Discuss July 2016

discuss@lists.centos.org

91 participants
79 discussions

Start a nNew thread

CentOS-announce Digest, Vol 137, Issue 7
by centos-announce-request＠centos.org 21 Jul '16

21 Jul '16

1 0

Re: [CentOS] yum returns error 'repolist 0'
by ge lignored 21 Jul '16

21 Jul '16

jtj and Eero, thank you for replying. please excuse delay in replying. see *additions* at end. On 07/14/2016 03:40 AM, Eero Volotinen wrote: > 2016-07-14 11:36 GMT+03:00 Jose Maria Terry Jimenez <jtj(a)tssystems.net>: >> El 14/7/16 a las 9:01, ge lignored escribió: >> >>> greetings to one and all. >>> >>> a new iso burn w/ centos 6.8 failed to boot on a 686 32 bit mid tower box, >>> but will boot a 32 bit laptop, so i dropped back to 6.7 which did boot. >>> >>> after install with centos 6.7, attempt to upgrade fails with 'repolist 0'. >>> >>> all desire repo files have enable = 1. >>> >>> searched thru past 4 yrs of personal archives, nothing found related to >>> 'repolist 0'. >>> >>> ran web search for 'repolist 0' and 'repolist = 0' with all hits related >>> to repo files having 'enable = 0'. >>> >>> any suggestions/ideas/clues as to solution of problem greatly appreciated. >>> >>> >> Hello >> >> Never seen this but i'd try >> >> yum repolist all >> fails with 'repolist: 0'. >> Lists the enabled repos? >> fails with 'repolist: 0'. >> Did you tried >> >> yum clean all >> >> Before the upgrade? >> fails with 'repolist: 0' >> I think this happens in RHEL if you have no active suscription, but not >> applicable to CentOS. >> do not have rhel installed so can not test. > You can also add yum -v or -vv to debug issue more. > > Eero > both fail with 'repolist: 0'. *additions* made a file by file comparison between 2 systems of yum directories, both have same files. i did not go thru /lib and /var files. side-note: tried to add this gmail account to thunderbird, ran into problems with gmail. next replies may be with a diff account setup using thunderbird. jtj and Eero, i thank you again for replying. much appreciated. -- peace out. CentOS GNU/Linux 6.8 tc,hago. g .

2 1

Re: [CentOS] [CentOS-announce] Announcing release of MariaDB 10.1 on CentOS Linux 6 x86_64 SCL
by Always Learning 20 Jul '16

20 Jul '16

On Tue, 2016-07-19 at 10:41 +0200, Honza Horak wrote: > QuickStart > ---------- > You can get started in three easy steps: > $ sudo yum install centos-release-scl > $ sudo yum install rh-mariadb101 > $ scl enable rh-mariadb101 bash yum install centos-release-scl No package centos-release-scl available. How does one get started with SCL ? -- Regards, Paul. England, EU. England's place is in the European Union.

2 2

CentOS6 - Stop NUX Skype auto-start with gnome desktop
by James B. Byrne 20 Jul '16

20 Jul '16

How does one configure Skype/Gnome such that one can have Skype installed but not auto-start when the Gnome desktop opens? I have looked in the 'System/Preferences/Startup Applications' menu but Skype is not listed there. There are no options in the Application itself that allow this setting either. If there no other way then I will remove the application package and re-install when I need it. But surely there is a way to control this behaviour and the problem is that I simply cannot find it. Thanks. -- *** e-Mail is NOT a SECURE channel *** Do NOT transmit sensitive data via e-Mail Do NOT open attachments nor follow links sent by e-Mail James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

