Discuss April 2008

discuss@lists.centos.org

252 participants
275 discussions

lvm VolGroup00 problem after disk upgrade
by David Hláčik 09 Apr '08

09 Apr '08

Hi to all, i am facing a really strange problem ,and i am not able to find a solution by myself and it is really critical for me to solve it asap :( I have replaced old sata disk with new one on centos , i did a whole cp -a copy from single mode do new disk. What i have done? 1) using fdisk created sdb1 (Linux) and sdb2 (Linux LVM) 1) created volume group boss on new disk at sda2 2) created group volumes root, home, swap 3) formated /dev/mapper/boss-root with ext3 4) fromated /dev/mapper/boss-home with ext3 5) created mkswap on /dev/mapper/boss-swap 6) formated /dev/sdb1 with ext3 (will be boot) mounted all under /new and did cp -a from current disk to /new location (without /proc and /tmp) then created /new/proc and /new/tmp directory after that i turned off computer and removed old disk (sda) booted using centos cd with linux rescue everything got mounted under /mnt/sysimage chrooted to /mnt/sysimage then i edited /etc/fstab with current values : /dev/mapper/boss-root for roor /dev/mapper/boss-home for home /dev/mapper/boss-swap for swap edited /etc/grub.conf with root= /dev/mapper/boss-root did grub-install /dev/sda and now the problem after kernel load i will get info that GroupVol00 (which was lvm group on old disk does not exist) info about boss group fonded and then i will get an error that /dev/root ???? does not exist and then that /proc does not exist and then kernel panic Where is the problem? I did this whole process so many times without error and know i am stuck do not know where. I checked lvm.conf double, checked if /etc/fstab /etc/grub.conf configured OK checked using lvm syntax for lvm ... Thanks in advance!

2 2

openssh version 5
by Alain Terriault, Mr. 09 Apr '08

09 Apr '08

Greetings, It just strike me that they are no available version of OpenSSH version 5 or any available versions with the ChrootDirectory option. Any reason why ? Thanks,

3 2

Summary Server Shut Down!!!!
by Harry Sukumar 09 Apr '08

09 Apr '08

Summary Many Thanks to Bill Campbell, Nicolas Sahlqvist and Barry Brimer The problem turned out to be one of disk had software errors (message attached), I used ubuntu live cd to fix this issue Cheers Harry ________________________________________________________________________ ____________ From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Harry Sukumar Sent: Wednesday, 9 April 2008 11:48 AM To: CentOS mailing list Subject: [CentOS] Server Shut Down!!!! Good Day All, I have a serious problem on one of my servers running CentOS 5!!! The problem started this way, I wanted to store some data under /home and I got an error message saying it is in the read only mode So I rebooted the machine, Then I see this serious error messages at boot time (I am unable to boot) Here is the Error Message!!! *** Error occurred during the file system check. *** Dropping you to shell; the system will reboot *** when you leave the shell Give root password for maintenance (or type control D to continue): Bash: dircolors: command not found Bash: /usr/bin/id: No such file or directory Bash: [:=: unary operator expected (Repair filesystem)1 # When I press control D the machine reboots itself and comes back to the same prompt asking for root password for maintenance Your help in this matter is highly appreciated Many Thanks Harry

2 1

Server Shut Down!!!!
by Harry Sukumar 09 Apr '08

09 Apr '08

Good Day All, I have a serious problem on one of my servers running CentOS 5!!! The problem started this way, I wanted to store some data under /home and I got an error message saying it is in the read only mode So I rebooted the machine, Then I see this serious error messages at boot time (I am unable to boot) Here is the Error Message!!! *** Error occurred during the file system check. *** Dropping you to shell; the system will reboot *** when you leave the shell Give root password for maintenance (or type control D to continue): Bash: dircolors: command not found Bash: /usr/bin/id: No such file or directory Bash: [:=: unary operator expected (Repair filesystem)1 # When I press control D the machine reboots itself and comes back to the same prompt asking for root password for maintenance Your help in this matter is highly appreciated Many Thanks Harry

4 3

Plone
by centos＠911networks.com 09 Apr '08

09 Apr '08

Any good guide to install Plone? I have googled around and could not find a good one [meaning clear instructions that I can easily follow]. From a repository would be best . --- Thanks

3 2

list of epel packages
by David Hláčik 08 Apr '08

08 Apr '08

Hi! I know it has been solved many times, but how will i get a list of all installed packages from EPEL repository? I know for rpmforge it is rpm -qa package=*rf* . Thanks! David

5 5

rsync question
by Anne Wilson 08 Apr '08

08 Apr '08

I run several backup scripts by cron, one of which backs up my mail. I do not want it to back up the Trash folder, but it appears to be doing so. I conclude that my script is faulty somewhere, and would be grateful for advice. The command is rsync -auvz --delete-after --exclude-from=/home/anne/rsync_skiplist_mail.txt /home/anne/Maildir/ /Data3/anne/Maildir/ where rsync_skiplist_mail.txt says *~ .[a-z]* .[A-Z]* Maildir/.INBOX.Bugs/ Maildir/.Trash/ Comments, please? Anne

3 5

Re: MS Exchange Replacement
by Jun Salen 08 Apr '08

08 Apr '08

Joseph L. Casale wrote: > What is the closest open source mail server I can replace exchange > with that provides the nearest equivalent in user experience? > > Thanks! > jlc I use Zimbra OS Edition with more than 300 users, Ajax and HTML capable and very easy to setup. Looks professional in terms of interface. Good community too. The only problem is that it was bought by Yahoo which is planning to buy by M$, but since OS version was GPL, then I assume that the project will continue even after acquired by M$. Maybe. junji aisalen.wordpress.com Linux Registered User #253162 CentOS User Send instant messages to your online friends http://uk.messenger.yahoo.com

