Discuss December 2019

discuss@lists.centos.org

89 participants
80 discussions

CentOS-8: firewalld not starting
by Adrian van Bloois 12 Dec '19

12 Dec '19

Hello everyone, When I try to start firewalld in CentOS-8 it refuses with this in the /var/log/firewalld, any suggestions? 2019-12-11 19:11:25 WARNING: ipset not usable, disabling ipset usage in firewall. 2019-12-11 19:11:25 ERROR: No icmptypes found. 2019-12-11 19:11:25 ERROR: Failed to load nf_conntrack module: modprobe: ERROR: could not find module by name='nf_conntrack' modprobe: ERROR: could not insert 'nf_conntrack': Unknown symbol in module, or unknown parameter (see dmesg) modprobe: ERROR: Error running install command for nf_conntrack modprobe: ERROR: could not insert 'nf_conntrack': Operation not permitted 2019-12-11 19:11:25 ERROR: Raising SystemExit in run_server -- Adri P. van Bloois "Elegance is not a dispensable luxury but a factor that decides between success and failure." Edsger W. Dijkstra

2 1

need info for X11 keybindings for CentOS7
by Kay Schenk 11 Dec '19

11 Dec '19

Hello all-- It seems using ctrl-alt-F1 to exit from GUI back to MY OWN SESSION'S command line does not work for me. It does nothing. Is this something that needs to be explicitly enabled? I start GUI using "startx". Also, any info on what to use to get BACK to my X11 session. Discussions seem confusing on this point. Thanks for any help. -- "And in the end, only kindness matters." -- Jewel, "Hands" ______ Kay Schenk

4 6

centos8 :: firewalld active but tables empty
by Adrian Sevcenco 11 Dec '19

11 Dec '19

Hi! I have a minimal installation of centos8 + packages for freeipa as a vbox vm. there is something strange with the firewall rules : [root@ldap ~]# iptables -S -P INPUT ACCEPT -P FORWARD ACCEPT -P OUTPUT ACCEPT [root@ldap ~]# firewall-cmd --get-active-zones public interfaces: enp0s17 [root@ldap ~]# firewall-cmd --state running [root@ldap ~]# firewall-cmd --zone=public --permanent --list-all public target: default icmp-block-inversion: no interfaces: sources: services: cockpit dhcpv6-client dns freeipa-ldap freeipa-ldaps http https ssh ports: 22/tcp 60000/tcp protocols: masquerade: no forward-ports: source-ports: icmp-blocks: rich rules: Does anyone know what is the problem or how can i fix this? Thank you! Adrian

5 6

Re: [CentOS] Unusual question
by Mark (Netbook) 10 Dec '19

10 Dec '19

Hello, Is the Intel Celeron J5005 processor supported on CentOS 6.8. If not, is there a CentOS version which supports this processor. Regards, Mark Woolfson MW Consultancy Ltd Leeds LS18 4LY United Kingdom Tel: +44 113 259 1204 Mob: +44 786 065 2778

3 2

PHP handler for .html files - C7
by Gary Stainburn 10 Dec '19

10 Dec '19

Morning all, I am finally moving some old (F9 thru F17) servers to C7 (Plus PHP7/Pgsql10) boxes. On the old boxes they all had it set so that .htm and .html files were handled by PHP in addition to the normal .php files. This was done with the simple change to: AddHandler php5-script .php .htm .html AddType text/html .php .htm .html in /etc/httpd/conf.d/php.inc. I did the same on my first new server but found that this did not work, and the login.html did not get handled. I then added it to fine filematch so my full php.conf on the new box is: <Files ".user.ini"> <IfModule mod_authz_core.c> Require all denied </IfModule> <IfModule !mod_authz_core.c> Order allow,deny Deny from all Satisfy All </IfModule> </Files> AddType text/html .php .htm .html DirectoryIndex index.php <IfModule mod_php7.c> <FilesMatch \.(php|phar|htm|hml)$> SetHandler application/x-httpd-php </FilesMatch> php_value session.save_handler "files" php_value session.save_path "/var/lib/php/session" php_value soap.wsdl_cache_dir "/var/lib/php/wsdlcache" </IfModule> I done some Googling and have found a number of responses saying that this can not be done, this should not be done, this can be done, and here's how to do it. However I haven't found a response that actually works. I have dozens of sites with hundreds of pages so I really would like to find a solution. Can anyone help?

