/log/messages of my last boot is
attached. When trying to mount from the command line, I get the
following error:
/dev/mapper/VolGroup00-LogVol00: Invalid argument
mount: /dev/mapper/VolGroup00-LogVol00: can't read superblock
Oct 17 11:59:54 centos4 syslogd 1.4.1: restart.
Oct 17 11:59:54 centos4 syslog: syslogd startup succeeded
Oct 17 11:59:54 centos4 kernel: klogd 1.4.1, log source = /proc/kmsg
started.
Oct 17 11:59:54 centos4 kernel: Linux version 2.6.9-22.EL
(buildcentos at louisa.home.local) (gcc version 3.4.4 20050721 (Red Hat
3.4.4-2)) #1 Sat Oct 8 17:48:27 CDT 2005
Oct 17 11:59:54 centos4 kernel: BIOS-provided physical RAM map:
Oct 17 11:59:54 centos4 kernel: BIOS-e820: 0000000000000000 -
000000000009fc00 (usable)
Oct 17 11:59:54 centos4 kernel: BIOS-e820: 000000000009fc00 -
00000000000a0000 (reserved)
Oct 17 11:59:54 centos4 kernel: BIOS-e820: 00000000000cc000 -
00000000000d2000 (reserved)
Oct 17 11:59:54 centos4 kernel: BIOS-e820: 00000000000f0000 -
0000000000100000 (reserved)
Oct 17 11:59:54 centos4 kernel: BIOS-e820: 0000000000100000 -
000000001fff0000 (usable)
Oct 17 11:59:54 centos4 kernel: BIOS-e820: 000000001fff0000 -
000000001fff8000 (ACPI data)
Oct 17 11:59:54 centos4 kernel: BIOS-e820: 000000001fff8000 -
0000000020000000 (ACPI NVS)
Oct 17 11:59:54 centos4 kernel: BIOS-e820: 00000000fec00000 -
00000000fec01000 (reserved)
Oct 17 11:59:54 centos4 kernel: BIOS-e820: 00000000fee00000 -
00000000fee01000 (reserved)
Oct 17 11:59:54 centos4 syslog: klogd startup succeeded
Oct 17 11:59:54 centos4 kernel: BIOS-e820: 00000000fffc0000 -
0000000100000000 (reserved)
Oct 17 11:59:54 centos4 kernel: 0MB HIGHMEM available.
Oct 17 11:59:54 centos4 kernel: 511MB LOWMEM available.
Oct 17 11:59:54 centos4 kernel: zapping low mappings.
Oct 17 11:59:54 centos4 kernel: DMI 2.3 present.
Oct 17 11:59:54 centos4 irqbalance: irqbalance startup succeeded
Oct 17 11:59:54 centos4 kernel: ACPI: PM-Timer IO Port: 0x808
Oct 17 11:59:54 centos4 kernel: Built 1 zonelists
Oct 17 11:59:54 centos4 kernel: Kernel command line: ro root=LABEL=/
rhgb quiet
Oct 17 11:59:54 centos4 kernel: Initializing CPU#0
Oct 17 11:59:54 centos4 kernel: CPU 0 irqstacks, hard=c03e5000
soft=c03e4000
Oct 17 11:59:54 centos4 kernel: PID hash table entries: 2048 (order:
11, 32768 bytes)
Oct 17 11:59:54 centos4 kernel: Detected 2008.779 MHz processor.
Oct 17 11:59:54 centos4 kernel: Using tsc for high-res timesource
Oct 17 11:59:54 centos4 kernel: Console: colour VGA+ 80x25
Oct 17 11:59:54 centos4 kernel: Dentry cache hash table entries:
131072 (order: 7, 524288 bytes)
Oct 17 11:59:54 centos4 kernel: Inode-cache hash table entries: 65536
(order: 6, 262144 bytes)
Oct 17 11:59:54 centos4 kernel: Memory: 514880k/524224k available
(2111k kernel code, 8720k reserved, 667k data, 144k init, 0k highmem)
Oct 17 11:59:54 centos4 kernel: Security Scaffold v1.0.0 initialized
Oct 17 11:59:54 centos4 portmap: portmap startup succeeded
Oct 17 11:59:55 centos4 kernel: SELinux: Initializing.
Oct 17 11:59:55 centos4 kernel: SELinux: Starting in permissive mode
Oct 17 11:59:55 centos4 kernel: There is already a security framework
initialized, register_security failed.
Oct 17 11:59:55 centos4 kernel: selinux_register_security:
Registering secondary module capability
Oct 17 11:59:55 centos4 kernel: Capability LSM initialized as secondary
Oct 17 11:59:55 centos4 kernel: Mount-cache hash table entries: 512
(order: 0, 4096 bytes)
Oct 17 11:59:55 centos4 kernel: CPU: CLK_CTL MSR was 6003d22f.
Reprogramming to 2003d22f
Oct 17 11:59:55 centos4 kernel: CPU: L1 I Cache: 64K (64 bytes/line),
D cache 64K (64 bytes/line)
Oct 17 11:59:55 centos4 kernel: CPU: L2 Cache: 256K (64 bytes/line)
Oct 17 11:59:55 centos4 kernel: Intel machine check architecture
supported.
Oct 17 11:59:55 centos4 kernel: Intel machine check reporting enabled
on CPU#0.
Oct 17 11:59:55 centos4 kernel: CPU: AMD Athlon(tm) XP 2400+ stepping 01
Oct 17 11:59:55 centos4 kernel: Enabling fast FPU save and restore...
done.
