Discuss June 2014

discuss@lists.centos.org

122 participants
119 discussions

Loss of Ethernet adaptor
by James B. Byrne 06 Jun '14

06 Jun '14

At ~07:40 (UTC-4:00) this morning our gateway host lost its WAN Ethernet adaptor. Subsequent to recovery, which required a reboot, the following entries were find in /var/log/messages: Jun 6 07:39:50 gway02 kernel: PING_FLOOD: IN=eth0 OUT= MAC=00:25:90:61:74:c0:00 :24:14:2b:f2:80:08:00 SRC=74.205.112.125 DST=216.185.71.33 LEN=64 TOS=0x00 PREC= 0x00 TTL=50 ID=30954 PROTO=ICMP TYPE=8 CODE=0 ID=25496 SEQ=0 Jun 6 07:39:53 gway02 kernel: PROBE_BLACKIST: IN=eth0 OUT=eth1 SRC=122.235.101. 24 DST=216.185.71.249 LEN=52 TOS=0x08 PREC=0x20 TTL=45 ID=26123 DF PROTO=TCP SPT =54197 DPT=445 WINDOW=8192 RES=0x00 SYN URGP=0 Jun 6 07:40:49 gway02 kernel: PROBE_BLACKIST: IN=eth0 OUT=eth1 SRC=183.179.211. 126 DST=216.185.71.132 LEN=48 TOS=0x08 PREC=0x40 TTL=111 ID=14994 PROTO=UDP SPT= 35947 DPT=49591 LEN=28 Jun 6 07:40:49 gway02 kernel: pciehp 0000:00:1c.4:pcie04: Card not present on Slot(0-1) Jun 6 07:40:49 gway02 kernel: e1000e 0000:02:00.0: eth0: removed PHC Jun 6 07:40:49 gway02 kernel: pciehp 0000:00:1c.4:pcie04: Card present on Slot(0-1) Jun 6 07:40:50 gway02 kernel: e1000e 0000:02:00.0: eth0: Timesync Tx Control register not set as expected Jun 6 07:40:50 gway02 kernel: e1000e 0000:02:00.0: PCI INT A disabled Jun 6 07:40:51 gway02 ntpd[1238]: Deleting interface #67 eth0, fe80::225:90ff:fe61:74c0#123, interface stats: received=0, sent=0, dropped=0, active_time=229449 secs Jun 6 07:40:51 gway02 ntpd[1238]: Deleting interface #57 eth0, 216.185.64.54#123, interface stats: received=1122, sent=1122, dropped=0, active_time=229449 secs Jun 6 07:40:51 gway02 ntpd[1238]: 24.72.103.44 interface 216.185.64.54 -> (none) lspci -tv # provides this device tree -[0000:00]-+-00.0 Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx DMI Bridge . . . +-1c.0-[01]-- +-1c.4-[02]----00.0 Intel Corporation 82574L Gigabit Network Connection +-1c.5-[03]----00.0 Intel Corporation 82574L Gigabit Network Connection . . . lspci -v -nn -k -qq -D # provides this information: . . . 0000:02:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3] Subsystem: Super Micro Computer Inc Device [15d9:10d3] Physical Slot: 0-1 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fe9e0000 (32-bit, non-prefetchable) [size=128K] I/O ports at dc00 [size=32] Memory at fe9dc000 (32-bit, non-prefetchable) [size=16K] Capabilities: [c8] Power Management version 2 Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [e0] Express Endpoint, MSI 00 Capabilities: [a0] MSI-X: Enable+ Count=5 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number 00-25-90-ff-ff-61-74-c0 Kernel driver in use: e1000e Kernel modules: e1000e . . . I have never run into this before. Can anyone cast any light on what might be going on? Is this an incipient hardware failure with one of the on-board PCI Ethernet adaptors? Is there any relationship with the syn flood that was blacklisted immediately before the failure? I do not thinks so but I need to ask. Thanks, -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

4 3

CentOS-announce Digest, Vol 112, Issue 3
by centos-announce-request＠centos.org 06 Jun '14

