Discuss May 2012

discuss@lists.centos.org

193 participants
202 discussions

pvcreate limitations on big disks?
by Alan McKay 24 May '12

24 May '12

OK folks, I'm back at it again. Instead of taking my J4400 ( 24 x 1T disks) and making a big RAID60 out of it which Linux cannot make a filesystem on, I'm created 4 x RAID6 which each are 3.64T I then do : sfdisk /dev/sd{b,c,d,e} <<EOF ,,8e EOF to make a big LVM partition on each one. But then when I do : pvcreate /dev/sd{b,c,d,e}1 and then pvdisplay It shows each one as only half its actual size. But if I take the last one and wipe the partition table and just do pvcreate on the entire disk, it works pvcreate /dev/sde And then if I take the results from that and use the size to force a size on another PV I get it right too pvcreate /dev/sdd1 --setphysicalvolumesize=3.64T I'd use the entire disk expect that this seems dangerous to me because you do "sfdisk -l" and the disk appears to have no partition table which might entice someone to thing it is unused. And I'm not sure whether it is safe to use setphysicalvolumesize. Anyone know for sure? What are my alternatives? "/dev/sdb1" is a new physical volume of "1.64 TB" --- NEW Physical volume --- PV Name /dev/sdb1 VG Name PV Size 1.64 TB Allocatable NO PE Size (KByte) 0 Total PE 0 Free PE 0 Allocated PE 0 PV UUID 7bzxpQ-Md1o-Z73g-YzLX-xxj7-nszh-LucEFW "/dev/sdc1" is a new physical volume of "1.64 TB" --- NEW Physical volume --- PV Name /dev/sdc1 VG Name PV Size 1.64 TB Allocatable NO PE Size (KByte) 0 Total PE 0 Free PE 0 Allocated PE 0 PV UUID tlpJ6A-LPs1-NFbl-h1AZ-5aBX-yOuO-phcwWD "/dev/sdd1" is a new physical volume of "3.64 TB" --- NEW Physical volume --- PV Name /dev/sdd1 VG Name PV Size 3.64 TB Allocatable NO PE Size (KByte) 0 Total PE 0 Free PE 0 Allocated PE 0 PV UUID ifwmQQ-AOvK-Ke6L-2gEy-aJgJ-bb8d-DaJJDD "/dev/sde" is a new physical volume of "3.64 TB" --- NEW Physical volume --- PV Name /dev/sde VG Name PV Size 3.64 TB Allocatable NO PE Size (KByte) 0 Total PE 0 Free PE 0 Allocated PE 0 PV UUID VPptAS-CFul-Awe9-TI7E-W9jq-zVdx-1mJjDR [root@solexa1 ~]# -- “Don't eat anything you've ever seen advertised on TV” - Michael Pollan, author of "In Defense of Food"

3 2

Centos 5.8 has no "Virtualization" install option
by Dennis Jacobfeuerborn 24 May '12

24 May '12

Hi, when I try to install Centos 5.8 on a Dell r410 then I don't get a "Virtualization" option during the package selection of the installer. Centos 5.7 does show that option fine. Is this a known issue? Regards, Dennis

2 1

centos modprobe ipv6 fatal ipv6.ko Invalid module format
by Jesus del Valle 24 May '12

24 May '12

Hi. My provider rebooted the server today or the server rebooted itself because of some problem, still don't know. Anyway: In /var/log/messages now I get zillions of modprobe: FATAL: Could not read '/lib/modules/2.6.32-220.17.1.el6.x86_64/kernel/net/ipv6/ipv6.ko': Invalid module format I am not able to find any solution to this. ??? Thanks for your time, Jesus

2 2

SMB shares and LDAP
by aurfalien 24 May '12

24 May '12

Hi, I have a scenario were I only have OpenLDAP running for authing my Linux and Windows client. Windows is using the pGina LDAP client to talk to my OpenLDAP server, no problems, working like a charm. However I need to setup a simple Samba file server-only. None of my Unix boxes have a compete /etc/passwd file as every one auths against OpenLDAP. Is there some kind of passwd backend option in my smb.conf that allows it to query my OpenLDAP server? Thanks in advance, - aurf

