February 2017 - Discuss - lists.centos.org

Memory vs. Display Card
by Rick 28 Oct '25

28 Oct '25

Since memory has become quite cheap lately I decided to move from 2 GB to 6. When I installed the memory every thing was fine until I went to run level 5. At that point the screen turned to garbage and the system froze. Is there a way to fix this so I can use the memory I bought? Do I need a new display card? Current hardware: Intel D975XBX2 Motherboard VGA compatible controller: ATI Technologies Inc RV505 [Radeon X1550 64-bit] -- http://www.spinics.net/lists/

13 19

SSD for Centos SWAP /tmp & /var/ partition
by Keith Roberts 03 Sep '25

03 Sep '25

Has anyone actually used a SSD in a Centos setup? My little experiment with a s/h WD drive for /tmp and SWAP partitions kicked the bucket on Wednesday, when the poor WD drive caught the click-of-death. It was a s/h drive to start with and lasted about 4 months. But that was without the /var/log/ partition being written to it, as I mounted that back onto /var/log from the original drive. So I had to install another (WD) drive, and repartion it and rebuild my RPM package database, from the backed-up Packages file. That seems to be all OK now. I'm wondering if it would be a good idea to use a new SSD for moving all the disk i/o to, that Linux likes to do so often. Plus putting SWAP onto a decent SSD should speed things up somewhat. Here's a short video of a laptop fitted with a SSD drive booting macOS, compared to a similar laptop booting from the standard HDD. The laptop with the SSD boots and loads some apps in 28 seconds. The other one takes twice as long. http://eshop.macsales.com/shop/SSD/OWC/Mercury_Extreme_Pro_6G/?utm_source=t… Kind Regards, Keith Roberts ----------------------------------------------------------------- Websites: http://www.karsites.net http://www.php-debuggers.net http://www.raised-from-the-dead.org.uk All email addresses are challenge-response protected with TMDA [http://tmda.net] -----------------------------------------------------------------

33 96

ipa rpm conflicts
by lejeczek 04 Aug '17

04 Aug '17

does anybody see this: unning transaction Warning: RPMDB altered outside of yum. ** Found 8 pre-existing rpmdb problem(s), 'yum check' output follows: ipa-admintools-4.4.0-14.el7.centos.noarch has installed conflicts freeipa-admintools: ipa-admintools-4.4.0-14.el7.centos.noarch ipa-client-4.4.0-14.el7.centos.x86_64 has installed conflicts freeipa-client: ipa-client-4.4.0-14.el7.centos.x86_64 ipa-client-common-4.4.0-14.el7.centos.noarch has installed conflicts freeipa-client-common: ipa-client-common-4.4.0-14.el7.centos.noarch ipa-common-4.4.0-14.el7.centos.noarch has installed conflicts freeipa-common: ipa-common-4.4.0-14.el7.centos.noarch ipa-python-compat-4.4.0-14.el7.centos.noarch has installed conflicts freeipa-python-compat: ipa-python-compat-4.4.0-14.el7.centos.noarch ipa-server-4.4.0-14.el7.centos.x86_64 has installed conflicts freeipa-server: ipa-server-4.4.0-14.el7.centos.x86_64 ipa-server-common-4.4.0-14.el7.centos.noarch has installed conflicts freeipa-server-common: ipa-server-common-4.4.0-14.el7.centos.noarch ipa-server-dns-4.4.0-14.el7.centos.noarch has installed conflicts freeipa-server-dns: ipa-server-dns-4.4.0-14.el7.centos.noarch this in .rpm I guess and started appearing after upg to 7.3. *freeipa* is naming convention Fedora uses, right? Some remnants rebase did not take care of? regards, L.

4 3

Installing support for Chinese text in Centos 7
by H 18 Jul '17

18 Jul '17

I have just done a minimal installation of Centos7 followed by X Windows and the Mate desktop on a workstation. Although the default language is English, I would like to be able to write Chinese text in various applications. I seem to remember this was very easy to do in Centos 6 and Gnome: possibly only requiring only a simple 'yum groupinstall "Chinese Support"' after which I could use iBus to switch between languages. This does not seem to work in Centos 7. Suggestions? Thank you.

4 14

CentOS 6.8 and samba
by isdtor 23 May '17

23 May '17

Other than the original 6.8 release version 3.6.23-33, samba has not been functioning correctly for me under 6.8. The symptoms are that about 6-7 days after starting the server, users start complaining that they can no longer open documents on their share. Upon inspection, I find several, sometimes nearly a dozen smb processes owned by a single user, on top of those run under root. Stopping the service does not stop these processes. They are only killable with SIGKILL, and after that, a service restart does not result in a functioning service, i.e. connections are refused, which can be verified easily with smbclient. The only cure is a server reboot. And it is not the same user id every time it happens. Useful logs of any type are not available. I have tested -35 and -36, both show the same behaviour. This is a production server and I have no time for tinkering; downgrading to -33 and blocking samba updates is the only workaround for now.

6 12

howto install yumex
by geo.inbox.ignored 07 Apr '17

07 Apr '17

greetings. trying to install yumex, but obviously have forgotten what i did previously to install packages. sudo yum install yumex* errors out with; No package yumex* available. please inform my chemo brain what is correct. tia. -- peace out. CentOS GNU/Linux 7.1511 tc,hago. g . =+= Tired of having your microsoft os hacked? Change to Linux os, used by microsoft hackers. =+= in a world with out fences, who needs gates. =+=

7 16

How to enable the svm cpu flag inside a vm?
by Leonard den Ottolander 03 Apr '17

03 Apr '17

Hello, I'm trying to get the Android Emulator to run inside a kvm vm on CentOS-6. Apparently the latest Android Emulators cannot run without hardware acceleration so I am trying to get the vm to see the svm cpu flag. Host: $ grep model\ name /proc/cpuinfo | sort -u model name : AMD Phenom(tm) II X4 965 Processor $ grep svm /proc/cpuinfo | sort -u flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save $ cat /sys/module/kvm_amd/parameters/nested 1 I have tried copying the cpu options (Opteron_G3) in the host cpu configuration and setting the svm flag to either "model", "required" or "force" to no avail: $ ps waux | grep qemu qemu 7962 7.2 21.9 3722092 2680668 ? Rl 13:23 6:36 /usr/libexec/qemu-kvm -name C7-Android -S -M rhel6.6.0 -cpu Opteron_G3,+invtsc,+wdt,+skinit,+ibs,+osvw,+3dnowprefetch,+cr8legacy, +extapic,+cmp_legacy,+3dnow,+3dnowext,+pdpe1gb,+fxsr_opt,+mmxext,+ht, +vme -enable-kvm -m 3072 -realtime mlock=off -smp <snip> So the question is: How do I enable the svm flag in the guest? Regards, Leonard. -- mount -t life -o ro /dev/dna /genetic/research

4 7

I want to connect to a l2tp server from centos.
by Eliezer Croitoru 22 Mar '17

22 Mar '17

I have a server currently connecting to a pptp remote server. This server(lns\lac) has the option for pptp connections and l2tp connections. The l2tp connections are not using ipsec encryption at all. I have seen couple guides\tutorials on the internet: - https://raymii.org/s/tutorials/IPSEC_L2TP_vpn_on_CentOS_-_Red_Hat_Enterpris… - https://wiki.archlinux.org/index.php/L2TP/IPsec_VPN_client_setup But all the guides that I have found are using ipsec with "secret". On ubuntu there is a gui applet that helps setting these kind of connections up but I am working with a CentOS server and not Ubuntu desktop. If someone used l2tp the same way I want to use on CentOS 7 please give me some advice. If you have a guide which might help me I will be more then happy to see this one. Thanks, Eliezer

4 8

An 'orrible question: Outlook 365 under wine on CentOS?
by m.roth＠5-cent.us 21 Mar '17

21 Mar '17

Either CentOS 6 or 7 - anyone know if it's possible? Upper Management has decided on a policy that IMAP is going to go away in the near future, and they want everyone on Lookout, sorry, Outlook 365. mark, VMNH* * Very Much Not Happy

