Discuss

discuss@lists.centos.org

2 participants
34758 discussions

What replaces the "grub" command
by Dave Cross 08 Aug '17

08 Aug '17

I recently had a failing disk replaced in my colo server. The server is running Centos 7.3. After the replacement, I was following these instructions to rebuild the RAID array that the disk was part of. https://help.1and1.co.uk/servers-c40665/dedicated-server-linux-c40577/rescu… Everything went fine until I reached the final section ("Grub Setup"). This section talks about running a command line program called "grub" to change the Grub configuration. And that program doesn't seem to be installed on this server. I admit that my knowledge of Grub is somewhat lacking. I know that Centos 7 uses Grub2 rather than the original Grub, but I don't know what replaced the "grub" command (or perhaps nothing replaced it and I just need to install a missing RPM). Any advice would be gratefully received. Thanks, Dave... -- Dave Cross :: dave(a)dave.org.uk http://dave.org.uk/ @davorg

2 2

Cloud and php
by Robert Moskowitz 07 Aug '17

07 Aug '17

I am looking at cloud software. On Centos7-armv7hl, of course. I was pointed to Nextcloud, but v11 CAN work with php 5.4 in Centos7, but recommends at least 5.5 for security updates and performance (important on arm), but recommends php 7. Nextcloud 12 has a minimum requirement of php 5.6 (according to their install pages). So. What are others doing for: Cloud Php ??? I could always start with Fedora26, but want to stay with Centos if I can. thank you.

2 1

Light-weight window manager, recommendations
by m.roth＠5-cent.us 07 Aug '17

07 Aug '17

So, I've mentioned that I've got an original netbook, circa 2009, and I'm going to put CentOS on it. 32 bit. Not huge disk, old Atom processor, not tons of memory. Any recommendations for a light-weight window manager? Before I went to KDE, I used fvwm2, and all I'm going to do is use it to read webmail and browse, read news, etc, so I don't need a lot. mark

5 5

centos7: looking for libwebpdemux
by wwp 06 Aug '17

06 Aug '17

Hello there, I'm looking for libwebpdemux.so, possibly 0.4.x. I had it installed on my CentOS6, from EPEL, but now on CentOS7, EPEL doesn't provide it at all. Anybody knows about it? Maybe a rpm rebuild would do it? Regards, -- wwp

2 2

VDQ Repos for CentOS 7
by Beartooth 05 Aug '17

05 Aug '17

I have a woefully dumb question. When I tell my wife's laptop, with CentOS 7 installed and a live ethernet cable plugged into it, "yum update," it fails saying that it doesn't see any repos. What do I need to do to?

3 4

What RH-like on a Dell XPS 15 (9590)?
by wwp 05 Aug '17

05 Aug '17

Hello there, I've just got a Dell XPS 15 (9590) at work and need to set up a stable GNU/Linux system on it. I thought of CentOS7, but.. obviously its kernel can't run on this hardware. What would you recommend? Waiting for CentOS8 is not an option unless it's a question of few weeks. Are there respins of the CentOS7 DVDs w/ more top-recent kernels? I'm know of Fedora 26 or course, and not willing to switch to Ubuntu 16.10 at all. Regards, -- wwp

18 54

CentOS users: please try and provide feedback on Fedora Boltron
by Matthew Miller 05 Aug '17

05 Aug '17

Please take a look at http://www.itworld.com/article/3211046/linux/red-hats-boltron-snaps-togethe… and https://fedoramagazine.org/announcing-boltron/ which has a walkthrough questionnaire at the bottom. Your feedback very appreciated. -- Matthew Miller <mattdm(a)fedoraproject.org> Fedora Project Leader

11 46

ipa rpm conflicts
by lejeczek 04 Aug '17

04 Aug '17

does anybody see this: unning transaction Warning: RPMDB altered outside of yum. ** Found 8 pre-existing rpmdb problem(s), 'yum check' output follows: ipa-admintools-4.4.0-14.el7.centos.noarch has installed conflicts freeipa-admintools: ipa-admintools-4.4.0-14.el7.centos.noarch ipa-client-4.4.0-14.el7.centos.x86_64 has installed conflicts freeipa-client: ipa-client-4.4.0-14.el7.centos.x86_64 ipa-client-common-4.4.0-14.el7.centos.noarch has installed conflicts freeipa-client-common: ipa-client-common-4.4.0-14.el7.centos.noarch ipa-common-4.4.0-14.el7.centos.noarch has installed conflicts freeipa-common: ipa-common-4.4.0-14.el7.centos.noarch ipa-python-compat-4.4.0-14.el7.centos.noarch has installed conflicts freeipa-python-compat: ipa-python-compat-4.4.0-14.el7.centos.noarch ipa-server-4.4.0-14.el7.centos.x86_64 has installed conflicts freeipa-server: ipa-server-4.4.0-14.el7.centos.x86_64 ipa-server-common-4.4.0-14.el7.centos.noarch has installed conflicts freeipa-server-common: ipa-server-common-4.4.0-14.el7.centos.noarch ipa-server-dns-4.4.0-14.el7.centos.noarch has installed conflicts freeipa-server-dns: ipa-server-dns-4.4.0-14.el7.centos.noarch this in .rpm I guess and started appearing after upg to 7.3. *freeipa* is naming convention Fedora uses, right? Some remnants rebase did not take care of? regards, L.