2 1

yum install error http 403
by 李明伟 19 Jul '16

19 Jul '16

Hi When I install package on CentOS7 with below command : yum install <package_name> I will hit errors like: # yum install httpd Loaded plugins: fastestmirror http://centos-distro.1gservers.com/7.2.1511/os/x86_64/repodata/repomd.xml: [Errno 14] HTTP Error 403 - Forbidden Trying other mirror. To address this issue please refer to the below knowledge base article https://access.redhat.com/solutions/69319 If above article doesn't help to resolve this issue please create a bug on https://bugs.centos.org/ The link need an RedHat Product Series Number to access but I do not have one. So not read yet. I did a few search can sure about below information: 1. Do not using http_proxy in my env 2. SElinux and firewall is closed 3. yum clean all do not help I also try to replace all files in my /etc/yum.repos.d with files from a working machine. But still have error. One more thing I did is to add timeout=9999 minrate=0 in /etc/yum.conf. Because if I do not do this. There will be error like : Loaded plugins: fastestmirror http://centos-distro.1gservers.com/7.2.1511/os/x86_64/repodata/repomd.xml: [Errno 12] Timeout on http://centos-distro.1gservers.com/7.2.1511/os/x86_64/repodata/repomd.xml: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds') Trying other mirror. Please help me to look this. Thanks very much

3 2

CentOS-announce Digest, Vol 137, Issue 6
by centos-announce-request＠centos.org 19 Jul '16