14 22

[Fwd: The CentOS list]
by Valeri Galtsev 15 Mar '17

15 Mar '17

Dear All, Mark has problem sending mail to centos(a)centos.org list... He has trouble with flash plugin on CentOS 6, please, take a look at his e-mail below. I'll try to see what I can do to help, but what I can do definitely is no match to Experts on this list. Thanks in advance! Valeri ---------------------------- Original Message ---------------------------- Subject: The CentOS list From: m.roth(a)5-cent.us Date: Mon, January 30, 2017 3:11 pm To: "Valeri Galtsev" <galtsev(a)kicp.uchicago.edu> -------------------------------------------------------------------------- Hi, Valeri, I've tried, twice, to post to the list today, and they neither show up, *nor* do I get a blocked message - they just go to /dev/null. The second was just a test, the first was asking if anyone else was seeing, with CentOS 6 (updated) flash-plugin crashing every 10-15 min. And there's no downgrade for it. mark ++++++++++++++++++++++++++++++++++++++++ Valeri Galtsev Sr System Administrator Department of Astronomy and Astrophysics Kavli Institute for Cosmological Physics University of Chicago Phone: 773-702-4247 ++++++++++++++++++++++++++++++++++++++++

5 6

Systemd debug logging turned on in CentOS 7
by Thomas Eriksson 28 Feb '17

28 Feb '17

Hi, I noticed that some, but not all, of my CentOS 7 machines have these kernel parameters for turning on systemd debug level logging added to the grub.cfg file. systemd.log_level=debug systemd.log_target=kmsg The parameters are *not* in the /etc/default/grub file, so if I rebuild grub.cfg with grub2-mkconfig, they disappear. I am a bit puzzled over how they got introduced. Has anyone else seen this? thanks, Thomas

5 8

sshd Match Group directive problem
by Bernard Fay 28 Feb '17

28 Feb '17

I try to set up two "Match Group" directives in sshd_config. I have an LDAP server. All users including admins are part of the LDAP group users. The admins users are also part of the LDAP group wheel. For example: [~]groups admin1 admin1 : users wheel [~]groups users user1 : users On a client server to LDAP, I try to configure two "Match Group" directives in sshd_config as follows: Match Group wheel some keywords... Match Group users some keywords... The problem is that even if a user is a member of LDAP group wheel, the "Match Group wheel" directive is skipped in favor of the "Match Group users" directive. Is it possible to have two "Match Group" directives as I like to do it? If yes, what is wrong in my configuration? Thanks,

2 2

Checksums for git repo content?
by Leonard den Ottolander 27 Feb '17

27 Feb '17

Hi all, Since the vault for 7.3.1611 has been cleared out last sunday (20170207) - why is that? - I'm using git to download a "SRPM", or more accurately, its contents. However, using git has one major drawback: It is missing checksums for the files. Are there any plans to provide checksums for the files in git so I can be sure that what I download is actually not tampered with? SRPMS are signed so we can be sure there content is what you provided. Regards, Leonard. -- mount -t life -o ro /dev/dna /genetic/research

8 20

kernel update/reboot best practice question
by Valeri Galtsev 27 Feb '17

27 Feb '17

Dear All, Quite some time ago I have noticed that kernel updated quite often "come in pairs". That is, if there was no kernel update for quite some time, and, say, today kernel update for some system level (say, CentOS 6) was released, then it is quite likely that there will be yet one more kernel update for the same system level 3-5 days later. As if the kernel is first patched quick and dirty, then more careful and comprehensive work is done. Not that I would disagree with this practice, to the contrary, from some prospective it makes a lot of sense to me. I wonder what best practices everybody follows: do you tolerate two reboots separated by few days, or you wait till final kernel update comes, and reboot only once then? Thanks a lot for your insights! Valeri ++++++++++++++++++++++++++++++++++++++++ Valeri Galtsev Sr System Administrator Department of Astronomy and Astrophysics Kavli Institute for Cosmological Physics University of Chicago Phone: 773-702-4247 ++++++++++++++++++++++++++++++++++++++++

2 2

All Samba shares suddenly becoming read only
by Gary Stainburn 27 Feb '17

27 Feb '17

I have a Centos 7 server – ZEPPO - which I use for file sharing. The clients are all Win7 PC's and I use Samba to serve the files. It has been working fine ever since I put it live late last year. Now, all of a sudden, all files are read-only. I recently added a USB WiFi dongle to give the server a presence on the WiFi VLAN. Using this I am able to provide an Air Print service for our mobile devices. For some reason this made the server unavailable to some clients, including a Fedora box (GROUCHO) that does host health checks using ping. What I found was that if the WiFi was up on Zeppo (10.6.103.1/24) then Groucho (10.6.1.1/24) could not ping Zeppo's LAN address 10.6.1.101/24. Groucho only has the LAN and has no WiFi. However, Zeppo could still ping groucho. If the WiFi was down on Zeppo then Groucho could ping Zeppo. Also, the clients could access the file shares. Although I didn't get to the bottom of it, I did make it go away by * removing an obsolete alias on the LAN interface 10.6.1.3/24 * changed the WiFi from DHCP to manual, although still with the same settings. Once I'd done this, I was happy until the users started telling me that they could only open documents as read-only. On testing this I found that all of the Samba shares are now read only. I can't even create a new empty file in an existing folder. I have not changed any file permissions on the server, nor have I changed and Samba config. I've had a look in /var/log/samba and can't see anything. The log.smbd and log.nmbd don't show anyting relating to this. The log.10.6.5.2 file is empty I've tried disabling selinux as a test but that made no difference. The samba user = the linux user and if I ssh in as that user I can create files and folders. Can anyone suggest what I need to do next to stop these shares being read only. Ta -- https://fundraise.cancerresearchuk.org/page/garys-march-march

1 0

CentOS-announce Digest, Vol 144, Issue 9
by centos-announce-request＠centos.org 26 Feb '17

26 Feb '17

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2017:0323 Important CentOS 5 kernel Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Sat, 25 Feb 2017 15:02:03 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2017:0323 Important CentOS 5 kernel Security Update Message-ID: <20170225150203.GA30594(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2017:0323 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2017-0323.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 019a5946e25b89c2d0ee356e588f0fa0899a8e0742d7fb54ff075c8ba2085d41 kernel-2.6.18-419.el5.i686.rpm 04999d388f09b47faad898788ddb48706ae83e941ba8d4f8b3d0922b0d757937 kernel-debug-2.6.18-419.el5.i686.rpm bce1ad740f84730eac3e6ad8153c4748e45485fea938ddcb512c8fab5200bec6 kernel-debug-devel-2.6.18-419.el5.i686.rpm 2029c432d99fb27611918b74a087d4280b13d5b08a80211b30fb7d61ee6b427f kernel-devel-2.6.18-419.el5.i686.rpm 44c69f8dc8622d48b018ca658b6ffebb2ab9a4bde2e2ab996bf55c8395c32bb4 kernel-doc-2.6.18-419.el5.noarch.rpm f50709be8b7678576e31dd4f0be48a56373ea9dff41de1518f1f1a72344487a4 kernel-headers-2.6.18-419.el5.i386.rpm a95b656d0a233a9c65b503524ae9153052ca16f1932140e7d8bd0a5a9d020969 kernel-PAE-2.6.18-419.el5.i686.rpm 913b066902e9a694cd8dacfed10cccad3828ea117705df72b31c44e0174f534e kernel-PAE-devel-2.6.18-419.el5.i686.rpm 1df361995538b14778060829f9bdc2506b91fe56135570e53f0b6c8d348998ab kernel-xen-2.6.18-419.el5.i686.rpm 626c4071b7811031ed605c17e54fd1185765d38d2912bf377a23d3486836e729 kernel-xen-devel-2.6.18-419.el5.i686.rpm x86_64: 6c4558babe0b37022c1999231ad64116767001ef414bd8b65d66918a56dcaed1 kernel-2.6.18-419.el5.x86_64.rpm e7dec9fb687ef00bb29351361e7e5365b324046a9223f8fe363a809f6344c597 kernel-debug-2.6.18-419.el5.x86_64.rpm 687f5550c5a35526c37f213f303b635078e9cdfa13534a84f7be88d2d37b5954 kernel-debug-devel-2.6.18-419.el5.x86_64.rpm dd57d4ca8c328a0701a4bdf2c571ba16d28cfadfda4d7329a1d89b74d2a45f1b kernel-devel-2.6.18-419.el5.x86_64.rpm 44c69f8dc8622d48b018ca658b6ffebb2ab9a4bde2e2ab996bf55c8395c32bb4 kernel-doc-2.6.18-419.el5.noarch.rpm ab01f7fe8a199ec0debbbe8ee672eb3d9ad7191305b75d5b4afdff957b15f569 kernel-headers-2.6.18-419.el5.x86_64.rpm f846028137b73dc155e20b78ad9726ed54936ca4953743cad43d35907229962a kernel-xen-2.6.18-419.el5.x86_64.rpm 1f37799de9f2a3910ce1ca37be50b325943e9842051a633e6ba1d041ac784dd9 kernel-xen-devel-2.6.18-419.el5.x86_64.rpm Source: c37156be43391a11612a558e2b9732fdf37da0002d0eeb0d4aecd57bcd497cce kernel-2.6.18-419.el5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 144, Issue 9 ***********************************************

