Discuss January 2014

discuss@lists.centos.org

194 participants
172 discussions

Re: [CentOS] A question about 7
by m.roth＠5-cent.us 15 Jan '14

15 Jan '14

Warren Young wrote: > On 1/13/2014 07:33, m.roth(a)5-cent.us wrote: <snip> >> Reason for this: at one of my local sf clubs, I've been trying to install Evergreen, F/OSS library software, on a system, and it's a nightmare. >> They seem to have been building it for Ubuntu whateverthelatestanimalis. The >> biggest problem is, IIRC, eventhandler and memchached; oh, and it uses postgresql 9, and nothing else. PGSQL 9 was not a big deal to install, but the other stuff.... Even trying to build it in /usr/local is a royal mess:though I've got the dbi installed, ./configure can't find it. > > Post an actual error message, and someone may be able to help. That's not a problem, well, the issue, as I said, is that configure can't find the interface, even when I've given it the correct paths. Can't really just give it to you, since a) I'm at work, in the DC 'burbs, and b) the clubhouse is up in Baltimore. Not building it at home - I've got other things to build (like xtrackcad).... Thanks for the offer, though. I'm sure there's either some environment variable it isn't happy with, or is missing, or an option isn't right to tell it what path to use. mark

14 30

Advice in Time Sync
by Ku Wei Xiong 15 Jan '14

15 Jan '14

Dear all, I would need some advice as I am a beginner in CentOS. The question is as follows: How to set up timing if NTP was block by ISP? I have try many way such as link the timezone , getting from the hardware clock.However , it is not the solution. Please advice. -- Regards, Ku Wei Xiong 0166365831

8 8

Re: [CentOS] A question about 7
by Les Mikesell 15 Jan '14

15 Jan '14

On Wed, Jan 15, 2014 at 6:05 AM, Steve Clark <sclark(a)netwolves.com> wrote: > On 01/14/2014 08:34 PM, Les Mikesell wrote: > > On Tue, Jan 14, 2014 at 7:17 PM, Warren Young <warren(a)etr-usa.com> wrote: > > I don't know about "less consistent", but I always considered it a > feature in Linux vs the BSDs or big iron Unix that I could always count > on the first network interface being "eth0". > > What does 'first' mean? And the same one isn't consistently first. > > I get that network interfaces can move around on you, but I thought that > was why they started putting the MAC address in the ifcfg-eth? scripts. > What problem did that not solve, that we had to switch to this new system? > > The problem is when you clone a disk and ship it to a location with > 'hands-on' support that doesn't know linux to install in a new chassis > that will arrive there at the same time. Somehow you have to get > someone to put the 4 network cables in the right NICs before anything > can connect. With things tied to MAC addresses that you don't know > ahead of time, nothing will work. > > Now I have to remember which *PCI slot* my Ethernet card is in when I > run "ifconfig" unless I want to dig through the full listing. > > Yes, but that's something you _can_ know. > > How can you know it? And if you know which port is which why isn't in the > instruction > with the drive so the people on site know which port is which? If you insert the card yourself, you obviously know the slot. And you can tell the position from the back just by looking at it. But Centos6 will detect in random order, so knowing the name on one box doesn't help with another. We have to go through contortions plugging on cable in at a time, doing an 'ifconfig up' and checking which interface shows link up. And the people doing that part wish we used more windows instead of Linux. -- Les Mikesell lesmikesell(a)gmail.com

4 6

Dovecot gives hard time in pulling virtual mail box, please help
by Ganesh Hariharan 15 Jan '14

