magawake at gmail.com
Sat Aug 30 14:48:12 UTC 2008
I suppose I can take a look at smartd to get log files and have them
forward to syslog-ng, unless smartd has an email feature :-)
What does your smartd config look like for HP P400/800 controller? I
would be curious to look at that.
On Sat, Aug 30, 2008 at 10:15 AM, Mogens Kjaer <mk at crc.dk> wrote:
> Mag Gam wrote:
>> Thankyou Anne.
>> I just installed this and its seems to work. I am behind a RAID
>> controller so hopefully anyone with cciss drivers can shed some light.
>> I am able to see my logical devices but I have 6 drives per logical
>> device. I would like to see all 12 drive status if possible.
> The RAID controller watches the SMART status of the drives for you.
> You should watch the status of the RAID controller. It should give
> a warning if a drive is about to fail or has failed.
> I use array-info to get the status:
> # /usr/local/bin/array-info -d /dev/cciss/c0d0
> Compaq Smart Array 5312
> Firmware revision : 2.58
> Rom revision : 2.58
> 1 logical drive configured.
> Logical drive 0 :
> Fault tolerance : RAID 5
> Size : 957.10 GiB (2007181360 blocks of 512 bytes)
> Status : Logical drive is ok
> Mogens Kjaer, Carlsberg A/S, Computer Department
> Gamle Carlsberg Vej 10, DK-2500 Valby, Denmark
> Phone: +45 33 27 53 25, Fax: +45 33 27 47 08
> Email: mk at crc.dk Homepage: http://www.crc.dk
> CentOS mailing list
> CentOS at centos.org
More information about the CentOS