3 3

CentOS-announce Digest, Vol 87, Issue 13
by centos-announce-request＠centos.org 23 May '12

23 May '12

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2012:0687 CentOS 6 tcsh Update (Johnny Hughes) 2. CEEA-2012:0689 CentOS 5 tzdata Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 23 May 2012 10:38:13 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0687 CentOS 6 tcsh Update To: centos-announce(a)centos.org Message-ID: <20120523103813.GA13752(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0687 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0687.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 7fd5609316d0075b50bbf1b2bd28f84bcf1a3aa093eda16779bab0bc31ff75c9 tcsh-6.17-19.el6_2.i686.rpm x86_64: 5c1e42ef8c09a69a5ace2816efc5f012958619574697c1ee627f1241732644ad tcsh-6.17-19.el6_2.x86_64.rpm Source: 93f506843d03a70269cb447708b34c1d99671cd6d87b5590dc6f652f7d7411e4 tcsh-6.17-19.el6_2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Wed, 23 May 2012 13:47:40 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEEA-2012:0689 CentOS 5 tzdata Update To: centos-announce(a)centos.org Message-ID: <20120523134740.GA23254(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2012:0689 Upstream details at : https://rhn.redhat.com/errata/RHEA-2012-0689.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 51e6aa9e590d99c5e701b16df17b28a69e20f913d183abd16e170382d6ed25ef tzdata-2012c-1.el5.i386.rpm 7bd6b84dc1bcd0c8024f7b787fe6caac501fb0483a730bbac6ec5a95d9e9d2c2 tzdata-java-2012c-1.el5.i386.rpm x86_64: 8c987cb46e810c34d586c35a2d33e14fdf907fccd41d40434374bba427beb37d tzdata-2012c-1.el5.x86_64.rpm 9c1e847aa79a26e892ed7afd11bf474b1e8b9c32c827a369deb73b7d6417e7a2 tzdata-java-2012c-1.el5.x86_64.rpm Source: 127684a8135f7754c3d13108b8da9791beb77614c00fe153acd40a5ba970d605 tzdata-2012c-1.el5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 87, Issue 13 ***********************************************

