- Discuss - lists.centos.org

OT:: Multiple PHP versions
by TE Dukes 22 Aug '22

22 Aug '22

Hello, Been trying to get multiple versions of PHP on a CentOS 7 machine, off and on for the past couple months. I have followed 5 or 6 different howtos but none work. They are very similar and they seems to be done on a fresh install as most do an apache install is the steps. I setup two virtualhosts one for PHP5.6 and one for PHP 7.4. When I create a file with phpinfo, it reports back 5.6.xxx on both sites. So, I'm wondering if I need to remove the existing PHP version that is included with CentOS? Any suggestions or a better way to do this? TIA

6 13

Make copy of CentOS 7
by Jerry Geis 20 Aug '22

20 Aug '22

I have a software raid 1 (2 disks) of CentOS 7 I want to make a working "copy" of this setup to another disk of the same size to another SSD and have it be bootable etc... Then edit something to turn off the RAID part as its only 1 disk. Or Run with the 1 disk and it will just think the second disk is failed. so can I just do "dd if=/dev/sda of=/dev/sdd" and that is all ? Put that disk in another machine and it runs? where sda is the first raid disk, sdb is second raid disk, sdc is something else not related and sdd would be where the disk loads as USB. Thanks, Jerry

1 0

Bottleneck and slowness.
by Kaushal Shriyan 20 Aug '22

20 Aug '22

Hi, Is there a way to measure the bottleneck or slowness for the below setup? For example is the slowness on any one of the below list? 1. Client Desktop Mac 2. Network 3. Remote Server CentOS Linux release 7.9.2009 (Core) Any utilities or tools to measure it? Please guide me. Thanks in advance. Best Regards, Kaushal

3 2

CentOS-announce Digest, Vol 206, Issue 3
by centos-announce-request＠centos.org 16 Aug '22