06 Jun '14

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2014:0625 Important CentOS 6 openssl Update (Karanbir Singh) 2. CESA-2014:0626 Important CentOS 6 openssl098e Update (Karanbir Singh) 3. CESA-2014:0626 Important CentOS 5 openssl097a Update (Karanbir Singh) 4. CESA-2014:0624 Important CentOS 5 openssl Update (Karanbir Singh) 5. Re: CESA-2014:0624 Important CentOS 5 openssl Update (Karanbir Singh) 6. CESA-2014:0624 Important CentOS 5 openssl Update (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Thu, 5 Jun 2014 13:06:47 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2014:0625 Important CentOS 6 openssl Update To: centos-announce(a)centos.org Message-ID: <20140605130647.GA3604(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:0625 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-0625.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 3ad06a284d64b200cc39d15152cb4bca571040d500b2384859298c9b56326877 openssl-1.0.1e-16.el6_5.14.i686.rpm 022af3211b1eac37da65a1fba3987394c3772bf88b3fbc02a5b5d654040cbd5a openssl-devel-1.0.1e-16.el6_5.14.i686.rpm f47ec60ca5246b494e9b3c442045c51b583efd0270aa43c773916f92d4abefeb openssl-perl-1.0.1e-16.el6_5.14.i686.rpm 41bfb05683299268a7f2f58cd60c1e22d300dd034109feb598045b7fd2f08db9 openssl-static-1.0.1e-16.el6_5.14.i686.rpm x86_64: 3ad06a284d64b200cc39d15152cb4bca571040d500b2384859298c9b56326877 openssl-1.0.1e-16.el6_5.14.i686.rpm 414c27d70eeaac128eb7367472913cd5c4a6e62866e2226b18cab36a7fec3247 openssl-1.0.1e-16.el6_5.14.x86_64.rpm 022af3211b1eac37da65a1fba3987394c3772bf88b3fbc02a5b5d654040cbd5a openssl-devel-1.0.1e-16.el6_5.14.i686.rpm 060234549bfdc54830b055f51fb732c7210e33e70ea5aa1075c0d9e7504af54a openssl-devel-1.0.1e-16.el6_5.14.x86_64.rpm 5481b3acd593f2704943b39d8738ea98f8fcdc1e5d479ce3fa28175c9d4020c6 openssl-perl-1.0.1e-16.el6_5.14.x86_64.rpm 1f56277882bcf56df3c17f8c4bfc017c677fafe142100aca3385d2d6b9d48815 openssl-static-1.0.1e-16.el6_5.14.x86_64.rpm Source: 5e60e75d09db8bde7a5db4f8d3abfa00574a2c739ac4b29d6c8b9c1129b6a11b openssl-1.0.1e-16.el6_5.14.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Thu, 5 Jun 2014 13:21:51 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2014:0626 Important CentOS 6 openssl098e Update To: centos-announce(a)centos.org Message-ID: <20140605132151.GA11598(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:0626 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-0626.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 4911acddf50a3f48cc5d2ce6f4011193a06112142a2d93e7e9f36aa7fd44e1bd openssl098e-0.9.8e-18.el6_5.2.i686.rpm x86_64: 4911acddf50a3f48cc5d2ce6f4011193a06112142a2d93e7e9f36aa7fd44e1bd openssl098e-0.9.8e-18.el6_5.2.i686.rpm 5da4e81c728ae6199597cdd1107e244b7920e1d3425828db435bff7b22c62509 openssl098e-0.9.8e-18.el6_5.2.x86_64.rpm Source: 25cdd2928d00f8aec7e84cd5937ecf9ad869256c980634a9c7132e75cfeccce2 openssl098e-0.9.8e-18.el6_5.2.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Thu, 5 Jun 2014 13:38:36 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2014:0626 Important CentOS 5 openssl097a Update To: centos-announce(a)centos.org Message-ID: <20140605133836.GA16614(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:0626 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-0626.