19 Jul '16

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2016:1421 Important CentOS 5 httpd Security Update (Johnny Hughes) 2. CESA-2016:1422 Important CentOS 7 httpd Security Update (Johnny Hughes) 3. CESA-2016:1421 Important CentOS 6 httpd Security Update (Johnny Hughes) 4. Announcing release of NodeJS 4 on CentOS Linux 7 x86_64 SCL (Honza Horak) 5. Announcing release of Maven 3.3 on CentOS Linux 7 x86_64 SCL (Honza Horak) 6. Announcing release of Maven 3.3 on CentOS Linux 7 x86_64 SCL (Honza Horak) 7. Announcing release of Ruby 2.3 on CentOS Linux 7 x86_64 SCL (Honza Horak) 8. Announcing release of Ruby on Rails 4.2 on CentOS Linux 7 x86_64 SCL (Honza Horak) 9. Announcing release of Python 3.5 on CentOS Linux 7 x86_64 SCL (Honza Horak) 10. Announcing release of PostgreSQL 9.5 on CentOS Linux 6 x86_64 SCL (Honza Horak) 11. Announcing release of PostgreSQL 9.5 on CentOS Linux 7 x86_64 SCL (Honza Horak) 12. Announcing release of MariaDB 10.1 on CentOS Linux 6 x86_64 SCL (Honza Horak) 13. Announcing release of MariaDB 10.1 on CentOS Linux 7 x86_64 SCL (Honza Horak) ---------------------------------------------------------------------- Message: 1 Date: Mon, 18 Jul 2016 15:57:06 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2016:1421 Important CentOS 5 httpd Security Update Message-ID: <20160718155706.GA23132(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2016:1421 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2016-1421.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: ac324ee1118faf46ee81d043ab13428793816c78504177bd02be559ca45a0ad6 httpd-2.2.3-92.el5.centos.i386.rpm 7f507c251a02932b0530bcc9bbe3b684bcf333a8a55d159bd74ec45b907c7b74 httpd-devel-2.2.3-92.el5.centos.i386.rpm 9962fc21bb56a8db59b53c5a70cdbdb9288de76b4852cd93342d35edf99c93c4 httpd-manual-2.2.3-92.el5.centos.i386.rpm 193e7f1e8866422650c4fc3681ad7b8eb303ca94fbb271fc0f8e269da41ec44d mod_ssl-2.2.3-92.el5.centos.i386.rpm x86_64: 89c1aceb70086393b296f085cb3c1aadb2236f53d91028d24b65756d5e5ec0e6 httpd-2.2.3-92.el5.centos.x86_64.rpm 7f507c251a02932b0530bcc9bbe3b684bcf333a8a55d159bd74ec45b907c7b74 httpd-devel-2.2.3-92.el5.centos.i386.rpm 68223ae197beab75b2a2f18595659c5f00a2abce6af6949439098b3307b81a55 httpd-devel-2.2.3-92.el5.centos.x86_64.rpm c64e7002d0b3e256e58ebed1f1e298f47952ccb85d81bdd364e3970056993b9b httpd-manual-2.2.3-92.el5.centos.x86_64.rpm 5961b5567d7d8449ce917c2b0d3ce0c0bdcb268335d0a472b9600a33c99ce4d8 mod_ssl-2.2.3-92.el5.centos.x86_64.rpm Source: 9797c288db36a2b5610c73d9334b932ad6be5b11f259389c4e8159bdeeec7912 httpd-2.2.3-92.el5.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: JohnnyCentOS ------------------------------ Message: 2 Date: Mon, 18 Jul 2016 16:26:29 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2016:1422 Important CentOS 7 httpd Security Update Message-ID: <20160718162629.GA20680(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2016:1422 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2016-1422.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 045c43a0da2efc68117105e9018c475dc4cbb90a98aeb06542973ce953af1040 httpd-2.4.6-40.el7.centos.4.x86_64.rpm 16550ea80cc0241c3e25fece54a8ee4592fa1183056d8b72f0cd82278817554e httpd-devel-2.4.6-40.el7.centos.4.x86_64.rpm 9db85efe6e5a599a11eb853e9133e7f2e07b32cb5029c8f360bd8b9664ba31c8 httpd-manual-2.4.6-40.el7.centos.4.noarch.rpm b2f351116f23f0bef4293f62430cf6028d5b174823af5d1e53ad4c86c70ac14b httpd-tools-2.4.6-40.el7.centos.4.x86_64.rpm 388627215a1cf1cea9eac7ced702226998663154b63d10e93399a31ca3591f7e mod_ldap-2.4.6-40.el7.centos.4.x86_64.rpm 9f3104a304983a1ccf7fac98abca9a0ca411624d7ee2c998c8f1db5efb94c5b5 mod_proxy_html-2.4.6-40.el7.centos.4.x86_64.rpm cbdf94bb93b19fb4f4dbe452a3b2b2988e028bde5376782a0ec0185815b9a893 mod_session-2.4.6-40.el7.centos.4.x86_64.rpm 3f72250641bc96c5c190e933b496352c65318474492806b99ed0cab4cdbefd9d mod_ssl-2.4.6-40.el7.centos.4.x86_64.rpm Source: fc08ade63965c80e7ae80bcaef7cbbb496d76ec3e8e03409b1a223af657ef98f httpd-2.4.6-40.el7.centos.4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 3 Date: Mon, 18 Jul 2016 16:26:49 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2016:1421 Important CentOS 6 httpd Security Update Message-ID: <20160718162649.GA20815(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2016:1421 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2016-1421.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 7cfbd11f14fc880c3a658124c3124a3b4c26402790eef913f38c3468c0038922 httpd-2.2.15-54.el6.centos.i686.rpm 21388bbbc70030b07395f9f2eb7ede8c160afc19e5d661543ddd42ba53c2e8cf httpd-devel-2.2.15-54.el6.centos.i686.rpm 4cfb8a97a60511a419c6b8e46f9eacfb6f702831ca3567313f927209b6fa5e39 httpd-manual-2.2.15-54.el6.centos.noarch.rpm 1a6a381d445b88f636453f7c7d039517adccac56aef9dc03127ce46e8e284246 httpd-tools-2.2.15-54.el6.centos.i686.rpm 7b187e5603d64d06f1983e96934a8f6da181220033cf989d2aa56bdfd629b791 mod_ssl-2.2.15-54.el6.centos.i686.rpm x86_64: 906becc435e278c73dfbdf10f4f1f704b7c1fff2963037c1e3b4a2eafd795f09 httpd-2.2.15-54.el6.centos.x86_64.rpm 21388bbbc70030b07395f9f2eb7ede8c160afc19e5d661543ddd42ba53c2e8cf httpd-devel-2.2.15-54.el6.centos.i686.rpm a87645e89f72a6e9362e41251d3c1be797ce31a7b7a643f0fe506f3ab506acf2 httpd-devel-2.2.15-54.el6.centos.x86_64.rpm 4cfb8a97a60511a419c6b8e46f9eacfb6f702831ca3567313f927209b6fa5e39 httpd-manual-2.2.15-54.el6.centos.noarch.rpm 4935ca24dabd3a45f83518174ea1ab5b1b0c8d281cce4db5df04f52e5743fc9c httpd-tools-2.2.15-54.el6.centos.x86_64.rpm 94ae91901d174c21c68f50d638027ecf4ab14aba483f7294107af9192b2adfb1 mod_ssl-2.2.15-54.el6.centos.x86_64.rpm Source: 5c7a92dbb6c6503be4ccd1e270c6ce96c42c61dcafc4495fe7f2c66d2c06f7cd httpd-2.2.15-54.el6.