Um bom dia a todos!
Obrigado a todos que me retornaram segue a solução para quem precisar:
"Renomeando o nome da interface de rede no CentOS 7:
Então sua interface de rede se chama algo como “ens….”? Quer o bom e velho eth0 ?
[root@centos7-1 ~]# ifconfig ens192: flags=4163 mtu 1500 inet 10.x.x.152 netmask 255.255.252.0 broadcast 10.134.39.255 inet6 fe80::250:56ff:fe93:5f8e prefixlen 64 scopeid 0x20 ether 00:50:56:93:5f:8e txqueuelen 1000 (Ethernet) RX packets 2084 bytes 136963 (133.7 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 176 bytes 22010 (21.4 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Altere o arquivo /etc/default/grub, adicione no final da linha GRUB_CMDLINE_LINUX: net.ifnames=0 biosdevname=0
/etc/default/grub
GRUB_CMDLINE_LINUX="rd.lvm.lv=wm/swap vconsole.font=latarcyrheb-sun16 rd.lvm.lv=wm/root crashkernel=auto vconsole.keymap=us rhgb quiet net.ifnames=0 biosdevname=0
Reconfigure o grub: grub2-mkconfig -o /boot/grub2/grub.cfg
Renomeie o arquivo de configuração: mv /etc/sysconfig/network-scripts/ifcfg-ens192 /etc/sysconfig/network-scripts/ifcfg-eth0
Altere o nome da interface de rede dentro do arquivo de configuração:
# cat /etc/sysconfig/network-scripts/ifcfg-eth0 HWADDR=00:11:56:93:5F:8E TYPE=Ethernet BOOTPROTO=none DEFROUTE=yes PEERDNS=yes PEERROUTES=yes IPADDR=10.xx.xx.152 NETMASK=255.255.252.0 GATEWAY=10.x.x.1 IPV4_FAILURE_FATAL=no IPV6INIT=no IPV6_AUTOCONF=yes IPV6_DEFROUTE=yes IPV6_PEERDNS=yes IPV6_PEERROUTES=yes IPV6_FAILURE_FATAL=no NAME=eth0 UUID=84f57a6a-9e0d-4444-a97c-e2b360345b78 ONBOOT=yes NM_CONTROLLED=no
Desabilite o NetworkManager (veja o NM_CONTROLLED, já desativa na interface também) service NetworkManager stop chkconfig NetworkManager off
reboot "
*Todo o crédito para Flávio Torres *
*link -> http://flaviotorres.com.br/wp/centosredhat-7-rename-network-interface-name/#... http://flaviotorres.com.br/wp/centosredhat-7-rename-network-interface-name/#comment-133 * Valeu Fábio
~ *| Fábio de Sousa * .ºvº. *| Téc. Inf.* /(_)\ | *Seja livre, use LINUX* .^.^. | *Socialmente justo, economicamente viável e tecnologicamente sustentável*
Em 24 de julho de 2014 23:02, Rodrigo K. Ferreira rkferreira@gmail.com escreveu:
Boa Fabio,
O esquema de nomes mudou: https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/7/htm...
Voce pode mudar para o antigo apenas:
Remova o pacote biosdevname Adicione biosdevname=0 net.ifnames=0 no grub na chamada do kernel. On Jul 24, 2014 10:50 PM, "Walison Morales" walison@live.jp wrote:
Boa Noite Fábio,
Encontrei o seguinte artigo explicando de forma bem detalhada.
http://www.linuxnewmedia.com.br/images/uploads/pdf_aberto/LM_104_48_49_02_re... Att, Morales
2014-07-24 15:34 GMT-04:00 Fábio de Sousa fabiocs@gmail.com:
Um Salve a todos!
Sobre o CentOS 7:
Alguém sabe me dizer porque a eth0 agora é enp2s0?
Como faço para renomear enp2s0 para eth0?
Abraço,
~ *| Fábio de Sousa
.ºvº. *| Téc. Inf.* /(_)\ | *Seja livre, use LINUX* .^.^. | *Socialmente justo, economicamente viável e tecnologicamente sustentável*
CentOS-pt-br mailing list CentOS-pt-br@centos.org http://lists.centos.org/mailman/listinfo/centos-pt-br
CentOS-pt-br mailing list CentOS-pt-br@centos.org http://lists.centos.org/mailman/listinfo/centos-pt-br
CentOS-pt-br mailing list CentOS-pt-br@centos.org http://lists.centos.org/mailman/listinfo/centos-pt-br