1 0

RHEL 8 speculation ???
by Alice Wonder 25 Feb '17

25 Feb '17

Is there any blog that has information on a potential RHEL 8 release date? boost in 7 is now too old for some things, in addition to gcc. There are solutions in 7 to those issues but it's starting to feel like 6 felt shortly before 7 came out, so I wonder if it is getting near to time. I'm working on a major project bitcoin related and it would be frustrating to deploy a bunch of CentOS 7 virtual machines only to have 8 come out fairly soon afterwards.

5 5

Problem loading the VM after reboots.
by Subscriber 25 Feb '17

25 Feb '17

I had a strange problem. After restarting the VM can not always run. The last line in the console (virsh console): init: Re-executing /sbin/init Please stand by while rebooting the system... Restarting system. machine restart At this time, one of the CPU core is loaded 100% (qemu-kvm process, top command) %Cpu7 : 41.8 us, 57.6 sy, 0.0 ni, 0.6 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st # free total used free shared buff/cache available Mem: 8009692 377744 1164076 9392 6467872 7299800 Swap: 2097148 0 2097148 This behavior only when the virtual machine CentOS 6.8 and HV CentOS 7.3.1116. Unsuccessful restart may occur after 2 successful, and maybe after 5 successful, and maybe on the first reboot. No clear pattern of a problem I have not seen. Tested different VM. Here's how behaved virtual machine if its reboot through virsh reboot: virsh # reboot test1 Domain test1 is being rebooted virsh # reboot test1 Domain test1 is being rebooted virsh # destroy test1 Domain test1 destroyed virsh # start test1 Domain test1 started virsh # reboot test1 Domain test1 is being rebooted virsh # reboot test1 Domain test1 is being rebooted virsh # destroy test1 Domain test1 destroyed virsh # start test1 Domain test1 started virsh # reboot test1 Domain test1 is being rebooted virsh # reboot test1 Domain test1 is being rebooted virsh # reboot test1 Domain test1 is being rebooted virsh # reboot test1 Domain test1 is being rebooted virsh # reboot test1 Domain test1 is being rebooted virsh # reboot test1 Domain test1 is being rebooted virsh # reboot test1 Domain test1 is being rebooted virsh # destroy test1 Domain test1 destroyed If the VM shutdown and then start, the problem does not occur. The problem does not occur if the VM CentOS 7.3.1611 (10 successful reboots of 10) or if the VM Windows Server 2008 R2 (10 successful reboots of 10). If the VM CentOS 6.8 and HV CentOS 6.8 the problem does not occur. First HV is: CentOS 7.3.1611 with 3.10.0-514.6.2.el7.x86_64 and 3.10.0-514.6.1.el7.x86_64 qemu-kvm-ev.x86_64 10:2.6.0-28.el7_3.3.1 libvirt.x86_64 2.0.0-10.el7_3.4 Kernel module: kvm_intel 170181 kvm 554609 Second HV is: CentOS 7.3.1611 with 3.10.0-514.6.2.el7.x86_64 qemu-kvm.x86_64 10:1.5.3-126.el7_3.3 libvirt.x86_64 2.0.0-10.el7_3.4 Kernel module: kvm_intel 170181 kvm 554609

1 0

Would this be considered a packaging bug?
by Alice Wonder 25 Feb '17

25 Feb '17

https://koji.fedoraproject.org/koji/buildinfo?buildID=861692 The source RPM there uses %if 0%{?rhel} # not upstreamed Patch500: 0001-disable-libe-book-support.patch Patch501: 0001-fix-build-of-bundled-libzmf-with-boost-1.56.patch Patch502: 0001-allow-to-build-bundled-libzmf-on-aarch64.patch Patch503: 0001-impl.-missing-function.patch %endif (and more than just those) resulting in those patches not being included in the src.rpm because the rpm was not built on rhel/centos. My understanding was that platform specific patches were suppose to have the %if macro where the patch is applied, but should not be where the source for the patch is defined. Been a long time since I was a fedora packager so I don't know what current packaging guidelines are, but that just seems wrong. Is it wrong?

3 5

CentOS-announce Digest, Vol 144, Issue 8
by centos-announce-request＠centos.org 25 Feb '17