1 0

Reset adapter
by sebastian 23 May '12

23 May '12

Hi, one of our rented root-server has a problem with the network-adapter.The network is interrupted from time to time and i can not longer connect to our server. We can only reboote (remote) the server and restart the network. I think it was an network-driver-problem from an "Intel Corporation 82574L Gigabit Network" --- e1000e But now i have install a new kernel-driver and i have the same problem again. Here an extract of the logs: <---//first log with old driver//--- May 22 16:52:40 mega2 kernel: e1000e: Intel(R) PRO/1000 Network Driver - 1.4.4-k May 22 16:52:40 mega2 kernel: e1000e: Copyright(c) 1999 - 2011 Intel Corporation. May 22 16:52:40 mega2 kernel: e1000e 0000:04:00.0: Disabling ASPM L0s May 22 16:52:40 mega2 kernel: e1000e 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 May 22 16:52:40 mega2 kernel: scsi 0:1:0:0: Direct-Access TOSHIBA MBF245LRC 6104 PQ: 1 ANSI: 5 May 22 16:52:40 mega2 kernel: scsi 0:1:1:0: Direct-Access TOSHIBA MBF245LRC 6104 PQ: 1 ANSI: 5 May 22 16:52:40 mega2 kernel: usb 1-1.2: new full speed USB device using ehci_hcd and address 3 May 22 16:52:40 mega2 kernel: scsi 0:3:0:0: Enclosure ADAPTEC Virtual SGPIO PQ: 0 ANSI: 5 May 22 16:52:40 mega2 kernel: Refined TSC clocksource calibration: 3092.973 MHz. May 22 16:52:40 mega2 kernel: Switching to clocksource tsc May 22 16:52:40 mega2 kernel: e1000e 0000:04:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:75:ad:38 May 22 16:52:40 mega2 kernel: e1000e 0000:04:00.0: eth0: Intel(R) PRO/1000 Network Connection May 22 16:52:40 mega2 kernel: e1000e 0000:04:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF May 22 16:52:40 mega2 kernel: e1000e 0000:05:00.0: Disabling ASPM L0s May 22 16:52:40 mega2 kernel: e1000e 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 May 22 16:52:40 mega2 kernel: usb 1-1.2: New USB device found, idVendor=0557, idProduct=2221 May 22 16:52:40 mega2 kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 May 22 16:52:40 mega2 kernel: usb 1-1.2: Product: Hermon USB hidmouse Device May 22 16:52:40 mega2 kernel: usb 1-1.2: Manufacturer: Winbond Electronics Corp May 22 16:52:40 mega2 kernel: usb 1-1.2: configuration #1 chosen from 1 choice May 22 16:52:40 mega2 kernel: input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4 May 22 16:52:40 mega2 kernel: generic-usb 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.2/input0 May 22 16:52:40 mega2 kernel: input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input5 May 22 16:52:40 mega2 kernel: generic-usb 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.2/input1 May 22 16:52:40 mega2 kernel: input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6 May 22 16:52:40 mega2 kernel: e1000e 0000:05:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:75:ad:39 May 22 16:52:40 mega2 kernel: e1000e 0000:05:00.0: eth1: Intel(R) PRO/1000 Network Connection May 22 16:52:40 mega2 kernel: e1000e 0000:05:00.0: eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF May 22 16:52:40 mega2 kernel: scsi: waiting for bus probes to complete ... May 22 16:52:40 mega2 kernel: sd 0:0:0:0: [sda] 878686208 512-byte logical blocks: (449 GB/418 GiB) May 22 16:52:40 mega2 kernel: sd 0:0:0:0: [sda] Write Protect is off May 22 16:52:40 mega2 kernel: sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA May 22 16:52:40 mega2 kernel: sda: sda1 sda2 May 22 16:52:40 mega2 kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk May 22 16:52:40 mega2 kernel: dracut: Scanning devices sda2 for LVM logical volumes vg_r378120301/lv_root vg_r378120301/lv_swap May 22 16:52:40 mega2 kernel: dracut: inactive '/dev/vg_r378120301/lv_root' [50.00 GiB] inherit May 22 16:52:40 mega2 kernel: dracut: inactive '/dev/vg_r378120301/lv_home' [358.70 GiB] inherit May 22 16:52:40 mega2 kernel: dracut: inactive '/dev/vg_r378120301/lv_swap' [9.80 GiB] inherit May 22 16:52:40 mega2 