Prezados amigos instalei um cento Os 5.4 porem to tendo o seguinte problema
este servidor esta plugado em outro servidor e to usando gb ethernet porem a placa quando plugo o cabo fica gb ethernet depois fica em 100 normal ..
ja testei a placa intel on board do servidor acontece isso e uma dlink gb ethernet tb ta acontecendo a mesma coisa
esta são as mensagem que aparecem
e1000e: eth0 NIC Link is Down e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: None eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Down e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: RX eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Down e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: RX eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Down e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: None eth0: 10/100 speed: disabling TSO eth0: TSO is Disabled eth0: TSO is Enabled e1000e: eth0 NIC Link is Down skge eth1: Link is up at 1000 Mbps, full duplex, flow control none ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready eth1: no IPv6 routers present skge eth1: disabling interface skge eth1: enabling interface skge eth1: Link is up at 100 Mbps, full duplex, flow control none eth1: no IPv6 routers present [root@database data]# uname -a Linux database 2.6.18-164.11.1.el5 #1 SMP Wed Jan 20 07:32:21 EST 2010 x86_64 x86_64 x86_64 GNU/Linux
alguem poderia me dizer o que pode ta acontecendo
att diogo