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 28a83a987c35bf2297a33d7e75703d345953cbb4ab2033f2e06a8be94b7ded0e openssl097a-0.9.7a-12.el5_10.1.i386.rpm x86_64: 28a83a987c35bf2297a33d7e75703d345953cbb4ab2033f2e06a8be94b7ded0e openssl097a-0.9.7a-12.el5_10.1.i386.rpm 56e0b690fa9182cc84f3ae8d7a0062cb0789b0f4a39045953eae63419f5dbb57 openssl097a-0.9.7a-12.el5_10.1.x86_64.rpm Source: 995d2c032cde0e3249e21f266e726217cbfe4ae7a0ed034855e4bc981407a890 openssl097a-0.9.7a-12.el5_10.1.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Fri, 6 Jun 2014 01:40:21 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2014:0624 Important CentOS 5 openssl Update To: centos-announce(a)centos.org Message-ID: <20140606014021.GA17576(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:0624 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-0624.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 6fee0b4cad3b320d1a458d70470117f0a8dedca45409c7723aea93269db915c2 openssl-0.9.8e-27.el5_10.3.i386.rpm 24425dcac0303acf3b8963e7a47c771174f148c5340fbf0115f41942918581db openssl-0.9.8e-27.el5_10.3.i686.rpm 56906e8d8c47d080eaa20b3ca64ff1d48a7b2051e18c2cf062de8495025ed250 openssl-devel-0.9.8e-27.el5_10.3.i386.rpm 1a42f6d2cd7fec0a1b3b2d789471f742de162695c1293611d8a37eda16290d2f openssl-perl-0.9.8e-27.el5_10.3.i386.rpm x86_64: 24425dcac0303acf3b8963e7a47c771174f148c5340fbf0115f41942918581db openssl-0.9.8e-27.el5_10.3.i686.rpm 0928ee38fa24d2106d507f2150bb329b293ca568632f864d2abcaa986f86d927 openssl-0.9.8e-27.el5_10.3.x86_64.rpm 56906e8d8c47d080eaa20b3ca64ff1d48a7b2051e18c2cf062de8495025ed250 openssl-devel-0.9.8e-27.el5_10.3.i386.rpm b11f44b82ecab9c848cbdf8dd467a003c3f4de100fa2ca753c836e242fb9d669 openssl-devel-0.9.8e-27.el5_10.3.x86_64.rpm b8e5f845d70c8396ba3db70ef4a5c4f2351d0d9bc73e588ea3fbcd9b1c9c4e1e openssl-perl-0.9.8e-27.el5_10.3.x86_64.rpm Source: 1c7dd3c3ff456e2c1f04c016172558db7e8bf26699102dbc29a1a3220372d8f2 openssl-0.9.8e-27.el5_10.3.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Fri, 06 Jun 2014 03:25:58 +0100 From: Karanbir Singh <kbsingh(a)centos.org> Subject: Re: [CentOS-announce] CESA-2014:0624 Important CentOS 5 openssl Update To: centos-announce(a)centos.org Message-ID: <539126B6.90701(a)centos.org> Content-Type: text/plain; charset=ISO-8859-1 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 *** This announcement contains invalid SHA256SUM's *** Apologies for this folks, this update announcement contains the wrong SHA SUM's, and I'm pushing out another announcement with the right ones. Please NOTE: this is only an error on the announcements email, there were no rpms issued that should not have been. The wrong sha sum's were generated by me, importing to release the wrong metadata ( these packages had not been signed at the time when the announcement email metadata got generated ). The pre-release tests caught this and prevented the rpms from being released. A re-announcement with the correct sha256sum's along with the rpms is now seeding out to the mirrors. On 06/06/2014 02:40 AM, Karanbir Singh wrote: > > CentOS Errata and Security Advisory 2014:0624 Important > > Upstream details at : > https://rhn.redhat.com/errata/RHSA-2014-0624.html > > The following updated files have been uploaded and are currently > syncing to the mirrors: ( sha256sum Filename ) > > i386: > 6fee0b4cad3b320d1a458d70470117f0a8dedca45409c7723aea93269db915c2 > openssl-0.9.8e-27.el5_10.3.i386.rpm > 24425dcac0303acf3b8963e7a47c771174f148c5340fbf0115f41942918581db > openssl-0.9.8e-27.el5_10.3.i686.rpm > 56906e8d8c47d080eaa20b3ca64ff1d48a7b2051e18c2cf062de8495025ed250 > openssl-devel-0.9.8e-27.el5_10.3.i386.rpm > 1a42f6d2cd7fec0a1b3b2d789471f742de162695c1293611d8a37eda16290d2f > openssl-perl-0.9.8e-27.el5_10.3.i386.rpm > > x86_64: > 24425dcac0303acf3b8963e7a47c771174f148c5340fbf0115f41942918581db > openssl-0.9.8e-27.el5_10.3.i686.rpm > 0928ee38fa24d2106d507f2150bb329b293ca568632f864d2abcaa986f86d927 > openssl-0.9.8e-27.el5_10.3.x86_64.rpm > 56906e8d8c47d080eaa20b3ca64ff1d48a7b2051e18c2cf062de8495025ed250 > openssl-devel-0.9.8e-27.el5_10.3.i386.rpm > b11f44b82ecab9c848cbdf8dd467a003c3f4de100fa2ca753c836e242fb9d669 > openssl-devel-0.9.8e-27.el5_10.3.x86_64.rpm > b8e5f845d70c8396ba3db70ef4a5c4f2351d0d9bc73e588ea3fbcd9b1c9c4e1e > openssl-perl-0.9.8e-27.el5_10.3.x86_64.rpm > > Source: > 1c7dd3c3ff456e2c1f04c016172558db7e8bf26699102dbc29a1a3220372d8f2 > openssl-0.9.8e-27.el5_10.3.src.rpm > > > - -- Karanbir Singh, Project Lead, The CentOS Project +44-207-0999389 | http://www.centos.org/ | twitter.com/CentOS GnuPG Key : http://www.karan.org/publickey.asc -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iEYEARECAAYFAlORJrYACgkQMA29nj4Tz1vlrgCeLs79yVt7z59BxRoAsBmQItZ2 iKwAmgIKZdE5NZTF6KH08DQY1Ld68fdd =tmTS -----END PGP SIGNATURE----- ------------------------------ Message: 6 Date: Fri, 6 Jun 2014 02:05:41 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2014:0624 Important CentOS 5 openssl Update To: centos-announce(a)centos.org Message-ID: <20140606020541.GA19162(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:0624 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-0624.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 85be8285cdf1da22ad41407244d65b14d3a0e6336bf6a0df93ca7db8586c438b openssl-0.9.8e-27.el5_10.3.i386.rpm 0f45cc416a5a3d1d12b64354e8f7bd5bbaae405400f559044119f3da78d96734 openssl-0.9.8e-27.el5_10.3.i686.rpm 6173233de2e71b310a27f166f83115fc42f7e0258b45bf4eef673215e0ce1373 openssl-devel-0.9.8e-27.el5_10.3.i386.rpm c7ed5539399b45e5c88bfff2f2a30d19ef0b27575c6efdb1099036aa47dcf750 openssl-perl-0.9.8e-27.el5_10.3.i386.rpm x86_64: 0f45cc416a5a3d1d12b64354e8f7bd5bbaae405400f559044119f3da78d96734 openssl-0.9.8e-27.el5_10.3.i686.rpm 17013b9940ecc58a8627922b70fbd77fd517dd80cc2bb2bb4e37705f7bf95353 openssl-0.9.8e-27.el5_10.3.x86_64.rpm 6173233de2e71b310a27f166f83115fc42f7e0258b45bf4eef673215e0ce1373 openssl-devel-0.9.8e-27.el5_10.3.i386.rpm 508d9a4bc5ea61c5b84ce2bfa5aaf3c9b1bec97f3a5caf8cb6e4a7d3cbf02883 openssl-devel-0.9.8e-27.el5_10.3.x86_64.rpm 5e77479be327088ad06922fd14366aef4eb4d763bb25e4f2fa20350e543eb701 openssl-perl-0.9.8e-27.el5_10.3.x86_64.rpm Source: cc0b4c125d0fccfb0a18b8395ca554627e76f03d5c2dc8d20d4f0c40b4ddc31e openssl-0.9.8e-27.el5_10.3.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 112, Issue 3 ***********************************************