Oct 17 11:59:55 centos4 kernel: Enabling unmasked SIMD FPU exception
support... done.
Oct 17 11:59:55 centos4 kernel: Checking 'hlt' instruction... OK.
Oct 17 11:59:55 centos4 kernel: ACPI: IRQ9 SCI: Edge set to Level
Trigger.
Oct 17 11:59:55 centos4 kernel: checking if image is initramfs... it is
Oct 17 11:59:55 centos4 kernel: Freeing initrd memory: 412k freed
Oct 17 11:59:55 centos4 kernel: NET: Registered protocol family 16
Oct 17 11:59:55 centos4 kernel: PCI: PCI BIOS revision 2.10 entry at
0xfdb01, last bus=1
Oct 17 11:59:55 centos4 kernel: PCI: Using configuration type 1
Oct 17 11:59:55 centos4 kernel: mtrr: v2.0 (20020519)
Oct 17 11:59:55 centos4 rpc.statd[2637]: Version 1.0.6 Starting
Oct 17 11:59:55 centos4 kernel: ACPI: Subsystem revision 20040816
Oct 17 11:59:55 centos4 kernel: ACPI: Interpreter enabled
Oct 17 11:59:55 centos4 kernel: ACPI: Using PIC for interrupt routing
Oct 17 11:59:55 centos4 nfslock: rpc.statd startup succeeded
Oct 17 11:59:55 centos4 kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Oct 17 11:59:55 centos4 kernel: PCI: Probing PCI hardware (bus 00)
Oct 17 11:59:55 centos4 kernel: ACPI: Power Resource [URP1] (off)
Oct 17 11:59:55 centos4 kernel: ACPI: Power Resource [URP2] (off)
Oct 17 11:59:55 centos4 kernel: ACPI: Power Resource [FDDP] (off)
Oct 17 11:59:55 centos4 kernel: ACPI: Power Resource [LPTP] (off)
Oct 17 11:59:55 centos4 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs
3 4 5 6 7 10 *11 12 14 15)
Oct 17 11:59:55 centos4 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs
3 4 5 6 7 *10 11 12 14 15)
Oct 17 11:59:55 centos4 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs
3 4 5 6 7 10 *11 12 14 15)
Oct 17 11:59:55 centos4 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs
3 4 5 6 7 *10 11 12 14 15)
Oct 17 11:59:55 centos4 kernel: Linux Plug and Play Support v0.97 (c)
Adam Belay
Oct 17 11:59:55 centos4 kernel: usbcore: registered new driver usbfs
Oct 17 11:59:55 centos4 kernel: usbcore: registered new driver hub
Oct 17 11:59:55 centos4 kernel: PCI: Using ACPI for IRQ routing
Oct 17 11:59:55 centos4 kernel: ACPI: PCI Interrupt Link [LNKB]
enabled at IRQ 10
Oct 17 11:59:55 centos4 kernel: ACPI: PCI interrupt 0000:00:08.0[A] -
> GSI 10 (level, low) -> IRQ 10
Oct 17 11:59:55 centos4 kernel: ACPI: PCI Interrupt Link [LNKC]
enabled at IRQ 11
Oct 17 11:59:55 centos4 kernel: ACPI: PCI interrupt 0000:00:0a.0[A] -
> GSI 11 (level, low) -> IRQ 11
Oct 17 11:59:55 centos4 kernel: ACPI: PCI Interrupt Link [LNKD]
enabled at IRQ 10
Oct 17 11:59:55 centos4 kernel: ACPI: PCI interrupt 0000:00:0f.0[A] -
> GSI 10 (level, low) -> IRQ 10
Oct 17 11:59:55 centos4 kernel: ACPI: PCI interrupt 0000:00:11.1[A]:
no GSI
Oct 17 11:59:55 centos4 kernel: ACPI: PCI interrupt 0000:00:11.2[D] -
> GSI 10 (level, low) -> IRQ 10
Oct 17 11:59:55 centos4 kernel: ACPI: PCI interrupt 0000:00:11.3[D] -
> GSI 10 (level, low) -> IRQ 10
Oct 17 11:59:55 centos4 kernel: ACPI: PCI interrupt 0000:00:13.0[A] -
> GSI 11 (level, low) -> IRQ 11
Oct 17 11:59:55 centos4 kernel: ACPI: PCI Interrupt Link [LNKA]
enabled at IRQ 11
Oct 17 11:59:55 centos4 kernel: ACPI: PCI interrupt 0000:00:14.0[A] -
> GSI 11 (level, low) -> IRQ 11
Oct 17 11:59:55 centos4 kernel: ACPI: PCI interrupt 0000:00:14.1[B] -
> GSI 10 (level, low) -> IRQ 10
Oct 17 11:59:55 centos4 kernel: ACPI: PCI interrupt 0000:00:14.2[C] -
> GSI 11 (level, low) -> IRQ 11
Oct 17 11:59:55 centos4 kernel: ACPI: PCI interrupt 0000:01:00.0[A] -
> GSI 11 (level, low) -> IRQ 11
Oct 17 11:59:55 centos4 kernel: apm: BIOS version 1.2 Flags 0x03
(Driver version 1.16ac)
Oct 17 11:59:55 centos4 kernel: apm: overridden by ACPI.