25 Feb '17

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2017:0307 Moderate CentOS 6 kernel Security Update (Johnny Hughes) 2. CEBA-2017:0302 CentOS 6 ding-libs BugFix Update (Johnny Hughes) 3. CEBA-2017:0313 CentOS 6 initscripts BugFix Update (Johnny Hughes) 4. CEBA-2017:0312 CentOS 6 lldpad BugFix Update (Johnny Hughes) 5. CEBA-2017:0306 CentOS 6 selinux-policy BugFix Update (Johnny Hughes) 6. CEBA-2017:0304 CentOS 6 gnome-settings-daemon BugFix Update (Johnny Hughes) 7. CESA-2017:0309 Important CentOS 6 qemu-kvm Security Update (Johnny Hughes) 8. CEBA-2017:0302 CentOS 6 sssd BugFix Update (Johnny Hughes) 9. CEBA-2017:0308 CentOS 6 gpxe BugFix Update (Johnny Hughes) 10. CEBA-2017:0305 CentOS 6 kexec-tools BugFix Update (Johnny Hughes) 11. CEEA-2017:0310 CentOS 6 resource-agents Enhancement Update (Johnny Hughes) 12. CEBA-2017:0311 CentOS 6 util-linux-ng BugFix Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Fri, 24 Feb 2017 20:45:23 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2017:0307 Moderate CentOS 6 kernel Security Update Message-ID: <20170224204523.GA44950(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2017:0307 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2017-0307.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 4b19afbec2ec90db7ab39adb3b3caa40d0ce9d49897b613bdd20e77714f1be21 kernel-2.6.32-642.15.1.el6.i686.rpm c784e1a7a1339f05c0d0df7fe6bac6fbb0b7a480a1af6ad24116a41b98e38eb6 kernel-abi-whitelists-2.6.32-642.15.1.el6.noarch.rpm 2b8e6351259af887492c593fd5f608983fa79f9c84fe2023456493d389b9dc41 kernel-debug-2.6.32-642.15.1.el6.i686.rpm db434c849f711e6800b56bf3ddc4f77c71a67648e14ec149733bd8b2527d65ca kernel-debug-devel-2.6.32-642.15.1.el6.i686.rpm 0c6a706bbf6b167be4fecf464291ebfbc01d1b4981f55e43a8ed74dd32b8fb11 kernel-devel-2.6.32-642.15.1.el6.i686.rpm 118d0af31dc23edff429fbeeadc65e9d13bd5e639a2b0a9aaeacbfd578a1b878 kernel-doc-2.6.32-642.15.1.el6.noarch.rpm 177d9718e7126987080c204c791f455c784e298dc76b06a69c333b77d831fb47 kernel-firmware-2.6.32-642.15.1.el6.noarch.rpm 5052e87aacf81ae123a87a0e5002db149a31f27034b857b1654639204ba8dd23 kernel-headers-2.6.32-642.15.1.el6.i686.rpm 772129d87b1914d0529b57da4b7271b2fdb70c389ec9c7cc2ce51c694ded0846 perf-2.6.32-642.15.1.el6.i686.rpm fd73990afe6d4f3a33de5e1d3ebfb77582017513235a95ae3cc933d72e892da9 python-perf-2.6.32-642.15.1.el6.i686.rpm x86_64: 644ddd5f661a1ec7674edb21a55fe7187dc418e7ef900fe862df79e2fb6b8af0 kernel-2.6.32-642.15.1.el6.x86_64.rpm c784e1a7a1339f05c0d0df7fe6bac6fbb0b7a480a1af6ad24116a41b98e38eb6 kernel-abi-whitelists-2.6.32-642.15.1.el6.noarch.rpm f27b11a0b8e127f44e7e11e6cab0d48c463d68616cb48337a936052e5ac62874 kernel-debug-2.6.32-642.15.1.el6.x86_64.rpm db434c849f711e6800b56bf3ddc4f77c71a67648e14ec149733bd8b2527d65ca kernel-debug-devel-2.6.32-642.15.1.el6.i686.rpm c572e0950b1960586d541ce30e2ea0f86b49cbb9f5d51170cd7a5a481ca0617e kernel-debug-devel-2.6.32-642.15.1.el6.x86_64.rpm a8795311c6c552044450f11a810c285a1c05d6175cb8db313d092ef063ce2673 kernel-devel-2.6.32-642.15.1.el6.x86_64.rpm 118d0af31dc23edff429fbeeadc65e9d13bd5e639a2b0a9aaeacbfd578a1b878 kernel-doc-2.6.32-642.15.1.el6.noarch.rpm 177d9718e7126987080c204c791f455c784e298dc76b06a69c333b77d831fb47 kernel-firmware-2.6.32-642.15.1.el6.noarch.rpm c54cca97f5e22b0ceaa0c06fe49cb6027dc5a4d8bc5131fb516240a1877608cd kernel-headers-2.6.32-642.15.1.el6.x86_64.rpm 2ee22bfd1cef9df4bc99b20c3c205725d9d38a6fbb4063c9cb96007db753efc1 perf-2.6.32-642.15.1.el6.x86_64.rpm b8a6e1441a00e961340514f0d5db8faec46c914a041a5eab2d2adf896cc5c79f python-perf-2.6.32-642.15.1.el6.x86_64.rpm Source: aab44f74bf793af1559f121a1081a455bce337b0dac04cc504bff37bad40a224 kernel-2.6.32-642.15.1.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Fri, 24 Feb 2017 20:47:24 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2017:0302 CentOS 6 ding-libs BugFix Update Message-ID: <20170224204724.GA45512(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2017:0302 Upstream details at : https://rhn.redhat.com/errata/RHBA-2017-0302.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 6b6b750c5843f85219890391c805bf2dee76e254549abf23978aad260571f7e9 libbasicobjects-0.1.1-11.el6_8.1.i686.rpm 3f8b660e3a9e8dd1940d4f353234cc096e51da9bf5b00e4f2ebb4a4793036dc0 libbasicobjects-devel-0.1.1-11.el6_8.1.i686.rpm f296af090230380058a024a45887cee1844ef71f8277fb408302d62bd17fce0c libcollection-0.6.2-11.el6_8.1.i686.rpm f24a2807b8f91805859a069f82a0f5aea58599ab70fbe4087532642e26cf781d libcollection-devel-0.6.2-11.el6_8.1.i686.rpm d930824e4f58ed9bd1aa10c677280cfb0bb758cb1d9687c3799ac28b9435dd18 libdhash-0.4.3-11.el6_8.1.i686.rpm 3f755c2dce44561d1ff5ab8c0b9762ca452441dc8e1a1bd354a4efb0b5281b7f libdhash-devel-0.4.3-11.el6_8.1.i686.rpm 9abef3517282f4dfb6330a43cf1692225bec055a56cedc7cad2785a8b4ddd14f libini_config-1.1.0-11.el6_8.1.i686.rpm cbf1f9462a9f6e009f42517178c70f57b237bd73cd925deeae70da3777756ab0 libini_config-devel-1.1.0-11.el6_8.1.i686.rpm ccf03900c90580479a5de765fcee16fcdc6a7298c56dbe2bab316ee203754375 libpath_utils-0.2.1-11.el6_8.1.i686.rpm e8f27f432bd68ca84f2c708018d056c69c71324d089501e4b5e0c4ba9aeae892 libpath_utils-devel-0.2.1-11.el6_8.1.i686.rpm 623f8220facbef9545985aa581b70ac347062a8a7a985f4df6faef014e9a04aa libref_array-0.1.4-11.el6_8.1.i686.rpm 7ce1122ced92b0374cb0943c252cefce796d9734901bee22dd084c41f1ed488f libref_array-devel-0.1.4-11.el6_8.1.i686.rpm x86_64: 6b6b750c5843f85219890391c805bf2dee76e254549abf23978aad260571f7e9 libbasicobjects-0.1.1-11.el6_8.1.i686.rpm 531b6cd8b4bb10cce6e3a8a70acbdbc0ea3f03a374451ec558ac462460c1aaf2 libbasicobjects-0.1.1-11.el6_8.1.x86_64.rpm 3f8b660e3a9e8dd1940d4f353234cc096e51da9bf5b00e4f2ebb4a4793036dc0 libbasicobjects-devel-0.1.1-11.el6_8.1.i686.rpm 3f32973123fed2a557c63e0d7a69b0cf832391b88d0eb5d508b40bcb7f173655 libbasicobjects-devel-0.1.1-11.el6_8.1.x86_64.rpm f296af090230380058a024a45887cee1844ef71f8277fb408302d62bd17fce0c libcollection-0.6.2-11.el6_8.1.i686.rpm 5d14203de5b0fed0bee28b6f9bf9ff0b6b977d390d5e37d0ef7b0e7d919e8ff3 libcollection-0.6.2-11.el6_8.1.x86_64.rpm f24a2807b8f91805859a069f82a0f5aea58599ab70fbe4087532642e26cf781d libcollection-devel-0.6.2-11.el6_8.1.i686.rpm e0ff79df8a23947e32005b63d2fdc47848295a500ea7b1e60fcf1abb2ea95af6 libcollection-devel-0.6.2-11.el6_8.1.x86_64.rpm d930824e4f58ed9bd1aa10c677280cfb0bb758cb1d9687c3799ac28b9435dd18 libdhash-0.4.3-11.el6_8.1.i686.rpm e14af19955db45aeed7dffef1d39eaea33937bb4f184a32bdd2b9e6a989ff92a libdhash-0.4.3-11.el6_8.1.x86_64.rpm 3f755c2dce44561d1ff5ab8c0b9762ca452441dc8e1a1bd354a4efb0b5281b7f libdhash-devel-0.4.3-11.el6_8.1.i686.rpm