1 0

Vanitygen on centos linux
by XMUDA Linux 06 Jun '14

06 Jun '14

Hi to all... After a hard search i dont found the way to install Vanitygen to make Bitcoin addres on centos. After 3 days i decide to find the way and make the how to. I post the how to on bitcointalk.com and want to share with centos people. How to link: https://bitcointalk.org/index.php?topic=641328.msg7159690#msg7159690 Post on Bitcointalk: Was realy hard to make these install, but now vanitygen works in my Centos linux server. About the server: Code:[windows@localhost ~]$ uname -a Linux localhost.localdomain 2.6.32-431.17.1.el6.centos.plus.x86_64 #1 SMP Thu May 8 02:18:11 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux First error: Code:[windows@localhost vanitygen]$ make cc -ggdb -O3 -Wall -I/usr/src/redhat/BUILD/openssl-1.0.1e/include -c -o pattern.o pattern.c pattern.c:32:18: error: pcre.h: No existe el fichero o el directorio pattern.c:1604: error: expected specifier-qualifier-list before ‘pcre’ pattern.c: En la función ‘vg_regex_context_add_patterns’: pattern.c:1623: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_nalloc’ pattern.c:1625: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_nalloc’ pattern.c:1626: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_nalloc’ pattern.c:1636: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_regex’ pattern.c:1637: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_regex_extra’ pattern.c:1638: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_regex_pat’ pattern.c:1641: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_nalloc’ pattern.c:1642: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_regex’ pattern.c:1643: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_regex’ pattern.c:1643: error: ‘pcre’ no se declaró aquí (primer uso en esta función) pattern.c:1643: error: (Cada identificador no declarado solamente se reporta una vez pattern.c:1643: error: para cada funcion en la que aparece.) pattern.c:1643: error: expected expression before ‘)’ token pattern.c:1644: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_regex_extra’ pattern.c:1644: error: ‘pcre_extra’ no se declaró aquí (primer uso en esta función) pattern.c:1644: error: expected expression before ‘)’ token pattern.c:1645: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_regex_pat’ pattern.c:1646: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_nalloc’ pattern.c:1651: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_regex’ pattern.c:1652: aviso: declaración implícita de la función ‘pcre_compile’ pattern.c:1654: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_regex’ pattern.c:1667: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_regex_extra’ pattern.c:1668: aviso: declaración implícita de la función ‘pcre_study’ pattern.c:1668: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_regex’ pattern.c:1671: aviso: declaración implícita de la función ‘pcre_free’ pattern.c:1671: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_regex’ pattern.c:1674: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_regex_pat’ pattern.c: En la función ‘vg_regex_context_clear_all_patterns’: pattern.c:1692: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_regex_extra’ pattern.c:1693: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_regex_extra’ pattern.c:1694: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_regex’ pattern.c: En la función ‘vg_regex_context_free’: pattern.c:1706: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_nalloc’ pattern.c:1707: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_regex’ pattern.c: En la función ‘vg_regex_test’: pattern.c:1723: error: ‘pcre’ no se declaró aquí (primer uso en esta función) pattern.c:1723: error: ‘re’ no se declaró aquí (primer uso en esta función) pattern.c:1764: aviso: declaración implícita de la función ‘pcre_exec’ pattern.c:1764: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_regex’ pattern.c:1765: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_regex_extra’ pattern.c:1771: error: ‘PCRE_ERROR_NOMATCH’ no se declaró aquí (primer uso en esta función) pattern.c:1779: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_regex’ pattern.c:1783: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_regex’ pattern.c:1788: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_regex_pat’ pattern.c:1797: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_regex’ pattern.c:1798: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_regex_extra’ pattern.c:1799: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_regex_extra’ pattern.c:1806: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_regex’ pattern.c:1806: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_regex’ pattern.c:1807: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_regex_extra’ pattern.c:1808: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_regex_extra’ pattern.c:1809: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_regex_pat’ pattern.c:1809: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_regex_pat’ pattern.c: En la función ‘vg_regex_context_new’: pattern.c:1840: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_regex’ pattern.c:1841: error: ‘vg_regex_context_t’ no tiene un miembro llamado ‘vcr_nalloc’ make: *** [pattern.o] Error 1 that will be fixed with: Code:[root@localhost vanitygen]# yum install pcre-devel Second error: Code:[windows@localhost vanitygen]$ ./vanitygen 1BTC Difficulty: 77178 vanitygen: pattern.c:164: vg_exec_context_init: Assertion `vxcp->vxc_key' failed. Abortado that was a little bit hard to fix, but i fond the solution: Code:mkdir ~/devel cd ~/devel wget http://openssl.org/source/openssl-1.0.1g.tar.gz tar xfz openssl-1.0.1g.tar.gz cd openssl-1.0.1g ./config --prefix=/opt/openssl-1.0.1g zlib-dynamic shared make sudo make install_sw Now we download vanitigen from: Code:https://github.com/samr7/vanitygen/archive/master.zip And we need to edit the make file: Code:export LD_RUN_PATH=/opt/openssl-1.0.1g/lib LIBS=-lpcre -lcrypto -lm -lpthread CFLAGS=-ggdb -O3 -Wall -L/opt/openssl-1.0.1g/lib OBJS=vanitygen.o oclvanitygen.o oclvanityminer.o oclengine.o keyconv.o pattern.o util.o PROGS=vanitygen keyconv oclvanitygen oclvanityminer PLATFORM=$(shell uname -s) ifeq ($(PLATFORM),Darwin) OPENCL_LIBS=-framework OpenCL else OPENCL_LIBS=-lOpenCL endif most: vanitygen keyconv all: $(PROGS) vanitygen: vanitygen.o pattern.o util.o $(CC) $^ -o $@ $(CFLAGS) $(LIBS) oclvanitygen: oclvanitygen.o oclengine.o pattern.o util.o $(CC) $^ -o $@ $(CFLAGS) $(LIBS) $(OPENCL_LIBS) oclvanityminer: oclvanityminer.o oclengine.o pattern.o util.o $(CC) $^ -o $@ $(CFLAGS) $(LIBS) $(OPENCL_LIBS) -lcurl keyconv: keyconv.o util.o $(CC) $^ -o $@ $(CFLAGS) $(LIBS) clean: rm -f $(OBJS) $(PROGS) $(TESTS) It works to me and hope it works for all the Centos users.