kernel: EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: May 22 16:52:40 mega2 kernel: dracut: Mounted root filesystem /dev/mapper/vg_r378120301-lv_root May 22 16:52:40 mega2 kernel: SELinux: Disabled at runtime. May 22 16:52:40 mega2 kernel: type=1404 audit(1337698352.963:2): selinux=0 auid=4294967295 ses=4294967295 May 22 16:52:40 mega2 kernel: dracut: May 22 16:52:40 mega2 kernel: dracut: Switching root May 22 16:52:40 mega2 kernel: udev: starting version 147 May 22 16:52:40 mega2 kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0 May 22 16:52:40 mega2 kernel: scsi 0:1:0:0: Attached scsi generic sg1 type 0 May 22 16:52:40 mega2 kernel: scsi 0:1:1:0: Attached scsi generic sg2 type 0 May 22 16:52:40 mega2 kernel: scsi 0:3:0:0: Attached scsi generic sg3 type 13 May 22 16:52:40 mega2 kernel: ses 0:3:0:0: Attached Enclosure device May 22 16:52:40 mega2 kernel: iTCO_vendor_support: vendor-support=0 May 22 16:52:40 mega2 kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 May 22 16:52:40 mega2 kernel: iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) May 22 16:52:40 mega2 kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) May 22 16:52:40 mega2 kernel: i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 May 22 16:52:40 mega2 kernel: ACPI: I/O resource 0000:00:1f.3 [0x1180-0x119f] conflicts with ACPI region SMIO [0x1180-0x119f] May 22 16:52:40 mega2 kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver May 22 16:52:40 mega2 kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: May 22 16:52:40 mega2 kernel: EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: May 22 16:52:40 mega2 kernel: Adding 10272760k swap on /dev/mapper/vg_r378120301-lv_swap. Priority:-1 extents:1 across:10272760k May 22 16:52:40 mega2 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team May 22 16:52:40 mega2 kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max) May 22 16:52:40 mega2 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team May 22 16:52:40 mega2 kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready May 22 16:52:40 mega2 kernel: e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None May 22 16:52:40 mega2 kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready May 22 16:52:40 mega2 rpc.statd[1764]: Version 1.2.3 starting May 22 16:52:40 mega2 sm-notify[1765]: Version 1.2.3 starting May 22 16:52:40 mega2 kernel: RPC: Registered udp transport module. May 22 16:52:40 mega2 kernel: RPC: Registered tcp transport module. May 22 16:52:40 mega2 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module. May 22 16:52:40 mega2 lldpad: bound ctrl iface to /com/intel/lldpad May 22 16:52:40 mega2 kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb(a)candelatech.com> May 22 16:52:40 mega2 kernel: All bugs added by David S. Miller <davem(a)redhat.com> May 22 16:52:40 mega2 kernel: 8021q: adding VLAN 0 to HW filter on device eth0 May 22 16:52:40 mega2 kernel: bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v1.0.8 (Oct 02, 2011) ... ... ... May 23 00:01:24 mega2 kernel: ------------[ cut here ]------------ May 23 00:01:24 mega2 kernel: WARNING: at net/sched/sch_generic.c:261 dev_watchdog+0x26d/0x280() (Not tainted) May 23 00:01:24 mega2 kernel: Hardware name: X9SCL/X9SCM May 23 00:01:24 mega2 kernel: NETDEV WATCHDOG: eth0 (e1000e): transmit queue 0 timed out May 23 00:01:24 mega2 kernel: Modules linked in: ipt_REDIRECT xt_conntrack iptable_mangle nf_conntrack_ftp ipt_LOG xt_limit xt_multiport iptable_nat nf_nat bnx2fc fcoe libfcoe 8021q garp stp llc libfc scsi_transport_fc scsi_tgt sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support ses enclosure sg ext4 mbcache jbd2 sd_mod crc_t10dif e1000e aacraid(U) dm_mirror dm_region_hash dm_log dm_mod be2iscsi bnx2i cnic uio ipv6 cxgb4i cxgb4 cxgb3i libcxgbi cxgb3 mdio libiscsi_tcp qla4xxx iscsi_boot_sysfs libiscsi scsi_transport_iscsi [last unloaded: scsi_wait_scan] May 