b947cd7fd8b5a8a2e5acf417d4a7f9537b5048aa7c15d3efcf06acdb48411263 libdhash-devel-0.4.3-11.el6_8.1.x86_64.rpm 9abef3517282f4dfb6330a43cf1692225bec055a56cedc7cad2785a8b4ddd14f libini_config-1.1.0-11.el6_8.1.i686.rpm 551aac4a221590aa7b4cfd9c1ec00aeede52834f4502d3f19ca5df494e5d651b libini_config-1.1.0-11.el6_8.1.x86_64.rpm cbf1f9462a9f6e009f42517178c70f57b237bd73cd925deeae70da3777756ab0 libini_config-devel-1.1.0-11.el6_8.1.i686.rpm 3d7c807be17a743ad32fd26e717c0d56b0d0b450f379fc3db8a38e212f6b34f6 libini_config-devel-1.1.0-11.el6_8.1.x86_64.rpm ccf03900c90580479a5de765fcee16fcdc6a7298c56dbe2bab316ee203754375 libpath_utils-0.2.1-11.el6_8.1.i686.rpm cb0ab65b281ebf272916209c57eaec3fec43aff12f1b20bd24091767ccf165a1 libpath_utils-0.2.1-11.el6_8.1.x86_64.rpm e8f27f432bd68ca84f2c708018d056c69c71324d089501e4b5e0c4ba9aeae892 libpath_utils-devel-0.2.1-11.el6_8.1.i686.rpm 7e4a5c5416b9bbf238aa3202639bd623ac627dee41fa2542c3d67e2fd3cdc3c3 libpath_utils-devel-0.2.1-11.el6_8.1.x86_64.rpm 623f8220facbef9545985aa581b70ac347062a8a7a985f4df6faef014e9a04aa libref_array-0.1.4-11.el6_8.1.i686.rpm 766feae13356a0cff88a2763164a968e118bcd4f03706e96605f77ed09669565 libref_array-0.1.4-11.el6_8.1.x86_64.rpm 7ce1122ced92b0374cb0943c252cefce796d9734901bee22dd084c41f1ed488f libref_array-devel-0.1.4-11.el6_8.1.i686.rpm a5a185848a6551acdca74f4ad97e2f34f33a539b5c2e310519f6fea5d52ad6b1 libref_array-devel-0.1.4-11.el6_8.1.x86_64.rpm Source: d256d1ce71b8300c87a579fb78fa30db184ff891a66090defce4f657a81c3e7b ding-libs-0.4.0-11.el6_8.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 3 Date: Fri, 24 Feb 2017 20:48:57 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2017:0313 CentOS 6 initscripts BugFix Update Message-ID: <20170224204857.GA45746(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2017:0313 Upstream details at : https://rhn.redhat.com/errata/RHBA-2017-0313.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: a4dc73b4344cda39e8d23db767f4cc1890820c7b9b4cc2f36b3e655b626c1190 debugmode-9.03.53-1.el6.centos.2.i686.rpm bc6e39e605061706e774b72ccf7e0c2679d05d335820cdcbbb382357762eefc3 initscripts-9.03.53-1.el6.centos.2.i686.rpm x86_64: 04e2f52ff16ed2400830eaa9c642c8c32aeac3e1d1c5c3d7d36a9b6e823aafbc debugmode-9.03.53-1.el6.centos.2.x86_64.rpm 3c1beb72dfc7648f275057f5ed34652ad6f64c714138c8cf598e0ad18b0267d5 initscripts-9.03.53-1.el6.centos.2.x86_64.rpm Source: 84883a22a0c786c91378108202145ee99028fe08afa6cfea86286836ee0d0ac2 initscripts-9.03.53-1.el6.centos.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 4 Date: Fri, 24 Feb 2017 20:49:37 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2017:0312 CentOS 6 lldpad BugFix Update Message-ID: <20170224204937.GA45997(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2017:0312 Upstream details at : https://rhn.redhat.com/errata/RHBA-2017-0312.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 6d5248f824f89d23ff69f19f236fe666f57e28018542321ddc81a43f2ecf13c5 lldpad-0.9.46-10.el6_8.i686.rpm 89dfd0220dae993687c2f4d259648056fb5cd8b8719161aa89f3c44ded4c5a3e lldpad-devel-0.9.46-10.el6_8.i686.rpm 617e904a4fb105a55347298831e8af9f80112ef187b0f61befc17ad4288d0559 lldpad-libs-0.9.46-10.el6_8.i686.rpm x86_64: 6dbb3c8a0883af0b033a912641c6536ad3d5c22b77c0abaa0bb03644668365ed lldpad-0.9.46-10.el6_8.x86_64.rpm 89dfd0220dae993687c2f4d259648056fb5cd8b8719161aa89f3c44ded4c5a3e lldpad-devel-0.9.46-10.el6_8.i686.rpm 30fab1de2a1b802a3bdc9d7ad3a06d9a8672ecbbabb3b0f035da09270b9f267e lldpad-devel-0.9.46-10.el6_8.x86_64.rpm 617e904a4fb105a55347298831e8af9f80112ef187b0f61befc17ad4288d0559 lldpad-libs-0.9.46-10.el6_8.i686.rpm 53f939e6e4a38815dcef987e379962c1ed2850dbe1026b43664b08ff7bd9f8ed lldpad-libs-0.9.46-10.el6_8.x86_64.rpm Source: a0529a7b4dadc46e3b9be78d05512c643509d1648b762bb582b51a74169d05a1 lldpad-0.9.46-10.el6_8.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 5 Date: Fri, 24 Feb 2017 20:50:08 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2017:0306 CentOS 6 selinux-policy BugFix Update Message-ID: <20170224205008.GA46277(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2017:0306 Upstream details at : https://rhn.redhat.com/errata/RHBA-2017-0306.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 58489f2527a8fc27f98c161d4beebb1f0db46e35f84853193fcb0984b30bc86b selinux-policy-3.7.19-292.el6_8.3.noarch.rpm 929e34f462a5986532a7abb4f8ef6ec2deb15379048c6c9bdb5fff467dd67a92 selinux-policy-doc-3.7.19-292.el6_8.3.noarch.rpm 6e00d154ad48c2571982f56b22bb1ba8f0724f58435f999a8ba7a344d33b945a selinux-policy-minimum-3.7.19-292.el6_8.3.noarch.rpm 8695f2d588486baf8ebc2c46274b9c5fbe5af562d9b44e34d6f1517ad98a3c42 selinux-policy-mls-3.7.19-292.el6_8.3.noarch.rpm 257b482a33961ae58d60744da0412ffcd8c147eb33af46a83babd8263478d962 selinux-policy-targeted-3.7.19-292.el6_8.3.noarch.rpm x86_64: 58489f2527a8fc27f98c161d4beebb1f0db46e35f84853193fcb0984b30bc86b selinux-policy-3.7.19-292.el6_8.3.noarch.rpm 929e34f462a5986532a7abb4f8ef6ec2deb15379048c6c9bdb5fff467dd67a92 selinux-policy-doc-3.7.19-292.el6_8.3.noarch.rpm 6e00d154ad48c2571982f56b22bb1ba8f0724f58435f999a8ba7a344d33b945a selinux-policy-minimum-3.7.19-292.el6_8.3.noarch.rpm 8695f2d588486baf8ebc2c46274b9c5fbe5af562d9b44e34d6f1517ad98a3c42 selinux-policy-mls-3.7.19-292.el6_8.3.noarch.rpm 257b482a33961ae58d60744da0412ffcd8c147eb33af46a83babd8263478d962 selinux-policy-targeted-3.7.19-292.el6_8.3.noarch.rpm Source: 79ba417779c47b19c0f2d8be68b7cc81be5c7d3486d8d0f282d4d0cae603aabd selinux-policy-3.7.19-292.el6_8.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 6 Date: Fri, 24 Feb 2017 20:50:49 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2017:0304 CentOS 6 gnome-settings-daemon BugFix Update Message-ID: <20170224205049.GA46496(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2017:0304 Upstream details at : https://rhn.redhat.com/errata/RHBA-2017-0304.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 23ee2659a7ccfc8ee5ebede452eae2b5f37759b91d5aa6f708e790ec3edd0b47 gnome-settings-daemon-2.28.2-35.el6_8.2.i686.rpm 775e459d9f7ac87b3a4de2d4247a5f880b7a781bb4381ee2f49939e0643033d8 gnome-settings-daemon-devel-2.28.2-35.el6_8.2.i686.rpm x86_64: a0d12e64ab3f38e9f61c4269306aad41eff4f9828e0a0adf5d7f29f1a29808af gnome-settings-daemon-2.28.2-35.el6_8.2.x86_64.rpm 775e459d9f7ac87b3a4de2d4247a5f880b7a781bb4381ee2f49939e0643033d8 gnome-settings-daemon-devel-2.28.2-35.el6_8.2.i686.rpm 0a46dc05ba642b7f79c653bea567f7a74942c89a5ff59414e0583867679b174e gnome-settings-daemon-devel-2.28.2-35.el6_8.2.x86_64.rpm Source: 19ad3e3f798a89d7887f3196a9fa09897111165300851af380819de568ff13fd gnome-settings-daemon-2.28.2-35.el6_8.