1 0

Re: [CentOS] Analyzing the MBR
by m.roth＠5-cent.us 05 Jun '14

05 Jun '14

John R Pierce wrote: > On 6/5/2014 1:56 PM, m.roth(a)5-cent.us wrote: >> mkpart pri 0.0GB x.GB >> *always* gives me aligned partions (and parted - talk about user hostile programs! "Not aligned", with not a clue as to what it actually wants....) > > I've taken to always running parted with -a none, as its alignment rules are based on old concepts like cylinders, heads, which are meaningless and even WRONG on today's storage devices. (63 heads, 255 sectors is not uncommon, this means everything at a cylinder or head is on an ODD sector boundary, ouch!) Dunno 'bout that, but my method is what I found after much googling, and seem to provide better throughput on the drives, *esp* if they're large (> 2TB), and have physical sectors of 4k, but which are usually presented as the traditional 512B mark PS: I HATE manitu, I *hate* IX, and I've emailed them to that effect, the *ssh*l*s. I'll ask again: is it against the rules of this list to have whitelisted posters?

1 0

Re: [CentOS] [OT] OSX-10.9.3 cd ~'/ problem with spaces'
by James B. Byrne 05 Jun '14

05 Jun '14

On Tue, June 3, 2014 12:13, SilverTip257 wrote: > Escape the space with a backslash. > cd ~/Library/Application\ Support > hll-m22:~ byrnejb$ cd ~/Library/Application\ Support -bash: cd: /Users/byrnejb/Library/Application: No such file or directory hll-m22:~ byrnejb$ cd ~/"Library/Application\ Support" -bash: cd: /Users/byrnejb/Library/Application\: No such file or directory On Tue, June 3, 2014 12:37, Stephen Harris wrote: > The OP likely has a function called "cd" which does other stuff (sets > the prompt?) and then calls the builtin cd, but its not quoting the > variables properly and so breaking. > hll-m22:~ byrnejb$ alias alias ..='cd ..' alias ...='cd ../..' alias copy='cp -i' alias cp='cp -i' alias etl='~/projects/proforma.git/vendor/plugins/activewarehouse-etl/bin/etl' alias la='ls -la' alias ll='ls -l' alias mate='gvim -c NERDTree' alias mc='mc -c' alias mcd='mount /mnt/cdrom' alias rm='rm -i' alias search='grep' alias ucd='umount /mnt/cdrom' $ unalias cd -bash: unalias: cd: not found On Tue, June 3, 2014 13:03, Paul Heinlein wrote: > Try > > cd "${HOME}/Library/Application Support/" > hll-m22:~ byrnejb$ cd "${HOME}/Library/Application Support/" -bash: cd: /Users/byrnejb/Library/Application: No such file or directory I had already tried many different ways of specifying the target directory before giving up and asking for help. The suggestions concerning a cd alias seem promising because at one time I had RVM installed, which does override cd. There is no alias present but there are artefacts of rvm scattered about so I will check these. Thanks for the help. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

