[CentOS] EXT3 Problem.

Gerald gwichman at gmail.com
Fri Sep 22 22:16:49 UTC 2006


> Gerald wrote:
> > I'm looking for some recommendations on where to go with a problem i'm
> > running across. A filesystem under load put itself in readonly mode
> > and the following can be found under dmesg..  any suggestions on root
> > cause? hardware wise it's got a pair of PATA drives connected to a
> > 3ware card in RAID10 configuration.
>
> a pair? or two pairs?

I take that back. 6 x 120GB drives (fairly old drives + system), 3ware
7000 card, RAID10 config which currently shows as being OK though
might've had some kind of "hiccup" when these errors occured that i
don't have historical logs for due to 3dm not being loaded. kernel is
2.6.9-42.0.2.plug.c4smp.

> > EXT3-fs error (device dm-4): ext3_add_entry: bad entry in directory
> > #14370410: rec_len % 4 != 0 - offset=0, inode=1309281588,
> > rec_len=16761, name_len=78
> > Aborting journal on device dm-4.
> > ext3_abort called.
> > EXT3-fs error (device dm-4): ext3_journal_start_sb: Detected aborted
> > journal
> > Remounting filesystem read-only
> > EXT3-fs error (device dm-4) in start_transaction: Journal has aborted
> > EXT3-fs error (device dm-4) in ext3_create: IO failure
> > __journal_remove_journal_head: freeing b_committed_data
> > __journal_remove_journal_head: freeing b_committed_data
>
> data=journal?

nope.. data=ordered (default)



More information about the CentOS mailing list