3 4

Re: [CentOS] What about Mate Desktop on Centos 8?
by H 10 Dec '19

10 Dec '19

On 11/25/2019 11:14 PM, isdtor wrote: >>> Enable and start httpd. Write a build script that builds the rpms in order, transfers them to the local repo, runs createrepo, repeat. mozo needs python 3.5 and I couldn't do that in mock (SCLo rh-python35). >>> >> You kindly offered a working version of Mate 1.20 - does that offer still stand? If so, I am interested in installing it on C 7. > > At this point, that would be a bit painful. I rebuilt the C7 vm here and lost all the rpms, so I'd have to rebuild them from the sources I posted online. For which I'd have to recreate the build script. > > At least those files are still online ... > > There was a recent post to the list where someoen ported the Fedora rpms, does that help you? > I see, that is indeed unfortunate. Although I have been using Linux for some time, I am a complete beginner to compiling etc. Do you have notes left?

4 4

How to fix keymap error in centOS 8
by Ebed 10 Dec '19

10 Dec '19

Hi, I.m using centOS 8 in Compaq Pressario V3737TU which is using touchpad. Everytime i pushed touchpad on/off button, i saw an error in messages log, although the button is functioning well, it switch on and off the touchpad. kernel: atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). kernel: atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. I had tried to enter the following commands in command line but did nothing, #setkeycodes e058 0xd8 #setkeycodes e059 0xd9 How can i fix this issue? Best regards.

1 0

Roundcube does not show emails
by Nicolas Kovacs 09 Dec '19

09 Dec '19

Hi, I installed Roundcube 1.4.1 on a sandbox server running CentOS 7, Postfix and Dovecot, with half a dozen test email accounts. Mail is setup correctly under the hood, e. g. I can access any account via Thunderbird for sending and receiving mail. And SELinux is set to permissive until everything works correctly. I took some notes (in french) on the installation procedure under CentOS : * https://github.com/kikinovak/HOWTOs/blob/master/Roundcube-HOWTO.txt All tests in the installer (including SMTP and IMAP login) are OK. But still, when I login to an account, no emails are showing. The inbox shows up empty, even if it's not. Another malfunction is that I cannot edit any identity. When I click on the user's identity, I get a spinning wheel, and the page does not open. I already have Roundcube 1.4rc1 running on my main workhorse server, it runs nicely. I tried to figure out what I did differently on that machine, but couldn't figure it out so far. I took a peek in the various log files, but found nothing suspect. Or maybe I don't know what to look for. Any suggestions? I'm a bit clueless here and don't even know where to start. Cheers, Niki -- Microlinux - Solutions informatiques durables 7, place de l'église - 30730 Montpezat Site : https://www.microlinux.fr Mail : info(a)microlinux.fr Tél. : 04 66 63 10 32 Mob. : 06 51 80 12 12

2 2

CentOS-announce Digest, Vol 178, Issue 2
by centos-announce-request＠centos.org 09 Dec '19

