Discuss June 2007

discuss@lists.centos.org

280 participants
339 discussions

Troubles with CentOS5 and 3ware RAID controller
by Luc de Louw 27 Jun '07

27 Jun '07

Folks, Since approx. a half year I have run two servers with CentOS4, all was running very stable. Then I upgraded to CentOS5 (fresh install). The servers are running quite unstable since the upgrade. The system is freezing after short uptime. I suspect the driver for the 3ware controller, because I got such error messages: 3w-xxxx: scsi0: Character ioctl (0x1f) timed out, resetting card. 3w-xxxx: scsi0: Character ioctl (0x1f) timed out, resetting card. 3w-xxxx: scsi0: Character ioctl (0x1f) timed out, resetting card. (lots of repeats of this messages) sd 0:0:0:0: rejecting I/O to offline device sd 0:0:0:0: rejecting I/O to offline device sd 0:0:0:0: rejecting I/O to offline device EXT3-fs error (device sda6): ext3_find_entry: reading directory #2 offset 0 sd 0:0:0:0: rejecting I/O to offline device sd 0:0:0:0: rejecting I/O to offline device sd 0:0:0:0: rejecting I/O to offline device After some time (few hours) the systems are completely freezing, no display of errors on the console or logs Here some relevant data of my system: 00:0a.0 RAID bus controller: 3ware Inc 7xxx/8xxx-series PATA/SATA-RAID (rev 01) Subsystem: 3ware Inc 7xxx/8xxx-series PATA/SATA-RAID Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2250ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 185 Region 0: I/O ports at e100 [size=16] Region 1: Memory at fa824000 (32-bit, non-prefetchable) [size=16] Region 2: Memory at fa000000 (32-bit, non-prefetchable) [size=8M] [virtual] Expansion ROM at 80060000 [disabled] [size=64K] Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel: 2.6.18-8.1.6.el5 It cannot be a 3ware hardware error, because the controller was exchanged with the same results afterwards. Any hints are very welcome. Thanks, Luc

2 1

ext3 and acls
by Dave 27 Jun '07

27 Jun '07

Hello, I've got a centos5 box with raided ext3 partitions mp* devices. I'm wondering if ext3 supports acls out of the box or if there's something i have to do to enable them? Thanks. Dave.

4 3

vncviewer package wit hcentos 5
by Jerry Geis 27 Jun '07

27 Jun '07

I have xkeybindings running just fine on centos 5. I have vncviewer running in full screen mode showing another PC. When vncviewer is running is running it seems to override my xkeybindings. Is there a way to tell vncviewer to not bind to any keys?? The only keys I am binding is on the Keypad 3,4,6, 9 and Enter. Nothing that vncviewer uses anyway. How can I still have my xkeybindings active with vncviewer running? Thanks, Jerry

1 0

Wireless networking in CentOS 4.4
by Andrew Allen 27 Jun '07

27 Jun '07

Trying to set up wireless networking with CentOS 4.4 on a (new Dell) laptop and have looked at http://www.ces.clemson.edu/linux/fc2- ipw2200.shtml and http://www.centos.org/modules/newbb/viewtopic.php? topic_id=2532&forum=30 regarding use of ipw2200, which is included in the kernel. The problem is that it doesn't appear to be actually installed/loaded because the Intel Corporation PRO/Wireless 2200BG driver doesn't appear in the drop- down list under Devices > New > Wireless Connection in system-config- network. Also /sbin/lsmod | grep ipw doesn't produce anything - so I'm pretty baffled! Any suggestions please? Andy

2 1

Getting JPilot working
by Robert Moskowitz 26 Jun '07

26 Jun '07

I am trying to get JPilot working. I have configed gnome-pilot-applet, but it is not talking to the USB connected Treo650. My Treo has my name as the user, so from the applet, I see also a userid (my UID on this system it seems). I try to put that on the Treo and nothing happens. I have enabled the Backup Conduit. I am using /dev/pilot, which shows up when my Treo is connected via its USB syncing cable. In JPilot in settings, I specify /dev/pilot I go install user and install the same user as in the pilot-applet. I click on sync and press the sync button on the cable and I watch all the files get backed up to my /MyPilot directory (used from pilot-applet). But NOTHING shows up in J-Pilot. Everything is still there on the Treo.... Any thoughts? /var/log/messages shows the following in conjunction with a Sync: Jun 26 10:55:24 nc4010 kernel: usb 1-2: new full speed USB device using ohci_hcd and address 11 Jun 26 10:55:24 nc4010 kernel: usb 1-2: configuration #1 chosen from 1 choice Jun 26 10:55:24 nc4010 kernel: visor 1-2:1.0: Handspring Visor / Palm OS convert er detected Jun 26 10:55:24 nc4010 kernel: usb 1-2: Handspring Visor / Palm OS converter now attached to ttyUSB0 Jun 26 10:55:24 nc4010 kernel: usb 1-2: Handspring Visor / Palm OS converter now attached to ttyUSB1 Jun 26 10:55:47 nc4010 kernel: usb 1-2: USB disconnect, address 11 Jun 26 10:55:47 nc4010 kernel: visor 1-2:1.0: device disconnected Sync runs nicely, the files on the Treo are backed up to the director specified in