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 4 Date: Tue, 19 Jul 2016 10:40:03 +0200 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release of NodeJS 4 on CentOS Linux 7 x86_64 SCL Message-ID: <4c740555-1669-a616-f6a7-7160f09e48eb(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of NodeJS in version 4 on CentOS Linux 7 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps: $ sudo yum install centos-release-scl $ sudo yum install rh-nodejs4 $ scl enable rh-nodejs4 bash At this point you should be able to use NodeJS just as a normal application. Here are some examples of commands you can run: $ node my-app.js $ npm install uglify-js --global $ uglifyjs my-app.js -o my-app.min.jso In order to view the individual components included in this collection, including additional NodeJS modules, you can run: $ sudo yum list rh-nodejs4\* Last but not least you can try this Software Collection in Docker. You will be able to pull the image with the following command soon (not yet ready): $ sudo docker pull centos/nodejs-4-centos7 For more on the docker image follow the link to public source repository: https://github.com/sclorg/s2i-nodejs-container For more on NodeJS in general, see https://nodejs.org. About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the collection NodeJS being released here, we also build and deliver databases, web servers, and language stacks including multiple versions of PostgreSQL, MariaDB, Apache HTTP Server, Python, Ruby, Ruby on Rails and others. You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. Enjoy! Honza (thanks trepik for preparing the announcement) ------------------------------ Message: 5 Date: Tue, 19 Jul 2016 10:40:11 +0200 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release of Maven 3.3 on CentOS Linux 7 x86_64 SCL Message-ID: <c23a6fe3-910f-391e-c723-7970fed00214(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of Maven in version 3.3 on CentOS Linux 7 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps: $ sudo yum install centos-release-scl $ sudo yum install rh-maven33 $ scl enable rh-maven33 bash At this point you should be able to use maven just as a normal application. Here are some examples of commands you can run: $ mvn --version $ mvn compile $ mvn clean dependency:copy-dependencies <package> $ mvn test In order to view the individual components included in this collection, you can run: $ sudo yum list rh-maven33\* For more on Maven in general, see http://maven.apache.org/. About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the collection Maven being released here, we also build and deliver databases, web servers, and language stacks including multiple versions of PostgreSQL, MariaDB, Apache HTTP Server, NodeJS, Python and others. You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. Enjoy! Honza (thanks trepik for preparing the announcement) ------------------------------ Message: 6 Date: Tue, 19 Jul 2016 10:40:19 +0200 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release of Maven 3.3 on CentOS Linux 7 x86_64 SCL Message-ID: <cec09370-4908-2467-3ad0-fa4c41519798(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of Maven in version 3.3 on CentOS Linux 7 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps: $ sudo yum install centos-release-scl $ sudo yum install rh-maven33 $ scl enable rh-maven33 bash At this point you should be able to use maven just as a normal application. Here are some examples of commands you can run: $ mvn --version $ mvn compile $ mvn clean dependency:copy-dependencies <package> $ mvn test In order to view the individual components included in this collection, you can run: $ sudo yum list rh-maven33\* For more on Maven in general, see http://maven.apache.org/. About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the collection Maven being released here, we also build and deliver databases, web servers, and language stacks including multiple versions of PostgreSQL, MariaDB, Apache HTTP Server, NodeJS, Python and others. You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. Enjoy! Honza (thanks trepik for preparing the announcement) ------------------------------ Message: 7 Date: Tue, 19 Jul 2016 10:40:33 +0200 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release of Ruby 2.3 on CentOS Linux 7 x86_64 SCL Message-ID: <dd350692-0da0-e649-903c-ddae3e9f40c6(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of Ruby in version 2.3 on CentOS Linux 7 