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 7 Date: Fri, 24 Feb 2017 20:51:12 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2017:0309 Important CentOS 6 qemu-kvm Security Update Message-ID: <20170224205112.GA46708(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2017:0309 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2017-0309.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 7c77c0cbe4a7d431599f70dbc574ddcd4c05d8f107cd53430262fe95b99bef8c qemu-guest-agent-0.12.1.2-2.491.el6_8.6.i686.rpm x86_64: f15663a66bf8712225dc1a5ab3993379e86b3afe57f13f5de4aa3de8dda04861 qemu-guest-agent-0.12.1.2-2.491.el6_8.6.x86_64.rpm be84e86efec3c467a05f3208d3fd3abd3f6d5b94d6efd805c52267669b240cd6 qemu-img-0.12.1.2-2.491.el6_8.6.x86_64.rpm 2bf57cadd87f7fd0e0ee26d1fbff179af8a8615bc9cd389562a479ae8169cbe2 qemu-kvm-0.12.1.2-2.491.el6_8.6.x86_64.rpm 9692f3dbb2376c254a324631b3fbfd44e2de2cfa55621f2e561761737e574d98 qemu-kvm-tools-0.12.1.2-2.491.el6_8.6.x86_64.rpm Source: 456d3c92d14ccd83d3e2e1bb2904aa0e335a4e25a8c1d60608b933b6b373cae2 qemu-kvm-0.12.1.2-2.491.el6_8.6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 8 Date: Fri, 24 Feb 2017 20:51:44 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2017:0302 CentOS 6 sssd BugFix Update Message-ID: <20170224205144.GA47502(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2017:0302 Upstream details at : https://rhn.redhat.com/errata/RHBA-2017-0302.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 62c9102db1c4c156a2d187b9e34bcd225b5fb5a581042aff538fa47b853b9456 libipa_hbac-1.13.3-22.el6_8.6.i686.rpm 795349d4ad703bf8d76047557c1cfa9e4e889f2fcd4e444f00ec89994504ccc1 libipa_hbac-devel-1.13.3-22.el6_8.6.i686.rpm d82ce67063eddffa99e8b7811bcb844509cb043cea6c696cf67bf1f31d8a8954 libsss_idmap-1.13.3-22.el6_8.6.i686.rpm d7286233098526f409b1156d9dbd2d4b1889a007e8e3f90ddab4adfaaaef818d libsss_idmap-devel-1.13.3-22.el6_8.6.i686.rpm d847cb55d231b64e38166916f06ffad8969e56f9931c75de8258eb33fc241203 libsss_nss_idmap-1.13.3-22.el6_8.6.i686.rpm 68bec4ebbc4c6f6ac76d0f9394184807139344ec653409e3e2fd3e5ab993675e libsss_nss_idmap-devel-1.13.3-22.el6_8.6.i686.rpm 8d2259a2e3368482451e88176c19a4629ab51fdadc995b473690c6b04f1fe140 libsss_simpleifp-1.13.3-22.el6_8.6.i686.rpm db2b27c5249f65b0fe417717c14707033515d124c4c595cc9bce6218e651a279 libsss_simpleifp-devel-1.13.3-22.el6_8.6.i686.rpm b6f3c07bffa7ab293396d3371b131f9a5fbe6196574dd2717f071dc7f112bb6c python-libipa_hbac-1.13.3-22.el6_8.6.i686.rpm 01519ae09ed5356f8b48325d11186d68c6ef1d5cca02980f741963c3d07dcc8e python-libsss_nss_idmap-1.13.3-22.el6_8.6.i686.rpm c857e95493909c7e88cb184dca0184f00c7609ef89961c8817f029c4c0fbdb6c python-sss-1.13.3-22.el6_8.6.i686.rpm e9ba0634c9403c08197f1315cd07b22de6066ef15cb2b12dae96fb2a12a55962 python-sssdconfig-1.13.3-22.el6_8.6.noarch.rpm 87d2973d7e87e9d0e12ace828d53aeefd29652e3438cfb234af550ae0d78f807 python-sss-murmur-1.13.3-22.el6_8.6.i686.rpm 4f971eb8df6c28ce9e6fbcdac95574769857e3e47c504134edad2d99290c5dfb sssd-1.13.3-22.el6_8.6.i686.rpm 433a50cd907976f1cd313f1ef5b7cfad9fdca7c712d83c0d52b865fbeb999864 sssd-ad-1.13.3-22.el6_8.6.i686.rpm ef0b0132ca489dd4c0fd1e58a3b9e91adb8b43ebaf958e7eda16e29e90b76a66 sssd-client-1.13.3-22.el6_8.6.i686.rpm 2d0f9060a64ee02603fa2d958003e8f514294c9883b8f09346033eb683c1295f sssd-common-1.13.3-22.el6_8.6.i686.rpm e201dcbc8b1e37cb73d30ac619ad3860cc2c2c94c1703d0640a8cf36fdee859e sssd-common-pac-1.13.3-22.el6_8.6.i686.rpm 5a4cf420ce639a4869151973f825af78e1ae7d6196edc069da00629316e99753 sssd-dbus-1.13.3-22.el6_8.6.i686.rpm 927383bbc69451a7556ec30c792a25ce035aa46953ffa67080312e257cd53cf6 sssd-ipa-1.13.3-22.el6_8.6.i686.rpm 5cdcf155892a3702c1da4d4c5bf1b584e6d50cc705dfef587e5410ae381b0e15 sssd-krb5-1.13.3-22.el6_8.6.i686.rpm e4ac1c2f71c01f42c88e12c36ff803076a36a1712bc91e3ef2367a895aa518c1 sssd-krb5-common-1.13.3-22.el6_8.6.i686.rpm f499422d93e8699f184a89903668835293353d837d7329b84bf1d0a4bdd7afea sssd-ldap-1.13.3-22.el6_8.6.i686.rpm 6a4fc61b2b5eb747aea5a35d10e314c11524ec9331a8182f372b72d90a6e3037 sssd-proxy-1.13.3-22.el6_8.6.i686.rpm dd071425ff201bc19186ac5669c5762f1fd5b942599768fcd76044c8521e4dda sssd-tools-1.13.3-22.el6_8.6.i686.rpm x86_64: 62c9102db1c4c156a2d187b9e34bcd225b5fb5a581042aff538fa47b853b9456 libipa_hbac-1.13.3-22.el6_8.6.i686.rpm 711196e557181b9f011b373d2b7851d05c89d0cdb96932dd821229ce66fd1f40 libipa_hbac-1.13.3-22.el6_8.6.x86_64.rpm 795349d4ad703bf8d76047557c1cfa9e4e889f2fcd4e444f00ec89994504ccc1 libipa_hbac-devel-1.13.3-22.el6_8.6.i686.rpm 5c728060147a38366c4a22bede00673937772e0ab7adef4ed96647380dd810cc libipa_hbac-devel-1.13.3-22.el6_8.6.x86_64.rpm d82ce67063eddffa99e8b7811bcb844509cb043cea6c696cf67bf1f31d8a8954 libsss_idmap-1.13.3-22.el6_8.6.i686.rpm b527e5c6aa7ab482f2fb8cd860e0d91c9ac3126f42ee61e8c9d4e4e981711182 libsss_idmap-1.13.3-22.el6_8.6.x86_64.rpm d7286233098526f409b1156d9dbd2d4b1889a007e8e3f90ddab4adfaaaef818d libsss_idmap-devel-1.13.3-22.el6_8.6.i686.rpm 4167144b8a76b408877bfa6ac342b6854d593b1a115428e96128d987e25146ee libsss_idmap-devel-1.13.3-22.el6_8.6.x86_64.rpm d847cb55d231b64e38166916f06ffad8969e56f9931c75de8258eb33fc241203 libsss_nss_idmap-1.13.3-22.el6_8.6.i686.rpm 2bf6ac364571c8d4e5560ce0c07d79348cc6035aa961377b7f8f4fac6e87a251 libsss_nss_idmap-1.13.3-22.el6_8.6.x86_64.rpm 68bec4ebbc4c6f6ac76d0f9394184807139344ec653409e3e2fd3e5ab993675e libsss_nss_idmap-devel-1.13.3-22.el6_8.6.i686.rpm aec154244d882399b50387bde9b36818a32dcd3a66be620860bccdf75e6704d3 libsss_nss_idmap-devel-1.13.3-22.el6_8.6.x86_64.rpm 8d2259a2e3368482451e88176c19a4629ab51fdadc995b473690c6b04f1fe140 libsss_simpleifp-1.13.3-22.el6_8.6.i686.rpm 4225c873fa21235046e97b3ada701c1b305252ddaa6a9a5cdebbfd603c053d4d libsss_simpleifp-1.13.3-22.el6_8.6.x86_64.rpm db2b27c5249f65b0fe417717c14707033515d124c4c595cc9bce6218e651a279 libsss_simpleifp-devel-1.13.3-22.el6_8.6.i686.rpm c1b3631c6fd036ba1697147db9b1726ef8530b35043cf9dd89e2c946e4c8094c libsss_simpleifp-devel-1.13.3-22.el6_8.6.x86_64.rpm 9dbbf8a5055fcad18015df1c62efc19f95e97b6b9bd6d017022582b95512382a python-libipa_hbac-1.13.3-22.el6_8.6.x86_64.rpm 3647cc6174ccb784b05ea69e4d8c09ea996d5cfb564d31399e804fc9a7ad1f3f python-libsss_nss_idmap-1.13.3-22.el6_8.6.x86_64.rpm 2cb8f71dafd44563702b3011ba18f4f6e102f78b264b2df4efd72e584c83b7b5 python-sss-1.13.3-22.el6_8.6.x86_64.rpm e9ba0634c9403c08197f1315cd07b22de6066ef15cb2b12dae96fb2a12a55962 python-sssdconfig-1.13.3-22.el6_8.6.noarch.rpm c6d9ec2cc09e1038dba712e577d90f6e079c46f0365d79c05749a70c8d2a6c94 python-sss-murmur-1.13.3-22.el6_8.6.x86_64.rpm 113e656584ec002fc2a9035ddb5e6d2da00e9a60f9b08e2049595326234bf674 sssd-1.13.3-22.el6_8.6.x86_64.rpm 