15 Jan '14

I have configured postfix with Virtual mailbox and it works but dovecot is not working I have done the following configured SSL and enabled all the required configurations... and when I pull the mails using CRAM-MD5, (server password is generated in this format) Jan 16 00:18:39 ns dovecot: pop3(info(a)ghhdomain.com): Debug: maildir++: root=/var/spool/mail/ghhdomain.com/info, index=, control=, inbox=/var/spool/mail/ghhdomain.com/info Jan 16 00:18:39 ns dovecot: pop3(info(a)ghhdomain.com): Disconnected: Logged out top=0/0, retr=0/0, del=0/0, size=0 Jan 16 00:18:40 ns dovecot: auth: Debug: auth client connected (pid=4236) Jan 16 00:18:40 ns dovecot: auth: Debug: client in: AUTH#0111#011PLAIN#011service=pop3#011secured#011lip=10.0.0.12#011rip=10.0.0.12#011lport=995#011rport=50067#011resp=<hidden> Jan 16 00:18:40 ns dovecot: auth: Debug: passwd-file(info(a)ghhdomain.com,10.0.0.12): lookup: user=info(a)ghhdomain.com file=/etc/dovecot/passwd Jan 16 00:18:40 ns dovecot: auth: Debug: client out: OK#0111#011user= info(a)ghhdomain.com Jan 16 00:18:40 ns dovecot: auth: Debug: master in: REQUEST#0112155479041#0114236#0111#011d58c5836d46ea88f7459b06abcd46540 Jan 16 00:18:40 ns dovecot: auth: Debug: passwd(info(a)ghhdomain.com,10.0.0.12): lookup Jan 16 00:18:40 ns dovecot: auth: passwd(info(a)ghhdomain.com,10.0.0.12): unknown user Jan 16 00:18:40 ns dovecot: auth: Debug: passwd-file(info(a)ghhdomain.com,10.0.0.12): lookup: user=info(a)ghhdomain.com file=/etc/dovecot/users Jan 16 00:18:40 ns dovecot: auth: Debug: master out: USER#0112155479041# 011info(a)ghhdomain.com#011uid=503#011gid=503#011home=/var/spool/mail/ghhdomain.com/info/ Jan 16 00:18:40 ns dovecot: pop3-login: Login: user=<info(a)ghhdomain.com>, method=PLAIN, rip=10.0.0.12, lip=10.0.0.12, mpid=4237, TLS Jan 16 00:18:40 ns dovecot: pop3(info(a)ghhdomain.com): Debug: Effective uid=503, gid=503, home=/var/spool/mail/ghhdomain.com/info/ Jan 16 00:18:40 ns dovecot: pop3(info(a)ghhdomain.com): Debug: maildir++: root=/var/spool/mail/ghhdomain.com/info, index=, control=, inbox=/var/spool/mail/ghhdomain.com/info Jan 16 00:18:40 ns dovecot: pop3(info(a)ghhdomain.com): Disconnected: Logged out top=0/0, retr=0/0, del=0/0, size=0 thx ghh

1 0

(no subject)
by Niharika Toppari 15 Jan '14

15 Jan '14

niharika.toppari(a)gmail.com

1 0

Re: [CentOS] A question about 7
by Les Mikesell 15 Jan '14

15 Jan '14

On Wed, Jan 15, 2014 at 6:08 AM, Steve Clark <sclark(a)netwolves.com> wrote: > > On Tue, Jan 14, 2014 at 7:17 PM, Warren Young <warren(a)etr-usa.com> wrote: > Now I have to remember which *PCI slot* my Ethernet card is in when I > run "ifconfig" unless I want to dig through the full listing. > Yes, but that's something you _can_ know. > > So... which PCI/PCI-e slots are associated with the dual gigabit NICs > integrated in/on every ASUS board I've bought over the last 8 years? > > I wouldn't know on the first one, but the important thing is that if > you have 50 identical servers they would all be the same for the same > physical location. The way 6.x works, the motherboard set and the > pair on the card will randomly flip in the initial detection. With > 5.x having the MAC address in the ifcfg-ethx file was enough. With > 6.x you also need a udev rule to nail the name down. These get tied > to MAC addresses in the initial install, but that makes it painful to > clone systems or restore backups into a different box. > > Hmm... we have over a 1000 units in the field and CentOS always enumerates > the 6 ethx interfaces the > same - as they are labeled by the manufacturer of the hardware. This has > continued to be consistent even > when the manufacturer upgraded the MB. > Are these Dells using the bios name conventions? Or maybe it works better if all NICs are the same vendor/model. Ours mostly have onboard Broadcomms's and Intel cards, and they routinely flip pairs of interfaces - the sets on the motherboard and on any particular card will stay in the same order, but the order of the motherboard set and any card will be random during the install. Worse, when you move a drive to a different chassis, the old udev rules keep any of the new set from matching any old name. -- Les Mikesell lesmikesell(a)gmail.com