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps: $ sudo yum install centos-release-scl $ sudo yum install rh-ruby23 $ scl enable rh-ruby23 bash At this point you should be able to use ruby just as a normal application. Here are some examples of commands you can run: $ ruby my-app.rb $ gem install activeresource $ bundle $ irb In order to view the individual components included in this collection, you can run: $ sudo yum list rh-ruby23\* Last but not least you can try this Software Collection in Docker. You can pull the image with the following command: $ sudo docker pull centos/ruby-23-centos7 For more on the docker image follow the link to public source repository: https://github.com/sclorg/s2i-ruby-container For more on Ruby in general, see https://www.ruby-lang.org or https://rubygems.org. About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the collection Ruby being released here, we also build and deliver databases, web servers, and language stacks including multiple versions of PostgreSQL, MariaDB, Apache HTTP Server, NodeJS, Python and others. You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. Enjoy! Honza (thanks trepik for preparing the announcement) ------------------------------ Message: 8 Date: Tue, 19 Jul 2016 10:40:40 +0200 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release of Ruby on Rails 4.2 on CentOS Linux 7 x86_64 SCL Message-ID: <14f96f75-8388-f6e1-0b1a-3abbafbad723(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of Ruby on Rails in version 4.2 on CentOS Linux 7 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps: $ sudo yum install centos-release-scl $ sudo yum install rh-ror42 $ scl enable rh-ror42 rh-nodejs4 bash At this point you should be able to use rails just as a normal application. Here are some examples of commands you can run: $ rails new project $ cd project $ rails server -p 8080 $ rails generate controller pages In order to view the individual components included in this collection, you can run: $ sudo yum list rh-ror42\* Last but not least you can try this Software Collection in Docker. You can pull the image with the following command: $ sudo docker pull centos/ror-42-centos7 For more on the docker image follow the link to public source repository: https://github.com/sclorg/ror-container For more on Ruby on Rails in general, see http://rubyonrails.org. About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the collection Ruby on Rails being released here, we also build and deliver databases, web servers, and language stacks including multiple versions of PostgreSQL, MariaDB, Apache HTTP Server, NodeJS, Python and others. You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. Enjoy! Honza (thanks trepik for preparing the announcement) ------------------------------ Message: 9 Date: Tue, 19 Jul 2016 10:40:49 +0200 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release of Python 3.5 on CentOS Linux 7 x86_64 SCL Message-ID: <067518fc-e1a9-b550-a633-499839ff2d3b(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of Python in version 3.5 on CentOS Linux 7 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps: $ sudo yum install centos-release-scl $ sudo yum install rh-python35 $ scl enable rh-python35 bash At this point you should be able to use python just as a normal application. Here are some examples of commands you can run: $ python my-app.py $ sudo easy_install Flask $ sudo easy_install Django In order to view the individual components included in this collection, including additional python modules, you can run: $ sudo yum list rh-python35\* Last but not least you can try this Software Collection in Docker. You can pull the image with the following command: $ sudo docker pull centos/python-35-centos7 For more on the docker image follow the link to public source repository: https://github.com/sclorg/s2i-python-container For more on Python in general, see https://www.python.org/. About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the collection Python being released here, we also build and deliver databases, web servers, and language stacks including multiple versions of PostgreSQL, MariaDB, Apache HTTP Server, NodeJS, Ruby, Ruby on Rails and others. You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. Enjoy! Honza (thanks trepik for preparing the announcement) ------------------------------ Message: 10 Date: Tue, 19 Jul 2016 10:40:56 +0200 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release of PostgreSQL 9.5 on CentOS Linux 6 x86_64 SCL Message-ID: <3e237996-cd81-ca47-8867-a08c1ec1d42f(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of version 9.5 of the PostgreSQL server on CentOS Linux 6 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps: $ sudo yum install centos-release-scl $ sudo yum install rh-postgresql95 $ scl enable rh-postgresql95 bash At this point you should be able to use PostgreSQL just as a normal application. Here are some examples of commands you can run: $ postgresql-setup --initdb $ service rh-postgresql95-postgresql start $ su postgres -c psql In order to view the individual components