3b731c4ebabe733bf74a02f1494552fa8f7b4ee1ebb9aec7a1aa279f23644001 sssd-ad-1.13.3-22.el6_8.6.x86_64.rpm ef0b0132ca489dd4c0fd1e58a3b9e91adb8b43ebaf958e7eda16e29e90b76a66 sssd-client-1.13.3-22.el6_8.6.i686.rpm bd87fe8d9d62cdfabee2ef250658a76381cfe5bc6be4fbe7e48c16f44689a57e sssd-client-1.13.3-22.el6_8.6.x86_64.rpm e9d6ddb5143f0bca2908645cac9a0d6af32789c8d7ac600df7883d42a393170c sssd-common-1.13.3-22.el6_8.6.x86_64.rpm 9255f3c4c410715eefa657469556fae7bdc47688d56e276158241eff412f9d43 sssd-common-pac-1.13.3-22.el6_8.6.x86_64.rpm cb723ceb3b5a60780c2b1ed4a1d23d5ba3201a86eccf4782a755bc6eea7d28bb sssd-dbus-1.13.3-22.el6_8.6.x86_64.rpm 00cfadd83e464c6181ae3bd5ab1d5a91a4212b6a979f137323d7f22b33f30409 sssd-ipa-1.13.3-22.el6_8.6.x86_64.rpm c456d343adc252636a815f97cc5898ca7ea43a2d8d19508e0239958dadfde039 sssd-krb5-1.13.3-22.el6_8.6.x86_64.rpm 441d5f8743e514d2d6e62de3ffa3b1967a82d697463a97ac576aa03831f5f9e3 sssd-krb5-common-1.13.3-22.el6_8.6.x86_64.rpm 7b9b41183fa3a9fcfff744fbc82f95a1f69bc8ce7f131b3dd0dde9b1cabc20fd sssd-ldap-1.13.3-22.el6_8.6.x86_64.rpm 3f00003d17e6a8ec41f8602ef9d5a1ccdbad11c3fa9b97937b1b635169be22c9 sssd-proxy-1.13.3-22.el6_8.6.x86_64.rpm 74985bd22272c155c07770b75cf406e9f7080e12dc33e6dbc588990752f3ddcd sssd-tools-1.13.3-22.el6_8.6.x86_64.rpm Source: 34e04e07173ef7df3179a691e246f6e575bb62a8c84939b12055f5a698231dd1 sssd-1.13.3-22.el6_8.6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 9 Date: Fri, 24 Feb 2017 20:52:03 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2017:0308 CentOS 6 gpxe BugFix Update Message-ID: <20170224205203.GA47677(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2017:0308 Upstream details at : https://rhn.redhat.com/errata/RHBA-2017-0308.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 8ea5737d3061d36cde86f01e8113e106dd6891e05d76dba151b7363df7bfb0d3 gpxe-bootimgs-0.9.7-6.15.el6_8.1.noarch.rpm 7f5b05452b6977631eb3a60920c3e900774e84dc5c2194a5849356bb2b913120 gpxe-roms-0.9.7-6.15.el6_8.1.noarch.rpm ef574dd2bde4393008127980e650a5aa7aace51032d1213c445693c1cb7b7fa1 gpxe-roms-qemu-0.9.7-6.15.el6_8.1.noarch.rpm Source: 0081fe92d39aeafd094ea2de75cfe56e381bf1b0c58e3b92a82b8b6626c49fba gpxe-0.9.7-6.15.el6_8.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 10 Date: Fri, 24 Feb 2017 20:52:23 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2017:0305 CentOS 6 kexec-tools BugFix Update Message-ID: <20170224205223.GA47878(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2017:0305 Upstream details at : https://rhn.redhat.com/errata/RHBA-2017-0305.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 955c7829943cadd09c06e20096bbe8d4597a1fdc9559ba9f1db7f5772aa72ac8 kexec-tools-2.0.0-300.el6_8.2.i686.rpm 566810553ab13ea803a21c18986c57c0a124fb15f516702439e1e053b38b63fd kexec-tools-eppic-2.0.0-300.el6_8.2.i686.rpm x86_64: 6837b7debcab082fa8758e36e872c8d6d9dadb17493215cb3681c25d9262f1f5 kexec-tools-2.0.0-300.el6_8.2.x86_64.rpm d29af3a2e559635f134c9c01278b301712b758521a3c3282cdba8d1d14095c7b kexec-tools-eppic-2.0.0-300.el6_8.2.x86_64.rpm Source: 9f33d549357930e15f93910d56ed852a256c64df9015f7473c80ec8c9a8e1822 kexec-tools-2.0.0-300.el6_8.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 11 Date: Fri, 24 Feb 2017 20:53:05 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEEA-2017:0310 CentOS 6 resource-agents Enhancement Update Message-ID: <20170224205305.GA48087(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2017:0310 Upstream details at : https://rhn.redhat.com/errata/RHEA-2017-0310.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 187407669439e621ee34a262edbaf9d9b4782ddc3435609b6e2a3e033affb006 resource-agents-3.9.5-34.el6_8.3.i686.rpm x86_64: dbcc1fc343be3cd0663871dc7fd8983154ee83f421987a4dfe58796b700a7818 resource-agents-3.9.5-34.el6_8.3.x86_64.rpm 41b44e3cb4e3f4208a9fd1351b7c117215a82b56ba4ecbd2b9a9ac2c9f9e93c3 resource-agents-sap-3.9.5-34.el6_8.3.x86_64.rpm 58f8ee5096866f1dd3f02847362c0e1725a06f7e364d34069afd95bad4174fdd resource-agents-sap-hana-3.9.5-34.el6_8.3.x86_64.rpm Source: 74f30e9b5fcce8f3b4459ccf71a6f7d54b360604edbe38a24929ae30cc017ced resource-agents-3.9.5-34.el6_8.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 12 Date: Fri, 24 Feb 2017 20:53:39 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2017:0311 CentOS 6 util-linux-ng BugFix Update Message-ID: <20170224205339.GA48442(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2017:0311 Upstream details at : https://rhn.redhat.com/errata/RHBA-2017-0311.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 78df66ec3c658ca8f040a8c42a907a5bb39efbacdc11fce789677e063622b2cb libblkid-2.17.2-12.24.el6_8.3.i686.rpm 03e11d6f93f057691e0c7aa8e153f543e215b2c209bb07ad89ab4f84489502f7 libblkid-devel-2.17.2-12.24.el6_8.3.i686.rpm 5d2ba5b501b08ff7718d4a3d5f7056805a350cd01db246ae5fecb4b4c59eb5a5 libuuid-2.17.2-12.24.el6_8.3.i686.rpm 60e308971ebccc6c8dc0d9223d8310a34c68efd934c78b957b2edb97e57bd1ad libuuid-devel-2.17.2-12.24.el6_8.3.i686.rpm af767da5cdfdd278d1f8887cae6f3cf3d5ebd1f528da144730af6d9fefe9a261 util-linux-ng-2.17.2-12.24.el6_8.3.i686.rpm f1df7f233b8c571384c17ae56a71091f66a20002ea2e215e669b1a6bd32b30ab uuidd-2.17.2-12.24.el6_8.3.i686.rpm x86_64: 78df66ec3c658ca8f040a8c42a907a5bb39efbacdc11fce789677e063622b2cb libblkid-2.17.2-12.24.el6_8.3.i686.rpm 7e8459258706e8f3ccded7c6cc5f5dbb6abc1dbe65204b529cfaf8cd39888951 libblkid-2.17.2-12.24.el6_8.3.x86_64.rpm 03e11d6f93f057691e0c7aa8e153f543e215b2c209bb07ad89ab4f84489502f7 libblkid-devel-2.17.2-12.24.el6_8.3.i686.rpm 3a18fdae5f74e2fdbf594f0d98d84637769e0851e36fceb832c713c4eea2113e libblkid-devel-2.17.2-12.24.el6_8.3.x86_64.rpm 5d2ba5b501b08ff7718d4a3d5f7056805a350cd01db246ae5fecb4b4c59eb5a5 libuuid-2.17.2-12.24.el6_8.3.i686.rpm 29fa2bb1a748d6e67b226599c0483699268694d1fabba8d784c387f3d46e397a libuuid-2.17.2-12.24.el6_8.3.x86_64.rpm 60e308971ebccc6c8dc0d9223d8310a34c68efd934c78b957b2edb97e57bd1ad libuuid-devel-2.17.2-12.24.el6_8.3.i686.rpm f1442b8dbaf3ba1d12a39689cd67c4027a97b921e5a1ff7e33f6c44dd0c29874 libuuid-devel-2.17.2-12.24.el6_8.3.x86_64.rpm af767da5cdfdd278d1f8887cae6f3cf3d5ebd1f528da144730af6d9fefe9a261 util-linux-ng-2.17.2-12.24.el6_8.3.i686.rpm 917d67bc6f47cb417e33266ab57e4c6d565ccedc3ea598007bd76d776c859fe9 util-linux-ng-2.17.2-12.24.el6_8.3.x86_64.rpm ea667f16240f9fd1ff7c1b98170d36b5edb62b83a72e296bf7fe5bed3ad70f5a uuidd-2.17.2-12.24.el6_8.3.x86_64.rpm Source: 1271c4c00fd780d884c843ac922d5713fbed2c22468aca59c94036e9daf79cab util-linux-ng-2.17.2-12.24.el6_8.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 144, Issue 8 ***********************************************