4 3

Centos7 System Storage Manager: Device /dev/sdc not found
by johan.vermeulen7＠telenet.be 03 Aug '17

03 Aug '17

Hello All, I 've gotten myself into trouble by running out of disk space. On an all-in-one Ovirt system some users have filled up a Windows7 virtual machine and in doing so filled up an nfs mount and in doing so filled up a root partition: B estandssysteem Grootte Gebruikt Besch Geb% Aangekoppeld op /dev/mapper/centos-root 50G 46G 4,8G 91% / devtmpfs 7,9G 0 7,9G 0% /dev tmpfs 7,9G 0 7,9G 0% /dev/shm tmpfs 7,9G 8,5M 7,9G 1% /run tmpfs 7,9G 0 7,9G 0% /sys/fs/cgroup /dev/md127 498M 106M 393M 22% /boot /dev/mapper/centos-home 20G 33M 20G 1% /home /dev/mapper/centos-var 360G 623M 360G 1% /var hotelcaw:/mnt/iso 50G 46G 4,8G 91% /rhev/data-center/mnt/hotelcaw:_mnt_iso tmpfs 1,6G 0 1,6G 0% /run/user/0 I tried to remedy that today by using ssm to add storage. I added an extra disk witch shows up as sdc: [ root@hotelcaw ~]# ssm list ---------------------------------------------------------------- Device Free Used Total Pool Mount point ---------------------------------------------------------------- /dev/md126 208.00 MB 437.84 GB 438.05 GB centos /dev/sda 465.76 GB PARTITIONED /dev/sda1 0.00 KB 500.94 MB 501.00 MB md /dev/sda2 0.00 KB 438.05 GB 438.18 GB md /dev/sdb 465.76 GB /dev/sdb1 0.00 KB 500.94 MB 501.00 MB md /dev/sdb2 0.00 KB 438.05 GB 438.18 GB md /dev/sdc 465.76 GB ---------------------------------------------------------------- ------------------------------------------------------ Pool Type Devices Free Used Total ------------------------------------------------------ centos lvm 1 208.00 MB 437.84 GB 438.05 GB ------------------------------------------------------ ------------------------------------------------------------------------------------- Volume Pool Volume size FS FS size Free Type Mount point ------------------------------------------------------------------------------------- /dev/centos/swap centos 7.88 GB linear /dev/centos/root centos 50.00 GB xfs 49.98 GB 4.83 GB linear / /dev/centos/home centos 20.01 GB xfs 20.00 GB 20.00 GB linear /home /dev/centos/var centos 359.96 GB xfs 359.79 GB 359.23 GB linear /var /dev/md126 md 438.05 GB raid1 /dev/md127 md 500.94 MB xfs 497.61 MB 417.29 MB raid1 /boot /dev/sda1 md 501.00 MB xfs 497.61 MB 417.29 MB part /dev/sdb1 md 501.00 MB xfs 497.61 MB 417.29 MB ------------------------------------------------------------------------------------- now adding /dev/sdc to pool centos fails with: [root@hotelcaw ~]# ssm add -p centos /dev/sdc Device /dev/sdc not found (or ignored by filtering). Unable to add physical volume '/dev/sdc' to volume group 'centos'. SSM Error (2012): ERROR running command: "lvm vgextend centos /dev/sdc" I did a format 0 on the hard drive that makes up /dev/sdc with: dd if=/dev/zero of=/dev/sdc bs=8M I suspect I need to prepare it further before it can be added. Can anyone advise me on this issue? Many Thanks J.

2 1

CentOS SDR Support
by Chris Olson 02 Aug '17

02 Aug '17

Several weeks ago, we posted a message seeking information about time sources. There were many helpful and educational responses. An excerpt from one of the responses is included below. We have been following up with regard to how SDR capabilities might be used for obtaining time using SDR dongles as well as using the time source product referenced in that response. Our SDR investigation has yielded many sources of information, but not a source dedicated to CentOS support for SDR products. Is there a CentOS subgroup and mail list directly involved with SDR device or system support? The SDR information resulting from our search has many references to ADS-B and the P3. It is almost like one absolutely must have a P3 to make use of SDR products. One thing that we did not find was any reference at all to SDR products and software for monitoring the frequencies used by recreational Remote Controlled Aircraft. Thanks again for all the helpful system time responses.

5 5

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss