Discuss September 2009

discuss@lists.centos.org

300 participants
294 discussions

Centos 5.3 - kickstart configuration
by Karl Kobata 28 Sep '09

28 Sep '09

Over the last couple of weeks, additional software was installed using the package manager. I would like to get a custom kickstart file created for our system. For this, I would like to get complete list of software installed so they may be add to the kickstart file package selection. Can anyone tell me if this can be done? If it can, please give me instructions? Finally, where on the installation cd's would I place this kickstart file ? Thank you.

6 6

Software Raids Questions (I have only ever used hardware?)
by James Bensley 28 Sep '09

28 Sep '09

Hey List; I have no experience with software RAIDs; at work we only use hardware RAIDs and I'm looking to implement, probably a RAID 5 set up at home for a media server however I have a few questions; I have three 1TB drives in various places; one is inside a USB caddy, one is inside my PC and in is inside my existing media centre. Is it possible to add these three drives to another one to give me 4TBs of space in a RAID setup without having to wipe the drives as in my experience which is only with hardware RAIDs, I have normally formatted all the disks before creating the RAID? The thing is, if that is the case I will need to transfer 3TB of stuff somewhere (I have an idea where, if this were the case), make the RAID then transfer it all back but I really don't want to do that as I'm sure you can imagine. Also, if the above where possible; in the future could I then keep adding more drives and expanding the RAID? Note: Obviously I know for this to be a RAID 5 I would need extra drives but the RAID level is undecided, but provisionally I think it will be RAID 5. On a side note, I cobbled together my new media centre running Ubuntu but I might move it back to CentOS, it was originally CentOS and that is my favoured distro, but I would rather not now it is running Ubuntu happily I'm just wondering, is this all achievable in Ubuntu? Granted people on the CentOS mailing list might not know that, but if anyone knows that it is all achievable in CentOS then I would move back? Thanks for reading. Regards, James ;) -- Ted Turner - "Sports is like a war without the killing." - http://www.brainyquote.com/quotes/authors/t/ted_turner.html

7 27

fully open source ECM? yup.
by Robert P. J. Day 28 Sep '09

28 Sep '09

it's all about the open source, baby. http://candyandaspirin.blogspot.com/2009/09/next-adventure-in-ecm-begins.ht… DISCLAIMER: the lady in question is a good friend of mine. but don't let that scare you off. :-) rday -- ======================================================================== Robert P. J. Day Waterloo, Ontario, CANADA Linux Consulting, Training and Annoying Kernel Pedantry. Web page: http://crashcourse.ca Twitter: http://twitter.com/rpjday ========================================================================

1 0

Re: [CentOS] CentOS for non-tech user
by Anne Wilson 28 Sep '09

28 Sep '09

On Thursday 24 September 2009 12:38:12 Sorin Srbu wrote: > >-----Original Message----- > >From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On > > Behalf > > >Of Anne Wilson > >Sent: Thursday, September 24, 2009 1:27 PM > >To: CentOS mailing list > >Subject: Re: [CentOS] CentOS for non-tech user > > > >Yea, I know, "I get to keep the pieces" :-) I have both of those on my > > server > > >box, which is where I'm testing what's available for her, but kipi-plugins > >isn't found be yum list or yum search. Strange when libkipi is there. > > Have you checked eg pbone.net for some suitable rpm's? Assuming all > dependencies are met from before, you could install them manually. > Yes, I checked pbone - but only for centos. > I don't know much about Fedora any longer, I gave it up somewhere around at > FC5 or 6, but there might be some repo(s) for this one that you might use. > At least worth checking up I think. > I think if the worst comes to the worst it would be possible to install a FC6 package. Pbone says there is a package for FC6, and also offers an rpm from sourceforge. That may be a possibility too. Anne -- New to KDE4? - get help from http://userbase.kde.org Just found a cool new feature? Add it to UserBase

7 8

Re: [CentOS] libqt4-qt3support Dependency Hell
by Tom 28 Sep '09

28 Sep '09

What are you using to install the package? Rpm? Yum? ------Original Message------ From: Eric Clark Sender: centos-bounces(a)centos.org To: centos ReplyTo: CentOS mailing list Sent: Sep 27, 2009 3:16 PM Subject: [CentOS] libqt4-qt3support Dependency Hell Been trying to figure out what in the screwball world is going on with this. Tried to install libqt4 and keep getting more dependencies and more dependencies on top of that. Just trying to install KepassX for i386 CentOS 5 Any help? _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