included in this collection, including additional subpackages, you can run: $ sudo yum list rh-postgresql95\* For more on PostgreSQL in general, see http://www.postgresql.org. About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the PostgreSQL collection being released here, we also build and deliver databases, web servers, and language stacks including multiple versions of MongoDB, MariaDB, Apache HTTP Server, NodeJS, Python and others. You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. Enjoy! Honza (thanks trepik for preparing the announcement) ------------------------------ Message: 11 Date: Tue, 19 Jul 2016 10:41:05 +0200 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release of PostgreSQL 9.5 on CentOS Linux 7 x86_64 SCL Message-ID: <46451d3b-0e68-2835-0dcb-cda4b3b78b1e(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of version 9.5 of the PostgreSQL server on CentOS Linux 7 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps: $ sudo yum install centos-release-scl $ sudo yum install rh-postgresql95 $ scl enable rh-postgresql95 bash At this point you should be able to use PostgreSQL just as a normal application. Here are some examples of commands you can run: $ postgresql-setup --initdb $ systemctl start rh-postgresql95-postgresql $ su postgres -c psql In order to view the individual components included in this collection, including additional subpackages, you can run: $ sudo yum list rh-postgresql95\* Last but not least you can try this Software Collection in Docker. You can pull the image with the following command: $ sudo docker pull centos/postgresql-95-centos7 For more on the docker image follow the link to public source repository: https://github.com/sclorg/postgresql-container For more on PostgreSQL in general, see http://www.postgresql.org. About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the PostgreSQL collection being released here, we also build and deliver databases, web servers, and language stacks including multiple versions of MongoDB, MariaDB, Apache HTTP Server, NodeJS, Python and others. You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. Enjoy! Honza (thanks trepik for preparing the announcement) ------------------------------ Message: 12 Date: Tue, 19 Jul 2016 10:41:12 +0200 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release of MariaDB 10.1 on CentOS Linux 6 x86_64 SCL Message-ID: <e862951f-699b-7f94-effa-5120d1fc7762(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of MariaDB in version 10.1 on CentOS Linux 6 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps: $ sudo yum install centos-release-scl $ sudo yum install rh-mariadb101 $ scl enable rh-mariadb101 bash At this point you should be able to use mariadb just as a normal application. Here are some examples of commands you can run: $ service rh-mariadb101-mariadb start $ mysql $ mysql_upgrade In order to view the individual components included in this collection, you can run: $ sudo yum list rh-mariadb101\* For more on MariaDB in general, see https://mariadb.org. About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the collection MariaDB being released here, we also build and deliver databases, web servers, and language stacks including multiple versions of PostgreSQL, MongoDB, Apache HTTP Server, NodeJS, Python and others. You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. Enjoy! Honza (thanks trepik for preparing the announcement) ------------------------------ Message: 13 Date: Tue, 19 Jul 2016 10:41:18 +0200 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release of MariaDB 10.1 on CentOS Linux 7 x86_64 SCL Message-ID: <0fbbbf5c-a1be-1d67-c8e9-43789ad856ba(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of MariaDB in version 10.1 on CentOS Linux 7 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps: $ sudo yum install centos-release-scl $ sudo yum install rh-mariadb101 $ scl enable rh-mariadb101 bash At this point you should be able to use mariadb just as a normal application. Here are some examples of commands you can run: $ systemctl start rh-mariadb101-mariadb $ mysql $ mysql_upgrade In order to view the individual components included in this collection, you can run: $ sudo yum list rh-mariadb101\* Last but not least you can try this Software Collection in Docker. You can pull the image with the following command: $ sudo docker pull centos/mariadb-101-centos7 For more on the docker image follow the link to public source repository: https://github.com/sclorg/mariadb-container For more on MariaDB in general, see https://mariadb.org. About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the collection MariaDB being released here, we also build and deliver databases, web servers, and language stacks including multiple versions of PostgreSQL, MongoDB, Apache HTTP Server, NodeJS, Python and others. You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. Enjoy! Honza (thanks trepik for preparing the announcement) ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 137, Issue 6 ***********************************************