23 00:01:24 mega2 kernel: Pid: 0, comm: swapper Not tainted 2.6.32-220.17.1.el6.x86_64 #1 May 23 00:01:24 mega2 kernel: Call Trace: May 23 00:01:24 mega2 kernel: <IRQ> [<ffffffff81069c97>] ? warn_slowpath_common+0x87/0xc0 May 23 00:01:24 mega2 kernel: [<ffffffff81069d86>] ? warn_slowpath_fmt+0x46/0x50 May 23 00:01:24 mega2 kernel: [<ffffffff8144ab2d>] ? dev_watchdog+0x26d/0x280 May 23 00:01:24 mega2 kernel: [<ffffffff8107d2b4>] ? mod_timer+0x144/0x220 May 23 00:01:24 mega2 kernel: [<ffffffff8144a8c0>] ? dev_watchdog+0x0/0x280 May 23 00:01:24 mega2 kernel: [<ffffffff8107cab7>] ? run_timer_softirq+0x197/0x340 May 23 00:01:24 mega2 kernel: [<ffffffff810a0dc0>] ? tick_sched_timer+0x0/0xc0 May 23 00:01:24 mega2 kernel: [<ffffffff8102aead>] ? lapic_next_event+0x1d/0x30 May 23 00:01:24 mega2 kernel: [<ffffffff81072291>] ? __do_softirq+0xc1/0x1d0 May 23 00:01:24 mega2 kernel: [<ffffffff810958b0>] ? hrtimer_interrupt+0x140/0x250 May 23 00:01:24 mega2 kernel: [<ffffffff8100c24c>] ? call_softirq+0x1c/0x30 May 23 00:01:24 mega2 kernel: [<ffffffff8100de85>] ? do_softirq+0x65/0xa0 May 23 00:01:24 mega2 kernel: [<ffffffff81072075>] ? irq_exit+0x85/0x90 May 23 00:01:24 mega2 kernel: [<ffffffff814f5450>] ? smp_apic_timer_interrupt+0x70/0x9b May 23 00:01:24 mega2 kernel: [<ffffffff8100bc13>] ? apic_timer_interrupt+0x13/0x20 May 23 00:01:24 mega2 kernel: <EOI> [<ffffffff812c4f9e>] ? intel_idle+0xde/0x170 May 23 00:01:24 mega2 kernel: [<ffffffff812c4f81>] ? intel_idle+0xc1/0x170 May 23 00:01:24 mega2 kernel: [<ffffffff813fa537>] ? cpuidle_idle_call+0xa7/0x140 May 23 00:01:24 mega2 kernel: [<ffffffff81009e06>] ? cpu_idle+0xb6/0x110 May 23 00:01:24 mega2 kernel: [<ffffffff814d479a>] ? rest_init+0x7a/0x80 May 23 00:01:24 mega2 kernel: [<ffffffff81c1ff7b>] ? start_kernel+0x424/0x430 May 23 00:01:24 mega2 kernel: [<ffffffff81c1f33a>] ? x86_64_start_reservations+0x125/0x129 May 23 00:01:24 mega2 kernel: [<ffffffff81c1f438>] ? x86_64_start_kernel+0xfa/0x109 May 23 00:01:24 mega2 kernel: ---[ end trace 142cbdb308188d13 ]--- May 23 00:01:24 mega2 kernel: e1000e 0000:04:00.0: eth0: Reset adapter ---//end first log with reset apapter//---> <--//second log with new driver//--- May 23 10:08:22 mega2 kernel: e1000e: Intel(R) PRO/1000 Network Driver - 1.11.3-NAPI May 23 10:08:22 mega2 kernel: e1000e: Copyright(c) 1999 - 2012 Intel Corporation. May 23 10:08:22 mega2 kernel: e1000e 0000:04:00.0: Disabling ASPM L0s May 23 10:08:22 mega2 kernel: e1000e 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 May 23 10:08:22 mega2 kernel: scsi 0:1:0:0: Direct-Access TOSHIBA MBF245LRC 6104 PQ: 1 ANSI: 5 May 23 10:08:22 mega2 kernel: scsi 0:1:1:0: Direct-Access TOSHIBA MBF245LRC 6104 PQ: 1 ANSI: 5 May 23 10:08:22 mega2 kernel: usb 1-1.2: new full speed USB device using ehci_hcd and address 3 May 23 10:08:22 mega2 kernel: Refined TSC clocksource calibration: 3092.973 MHz. May 23 10:08:22 mega2 kernel: Switching to clocksource tsc May 23 10:08:22 mega2 kernel: e1000e 0000:04:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:75:ad:38 May 23 10:08:22 mega2 kernel: e1000e 0000:04:00.0: eth0: Intel(R) PRO/1000 Network Connection May 23 10:08:22 mega2 kernel: e1000e 0000:04:00.0: eth0: MAC: 4, PHY: 8, PBA No: FFFFFF-0FF May 23 10:08:22 mega2 kernel: e1000e 0000:05:00.0: Disabling ASPM L0s May 23 10:08:22 mega2 kernel: e1000e 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 May 23 10:08:22 mega2 kernel: usb 1-1.2: New USB device found, idVendor=0557, idProduct=2221 May 23 10:08:22 mega2 kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 May 23 10:08:22 mega2 kernel: usb 1-1.2: Product: Hermon USB hidmouse Device May 23 10:08:22 mega2 kernel: usb 1-1.2: Manufacturer: Winbond Electronics Corp May 23 10:08:22 mega2 kernel: usb 1-1.2: configuration #1 chosen from 1 choice May 23 10:08:22 mega2 kernel: input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4 May 23 10:08:22 mega2 kernel: generic-usb 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.2/input0 May 23 10:08:22 mega2 kernel: input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input5 May 23 10:08:22 mega2 kernel: generic-usb 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.2/input1 May 23 10:08:22 mega2 kernel: input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6 May 23 10:08:22 mega2 kernel: e1000e 0000:05:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:75:ad:39 May 23 10:08:22 mega2 kernel: e1000e 0000:05:00.0: eth1: Intel(R) PRO/1000 Network Connection May 23 10:08:22 mega2 kernel: e1000e 0000:05:00.0: eth1: MAC: 4, PHY: 8, PBA No: FFFFFF-0FF May 23 10:08:22 mega2 kernel: scsi: waiting for bus probes to complete ... May 23 10:08:22 mega2 kernel: scsi 0:3:0:0: Enclosure ADAPTEC Virtual SGPIO PQ: 0 ANSI: 5 May 23 10:08:22 mega2 kernel: sd 0:0:0:0: [sda] 878686208 512-byte logical blocks: (449 GB/418 GiB) May 23 10:08:22 mega2 kernel: sd 0:0:0:0: [sda] Write Protect is off May 23 10:08:22 mega2 kernel: sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA May 23 10:08:22 mega2 kernel: sda: sda1 sda2 May 23 10:08:22 mega2 kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk May 23 10:08:22 mega2 kernel: dracut: Scanning devices sda2 for LVM logical volumes vg_r378120301/lv_root vg_r378120301/lv_swap May 23 10:08:22 mega2 kernel: dracut: inactive '/dev/vg_r378120301/lv_root' [50.00 GiB] inherit May 23 10:08:22 mega2 kernel: dracut: inactive '/dev/vg_r378120301/lv_home' [358.70 GiB] inherit May 23 10:08:22 mega2 kernel: dracut: inactive '/dev/vg_r378120301/lv_swap' [9.80 GiB] inherit May 23 10:08:22 mega2 kernel: EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: May 23 10:08:22 mega2 kernel: dracut: Mounted root filesystem /dev/mapper/vg_r378120301-lv_root May 23 10:08:22 mega2 kernel: SELinux: Disabled at runtime. May 23 10:08:22 mega2 kernel: type=1404 audit(1337760494.977:2): selinux=0 auid=4294967295 ses=4294967295 May 23 10:08:22 mega2 kernel: dracut: May 23 10:08:22 mega2 kernel: dracut: Switching root May 23 10:08:22 mega2 kernel: udev: starting version 147 May 23 10:08:22 mega2 kernel: ses 0:3:0:0: Attached Enclosure device May 23 10:08:22 mega2 kernel: iTCO_vendor_support: vendor-support=0 May 23 10:08:22 mega2 kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 May 23 10:08:22 mega2 kernel: iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) May 23 10:08:22 mega2 kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) May 23 10:08:22 mega2 kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0 May 23 10:08:22 mega2 kernel: scsi 0:1:0:0: Attached scsi generic sg1 type 0 May 23 10:08:22 mega2 kernel: scsi 0:1:1:0: Attached scsi generic sg2 type 0 May 23 10:08:22 mega2 kernel: ses 0:3:0:0: Attached scsi generic sg3 type 13 May 23 10:08:22 mega2 kernel: i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 May 23 10:08:22 mega2 kernel: ACPI: I/O resource 0000:00:1f.3 [0x1180-0x119f] conflicts with ACPI region SMIO [0x1180-0x119f] May 23 10:08:22 mega2 kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver May 23 10:08:22 mega2 kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: May 23 10:08:22 mega2 kernel: EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: May 23 10:08:22 mega2 kernel: Adding 10272760k swap on /dev/mapper/vg_r378120301-lv_swap. Priority:-1 extents:1 across:10272760k May 23 10:08:22 mega2 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team May 23 10:08:22 mega2 kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max) May 23 10:08:22 mega2 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team May 23 10:08:22 mega2 kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready May 23 10:08:22 mega2 kernel: e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None May 23 10:08:22 mega2 kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready May 23 10:08:22 mega2 rpc.statd[1753]: Version 