Oct 17 11:59:55 centos4 kernel: audit: initializing netlink socket
(disabled)
Oct 17 11:59:55 centos4 kernel: audit(1129568349.366:1): initialized
Oct 17 11:59:55 centos4 kernel: Total HugeTLB memory allocated, 0
Oct 17 11:59:55 centos4 kernel: VFS: Disk quotas dquot_6.5.1
Oct 17 11:59:55 centos4 kernel: Dquot-cache hash table entries: 1024
(order 0, 4096 bytes)
Oct 17 11:59:55 centos4 kernel: SELinux: Registering netfilter hooks
Oct 17 11:59:55 centos4 kernel: Initializing Cryptographic API
Oct 17 11:59:55 centos4 kernel: ksign: Installing public key data
Oct 17 11:59:55 centos4 kernel: Loading keyring
Oct 17 11:59:55 centos4 kernel: - Added public key 96428ECEA41BBD9D
Oct 17 11:59:55 centos4 kernel: - User ID: CentOS (Kernel Module GPG
key)
Oct 17 11:59:55 centos4 kernel: pci_hotplug: PCI Hot Plug PCI Core
version: 0.5
Oct 17 11:59:55 centos4 kernel: ACPI: Processor [CPU1] (supports C1,
16 throttling states)
Oct 17 11:59:55 centos4 kernel: Real Time Clock Driver v1.12
Oct 17 11:59:55 centos4 kernel: Linux agpgart interface v0.100 (c)
Dave Jones
Oct 17 11:59:55 centos4 kernel: agpgart: Detected VIA KT266/KY266x/
KT333 chipset
Oct 17 11:59:55 centos4 kernel: agpgart: Maximum main memory to use
for agp memory: 439M
Oct 17 11:59:55 centos4 kernel: agpgart: AGP aperture is 128M @
0xe0000000
Oct 17 11:59:55 centos4 kernel: serio: i8042 AUX port at 0x60,0x64
irq 12
Oct 17 11:59:55 centos4 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 17 11:59:55 centos4 kernel: Serial: 8250/16550 driver $Revision:
1.90 $ 8 ports, IRQ sharing enabled
Oct 17 11:59:55 centos4 kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 17 11:59:55 centos4 kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Oct 17 11:59:55 centos4 kernel: RAMDISK driver initialized: 16 RAM
disks of 16384K size 1024 blocksize
Oct 17 11:59:55 centos4 kernel: Uniform Multi-Platform E-IDE driver
Revision: 7.00alpha2
Oct 17 11:59:55 centos4 kernel: ide: Assuming 33MHz system bus speed
for PIO modes; override with idebus=xx
Oct 17 11:59:55 centos4 kernel: PDC20276: IDE controller at PCI slot
0000:00:0f.0
Oct 17 11:59:56 centos4 kernel: ACPI: PCI interrupt 0000:00:0f.0[A] -
> GSI 10 (level, low) -> IRQ 10
Oct 17 11:59:56 centos4 kernel: PDC20276: chipset revision 1
Oct 17 11:59:56 centos4 kernel: PDC20276: 100% native mode on irq 10
Oct 17 11:59:56 centos4 kernel: ide2: BM-DMA at 0xdc00-0xdc07,
BIOS settings: hde:pio, hdf:pio
Oct 17 11:59:56 centos4 rpcidmapd: rpc.idmapd startup succeeded
Oct 17 11:59:56 centos4 kernel: ide3: BM-DMA at 0xdc08-0xdc0f,
BIOS settings: hdg:pio, hdh:pio
Oct 17 11:59:56 centos4 kernel: hde: WDC WD1000BB-32CCB0, ATA DISK drive
Oct 17 11:59:56 centos4 kernel: Using cfq io scheduler
Oct 17 11:59:56 centos4 kernel: ide2 at 0xec00-0xec07,0xe802 on irq 10
Oct 17 11:59:56 centos4 kernel: hdg: WDC WD1600JB-00DUA1, ATA DISK drive
Oct 17 11:59:56 centos4 kernel: ide3 at 0xe400-0xe407,0xe002 on irq 10
Oct 17 11:59:56 centos4 kernel: VP_IDE: IDE controller at PCI slot
0000:00:11.1
Oct 17 11:59:56 centos4 kernel: ACPI: PCI interrupt 0000:00:11.1[A]:
no GSI
Oct 17 11:59:56 centos4 kernel: VP_IDE: chipset revision 6
Oct 17 11:59:56 centos4 kernel: VP_IDE: not 100% native mode: will
probe irqs later
Oct 17 11:59:56 centos4 kernel: VP_IDE: VIA vt8233a (rev 00) IDE
UDMA133 controller on pci0000:00:11.1
Oct 17 11:59:56 centos4 kernel: ide0: BM-DMA at 0xfc00-0xfc07,
BIOS settings: hda:DMA, hdb:pio
Oct 17 11:59:56 centos4 kernel: ide1: BM-DMA at 0xfc08-0xfc0f,
BIOS settings: hdc:DMA, hdd:pio
Oct 17 11:59:56 centos4 kernel: hda: IC35L040AVER07-0, ATA DISK drive
Oct 17 11:59:56 centos4 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct 17 11:59:56 centos4 kernel: hdc: LITE-ON DVDRW SOHW-1693S, ATAPI
CD/DVD-ROM drive
Oct 17 11:59:56 centos4 kernel: ide1 at 0x170-0x177,0x376 on irq 15
Oct 17 11:59:56 centos4 kernel: hde: max request size: 128KiB
Oct 17 11:59:56 centos4 kernel: hde: 195371568 sectors (100030 MB) w/