1 0

Help with C7 start script
by Jerry Geis 18 Jul '16

18 Jul '16

Under the old C6 I put an entry in rc.local to run my programs I want. We will call it /path/boot.sh Worked fine. Under C7 I have created a new service file for systemd. It looks like: --------------- [Unit] Description=Company After=network.target [Service] Type=forking ExecStart=/path/boot.sh [Install] WantedBy=multi-user.target ----------- For the most part this works every time on boot. However - when I do a "yum update" and the kernel changes part of my boot.sh is to detect that kernel change and recompile some of my drivers. The kernel change is detected and the recomiling starts - but after some time the process just stops. If I rerun it manuall it will then complete as normal. So my question is - Is my service script above not complete? Is they system looking for it to exit in a certain amount of time and it hasnt exited so it KILLs my script ? something like that ? What is missing from my script so it does not kill it after some time ? Thanks Jerry

4 4

CentOS 7.2 and KDE
by Jeff Layton 18 Jul '16

18 Jul '16

Good afternoon, I apologize if this is off-topic. I just installed CentOS 7 on my laptop and I used KDE. I can't seem to get the "hibernate" option. I've tried editing the options under "Power" but it hasn't appeared. Any thoughts? Thanks! Jeff

3 2

Problem with cloud-init on re-boot
by Timothy Murphy 18 Jul '16

18 Jul '16

When I re-boot my CentOS 7 machine I get lots of error/warning messages like the following: ------------------------------ Jan 1 14:39:04 alfred cloud-init: 2016-01-01 14:39:04,351 - url_helper.py[WARNING]: Calling 'http://169.254.169.254/2009-04-04/meta-data/instance-id' failed [2/120s]: unexpected error ['NoneType' object has no attribute 'status_code'] ------------------------------ Re-booting with the current kernel, 3.10.0-327.22.2.el7.x86_64, sometimes fails, I think because of this problem, although the previous kernel seems to avoid the issue. I've actually disabled cloud-init, but I'm wondering if there is a simple solution to the problem? Actually, I don't remember installing cloud-init; maybe it was brought in by some other package? It's not clear to me why I should need it; is it a necessary adjunct to libvirtd? -- Timothy Murphy gayleard /at/ eircom.net School of Mathematics, Trinity College, Dublin

2 1

mate crash
by Alice Wonder 17 Jul '16

17 Jul '16

While playing an audio in totem, the mate desktop crashed. I couldn't switch to a console like I use to be able to do with ctrl-alt-F{n} - seems that is gone is from CentOS. I couldn't open a terminal by right clicking on the desktop. I was able to open a folder, navigate to /usr/bin and open gnome-terminal that way and issue the shutdown command. Since switching to virtual consoles no longer seems to work, what is the proper way to deal with rebooting a system when the window manager with all its menus crashes? CentOS 7 -- -=- Sent my from my laptop, may not be able to respond timely

2 2

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss July 2016