1.2.3 starting May 23 10:08:22 mega2 sm-notify[1754]: Version 1.2.3 starting May 23 10:08:22 mega2 kernel: RPC: Registered udp transport module. May 23 10:08:22 mega2 kernel: RPC: Registered tcp transport module. May 23 10:08:22 mega2 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module. May 23 10:08:22 mega2 lldpad: bound ctrl iface to /com/intel/lldpad May 23 10:08:22 mega2 kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb(a)candelatech.com> May 23 10:08:22 mega2 kernel: All bugs added by David S. Miller <davem(a)redhat.com> May 23 10:08:22 mega2 kernel: 8021q: adding VLAN 0 to HW filter on device eth0 May 23 10:08:22 mega2 kernel: bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v1.0.8 (Oct 02, 2011) ... ... ... May 23 10:32:26 mega2 kernel: ------------[ cut here ]------------ May 23 10:32:26 mega2 kernel: WARNING: at net/sched/sch_generic.c:261 dev_watchdog+0x26d/0x280() (Not tainted) May 23 10:32:26 mega2 kernel: Hardware name: X9SCL/X9SCM May 23 10:32:26 mega2 kernel: NETDEV WATCHDOG: eth0 (e1000e): transmit queue 0 timed out May 23 10:32:26 mega2 kernel: Modules linked in: ipt_REDIRECT xt_conntrack iptable_mangle nf_conntrack_ftp ipt_LOG xt_limit xt_multiport iptable_nat nf_nat bnx2fc fcoe 8021q libfcoe libfc garp stp llc scsi_transport_fc scsi_tgt sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables i2c_i801 i2c_core sg iTCO_wdt iTCO_vendor_support ses enclosure ext4 mbcache jbd2 sd_mod crc_t10dif e1000e(U) aacraid(U) dm_mirror dm_region_hash dm_log dm_mod be2iscsi bnx2i cnic uio ipv6 cxgb4i cxgb4 cxgb3i libcxgbi cxgb3 mdio libiscsi_tcp qla4xxx iscsi_boot_sysfs libiscsi scsi_transport_iscsi [last unloaded: scsi_wait_scan] May 23 10:32:26 mega2 kernel: Pid: 0, comm: swapper Not tainted 2.6.32-220.17.1.el6.x86_64 #1 May 23 10:32:26 mega2 kernel: Call Trace: May 23 10:32:26 mega2 kernel: <IRQ> [<ffffffff81069c97>] ? warn_slowpath_common+0x87/0xc0 May 23 10:32:26 mega2 kernel: [<ffffffff8101bf06>] ? intel_pmu_enable_all+0xa6/0x150 May 23 10:32:26 mega2 kernel: [<ffffffff81069d86>] ? warn_slowpath_fmt+0x46/0x50 May 23 10:32:26 mega2 kernel: [<ffffffff8144ab2d>] ? dev_watchdog+0x26d/0x280 May 23 10:32:26 mega2 kernel: [<ffffffff8144a8c0>] ? dev_watchdog+0x0/0x280 May 23 10:32:26 mega2 kernel: [<ffffffff8107cab7>] ? run_timer_softirq+0x197/0x340 May 23 10:32:26 mega2 kernel: [<ffffffff810a0dc0>] ? tick_sched_timer+0x0/0xc0 May 23 10:32:26 mega2 kernel: [<ffffffff8102aead>] ? lapic_next_event+0x1d/0x30 May 23 10:32:26 mega2 kernel: [<ffffffff81072291>] ? __do_softirq+0xc1/0x1d0 May 23 10:32:26 mega2 kernel: [<ffffffff810958b0>] ? hrtimer_interrupt+0x140/0x250 May 23 10:32:26 mega2 kernel: [<ffffffff8100c24c>] ? call_softirq+0x1c/0x30 May 23 10:32:26 mega2 kernel: [<ffffffff8100de85>] ? do_softirq+0x65/0xa0 May 23 10:32:26 mega2 kernel: [<ffffffff81072075>] ? irq_exit+0x85/0x90 May 23 10:32:26 mega2 kernel: [<ffffffff814f5450>] ? smp_apic_timer_interrupt+0x70/0x9b May 23 10:32:26 mega2 kernel: [<ffffffff8100bc13>] ? apic_timer_interrupt+0x13/0x20 May 23 10:32:26 mega2 kernel: <EOI> [<ffffffff812c4f9e>] ? intel_idle+0xde/0x170 May 23 10:32:26 mega2 kernel: [<ffffffff812c4f81>] ? intel_idle+0xc1/0x170 May 23 10:32:26 mega2 kernel: [<ffffffff813fa537>] ? cpuidle_idle_call+0xa7/0x140 May 23 10:32:26 mega2 kernel: [<ffffffff81009e06>] ? cpu_idle+0xb6/0x110 May 23 10:32:26 mega2 kernel: [<ffffffff814d479a>] ? rest_init+0x7a/0x80 May 23 10:32:26 mega2 kernel: [<ffffffff81c1ff7b>] ? start_kernel+0x424/0x430 May 23 10:32:26 mega2 kernel: [<ffffffff81c1f33a>] ? x86_64_start_reservations+0x125/0x129 May 23 10:32:26 mega2 kernel: [<ffffffff81c1f438>] ? x86_64_start_kernel+0xfa/0x109 May 23 10:32:26 mega2 kernel: ---[ end trace 9dfbc5721c4b2955 ]--- May 23 10:32:26 mega2 kernel: e1000e 0000:04:00.0: eth0: Reset adapter ---//end second log with the same error//---> I am unfortunately at a loss, what could the problem be? Thanks Sebastian