4 11

IP aliases of CentOS Guests not accessible running 2.6.18-164.el5xen
by Devraj Mukherjee 28 Sep '09

28 Sep '09

Hi all, First of all I am posting this on two lists for a reason, because the issue being reported by me could be because of a change delivered by a Kernel update or due to Xen. I have recently managed to update all Xen Guest domains running CentOS 5.3 to the latest bunch of updates + Kernel. My Xen host also runs the same CentOS 5.3 updated to all recent packages. The Guest images in concern had IP aliases assigned to them. Everything worked until I ran the updates and restarted. Since I have restarted the aliased IP addresses are no longer accessible from the outside world, they can still be accessed from all machines (guest virtual machines) in the subnet (ping, services like http). I have removed all firewall rules to test if that would have effected it without any change (any the fact that I can access them within the subnet proves its not the firewall). Is there anything special I have to do to enable aliasing? May be this is a Xen issue? I am suspecting the Xen host, but not sure how to go about proving this. Any information would be greatly appreciated. My Guests do run fail2ban (delivered via atrpms) and iptables (allowing only HTTP, HTTPS and SSH) connections. PS for obvious reasons I am not posting IP addresses and routes etc first up, I can make that information available if required. -- "The secret impresses no-one, the trick you use it for is everything" - Alfred Borden (The Prestiege)

1 0

Using yum with CentOS-2 mirrors
by Matt Arnilo S. Baluyos (Mailing Lists) 28 Sep '09

28 Sep '09

Hi all, I was having yum errors while updating our CentOS-2 box. Further reading lead me to a readme file on the mirrors (http://mirror.centos.org/centos-2/readme.txt) and it gave me the new URL to use for CentOS-2 mirrors. I have edited /etc/yum.conf with the new URLs but I'm still having issues with yum giving me "ValueError: unpack list of wrong size" errors. Has anyone been able to update their yum configuration to be still able to use yum? How were you able to configure it? I understand that CentOS-2 has now reached its EOL but we have a legacy application that won't run on newer distros. -- Stand before it and there is no beginning. Follow it and there is no end. Stay with the ancient Tao, Move with the present.

3 6

External Backup Systems?
by M. Hamzah Khan 28 Sep '09

28 Sep '09

Hey everyone, My home server just had a disk failure a few weeks ago and like a lot of people I haven't ever really made backups on a regular basis. So I was looking into backup solutions which will save me from this situation again. Now I have Bacula setup, and backing up my files onto my home server. Although this works great, I have one issue: The disk in my server was the one that actually failed, and so, even with RAID1, could fail again. So to get around this I wanted to backup to external media aswell. I don't really think external hard drives are that great considering they are just as reliable as internal hard drives which would be pointless as RAID1 should be reliable enough in that case. Backing up to DVDs are quite unreliable too, a simple scratch could render the backup useless. Also it would require quite a lot of DVDs to backup my data (at least 500GB!). The only other option I could think of is to use tapes, but this option can be quite pricy for a home user. So I was wondering what you guys use for external backups for a home system containing at least 500GB worth of important data? Regards Hamzah -- M. Hamzah Khan RedHat Certified Engineer Number: 804005539516829 Email: hamzah(a)hamzahkhan.com URL: http://www.hamzahkhan.com

5 9

rsync not getting all files?
by Scott Ehrlich 28 Sep '09

28 Sep '09

I ran rsync on a combination of Ubuntu and CentOS systems and it doesn't seem to grab all files, such as .cshrc or .bashrc (and they do exist). This makes me wonder what other files rsync may be missing, and how do I tell rsync to grab those missing files? Thanks.

2 1

Dependency Hell!
by Eric Clark 28 Sep '09

28 Sep '09

I am in dependency HELL Trying to install keypassx for CentOS. All of my other systems have it and have to use it for work. Great little component however Had to reformat my linux box and start over. (next time make backup!_ very nice)

3 2

← Newer
1
...
4
5
6
7
8
9
10
...
30
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss September 2009