11 13

hw question: asus dsbf-de sata ports?
by Gordon McLellan 08 Apr '08

08 Apr '08

Hello List, I'm hoping someone else out there has an Asus DSBF-DE server board, and can tell me if anything special needs to be done to get ports 5 and 6 of the onboard SATA to work under Centos 5.1 x64. I have drives on 1 through 4 that are detected and working properly, however, a drive on 5 is not detected, from what i can tell, the kernel doesn't even see phy's for ports 5 and 6. On an older box, unused sata ports were still identified, but showed there was no drive attached. Even hot-plugging a drive into ports 5 or 6 generates no events in dmesg or the system log... it's like those ports are turned off or something. I've checked the bios, and nothing jumped out at me as an obvious switch that says "turn on ports 5 and 6". This board is using Intel's 5000P chipset, and linux appears to have chosen the generic intel_piix driver to access the onboard sata. I have a second sata hba on the system, a supermicro 8 port card, which loads up later using the sata_mv driver, It has no problems right now, and is currently Any ideas? Thanks, Gordon I'm running the latest CentOS Plus XEN kernel: # uname -a Linux xenmaster.dimension-x.local 2.6.18-53.1.14.el5.centos.plusxen #1 SMP Fri Mar 7 09:25:20 EST 2008 x86_64 x86_64 x86_64 GNU/Linux Here's a snippet of dmesg: SCSI subsystem initialized libata version 2.21 loaded. ata_piix 0000:00:1f.2: version 2.11 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] PCI: Enabling device 0000:00:1f.2 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x00000000000118c8 ctl 0x00000000000118ae bmdma 0x00000000000118b0 irq 19 ata2: SATA max UDMA/133 cmd 0x00000000000118c0 ctl 0x00000000000118aa bmdma 0x00000000000118b8 irq 19 ata1.00: ATA-6: ST380817AS, 3.42, max UDMA/133 ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.01: ATA-8: ST3750330AS, AD14, max UDMA/133 ata1.01: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 ata1.01: configured for UDMA/133 usb 1-1: device not accepting address 2, error -71 ata2.00: ATA-8: ST3750330AS, AD14, max UDMA/133 ata2.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata2.01: ATA-8: ST3750330AS, AD14, max UDMA/133 ata2.01: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata2.00: configured for UDMA/133 ata2.01: configured for UDMA/133 Vendor: ATA Model: ST380817AS Rev: 3.42 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sd 0:0:0:0: Attached scsi disk sda Vendor: ATA Model: ST3750330AS Rev: AD14 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdb: 1465149168 512-byte hdwr sectors (750156 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 1465149168 512-byte hdwr sectors (750156 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back sdb: sdb1 sd 0:0:1:0: Attached scsi disk sdb Vendor: ATA Model: ST3750330AS Rev: AD14 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdc: 1465149168 512-byte hdwr sectors (750156 MB) sdc: Write Protect is off sdc: Mode Sense: 00 3a 00 00 SCSI device sdc: drive cache: write back SCSI device sdc: 1465149168 512-byte hdwr sectors (750156 MB) sdc: Write Protect is off sdc: Mode Sense: 00 3a 00 00 SCSI device sdc: drive cache: write back sdc: sdc1 sd 1:0:0:0: Attached scsi disk sdc Vendor: ATA Model: ST3750330AS Rev: AD14 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdd: 1465149168 512-byte hdwr sectors (750156 MB) sdd: Write Protect is off sdd: Mode Sense: 00 3a 00 00 SCSI device sdd: drive cache: write back SCSI device sdd: 1465149168 512-byte hdwr sectors (750156 MB) sdd: Write Protect is off sdd: Mode Sense: 00 3a 00 00 SCSI device sdd: drive cache: write back sdd: sdd1 sd 1:0:1:0: Attached scsi disk sdd Here's my lspci and lspci -v: # lspci 00:00.0 Host bridge: Intel Corporation 5000P Chipset Memory Controller Hub (rev b1) 00:02.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 2-3 (rev b1) 00:03.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 (rev b1) 00:04.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 4-5 (rev b1) 00:05.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 5 (rev b1) 00:06.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 6-7 (rev b1) 00:07.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 7 (rev b1) 00:08.0 System peripheral: Intel Corporation 5000 Series Chipset DMA Engine (rev b1) 00:10.0 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev b1) 00:10.1 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev b1) 00:10.2 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev b1) 00:11.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved Registers (rev b1) 00:13.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved Registers (rev b1) 00:15.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers (rev b1) 00:16.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers (rev b1) 00:1c.0 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 (rev 09) 00:1d.0 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 (rev 09) 00:1d.1 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 (rev 09) 00:1d.2 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 (rev 09) 00:1d.3 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #4 (rev 09) 00:1d.7 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller (rev 09) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d9) 00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller (rev 09) 00:1f.1 IDE interface: Intel Corporation 631xESB/632xESB IDE Controller (rev 09) 00:1f.2 IDE interface: Intel Corporation 631xESB/632xESB/3100 Chipset SATA IDE Controller (rev 09) 00:1f.3 SMBus: Intel Corporation 631xESB/632xESB/3100 Chipset SMBus Controller (rev 09) 01:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port (rev 01) 01:00.3 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge (rev 01) 02:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 (rev 01) 02:02.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E3 (rev 01) 04:00.0 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) (rev 01) 04:00.1 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) (rev 01) 05:01.0 SCSI storage controller: Marvell Technology Group Ltd. MV88SX6081 8-port SATA II PCI-X Controller (rev 09) 09:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06) 09:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06) 0c:02.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) # lspci -v 00:00.0 Host bridge: Intel Corporation 5000P Chipset Memory Controller Hub (rev b1) Subsystem: ASUSTeK Computer Inc. Unknown device 81db Flags: bus master, fast devsel, latency 0 Capabilities: [50] Power Management version 2 Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable- Capabilities: [6c] Express Root Port (Slot-) IRQ 0 00:02.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 2-3 (rev b1) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=05, sec-latency=0 I/O behind bridge: 00002000-00003fff Memory behind bridge: c8100000-c87fffff Capabilities: [50] Power Management version 2 Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable- Capabilities: [6c] Express Root Port (Slot-) IRQ 0 00:03.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 (rev b1) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 Capabilities: [50] Power Management version 2 Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable- Capabilities: [6c] Express Root Port (Slot-) IRQ 0 00:04.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 4-5 (rev b1) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 Capabilities: [50] Power Management version 2 Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable- Capabilities: [6c] Express Root Port (Slot+) IRQ 0 00:05.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 5 (rev b1) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 Capabilities: [50] Power Management version 2 Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable- Capabilities: [6c] Express Root Port (Slot+) IRQ 0 00:06.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 6-7 (rev b1) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=09, subordinate=09, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: c8800000-c88fffff Prefetchable memory behind bridge: 00000000c2000000-00000000c2000000 Capabilities: [50] Power Management version 2 Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable- Capabilities: [6c] Express Root Port (Slot+) IRQ 0 00:07.