1 1

CentOS5: Eclipse error!
by Antonio da Silva Martins Junior 26 Jun '07

26 Jun '07

Hello, We had a CentOS5 server with Eclipse on it, one of our programmers tried to update the Eclipse install (within eclipse) and after a problem on the update it stop working. I tried removing the Eclipse RPMs and eclipse directories, and reinstalling it with yum. Now we had this error, on $HOME/workspace/.metadata/.log: !SESSION 2007-06-25 09:44:00.093 ----------------------------------------------- eclipse.buildId=M20060921-0945 java.version=1.6.0_01 java.vendor=Sun Microsystems Inc. BootLoader constants: OS=linux, ARCH=x86_64, WS=gtk, NL=pt_BR Command-line arguments: -os linux -ws gtk -arch x86_64 !ENTRY org.eclipse.update.configurator 2007-06-25 09:44:01.535 !MESSAGE Could not install bundle plugins/org.eclipse.pde.build/ Bundle "org.e clipse.pde.build" version "3.2.1.r321_v20060823" has already been installed from : update(a)plugins/org.eclipse.pde.build_3.2.1.r321_v20060823/ !ENTRY org.eclipse.core.runtime 2007-06-25 09:44:02.208 !MESSAGE Product org.eclipse.sdk.ide could not be found. The error go on... Somebody had an idea on what are this "already installed" update, on this way I can wipe all the install and put it fresh from the repository! Thanks in advance, Antonio. -- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Antonio S. Martins Jr. - Support Analist | "Only The Shadow Knows | | Universidade Estadual de Maringá - Brasil| what evil lurks in the | | NPD - Núcleo de Processamento de Dados | Heart of Men!" | | E-Mail: asmartins(a)uem.br / shadow(a)uem.br | !!! Linux User: 52392 !!! | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ -- Esta mensagem foi verificada pelo sistema de antiv�rus e acredita-se estar livre de perigo.

1 0

CentOS-announce Digest, Vol 28, Issue 17
by centos-announce-request＠centos.org 26 Jun '07

26 Jun '07

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2007:0509 Important CentOS 3 i386 evolution - security update (Tru Huynh) 2. CESA-2007:0509 Important CentOS 3 x86_64 evolution - security update (Tru Huynh) ---------------------------------------------------------------------- Message: 1 Date: Mon, 25 Jun 2007 16:45:34 +0200 From: Tru Huynh <tru(a)centos.org> Subject: [CentOS-announce] CESA-2007:0509 Important CentOS 3 i386 evolution - security update To: centos-announce(a)centos.org Message-ID: <20070625144534.GA23811(a)sillage.bis.pasteur.fr> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory CESA-2007:0509 evolution security update for CentOS 3 i386: https://rhn.redhat.com/errata/RHSA-2007-0509.html The following updated file has been uploaded and is currently syncing to the mirrors: i386: updates/i386/RPMS/evolution-1.4.5-21.el3.i386.rpm updates/i386/RPMS/evolution-devel-1.4.5-21.el3.i386.rpm source: updates/SRPMS/evolution-1.4.5-21.el3.src.rpm You may update your CentOS-3 i386 installations by running the command: yum update evolution\* Tru -- Tru Huynh (CentOS-3 i386/x86_64 Package Maintenance) http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xBEFA581B

1 0

2007 New Zealand Open Source Awards
by Johnny Hughes 26 Jun '07

26 Jun '07

Anyone using CentOS to do open source things in New Zealand? If so ... nominate yourself here for the 2007 New Zealand Open Source Awards. The best I can tell ... New Zealanders are the organizations / people they want for nominees. The CentOS Project has no (to my knowledge) developers in New Zealand, but if some of the organizations there are using the product, maybe they can nominate themselves and CentOS for awards in some of the categories. http://www.nzosa.org.nz/ Thanks, Johnny Hughes

1 0

bind on centos 5
by Indunil Jayasooriya 26 Jun '07

26 Jun '07

Hi, I am trying to setup bind on centOS 5. But there are no files coming by default. But I found some files @ /usr/share/doc/bind-9.3.3/sample Now, could you pls tell me what r the files I need to set it up? Is there are a good doc on How to setup dns on CentOS 5 ? -- Thank you Indunil Jayasooriya

5 5

rpmrebuild or rpmbuild question
by centos 26 Jun '07

26 Jun '07

Hello I have compiled php on a server, but want to upgrade and recompile it with new features. is rpmbuild or rpmrebuild capable of compiling or adding these new features ? or I should download the source and run ./configure again ? what about yum ? it was great if yum or rpmbuild could save the current config and just add the new extensions. Thanks

3 5

← Newer
1
...
5
6
7
8
9
10
11
...
34
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss June 2007