2048KiB Cache, CHS=65535/16/63, UDMA(100)
Oct 17 11:59:56 centos4 kernel: hde: hde1
Oct 17 11:59:56 centos4 kernel: hdg: max request size: 1024KiB
Oct 17 11:59:56 centos4 kernel: hdg: 312581808 sectors (160041 MB) w/
8192KiB Cache, CHS=19457/255/63, UDMA(100)
Oct 17 11:59:56 centos4 kernel: hdg: hdg1
Oct 17 11:59:56 centos4 kernel: hda: max request size: 128KiB
Oct 17 11:59:56 centos4 kernel: hda: 80418240 sectors (41174 MB) w/
1916KiB Cache, CHS=65535/16/63, UDMA(100)
Oct 17 11:59:56 centos4 kernel: hda: hda1 hda2 hda3 hda4 < hda5 >
Oct 17 11:59:56 centos4 kernel: hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW
drive, 2048kB Cache
Oct 17 11:59:56 centos4 kernel: Uniform CD-ROM driver Revision: 3.20
Oct 17 11:59:56 centos4 kernel: ide-floppy driver 0.99.newide
Oct 17 11:59:56 centos4 kernel: usbcore: registered new driver hiddev
Oct 17 11:59:56 centos4 kernel: usbcore: registered new driver usbhid
Oct 17 11:59:56 centos4 kernel: drivers/usb/input/hid-core.c:
v2.0:USB HID core driver
Oct 17 11:59:56 centos4 kernel: mice: PS/2 mouse device common for
all mice
Oct 17 11:59:56 centos4 kernel: input: AT Translated Set 2 keyboard
on isa0060/serio0
Oct 17 11:59:56 centos4 kernel: md: md driver 0.90.0 MAX_MD_DEVS=256,
MD_SB_DISKS=27
Oct 17 11:59:56 centos4 kernel: NET: Registered protocol family 2
Oct 17 11:59:56 centos4 kernel: IP: routing cache hash table of 1024
buckets, 32Kbytes
Oct 17 11:59:56 centos4 kernel: TCP: Hash tables configured
(established 32768 bind 9362)
Oct 17 11:59:56 centos4 kernel: Initializing IPsec netlink socket
Oct 17 11:59:56 centos4 kernel: NET: Registered protocol family 1
Oct 17 11:59:56 centos4 kernel: NET: Registered protocol family 17
Oct 17 11:59:56 centos4 kernel: ACPI: (supports S0 S1 S4 S5)
Oct 17 11:59:56 centos4 kernel: ACPI wakeup devices:
Oct 17 11:59:56 centos4 kernel: PCI0 UAR1 USB4 USB5 USB USB1 AC9 MC9
Oct 17 11:59:56 centos4 kernel: Freeing unused kernel memory: 144k freed
Oct 17 11:59:56 centos4 kernel: device-mapper: 4.4.0-ioctl
(2005-01-12) initialised: dm-devel at redhat.com
Oct 17 11:59:56 centos4 kernel: kjournald starting. Commit interval
5 seconds
Oct 17 11:59:56 centos4 kernel: EXT3-fs: mounted filesystem with
ordered data mode.
Oct 17 11:59:56 centos4 kernel: security: 3 users, 4 roles, 349
types, 25 bools
Oct 17 11:59:56 centos4 netfs: Mounting other filesystems: succeeded
Oct 17 11:59:56 centos4 kernel: security: 55 classes, 18746 rules
Oct 17 11:59:56 centos4 kernel: SELinux: Completing initialization.
Oct 17 11:59:56 centos4 kernel: SELinux: Setting up existing
superblocks.
Oct 17 11:59:56 centos4 kernel: SELinux: initialized (dev hda5, type
ext3), uses xattr
Oct 17 11:59:56 centos4 kernel: SELinux: initialized (dev tmpfs, type
tmpfs), uses transition SIDs
Oct 17 11:59:56 centos4 kernel: SELinux: initialized (dev selinuxfs,
type selinuxfs), uses genfs_contexts
Oct 17 11:59:56 centos4 kernel: SELinux: initialized (dev mqueue,
type mqueue), not configured for labeling
Oct 17 11:59:56 centos4 kernel: SELinux: initialized (dev hugetlbfs,
type hugetlbfs), not configured for labeling
Oct 17 11:59:56 centos4 kernel: SELinux: initialized (dev devpts,
type devpts), uses transition SIDs
Oct 17 11:59:56 centos4 kernel: SELinux: initialized (dev
eventpollfs, type eventpollfs), uses genfs_contexts
Oct 17 11:59:56 centos4 kernel: SELinux: initialized (dev pipefs,
type pipefs), uses task SIDs
Oct 17 11:59:56 centos4 kernel: SELinux: initialized (dev tmpfs, type
tmpfs), uses transition SIDs
Oct 17 11:59:56 centos4 kernel: SELinux: initialized (dev futexfs,
type futexfs), uses genfs_contexts
Oct 17 11:59:56 centos4 kernel: SELinux: initialized (dev sockfs,
type sockfs), uses task SIDs
Oct 17 11:59:56 centos4 kernel: SELinux: initialized (dev proc, type
proc), uses genfs_contexts
Oct 17 11:59:56 centos4 kernel: SELinux: initialized (dev bdev, type
bdev), uses genfs_contexts