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 7 (rev b1) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0 Capabilities: [50] Power Management version 2 Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable- Capabilities: [6c] Express Root Port (Slot+) IRQ 0 00:08.0 System peripheral: Intel Corporation 5000 Series Chipset DMA Engine (rev b1) Subsystem: ASUSTeK Computer Inc. Unknown device 81db Flags: bus master, fast devsel, latency 0 Memory at fe700000 (64-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Capabilities: [6c] Express Unknown type IRQ 0 00:10.0 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev b1) Subsystem: ASUSTeK Computer Inc. Unknown device 81db Flags: fast devsel 00:10.1 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev b1) Subsystem: ASUSTeK Computer Inc. Unknown device 81db Flags: fast devsel 00:10.2 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev b1) Subsystem: ASUSTeK Computer Inc. Unknown device 81db Flags: fast devsel 00:11.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved Registers (rev b1) Subsystem: ASUSTeK Computer Inc. Unknown device 81db Flags: fast devsel 00:13.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved Registers (rev b1) Subsystem: ASUSTeK Computer Inc. Unknown device 81db Flags: fast devsel 00:15.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers (rev b1) Subsystem: ASUSTeK Computer Inc. Unknown device 81db Flags: fast devsel 00:16.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers (rev b1) Subsystem: ASUSTeK Computer Inc. Unknown device 81db Flags: fast devsel 00:1c.0 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 (rev 09) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0 Capabilities: [40] Express Root Port (Slot+) IRQ 0 Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 00:1d.0 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 (rev 09) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device 81dc Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at 1800 [size=32] 00:1d.1 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 (rev 09) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device 81dc Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at 1820 [size=32] 00:1d.2 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 (rev 09) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device 81dc Flags: bus master, medium devsel, latency 0, IRQ 17 I/O ports at 1840 [size=32] 00:1d.3 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #4 (rev 09) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device 81dc Flags: bus master, medium devsel, latency 0, IRQ 16 I/O ports at 1860 [size=32] 00:1d.7 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller (rev 09) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device 81dc Flags: bus master, medium devsel, latency 0, IRQ 18 Memory at c8000000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d9) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=32 I/O behind bridge: 00005000-00005fff Memory behind bridge: c8900000-c89fffff Prefetchable memory behind bridge: 00000000d0000000-00000000d7f00000 Capabilities: [50] #0d [0000] 00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller (rev 09) Subsystem: ASUSTeK Computer Inc. Unknown device 81dc Flags: bus master, medium devsel, latency 0 00:1f.1 IDE interface: Intel Corporation 631xESB/632xESB IDE Controller (rev 09) (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. Unknown device 81dc Flags: bus master, medium devsel, latency 0, IRQ 17 I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at 1880 [size=16] 00:1f.2 IDE interface: Intel Corporation 631xESB/632xESB/3100 Chipset SATA IDE Controller (rev 09) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Unknown device 81dc Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19 I/O ports at 18c8 [size=8] I/O ports at 18ac [size=4] I/O ports at 18c0 [size=8] I/O ports at 18a8 [size=4] I/O ports at 18b0 [size=16] Memory at c8000400 (32-bit, non-prefetchable) [size=1K] Capabilities: [70] Power Management version 2 00:1f.3 SMBus: Intel Corporation 631xESB/632xESB/3100 Chipset SMBus Controller (rev 09) Subsystem: ASUSTeK Computer Inc. Unknown device 81dc Flags: medium devsel, IRQ 19 I/O ports at 1100 [size=32] 01:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port (rev 01) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=01, secondary=02, subordinate=04, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: c8200000-c82fffff Capabilities: [44] Express Upstream Port IRQ 0 Capabilities: [70] Power Management version 2 Capabilities: [80] #0d [0000] 01:00.3 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge (rev 01) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=01, secondary=05, subordinate=05, sec-latency=64 I/O behind bridge: 00003000-00003fff Memory behind bridge: c8300000-c87fffff Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0 Capabilities: [6c] Power Management version 2 Capabilities: [80] #0d [0000] Capabilities: [d8] PCI-X bridge device 02:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 (rev 01) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=02, secondary=03, subordinate=03, sec-latency=0 Capabilities: [44] Express Downstream Port (Slot-) IRQ 0 Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [70] Power Management version 2 Capabilities: [80] #0d [0000] 02:02.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E3 (rev 01) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=02, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: c8200000-c82fffff Capabilities: [44] Express Downstream Port (Slot-) IRQ 0 Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [70] Power Management version 2 Capabilities: [80] #0d [0000] 04:00.0 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) (rev 01) Subsystem: ASUSTeK Computer Inc. Unknown device 8217 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at c8200000 (32-bit, non-prefetchable) [size=128K] I/O ports at 2000 [size=32] Capabilities: [c8] Power Management version 2 Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [e0] Express Endpoint IRQ 0 04:00.1 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) (rev 01) Subsystem: ASUSTeK Computer Inc. Unknown device 8217 Flags: bus master, fast devsel, latency 0, IRQ 19 Memory at c8220000 (32-bit, non-prefetchable) [size=128K] I/O ports at 2020 [size=32] Capabilities: [c8] Power Management version 2 Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [e0] Express Endpoint IRQ 0 05:01.0 SCSI storage controller: Marvell Technology Group Ltd. MV88SX6081 8-port SATA II PCI-X Controller (rev 09) Subsystem: Marvell Technology Group Ltd. Unknown device 11ab Flags: bus master, fast Back2Back, 66MHz, medium devsel, latency 32, IRQ 20 Memory at c8300000 (64-bit, non-prefetchable) [size=1M] I/O ports at 3000 [size=256] Capabilities: [40] Power Management version 2 Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [60] PCI-X non-bridge device 09:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06) Subsystem: Intel Corporation PRO/1000 PT Dual Port Server Adapter Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at c8820000 (32-bit, non-prefetchable) [size=128K] Memory at c8800000 (32-bit, non-prefetchable) [size=128K] I/O ports at 4000 [size=32] [virtual] Expansion ROM at c2000000 [disabled] [size=128K] Capabilities: [c8] Power Management version 2 Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [e0] Express Endpoint IRQ 0 09:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06) Subsystem: Intel Corporation PRO/1000 PT Dual Port Server Adapter Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at c8860000 (32-bit, non-prefetchable) [size=128K] Memory at c8840000 (32-bit, non-prefetchable) [size=128K] I/O ports at 4020 [size=32] [virtual] Expansion ROM at c2020000 [disabled] [size=128K] Capabilities: [c8] Power Management version 2 Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [e0] Express Endpoint IRQ 0 0c:02.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) (prog-if 00 [VGA]) Subsystem: ASUSTeK Computer Inc. Unknown device 81de Flags: bus master, stepping, fast Back2Back, medium devsel, latency 66, IRQ 5 Memory at d0000000 (32-bit, prefetchable) [size=128M] I/O ports at 5000 [size=256] Memory at c8900000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at c8920000 [disabled] [size=128K] Capabilities: [50] Power Management version 2

