Discuss July 2010

discuss@lists.centos.org

242 participants
193 discussions

Re: [CentOS] Smallest install?
by m.roth＠5-cent.us 12 Jul '10

12 Jul '10

Brunner, Brian T. wrote: > >> > I have a 500Mb ATA Flash drive in my machine. If I deselect >> > everything at install time (CentOS 5.0 - just for testing) it still >> > requires 524Mb. Is there any way of doing an even smaller install? >> >> Run a pre 5 series install and it is straightforward to hold size down >> >> There are lower thresholds one cannot go below and still stay >> with current updates. My article on 'tiny centos' provides >> 'slimming scripts' to trim away coherent sets to taste while >> still satisfying dependencies >> http://www.owlriver.com/tips/tiny-centos/ > > Thank you! Since I also want to make a tiny flash-based centos, I'll > look into this! Timny, flash-based? I recently bought an 8GB USB key for a netbook distro instal, and we have two here at work for some of our rackmounts that have no DVD reader. > >> Just because one is familiar with >> hammers does not mean one should be shaving cats with one > > That depends, in part, on how much one dislikes cats. > > Shaving pissed-off tomcats is best done with welding gloves and apron, > and a hammer. Um, that may not work, he says, thinking of his friend in the US northwet with a full-sized cougar.* ObDiscllosure: cat lover; likes dogs ok, otherwise I'd suggest grooming your dog with a hammer. mark

1 0

Correct permissions for uploading files
by Todd Cary 12 Jul '10

12 Jul '10

I am trying to implement PHP upload functionality for an application. When I attempt an upload in my test environment, I get the following error: An error has occurred: receiving directory insufficient permission... The upload form is reloading The destination file being moved by move_uploaded_file is /home/httpd//test/upload/uploads/1278898550-_DSC1159.jpg The initial file name is suppose to be /tmp/phpR1lmmc I am not sure what to set for Owner and Group for the "uploads" directory nor the permissions (it is now set to 775). Many thanks for some guidance for this matter... Todd -- Ariste Software Petaluma, CA 94952 http://www.aristesoftware.com

4 4

Smallest install?
by Stephen Harris 12 Jul '10

12 Jul '10

I have a 500Mb ATA Flash drive in my machine. If I deselect everything at install time (CentOS 5.0 - just for testing) it still requires 524Mb. Is there any way of doing an even smaller install? -- rgds Stephen

8 10

Simple solution for small network in a school ?
by Niki Kovacs 12 Jul '10

12 Jul '10

Hi, I have to install a small network in a school in a nearby village. The network will be Linux-only, one server and fifteen desktops. Here's the idea. 1) Authentication should be managed centrally on the server. 2) User home directories should also be on the server. 3) Users should all have disk quotas, something like 1 GB per user. 4) Some shared directories should be read/write for a defined group of users (teachers) and read-only for others. So far, I've only dealt with local authentication. I have a little practice in basic setups of Samba and NFS and managed to get these to work OK. On the other hand, I've never worked with NIS, LDAP or the likes. My question is more general, and I don't want to go into technical details. According to the KISS principle, which solution would you recommend (or explicitly *not* recommend)? A mix of LDAP and Samba? Or NIS and NFS? And what's this thing called Directory Server, which vaguely sounds like it's the right way to go? Any suggestions? Cheers from the hot South of France, Niki

10 10

Networking just stopped working
by Christopher Chan 12 Jul '10

12 Jul '10

Hi all, I have a box with a quad port Netxen NIC running Centos 5. All four interfaces are slaves of bond0 and bond0 is used by two vlan interfaces. All was working just fine until just recently when everything just stopped working. ethtool reports all the individual interfaces are just fine. The switch is not complaining either. But I cannot ping anywhere not can others 'see' the box. Any ideas? I have turned off iptables, rebooted the switches but still the thing won't work. Christopher

7 23

Redundant LAN routing possible?
by Emmanuel Noobadmin 12 Jul '10

12 Jul '10

I've been reading that it's possible to set up a system with multiple NIC to provide redundant internet connectivity such that it will switch to a secondary connection if the primary ISP fails. Is it possible in a similar way to setup redundant LAN routing? I read that it is possible to aggregate/bond multiple NIC to stackable switches that support link aggregation and redundancy. But if only simple switches are available, is something like this possible? e.g. System A eth0 -> lan switch/router 1 eth1 -> lan switch/router 2 System B eth0 -> lan switch 1 eth1 -> lan switch 2 Then somehow specify that, if lan switch 1 fails, the two systems will switch to using switch 2 so that in case of a switch failure, the network continues to remain operational.

7 10

lm_sensors and Shuttle
by listmail 11 Jul '10

11 Jul '10

Hi All, I'm trying to get lm_sensors to work on a Shuttle with an AMD K10. The version of lm_sensors in the main CentOS repo is 2.10.7, which is two years old now. Support for the K10 was added about a year ago. So, does anyone know if there are binaries available for more recent versions of lm_sensors? Also, if anyone has knowledge of the sensors layout for recent Shuttle AMD motherboards, that would be very helpful. The sensors-detect script from 2.10.7 doesn't detect anything useful... Thanks, --Bill

5 6

wlan
by mattias 10 Jul '10

10 Jul '10

How to search after wlans using command prompt I have no gui

3 4

OpenOffice.org 3.1 installation was corrupted-installed again, nothing in Applications/Office menu
by Lanny Marcus 10 Jul '10

10 Jul '10

I had a corrupted installation of OpenOffice.org 3.1. When I used "yum remove openoffice.org-core" the response was "package openoffice.org-core available but not installed", but then, when I used "yum install openoffice.org-core there was a long list of Transaction Check Errors. I then removed openoffice.org3.1-redhat-menus-noarch which was in the errors. Here's the first of those errors: Transaction Check Error: file /usr/bin/soffice from install of openoffice.org-core-3.1.1-19.5.el5_5.1.i386 conflicts with file from package openoffice.org3.1-redhat-menus-3.1-9393.noarch The transaction completed OK, after I removed openoffice.org3.1-redhat-menus-noarch, but now, there is nothing in Applications/Office menu for OpenOffice.org :-) Question: How do I get the different entries for OpenOffice.org to appear in that menu again so I can launch the application? (If I need to install the latest version of openoffice.org3.1-redhat-menus-noarch what command do I use to get the correct version?) CentOS 5.5 (32 bit): [lanny@dell2400 ~]$ uname -a Linux dell2400.homelan 2.6.18-194.3.1.el5 #1 SMP Thu May 13 13:09:10 EDT 2010 i686 i686 i386 GNU/Linuxlate TIA! Lanny Panties, Swimwear, Women's Bras, Mens Underwear http://www.bras-panties.com/

4 11

vmware
by mattias 10 Jul '10

10 Jul '10

How can vmware run more stable on centos and not on ubuntu? I meen Usb works fine on centos but not on ubuntu

5 8

← Newer
1
...
11
12
13
14
15
16
17
...
20
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss July 2010