7 7

parsing out adjacent text
by Tim Dunphy 05 Jun '14

05 Jun '14

hey all, I'm trying to figure out how to use apache's mod_status module to figure out which of the web servers in a farm of six are processing more requests than others. I'm writing a script to grep out requests per second from the status module like this: [root@uszmpwslp014lc ~]# GET http://$(hostname -i)/server-status | grep -i requests/sec <dt>4.08 requests/sec - 80.9 kB/second - 19.8 kB/request</dt> That works ok. And next I'm grepping it back down and awking it to just the part I'm interested in: [root@uszmpwslp014lc ~]# GET http://$(hostname -i)/server-status | grep -i -e request -e requests/sec | grep -i -v -e currently -e code -e ss | awk '{print $1}' <dt>4.08 But now I need to get rid of just the <dt> in front of the 4.08? I think I may be able to use the 'cut' command to do this, but I'm unsure how. Any thoughts? Thanks Tim -- GPG me!! gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B

7 11

chromium-34.0.1847.132-4.el6
by ngeorgop 05 Jun '14

05 Jun '14

New EL6 compilation of chromium (34.0.1847.132) (aura) Based on russian fedora build Build with devtools-2 (http://people.centos.org/tru/devtools-2/readme) chromium-34.0.1847.132-4.el6.i686.rpm https://drive.google.com/file/d/0B9RlkKQB1POSM1ByMUNMaWNVYmM/edit?usp=shari… chromium-34.0.1847.132-4.el6.src.rpm https://drive.google.com/file/d/0B9RlkKQB1POSNk05U0tlYU1DR1k/edit?usp=shari… It works with latest flash taken from chrome (non-free) e.g. http://pull-mirror.yandex.net/fedora/russianfedora/russianfedora/nonfree/fe… -- View this message in context: http://centos.1050465.n5.nabble.com/CentOS-chromium-34-0-1847-132-4-el6-tp5… Sent from the CentOS mailing list archive at Nabble.com.

2 1

Samba 4.1.7 + CentOS 6.5 - Home's directory mounting in W7 + Roaming of Profils
by Pascal Blétard 05 Jun '14

05 Jun '14

Hello all, I progress slowly in my installation of Samba; but I'm confronted to two problems: 1) Is it possible to configure Samba (4.1.7) directly from GNU/Linux (CentOS 6.5) for automatically mount the user's home directory to "H:" when he connects to the domain ? 2) In addition, after that, I'll try to set up profiles' roaming. Here's my files: ---------------------------------------------- smb.conf (simplified after many tests) ---------------------------------------------- # Global parameters [global] #general naming workgroup = ADS realm = ADS.LOCAL netbios name = SERVER server string = File Server #logging log file = /usr/local/samba/var/log/%m.log max log size = 50 log level = 8 server role = active directory domain controller dns forwarder = 172.16.130.7 idmap_ldb:use rfc2307 = yes # These (uncommented) lines changes nothing # add user script = /usr/local/samba/sbin/add-user-script.sh %D %U %L #logon script = logon.bat #logon path = \\%L\\profile\\%U #logon drive = H: [netlogon] # this line isn't root preexec = /bin/bash /usr/local/samba/sbin/create-profile-directory.sh %D %U %L path = /usr/local/samba/var/locks/sysvol/ads.local/scripts read only = No #browsable=yes is for test only browsable=yes [sysvol] path = /usr/local/samba/var/locks/sysvol read only = No browsable=No [profile] comment = Roaming profiles path = /home/%D/profiles/ #browsable=yes is for test only browsable = yes writable = yes [homes] comment = %S's home root preexec = /bin/bash /usr/local/samba/sbin/create-home-directory.sh %D %S path = /home/%D/files/%S browsable = no ---------------------------------------------- create-home-directory.sh : ---------------------------------------------- #!/bin/bash if [ ! -e /home/$1/files/$2 ]; then mkdir -p /home/$1/files/$2 chmod 775 /home/$1/files/$2 chown $2:"Domain Users" /home/$1/files/$2 fi exit 0 ---------------------------------------------- create-profile-directory.sh : ---------------------------------------------- #!/bin/bash if [ ! -e /home/$1/profiles/$2 ]; then mkdir -p /home/$1/profiles/$2 chmod 775 /home/$1/profiles/$2 chown $2:"Domain Users" /home/$1/profiles/$2 pdbedit -u $2 -D "H:" -S "\\$3\\netlogon\\logon.bat" -h "$3\\$2 fi exit 0 ---------------------------------------------- add-user-script.sh: ---------------------------------------------- #!/bin/bash /usr/sbin/useradd -s /bin/false -d /home/$1/files/$2 -m $2 pdbedit -u $2 -D "H:" -S "\\$3\\netlogon\\logon.bat" -h "$3\\$2 ---------------------------------------------- logon.bat: ---------------------------------------------- net use h: %LOGONSERVER%\%USERNAME% ----------------------------------------------- Regards. Pascal Blétard

