Discuss March 2011

discuss@lists.centos.org

286 participants
250 discussions

httpd cannot serve web page on port 2812 (for Monit)
by Rogelio 19 Mar '11

19 Mar '11

Might there be anything CentOS related on why I cannot access the Monit GUI system on http://box-running-monit.com:2812 ? I am using a very basic /etc/monit.conf config, but I cannot get it serve the web page on my box The service start and stops fine (e.g. "/etc/init.d/monit start"), and I have it set to listen to port 2812 in the "/etc/monit.conf file" (so far, kept the default) e.g. in "/etc/monit.d/monitrc" file set daemon 60 set logfile syslog facility log_daemon set mailserver localhost set mail-format { from: monit(a)server1.example.com } set alert me(a)mydomain.com set httpd port 2812 check process sshd with pidfile /var/run/sshd.pid start program "/etc/init.d/sshd start" stop program "/etc/init.d/sshd stop" if failed port 22 protocol ssh then restart if 5 restarts within 5 cycles then timeout (I also enabled the 2812 port using CentOS's "system-config-securitylevel" command, which added the right IPtables entries, which I see okay on "iptables -L") -- Also on LinkedIn? Feel free to connect if you too are an open networker: scubacuda(a)gmail.com

2 4

PHP - Security Updates
by Tom Brown 19 Mar '11

19 Mar '11

Hi I am wondering if this has made it into any updates? http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2010-4645 thanks

2 1

Safe/sane tempfile creation?
by Dr. Ed Morbius 19 Mar '11

19 Mar '11

I'm used to Debian-based distros which have a tempfile(1) utility for safely and sanely creating temporary files. There isn't a comperable utility for RHEL/CentOS systems. I've been exercising Google-fu looking for a good robust tempfile generation idiom, but haven't turned one up yet. Hence this appeal to the lazyweb. -- Dr. Ed Morbius, Chief Scientist / | Robot Wrangler / Staff Psychologist | When you seek unlimited power Krell Power Systems Unlimited | Go to Krell!

2 2

Cannot %include in CentOS 5.5 kickstart
by whitivery 19 Mar '11

19 Mar '11

I've previously used includes in CentOS 4.4 and they worked fine. But in CentOS 5.5, trying to specify a driver disk via an include does not work. If I instead specify it directly, it loads fine. When it fails (because it can't see the disk drive - needs the driver disk to see the hard disk), in Console 2 I can see that /tmp/drvdisk exists and has the line I wrote to it. I see nothing that looks wrong in any log or kickstart file/fragment in /tmp. Any ideas? Here's my complete kickstart to show/test this: # Minimal Kickstart test for CentOS 5.5 to show %include problem url --url=http://10.0.4.157/cblr/links/CentOS5.5-i386 text lang en_US.UTF-8 keyboard us timezone --utc America/New_York install bootloader --location=mbr clearpart --all --initlabel network --device eth0 --bootproto dhcp firewall --disabled selinux --disabled rootpw --iscrypted \$1\$x6z.qvwE\$7Zg9g1rCEgvOBoA7Oo/HF1 zerombr authconfig --useshadow --enablemd5 part /boot --fstype ext3 --size 100 --asprimary part / --fstype ext3 --size 1 --grow --asprimary part /var --fstype ext3 --size 10000 part swap --recommended # This does not work %include /tmp/drvdisk # This works #driverdisk --source=nfs:10.0.4.157:/srv/cobbler/RHEL5.5_x86_402_409_410_DD.img %packages @base @core %pre --erroronfail echo "driverdisk --source=nfs:10.0.4.157:/srv/cobbler/RHEL5.5_x86_402_409_410_DD.img" > /tmp/drvdisk # (end of kickstart file)

3 6

rpm split
by Janez Kosmrlj 18 Mar '11

18 Mar '11

Hi, I have a custom rpm for our application. The problem is that it grew old and fat. It's about 30 MB. So i would like to split it into two parts. One big part that almost never changes and one smaller part that is changed more frequently. But i don't know how to write the spec file so a simple yum update will install both packages and it won't create any problems. Any suggestions?