1 0

Cisco 2801 Tunnel1 Mrtg graph
by umair shakil 08 Apr '08

08 Apr '08

Dear All Salam, Please go through the cfg file: Target[IP_Tu1]: Tunnel1:community@IP: SetEnv[IP_Tu1]: MRTG_INT_IP="IP" MRTG_INT_DESCR="Tunnel1" MaxBytes[IP_Tu1]: 1125 Title[IP_Tu1]: Tunnel1 -- yourdomain.com PageTop[IP_Tu1]: <H1>Tunnel1 -- yourdomain.com</H1> <TABLE> <TR><TD>System:</TD> <TD>yourdomain.com in </TD></TR> <TR><TD>Maintainer:</TD> <TD></TD></TR> <TR><TD>Description:</TD><TD>Tunnel1 </TD></TR> <TR><TD>ifType:</TD> <TD>Encapsulation Interface (131)</TD></TR> <TR><TD>ifName:</TD> <TD>Tu1</TD></TR> <TR><TD>Max Speed:</TD> <TD>1125.0 Bytes/s</TD></TR> <TR><TD>Ip:</TD> <TD>yourdomain.com</TD></TR> </TABLE> Here, the office traffic is on Tunnel1 interface, when i run mrtg the graph is displaying but traffic is not shown. please help in this regard. Regards, Umair Shakil ETD

1 0

← Newer
1
...
19
20
21
22
23
24
25
...
28
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss April 2008