09 Dec '19

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2019:4106 CentOS 7 kernel BugFix Update (Johnny Hughes) 2. CESA-2019:4024 Important CentOS 7 SDL Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Fri, 6 Dec 2019 23:34:10 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2019:4106 CentOS 7 kernel BugFix Update Message-ID: <20191206233410.GA4860(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2019:4106 Upstream details at : https://access.redhat.com/errata/RHBA-2019:4106 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 7c0f528358d229f5d8a4943732c64c291eb4d622282a67211267f9848771e739 bpftool-3.10.0-1062.9.1.el7.x86_64.rpm 68a58326f03e21a26ad8cfa06d98a66b40d3474cb7a1322d182aa85bd82fdffe kernel-3.10.0-1062.9.1.el7.x86_64.rpm dc08e2ce45e21a16867319de8bcfe07ccd19436238e67e2a14b49113143dfca7 kernel-abi-whitelists-3.10.0-1062.9.1.el7.noarch.rpm e86ddf679897f7c58f1cd7c59deea7c811d8e2b6c2eca45b66d4d72e0a13eb1d kernel-debug-3.10.0-1062.9.1.el7.x86_64.rpm 16ecdbdf1899c9c7fc7749501289afb31ac41cb084d192a1b97704f0a7df6829 kernel-debug-devel-3.10.0-1062.9.1.el7.x86_64.rpm 2b647e1c1b73c38452cf1b7e63ac14616950f09ff71c56a7d0ca6c1859cdfa99 kernel-devel-3.10.0-1062.9.1.el7.x86_64.rpm 3913492dccc72776bdece5a9518ad8393cf1326cb9e8a13b32dde7c2d0459d0c kernel-doc-3.10.0-1062.9.1.el7.noarch.rpm 63e2f48f7e5a96597803e65f03f057095897e7fe810cadfd3a0b7b57755c355f kernel-headers-3.10.0-1062.9.1.el7.x86_64.rpm 0ef3d34fcc37e6d8f6a3307e2480fb4beeb07a006ddd934418d02fbeeda2f8da kernel-tools-3.10.0-1062.9.1.el7.x86_64.rpm 4036170eda34550546b6af42802e317d3ecc700ad04e6475a9b3db96d5571146 kernel-tools-libs-3.10.0-1062.9.1.el7.x86_64.rpm 06a9ce6ac6d15cf2d151044880718433100a26b800f50be65bf0b6687eea0a62 kernel-tools-libs-devel-3.10.0-1062.9.1.el7.x86_64.rpm d94bf5dab81bb51ec6378c4b3a2bd71394610204cabc060786e29b63f30ec090 perf-3.10.0-1062.9.1.el7.x86_64.rpm 8ea59b7f8659cb632658c1ae8670c39a4d3c6bc408d70ec6bb3e18736d72d131 python-perf-3.10.0-1062.9.1.el7.x86_64.rpm Source: 236afc13e45937c5743783b535e69f38b62fb87f28aa22a91dff6da0394586d8 kernel-3.10.0-1062.9.1.el7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Fri, 6 Dec 2019 23:34:45 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2019:4024 Important CentOS 7 SDL Security Update Message-ID: <20191206233445.GA5005(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2019:4024 Important Upstream details at : https://access.redhat.com/errata/RHSA-2019:4024 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: e3e9919525fe486bdd22e798d6ca8111312381f94fd884f2954496ec730d2ee1 SDL-1.2.15-15.el7_7.i686.rpm 85d5a427278e873245663ec50c7b43ac344bc9065b00cd4524eceb1606dde028 SDL-1.2.15-15.el7_7.x86_64.rpm a1000d5515233e0c7df795a5ce8b8195c954944219c6e3c433e1e148565db5d7 SDL-devel-1.2.15-15.el7_7.i686.rpm a5ceebc69680d7c13c5b37e8832e191607a4b78a76494c960299e040d5cdc596 SDL-devel-1.2.15-15.el7_7.x86_64.rpm ec79803f3d0e7c6524813a770440c37e986189a852b182a576c5c103de1bff11 SDL-static-1.2.15-15.el7_7.i686.rpm e4b6bd7edae68323de424e56ceabdaaa3454a29a1903632a54e1543ebab93759 SDL-static-1.2.15-15.el7_7.x86_64.rpm Source: 7ee11ba232b1b2adc95fff9ceebd35c9ccd1153c920f6d19c1e140b9be0b8667 SDL-1.2.15-15.el7_7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 178, Issue 2 ***********************************************

4 4

Updating firefox after a long time yum-excluded it and having installed it from .rpm
by wwp 08 Dec '19

08 Dec '19

Hello, I've been stuck for a while with an old version of firefox, installed from local .rpm (I know.. I should have downgraded using yum, instead) and added a exclude=firefox to the relevant .repo file. I did that after a yum-update has brought firefox 52+, and all add-ons were deprecated because of their new add-on scheme. Today that all the add-ons I need are available, I've tried upgrading to the latest Firefox version available from the updates repo.. I removed the exclude line in .repo file, but `yum update` didn't bring any firefox version at all: "No packages marked for update". I've struggled a bit, no way to get firefox installed using yum. See.. $ rpm -q firefox firefox-52.8.0-1.el7.centos.x86_64 $ yum info firefox Installed Packages Name : firefox Arch : x86_64 Version : 52.8.0 Release : 1.el7.centos Size : 149 M Repo : installed From repo : /firefox-52.8.0-1.el7.centos.x86_64 [snip] $ yum search firefox firefox.x86_64 : Mozilla Firefox Web browser $ yum update firefox No packages marked for update $ rpm -q firefox firefox-52.8.0-1.el7.centos.x86_64 $ rpm -e firefox $ rpm -q firefox package firefox is not installed $ yum install firefox No package firefox available. Even: $ yum localinstall firefox-68.2.0-1.el7.centos.x86_64.rpm Examining firefox-68.2.0-1.el7.centos.x86_64.rpm: firefox-68.2.0-1.el7.centos.x86_64 Nothing to do I still can install it using `rpm -i`, but I'm afraid yum-updates will not bring anything later. What an I doing wrong? Regards, -- wwp https://useplaintext.email/

2 2

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss December 2019