Oct 17 11:59:56 centos4 kernel: SELinux: initialized (dev rootfs,
type rootfs), uses genfs_contexts
Oct 17 11:59:56 centos4 kernel: SELinux: initialized (dev sysfs, type
sysfs), uses genfs_contexts
Oct 17 11:59:56 centos4 kernel: SELinux: initialized (dev usbfs, type
usbfs), uses genfs_contexts
Oct 17 11:59:56 centos4 kernel: inserting floppy driver for 2.6.9-22.EL
Oct 17 11:59:56 centos4 kernel: Floppy drive(s): fd0 is 1.44M
Oct 17 11:59:56 centos4 kernel: FDC 0 is a post-1991 82077
Oct 17 11:59:56 centos4 rc: Starting lm_sensors: succeeded
Oct 17 11:59:56 centos4 kernel: 8139too Fast Ethernet driver 0.9.27
Oct 17 11:59:56 centos4 kernel: ACPI: PCI interrupt 0000:00:13.0[A] -
> GSI 11 (level, low) -> IRQ 11
Oct 17 11:59:56 centos4 kernel: eth0: RealTek RTL8139 at 0xc800,
00:20:ed:26:76:3b, IRQ 11
Oct 17 11:59:56 centos4 kernel: ACPI: PCI interrupt 0000:00:08.0[A] -
> GSI 10 (level, low) -> IRQ 10
Oct 17 11:59:56 centos4 kernel: pciehp: Both _OSC and OSHP methods do
not exist
Oct 17 11:59:56 centos4 kernel: ACPI: PCI interrupt 0000:00:14.2[C] -
> GSI 11 (level, low) -> IRQ 11
Oct 17 11:59:56 centos4 kernel: ehci_hcd 0000:00:14.2: EHCI Host
Controller
Oct 17 11:59:56 centos4 kernel: ehci_hcd 0000:00:14.2: irq 11, pci
mem e083c600
Oct 17 11:59:56 centos4 kernel: SELinux: initialized (dev usbdevfs,
type usbdevfs), uses genfs_contexts
Oct 17 11:59:56 centos4 kernel: ehci_hcd 0000:00:14.2: new USB bus
registered, assigned bus number 1
Oct 17 11:59:56 centos4 kernel: ehci_hcd 0000:00:14.2: USB 2.0
enabled, EHCI 0.95, driver 2004-May-10
Oct 17 11:59:56 centos4 kernel: hub 1-0:1.0: USB hub found
Oct 17 11:59:56 centos4 kernel: hub 1-0:1.0: 4 ports detected
Oct 17 11:59:56 centos4 kernel: USB Universal Host Controller
Interface driver v2.2
Oct 17 11:59:56 centos4 kernel: ACPI: PCI interrupt 0000:00:11.2[D] -
> GSI 10 (level, low) -> IRQ 10
Oct 17 11:59:56 centos4 kernel: uhci_hcd 0000:00:11.2: UHCI Host
Controller
Oct 17 11:59:56 centos4 kernel: uhci_hcd 0000:00:11.2: irq 10, io
base 0000d000
Oct 17 11:59:56 centos4 kernel: uhci_hcd 0000:00:11.2: new USB bus
registered, assigned bus number 2
Oct 17 11:59:56 centos4 autofs: automount startup succeeded
Oct 17 11:59:56 centos4 kernel: hub 2-0:1.0: USB hub found
Oct 17 11:59:56 centos4 kernel: hub 2-0:1.0: 2 ports detected
Oct 17 11:59:56 centos4 kernel: ACPI: PCI interrupt 0000:00:11.3[D] -
> GSI 10 (level, low) -> IRQ 10
Oct 17 11:59:56 centos4 kernel: uhci_hcd 0000:00:11.3: UHCI Host
Controller
Oct 17 11:59:19 centos4 rc.sysinit: -e
Oct 17 11:59:57 centos4 kernel: uhci_hcd 0000:00:11.3: irq 10, io
base 0000cc00
Oct 17 11:59:21 centos4 start_udev: Starting udev: succeeded
Oct 17 11:59:57 centos4 smartd[2745]: smartd version 5.33 [i686-
redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Oct 17 11:59:57 centos4 kernel: uhci_hcd 0000:00:11.3: new USB bus
registered, assigned bus number 3
Oct 17 11:59:22 centos4 udevsend[1023]: starting udevd daemon
Oct 17 11:59:57 centos4 smartd[2745]: Home page is http://
smartmontools.sourceforge.net/
Oct 17 11:59:57 centos4 kernel: hub 3-0:1.0: USB hub found
Oct 17 11:59:25 centos4 rc.sysinit: -e
Oct 17 11:59:57 centos4 smartd[2745]: Opened configuration file /etc/
smartd.conf
Oct 17 11:59:57 centos4 kernel: hub 3-0:1.0: 2 ports detected
Oct 17 11:59:27 centos4 scsi.agent[1538]: disk at /devices/
pci0000:00/0000:00:14.2/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0
Oct 17 11:59:57 centos4 smartd[2745]: Configuration file /etc/
smartd.conf parsed.
Oct 17 11:59:57 centos4 kernel: ACPI: PCI interrupt 0000:00:14.0[A] -
> GSI 11 (level, low) -> IRQ 11
Oct 17 11:59:27 centos4 hal.hotplug[1604]: DEVPATH is not set
Oct 17 11:59:57 centos4 smartd[2745]: Device: /dev/hda, opened
Oct 17 11:59:57 centos4 kernel: uhci_hcd 0000:00:14.0: UHCI Host
Controller
Oct 17 11:59:27 centos4 hal.hotplug[1671]: DEVPATH is not set
Oct 17 11:59:57 centos4 smartd[2745]: Device: /dev/hda, found in
smartd database.