2 1

modprobe :: not finding existing .ko
by Adrian Sevcenco 18 Mar '11

18 Mar '11

Hi! I try to load an module that it is found in curent /lib/modules/`uname -r` tree ... root@sevcenco: ~ # ls -l /lib/modules/`uname -r`/kernel/drivers/crypto/padlock-* -rwxr--r-- 1 root root 14296 Mar 16 19:37 /lib/modules/2.6.38-0.el5.elrepo/kernel/drivers/crypto/padlock-aes.ko -rwxr--r-- 1 root root 10808 Mar 16 19:37 /lib/modules/2.6.38-0.el5.elrepo/kernel/drivers/crypto/padlock-sha.ko but if i try : root@sevcenco: ~ # modprobe -v padlock-aes.ko FATAL: Module padlock_aes.ko not found. notice the change from - to _ Any idea about this? or more abstract: have anyone succeed to use padlock (via) hardware with openssl (or other software) in centos? Thanks, Adrian

8 8

creating a htpasswd file for certain urls
by Agnello George 18 Mar '11

18 Mar '11

H All I am in a kind of fix , i got a website ( beta.somesite.com ) .. that need to be password protected , however there are two URLs that should be allowed to all with out password access. Ona cent os box 5.5 i am running apache . the entire site needs passwd protection except for the Below Urls . http://beta.somesite.com/wp-content/uploads/2011/03/large_1990782-e12992296… http://beta.somesite.com/?cat=592&feed=rss2 Your advice will be of great help -- Regards Agnello D'souza

5 5

Replace NIS by Active Directory
by MOKRANI Rachid 18 Mar '11

18 Mar '11

Hi, I'm looking a wiki or share experience for replace NIS authentication by an existing Active directory Server (W2003). The problem is on the management of id and gid. How to move 1000 actual NIS users to AD ? How to keep the same id and gid for this 1000 users ? What's happen with nfs linux server and acess with gid and/id ? Use the same user/password for linux and Windows clients authentification? We test a solution who work very well. It's Centrify comercial software http://www.centrify.com/directcontrol/overview.asp . But we are looking a freeware solution. (kerberos ? openldap ? pam ? ...) Does someone has already successfully replace NIS by Ad authentification with freeware solution ? Regards. __________________________ Notre adresse de messagerie évolue pour plus de simplicité vers : prenom.nom(a)ifpen.fr. La racine @ifpenergiesnouvelles.fr reste néanmoins active. Our e-mail address is changing to firstname.surname(a)ifpen.fr. Nevertheless, messages sent to the domain @ifpenergiesnouvelles.fr will still be delivered. Ce message (et toutes ses pièces jointes éventuelles) est confidentiel et établi à l'intention exclusive de ses destinataires. Toute utilisation de ce message non conforme à sa destination, toute diffusion ou toute publication, totale ou partielle, est interdite, sauf autorisation expresse. IFP Energies nouvelles décline toute responsabilité au titre de ce message. This message and any attachments (the message) are confidential and intended solely for the addressees. Any unauthorised use or dissemination is prohibited. IFP Energies nouvelles should not be liable for this message. Visitez notre site Web / Visit our web site : www.ifpenergiesnouvelles.fr / www.ifpenergiesnouvelles.com __________________________

6 10

Add repo for xfig package
by hersh parikh 18 Mar '11

18 Mar '11

Hi All We want to install packages like xfig and transfig on centos 5.5. We found rpms available but them but it seems there are lot of dependencies for these packages. So we would like to setup yum repo for this. Can anyone suggest trusted baseurl for yum repo? Regards Hersh

2 1

IPV6 - request for info
by Rajagopal Swaminathan 18 Mar '11

18 Mar '11

Greetings, I am trying to wrap my head around on this topic. Was wondering : Just as there is some scope for mapping ipv4 directly into IPV6 space, Is there a MAC ID or some kind of WWID has also been taken into consideration? Regards, Rajagopal

2 1

← Newer
1
...
8
9
10
11
12
13
14
...
25
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss March 2011