1 0

CentOS-announce Digest, Vol 107, Issue 8
by centos-announce-request＠centos.org 15 Jan '14

15 Jan '14

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2014:0023 CentOS 6 resource-agents Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 14 Jan 2014 16:13:28 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0023 CentOS 6 resource-agents Update To: centos-announce(a)centos.org Message-ID: <20140114161328.GA7616(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0023 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0023.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 53e9b64590c180ce4d3a0a3fabc3c18d031d5467b3b67fa37a9caf68d30f1d91 resource-agents-3.9.2-40.el6_5.5.i686.rpm b7eca179a40cf55be6fee5bba1c7d70fb7cec3b4edf9b68cccfbf289b1957792 resource-agents-sap-3.9.2-40.el6_5.5.i686.rpm x86_64: 2fcc7e147248a76a3163b86f0cd474047e8dfee524feffa4fd61c76052ecce84 resource-agents-3.9.2-40.el6_5.5.x86_64.rpm 6859ae32a47bb262ce8b8e34257cf6a6beca4657905b6ce5c15fe2c4213f7635 resource-agents-sap-3.9.2-40.el6_5.5.x86_64.rpm Source: c8226fea10675a07fcf7fe3f012efdffbab32595f1765d612c355e879773257b resource-agents-3.9.2-40.el6_5.5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 107, Issue 8 ***********************************************

1 0

libapreq2
by Dwayne Hottinger 15 Jan '14

15 Jan '14

Is there no package for libapreq2 anymore? Im trying to get netdisco setup on a new centos 6.5 server and cant find any package that provides this module. ddh -- Dwayne Hottinger Network Administrator Harrisonburg City Public Schools

2 1

SSSD and usermod
by Mitja Mihelič 15 Jan '14

15 Jan '14

Hi! How to get usermod working with SSSD/389DS ? We have SSSD set up on our server and it uses 389DS. SSSD was enabled with the following command: authconfig --enablesssd --enablesssdauth --ldapbasedn=dc=example,dc=com --enableshadow --enablemkhomedir --enablelocauthorize --update Running for example "usermod -L username" returns: usermod: user 'username' does not exist in /etc/passwd Each time usermod is executed there is a query logged in 389DS, so SSSD does pass the request to 389DS. Strace (attached) of usermod shows that it gets at least gecos back from SSSD and that it checked the /var/lib/sss/mc/passwd file which contains: username Name Lastname /home/username /bin/bash Soon after that it starts to open /etc/shadow and /etc/passwd. What are we missing? Any insight would be appreciated. Regards, Mitja -- -- Mitja Mihelič ARNES, Tehnološki park 18, p.p. 7, SI-1001 Ljubljana, Slovenia tel: +386 1 479 8877, fax: +386 1 479 88 78

2 4

krb5-1.10.3-10.el6_4.6.src.rpm
by Mahmoud 15 Jan '14

15 Jan '14

Hello, I download krb5-1.10.3-10.el6_4.6.src.rpm<http://ftp.redhat.com/pub/redhat/linux/enterprise/6Server/en/os/SRPMS/krb5-…>from http://ftp.redhat.com/pub/redhat/linux/enterprise/6Server/en/os/SRPMS/. In Cenos 6.5, I use following instructions: rpm -i krb5-1.10.3-10.el6_4.6.src.rpm rpmbuild -ba /home/mockbuild/rpmbuild/SPECS/krb5.spec The RPMs that has been built are el6.6. I need el6_4.6 RPMs. Could you help me please? Best regards.

3 3

← Newer
1
...
8
9
10
11
12
13
14
...
18
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss January 2014