1 0

Centos 6 - vnc - authentication is required to set the network proxy used for downloading packages
by Frank Cox 23 May '12

23 May '12

A window keeps popping up on my remote desktop stating "authentication is required to set the network proxy used for downloading packages. An application is attempting to perform an action that requires privileges. Authentication as the super user is required to perform this action" and asking for the root password. If I hit cancel it comes back several minutes later. I've found several references to this issue doing various google searches, but nothing that clearly states a solution. How can I get rid of this? -- MELVILLE THEATRE ~ Real D 3D Digital Cinema ~ www.melvilletheatre.com www.creekfm.com - FIFTY THOUSAND WATTS of POW WOW POWER!

2 4

CentOS in the world
by Muhammad A. Fatahna 23 May '12

23 May '12

Hi all, Now, i still analyse about CentOS user, how to know the amount of centos users around the world that can be get a result CentOS percentage of all distributions. thank you very much -- http://mafatahna.web.id @mafatahna

3 4

Secure VNC access from iPad
by david 23 May '12

23 May '12

Dear Gurus If any of you have been successful in using an iPad as a VNC client with SSH tunnelling, I'd love to know how it's done. I have tried using the iSSH application, but without success. I know that the server is accessible from a Windows client (using TigerVNC), via an SSH tunnel, so the server is properly configured. If you have a working example, please let me know what magic sauce you used. Thanks David

3 2

Centos 6 - tigervnc - numbers on keypad
by Frank Cox 23 May '12

23 May '12

I have a ncurses-based program that runs on a vnc desktop on a remote computer. On Centos 5 you could enter numbers into the program using the numeric keypad. I just installed a new machine running Centos 6 to do this same job and now numbers can only be entered using the numbers across the top of the keyboard. The program still recognizes the keys on the keypad when numlock is not set (so you get home, pgup, left and right cursor, etc.) but I get nothing when I set the numlock key. Having said that, I do see activity when I set numlock and run the xev program, so the keypresses are obviously getting through. How can I make this thing accept numbers from the numeric keypad on Centos 6? Do I have to re-write the ncurses program to recognize some different keycodes? -- MELVILLE THEATRE ~ Real D 3D Digital Cinema ~ www.melvilletheatre.com www.creekfm.com - FIFTY THOUSAND WATTS of POW WOW POWER!

1 0

← Newer
1
...
5
6
7
8
9
10
11
...
21
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss May 2012