Oct 17 11:59:57 centos4 kernel: uhci_hcd 0000:00:14.0: irq 11, io
base 0000c400
Oct 17 11:59:28 centos4 hal.hotplug[1754]: DEVPATH is not set
Oct 17 11:59:57 centos4 kernel: uhci_hcd 0000:00:14.0: new USB bus
registered, assigned bus number 4
Oct 17 11:59:57 centos4 smartd[2745]: Device: /dev/hda, is SMART
capable. Adding to "monitor" list.
Oct 17 11:59:40 centos4 sysctl: net.ipv4.ip_forward = 0
Oct 17 11:59:57 centos4 kernel: hub 4-0:1.0: USB hub found
Oct 17 11:59:57 centos4 smartd[2745]: Device: /dev/hde, opened
Oct 17 11:59:40 centos4 sysctl: net.ipv4.conf.default.rp_filter = 1
Oct 17 11:59:57 centos4 kernel: hub 4-0:1.0: 2 ports detected
Oct 17 11:59:40 centos4 sysctl:
net.ipv4.conf.default.accept_source_route = 0
Oct 17 11:59:57 centos4 kernel: ACPI: PCI interrupt 0000:00:14.1[B] -
> GSI 10 (level, low) -> IRQ 10
Oct 17 11:59:57 centos4 smartd[2745]: Device: /dev/hde, found in
smartd database.
Oct 17 11:59:40 centos4 sysctl: kernel.sysrq = 0
Oct 17 11:59:57 centos4 kernel: uhci_hcd 0000:00:14.1: UHCI Host
Controller
Oct 17 11:59:40 centos4 sysctl: kernel.core_uses_pid = 1
Oct 17 11:59:57 centos4 kernel: usb 1-1: new high speed USB device
using address 2
Oct 17 11:59:40 centos4 rc.sysinit: Configuring kernel parameters:
succeeded
Oct 17 11:59:57 centos4 kernel: uhci_hcd 0000:00:14.1: irq 10, io
base 0000c000
Oct 17 11:59:38 centos4 date: Mon Oct 17 11:59:38 CDT 2005
Oct 17 11:59:57 centos4 kernel: uhci_hcd 0000:00:14.1: new USB bus
registered, assigned bus number 5
Oct 17 11:59:38 centos4 rc.sysinit: Setting clock (utc): Mon Oct 17
11:59:38 CDT 2005 succeeded
Oct 17 11:59:57 centos4 kernel: hub 5-0:1.0: USB hub found
Oct 17 11:59:38 centos4 rc.sysinit: Loading default keymap succeeded
Oct 17 11:59:57 centos4 kernel: hub 5-0:1.0: 2 ports detected
Oct 17 11:59:38 centos4 rc.sysinit: Setting hostname
centos4.kkrieser.homelinux.net: succeeded
Oct 17 11:59:57 centos4 kernel: md: Autodetecting RAID arrays.
Oct 17 11:59:38 centos4 rc.sysinit: Checking root filesystem succeeded
Oct 17 11:59:57 centos4 kernel: md: autorun ...
Oct 17 11:59:38 centos4 rc.sysinit: Remounting root filesystem in
read-write mode: succeeded
Oct 17 11:59:57 centos4 kernel: md: ... autorun DONE.
Oct 17 11:59:39 centos4 lvm.static: device-mapper ioctl cmd 9
failed: Invalid argument
Oct 17 11:59:57 centos4 kernel: SCSI subsystem initialized
Oct 17 11:59:39 centos4 lvm.static: Couldn't load device
'VolGroup00-LogVol00'.
Oct 17 11:59:57 centos4 kernel: Initializing USB Mass Storage driver...
Oct 17 11:59:39 centos4 lvm.static: 1 logical volume(s) in volume
group VolGroup00 now active
Oct 17 11:59:57 centos4 kernel: scsi0 : SCSI emulation for USB Mass
Storage devices
Oct 17 11:59:39 centos4 rc.sysinit: Setting up Logical Volume
Management: succeeded
Oct 17 11:59:57 centos4 kernel: Vendor: HDS72251 Model:
6VLAT80 Rev: 0 0
Oct 17 11:59:40 centos4 rc.sysinit: Checking filesystems succeeded
Oct 17 11:59:57 centos4 kernel: Type: Direct-
Access ANSI SCSI revision: 02
Oct 17 11:59:40 centos4 rc.sysinit: Mounting local filesystems:
succeeded
Oct 17 11:59:40 centos4 rc.sysinit: Enabling local filesystem
quotas: succeeded
Oct 17 11:59:57 centos4 kernel: usbcore: registered new driver usb-
storage
Oct 17 11:59:41 centos4 rc.sysinit: Enabling swap space: succeeded
Oct 17 11:59:57 centos4 kernel: USB Mass Storage support registered.