3 3

firefox-29.0-5.1.el6
by ngeorgop 05 Jun '14

05 Jun '14

New compilation of firefox (v. 29.0) build with 1) devtools-2 (http://people.centos.org/tru/devtools-2/readme) 2) python27 (from SCL) (http://ftp.scientificlinux.org/linux/scientific/6.5/i386/external_products/…) 3) icu-last-50.1.2 from remi (http://rpms.famillecollet.com/SRPMS/) firefox-29.0-5.1.el6.i686.rpm https://drive.google.com/uc?id=0B9RlkKQB1POSOXk1OG5KODJNWFk&export=download ibicu-last-50.1.2-10.el6.i686.rpm https://drive.google.com/file/d/0B9RlkKQB1POSNW9YaWxBVWR6UVk/edit Sources: firefox-29.0-5.1.el6.src.rpm https://drive.google.com/file/d/0B9RlkKQB1POSems0VXNIWXVuSjg/edit?usp=shari… icu-last-50.1.2-10.remi.src.rpm https://drive.google.com/file/d/0B9RlkKQB1POSY0RJQTFQWlk0N3M/edit?usp=shari… Waiting for comments ngeorgop -- View this message in context: http://centos.1050465.n5.nabble.com/CentOS-firefox-29-0-5-1-el6-tp5726640.h… Sent from the CentOS mailing list archive at Nabble.com.

3 4

[SOLVED] [OT] OSX-10.9.3 cd ~'/ problem with spaces'
by James B. Byrne 05 Jun '14

05 Jun '14

I get the digest version fo this list so I apologise for any discontinuity to my reply posts introduced thereby. On Wed, June 4, 2014 15:36, Herta Van den Eynde wrote: > No OSX here either, but just to be sure, could you publish the results of: > > which cd; echo $? > locate cd | grep '/cd'$; echo $? > ls -ldb ~/Library/Application* > $(which cd) returns /usr/bin/cd and that file contains the script I displayed yesterday. I do not have my MBP here at work today so I cannot obtain the other informations you desire. In any case, once the reference to aliases twigged my memory I tested for the problem with other accounts and discovered that the issue existed only for my development user id. That brought to mind that I once had RVM installed on that account. Further, I recalled I once had run into a bug with an early development version of RVM due to it overriding cd in a shell function, which is not an alias but is similar enough for most purposes. I cannot recall what that issue was but at least the memory of it put me on the right track. So I grepped for CD in ~/\.* and found an RVM related cd function in .bash_profile which did not escape $1. I changed that reference to "$1" and the problem was thereby fixed. Thanks for all the help and suggestions. I do have a few residual questions however: 1. What does the 1+ in the shell expansion ${1+"$@"} mean and do? 2. I know that $0 returns the shell name or shell script file name. How does ${0##*/} differ in effect from $0. 3. Why is ${0##*/} used instead of $0 or ${0} in this case? -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss June 2014