1 0

mailgraph pages are in German
by Robert Moskowitz 24 Feb '17

24 Feb '17

I was pointed to mailgraph, and it looks kind of interesting. So I installed the rpm, only to find that it comes up in German. The German is hard coded into places like: /usr/share/mailgraph/mailgraph.cgi Anyone know where I can get an English version? thanks

1 0

help with RewriteRule regexp
by Robert Moskowitz 23 Feb '17

23 Feb '17

My regexp skills are somewhere infinitesimally close to zero. I have never really 'gotten' them. That said, I have spent a couple hours already search for help to write a rewriterule that works on a string in the URL. In particular I want success if either of the following were provided: webmail.domain (e.g. webmail.foo.com) server/webmail (e.g. www.foo.com/webmail) And I have not found anything like this, nor do I know even close enough of regexp to recognize something like this in another expression. Thanks for the help.

2 5

Centos7 whatprovides php-imap
by Robert Moskowitz 23 Feb '17

23 Feb '17

Would someone with a Intel Centos7 installation PLEASE find out for me: yum whatprovides php-imap Something is broken in my Centos7-armv7hl install, and I can't figure out what is broken without knowing where it is. Actually the warning I am getting is about php5-imap, but I suspect that in C7 it is just php-imap. thanks

2 2

Problems installing packages from the CD
by Mauricio Tavares 23 Feb '17

23 Feb '17

So I did a minimal install of centos 7 vm guest just to find out it did not install perl. Since as of right now I have no properly functioning network on that machine (different issue; we can talk about that in another post), I went for the next best thing: install CD. I grabbed the CentOS-7-x86_64-Everything-1611.iso CD (around 8GB), attached it to the guest, and mounted it on /mnt. Then I edited the cat /etc/yum.repos.d/CentOS-Media.repo # CentOS-Media.repo # # This repo can be used with mounted DVD media, verify the mount point for # CentOS-7. You can use this repo and yum to install items directly off the # DVD ISO that we release. # # To use this repo, put in your DVD and use it with the other repos too: # yum --enablerepo=c7-media [command] # # or for ONLY the media repo, do this: # # yum --disablerepo=\* --enablerepo=c7-media [command] [c7-media] name=CentOS-$releasever - Media baseurl=file:///mnt/ gpgcheck=1 enabled=0 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7 I then run yum clean all and then decided to look for perl only on the cd repo, i.e. yum --disablerepo=\* --enablerepo=c7-media search perl It gave me back the pcre package, which is already installed. I did check the /mnt.Packages dir and there are plenty of perl-related packages including itself. yum --disablerepo=\* --enablerepo=c7-media list all shows only installed packages, some of which are shown (?) to have been installed from c7-media.

2 2

OT: hardware, IBM 3650 M2 won't power on
by m.roth＠5-cent.us 23 Feb '17

23 Feb '17

I've never seen anything like this. We moved it from the data center yesterday, and this morning I plug it in, and it won't power up. I find a manual for it online, and it says that on plugging it in, wait 3 minutes. The power button will flash 4x/sec, then slow down to once a sec, and at that time you can power it up. Well, it never stops flashing at 4x/sec. I've connected a network cable, wondering if it's in wake-on-lan; I've tried connecting to it via its management port, and *zip*. I'm not going to do, as several folks' posts that I googled (been at that for hours), cut the cable and solder in an on/off switch. I have taken the lid uff, reseated the PSUs, and the cable connecting to the front panel, and nada. Anyone got any ideas? mark

8 16

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss February 2017