Oct 17 11:59:41 centos4 init: Entering runlevel: 5
Oct 17 11:59:57 centos4 kernel: usb 2-2: new low speed USB device
using address 2
Oct 17 11:59:41 centos4 sysstat: Calling the system activity data
collector (sadc):
Oct 17 11:59:57 centos4 kernel: SCSI device sda: 321672960 512-byte
hdwr sectors (164697 MB)
Oct 17 11:59:41 centos4 sysstat:
Oct 17 11:59:57 centos4 kernel: sda: assuming drive cache: write through
Oct 17 11:59:41 centos4 rc: Starting sysstat: succeeded
Oct 17 11:59:57 centos4 kernel: sda: sda1
Oct 17 11:59:41 centos4 readahead_early: Starting background readahead:
Oct 17 11:59:57 centos4 kernel: Attached scsi disk sda at scsi0,
channel 0, id 0, lun 0
Oct 17 11:59:42 centos4 rc: Starting readahead_early: succeeded
Oct 17 11:59:57 centos4 kernel: input: USB HID v1.10 Keyboard [CHESEN
PS2 to USB Converter] on usb-0000:00:11.2-2
Oct 17 11:59:51 centos4 kudzu: succeeded
Oct 17 11:59:57 centos4 kernel: input: USB HID v1.10 Mouse [CHESEN
PS2 to USB Converter] on usb-0000:00:11.2-2
Oct 17 11:59:51 centos4 iptables: succeeded
Oct 17 11:59:57 centos4 kernel: usb 3-2: new low speed USB device
using address 2
Oct 17 11:59:52 centos4 rc: Starting pcmcia: succeeded
Oct 17 11:59:57 centos4 kernel: input: USB HID v1.00 Mouse [Microsoft
Microsoft IntelliMouseÆ Optical] on usb-0000:00:11.3-2
Oct 17 11:59:52 centos4 sysctl: net.ipv4.ip_forward = 0
Oct 17 11:59:57 centos4 kernel: SELinux: initialized (dev ramfs, type
ramfs), uses genfs_contexts
Oct 17 11:59:52 centos4 sysctl: net.ipv4.conf.default.rp_filter = 1
Oct 17 11:59:57 centos4 kernel: NET: Registered protocol family 10
Oct 17 11:59:52 centos4 sysctl:
net.ipv4.conf.default.accept_source_route = 0
Oct 17 11:59:57 centos4 kernel: Disabled Privacy Extensions on device
c0376de0(lo)
Oct 17 11:59:52 centos4 sysctl: kernel.sysrq = 0
Oct 17 11:59:57 centos4 kernel: IPv6 over IPv4 tunneling driver
Oct 17 11:59:52 centos4 sysctl: kernel.core_uses_pid = 1
Oct 17 11:59:52 centos4 network: Setting network parameters: succeeded
Oct 17 11:59:57 centos4 kernel: drivers/usb/input/hid-input.c: event
field not found
Oct 17 11:59:52 centos4 network: Bringing up loopback interface:
succeeded
Oct 17 11:59:57 centos4 kernel: drivers/usb/input/hid-input.c: event
field not found
Oct 17 11:59:54 centos4 network: Bringing up interface eth0: succeeded
Oct 17 11:59:57 centos4 kernel: ACPI: Power Button (FF) [PWRF]
Oct 17 11:59:57 centos4 kernel: EXT3 FS on hda5, internal journal
Oct 17 11:59:57 centos4 kernel: device-mapper: dm-linear: Device
lookup failed
Oct 17 11:59:57 centos4 kernel: device-mapper: error adding target to
table
Oct 17 11:59:57 centos4 kernel: cdrom: open failed.
Oct 17 11:59:57 centos4 kernel: device-mapper: dm-linear: Device
lookup failed
Oct 17 11:59:57 centos4 kernel: device-mapper: error adding target to
table
Oct 17 11:59:57 centos4 kernel: kjournald starting. Commit interval
5 seconds
Oct 17 11:59:57 centos4 kernel: EXT3 FS on hda1, internal journal
Oct 17 11:59:57 centos4 kernel: EXT3-fs: mounted filesystem with
ordered data mode.
Oct 17 11:59:57 centos4 kernel: SELinux: initialized (dev hda1, type
ext3), uses xattr
Oct 17 11:59:57 centos4 kernel: SELinux: initialized (dev tmpfs, type
tmpfs), uses transition SIDs
Oct 17 11:59:57 centos4 kernel: kjournald starting. Commit interval
5 seconds
Oct 17 11:59:57 centos4 kernel: EXT3 FS on hda3, internal journal
Oct 17 11:59:57 centos4 kernel: EXT3-fs: mounted filesystem with
ordered data mode.
Oct 17 11:59:57 centos4 kernel: SELinux: initialized (dev hda3, type
ext3), uses xattr
Oct 17 11:59:57 centos4 kernel: Adding 2048276k swap on /dev/hda2.
Priority:-1 extents:1
Oct 17 11:59:57 centos4 smartd[2745]: Device: /dev/hde, is SMART
capable. Adding to "monitor" list.
Oct 17 11:59:57 centos4 kernel: SELinux: initialized (dev
binfmt_misc, type binfmt_misc), uses genfs_contexts
Oct 17 11:59:57 centos4 smartd[2745]: Device: /dev/hdg, opened
Oct 17 11:59:57 centos4 kernel: parport0: PC-style at 0x378 (0x778)
[PCSPP,TRISTATE]
Oct 17 11:59:57 centos4 kernel: parport0: irq 7 detected
Oct 17 11:59:57 centos4 kernel: ip_tables: (C) 2000-2002 Netfilter
core team
Oct 17 11:59:57 centos4 smartd[2745]: Device: /dev/hdg, found in
smartd database.
Oct 17 11:59:57 centos4 kernel: ip_conntrack version 2.1 (4095
buckets, 32760 max) - 356 bytes per conntrack
Oct 17 11:59:57 centos4 kernel: eth0: link up, 100Mbps, full-duplex,
lpa 0x45E1
Oct 17 11:59:57 centos4 kernel: SELinux: initialized (dev rpc_pipefs,
type rpc_pipefs), uses genfs_contexts
Oct 17 11:59:57 centos4 kernel: i2c /dev entries driver
Oct 17 11:59:58 centos4 smartd[2745]: Device: /dev/hdg, is SMART
capable. Adding to "monitor" list.
Oct 17 11:59:58 centos4 smartd[2745]: Monitoring 3 ATA and 0 SCSI
devices
Oct 17 11:59:59 centos4 smartd[2747]: smartd has fork()ed into
background mode. New PID=2747.
Oct 17 11:59:59 centos4 smartd: smartd startup succeeded
Oct 17 11:59:59 centos4 acpid: acpid startup succeeded
Oct 17 12:00:00 centos4 rc: Starting hpoj: succeeded
Oct 17 12:00:01 centos4 kernel: parport0: PC-style at 0x378 (0x778)
[PCSPP,TRISTATE]
Oct 17 12:00:01 centos4 kernel: parport0: irq 7 detected
Oct 17 12:00:01 centos4 kernel: lp0: using parport0 (polling).
Oct 17 12:00:01 centos4 kernel: lp0: console ready
Oct 17 12:00:03 centos4 cups: cupsd startup succeeded
Oct 17 12:00:03 centos4 sshd[2830]: Server listening on :: port 22.
Oct 17 12:00:03 centos4 sshd[2830]: error: Bind to port 22 on 0.0.0.0
failed: Address already in use.
Oct 17 12:00:03 centos4 sshd: succeeded
Oct 17 12:00:03 centos4 xinetd: xinetd startup succeeded
Oct 17 12:00:04 centos4 xinetd[2845]: xinetd Version 2.3.13 started
with libwrap loadavg options compiled in.
Oct 17 12:00:04 centos4 xinetd[2845]: Started working: 1 available
service
Oct 17 12:00:04 centos4 sendmail[2863]: sql_select option missing
Oct 17 12:00:04 centos4 sendmail[2863]: auxpropfunc error no
mechanism available
Oct 17 12:00:04 centos4 sendmail: sendmail startup succeeded
Oct 17 12:00:04 centos4 sendmail: sm-client startup succeeded
Oct 17 12:00:04 centos4 gpm[2883]: *** info [startup.c(95)]:
Oct 17 12:00:04 centos4 gpm[2883]: Started gpm successfully. Entered
daemon mode.
Oct 17 12:00:04 centos4 gpm[2883]: *** info [mice.c(1766)]:
Oct 17 12:00:04 centos4 gpm[2883]: imps2: Auto-detected intellimouse
PS/2
Oct 17 12:00:05 centos4 gpm: gpm startup succeeded
Oct 17 12:00:05 centos4 iiim: htt startup succeeded
Oct 17 12:00:06 centos4 htt_server[2914]: started.
Oct 17 12:00:07 centos4 canna: succeeded
Oct 17 12:00:07 centos4 crond: crond startup succeeded
Oct 17 12:00:08 centos4 xfs: xfs startup succeeded
Oct 17 12:00:08 centos4 anacron: anacron startup succeeded
Oct 17 12:00:09 centos4 xfs[2979]: ignoring font path element /usr/
X11R6/lib/X11/fonts/Speedo (unreadable)
Oct 17 12:00:09 centos4 atd: atd startup succeeded
Oct 17 12:00:09 centos4 readahead: Starting background readahead:
Oct 17 12:00:09 centos4 rc: Starting readahead: succeeded
Oct 17 12:00:10 centos4 messagebus: messagebus startup succeeded
Oct 17 12:00:10 centos4 cups-config-daemon: cups-config-daemon
startup succeeded
Oct 17 12:00:11 centos4 haldaemon: haldaemon startup succeeded
Oct 17 12:00:14 centos4 fstab-sync[3479]: removed all generated mount
points
Oct 17 12:00:14 centos4 fstab-sync[3520]: added mount point /media/
usbdisk for /dev/sda1
Oct 17 12:00:18 centos4 fstab-sync[3675]: added mount point /media/
cdrecorder for /dev/hdc
Oct 17 12:00:18 centos4 kernel: ACPI: PCI interrupt 0000:01:00.0[A] -
> GSI 11 (level, low) -> IRQ 11
Oct 17 12:00:18 centos4 kernel: [drm] Initialized mga 3.1.0 20021029
on minor 0:
Oct 17 12:00:18 centos4 kernel: agpgart: Found an AGP 2.0 compliant
device at 0000:00:00.0.
Oct 17 12:00:18 centos4 kernel: agpgart: Putting AGP V2 device at
0000:00:00.0 into 1x mode
Oct 17 12:00:18 centos4 kernel: agpgart: Putting AGP V2 device at
0000:01:00.0 into 1x mode
Oct 17 12:00:19 centos4 fstab-sync[3812]: added mount point /media/
floppy for /dev/fd0
Oct 17 12:01:01 centos4 crond(pam_unix)[3833]: session opened for
user root by (uid=0)
Oct 17 12:01:01 centos4 crond(pam_unix)[3833]: session closed for
user root
Oct 17 12:04:37 centos4 gdm(pam_unix)[3511]: session opened for user
root by (uid=0)
Oct 17 12:04:38 centos4 gconfd (root-3910): starting (version 2.8.1),
pid 3910 user 'root'
Oct 17 12:04:38 centos4 gconfd (root-3910): Resolved address
"xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only
configuration source at position 0
Oct 17 12:04:38 centos4 gconfd (root-3910): Resolved address
"xml:readwrite:/root/.gconf" to a writable configuration source at
position 1
Oct 17 12:04:38 centos4 gconfd (root-3910): Resolved address
"xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only
configuration source at position 2
More information about the CentOS
mailing list