16 Aug '22

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2022:5996 CentOS 7 microcode_ctl BugFix Update (Johnny Hughes) 2. CEBA-2022:5940 CentOS 7 lldpad BugFix Update (Johnny Hughes) 3. CEBA-2022:5936 CentOS 7 gvfs BugFix Update (Johnny Hughes) 4. CEBA-2022:5938 CentOS 7 ksh BugFix Update (Johnny Hughes) 5. CESA-2022:5937 Moderate CentOS 7 kernel Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 15 Aug 2022 17:29:56 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2022:5996 CentOS 7 microcode_ctl BugFix Update Message-ID: <20220815172956.GA26535(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2022:5996 Upstream details at : https://access.redhat.com/errata/RHBA-2022:5996 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 10ba9a38035d22f8a1ee9eb610447ad60ca74948c3e82cb712eb09cf97eeeceb microcode_ctl-2.1-73.14.el7_9.x86_64.rpm Source: 03b31a4ce0180ace236e6e209bb4aca01a1e1f8fc2b407d095cf4ba07cc86667 microcode_ctl-2.1-73.14.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Mon, 15 Aug 2022 17:30:41 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2022:5940 CentOS 7 lldpad BugFix Update Message-ID: <20220815173041.GA27281(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2022:5940 Upstream details at : https://access.redhat.com/errata/RHBA-2022:5940 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 14b5a03ea26d2ce50c3b85067c66d70c255d308324891750f4deb390e7a68518 lldpad-1.0.1-7.git036e314.el7_9.i686.rpm 1c5b7d04128c901ef27ab4d83ef677d205b161991be8f9d8b1210a92bde8b3ab lldpad-1.0.1-7.git036e314.el7_9.x86_64.rpm fdad65275349657bbcdf47559eea430b65c4e7b72549cbc6960987457bc53c5b lldpad-devel-1.0.1-7.git036e314.el7_9.i686.rpm af27db711b76e9af2239a13ace9776ebce5fd5642631930f1b9ad66c9bc391f0 lldpad-devel-1.0.1-7.git036e314.el7_9.x86_64.rpm Source: b067f67b9253a6a918c0719fdff133496e8dc8f010f3b007b412330ef3da70b4 lldpad-1.0.1-7.git036e314.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 3 Date: Mon, 15 Aug 2022 17:31:41 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2022:5936 CentOS 7 gvfs BugFix Update Message-ID: <20220815173141.GA27907(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2022:5936 Upstream details at : https://access.redhat.com/errata/RHBA-2022:5936 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 4634b74cfe7dbc9b83774cbbc50314221241227045a9199072df357ddda72bf3 gvfs-1.36.2-7.el7_9.i686.rpm dacb7b788cec2e57fc23d0ff804942ec81a7a415eee8eca5a9a61540c86d896a gvfs-1.36.2-7.el7_9.x86_64.rpm b716a9548efd53a938625df1910ca436cae1cbf92940422987c01ae7cbb040e3 gvfs-afc-1.36.2-7.el7_9.x86_64.rpm 9f51218b8454129029c134ac7b8c3cfdae6f1bd1938cb010314534defd013717 gvfs-afp-1.36.2-7.el7_9.x86_64.rpm 8fbe338dd8adc0ef568214985a4b86d964a490b7b5eb963f88ed406169b64c43 gvfs-archive-1.36.2-7.el7_9.x86_64.rpm 938d5007ce1dff2b3235913a2a5efe8141b51ff690ea6d5b59b6289df55ab4f8 gvfs-client-1.36.2-7.el7_9.i686.rpm 8453856c66fc79e7ec946e471ab4cddd8112886e40b99a72093c616592b2258f gvfs-client-1.36.2-7.el7_9.x86_64.rpm 527d093e43a30a0f0ec3101a8926eeba2b14e4496c495e70a1d5a3ceca45adbd gvfs-devel-1.36.2-7.el7_9.i686.rpm 93d59adb2af4416388006f622bdf8c0f758944b16c04ac683b05b66a90cd48c7 gvfs-devel-1.36.2-7.el7_9.x86_64.rpm 2590f93594e0978b11599b182212244c231fcb0808dff97b691b518fbd531ada gvfs-fuse-1.36.2-7.el7_9.x86_64.rpm a0b60429c7fcd5fba41b9a28504facb63c1539487333911e73e7e2b166b38981 gvfs-goa-1.36.2-7.el7_9.x86_64.rpm 858c36d8de6e26caf93ad7dc07224b2b333fcf1617a211b7303e44cdd15a6f3d gvfs-gphoto2-1.36.2-7.el7_9.x86_64.rpm 474549f2d0c95b83d89f1d651d078459863a9e1f202ab7c4c64e77e2735fab8a gvfs-mtp-1.36.2-7.el7_9.x86_64.rpm 073a61debf16645920e116641fcf09bdcef80147f54754057c18515f5ebe1f8c gvfs-smb-1.36.2-7.el7_9.x86_64.rpm 78de7ead3aa002c4e670d2a6bb86af61059a4efe2b86257958242df65bc50d42 gvfs-tests-1.36.2-7.el7_9.x86_64.rpm Source: 71af2163e13954f922db9db6ba42310723d0f600f2f99e96557c6910d3b6d5d4 gvfs-1.36.2-7.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 4 Date: Mon, 15 Aug 2022 17:32:11 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2022:5938 CentOS 7 ksh BugFix Update Message-ID: <20220815173211.GA28162(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2022:5938 Upstream details at : https://access.redhat.com/errata/RHBA-2022:5938 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 86b8329276455f1ab7137f0bfbed2c18288a75bb75932393695583ae82613063 ksh-20120801-144.el7_9.x86_64.rpm Source: 02b36f3a7379bc7fab2d450061c018202f1cd72010a9455db24ed84c14f8c08c ksh-20120801-144.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 5 Date: Mon, 15 Aug 2022 17:35:43 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:5937 Moderate CentOS 7 kernel Security Update Message-ID: <20220815173543.GA28858(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:5937 Moderate Upstream details at : https://access.redhat.com/errata/RHSA-2022:5937 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 7284d6fec357299a1772944305ca58f5d48637a3031733bcdd30849ec50f7a98 bpftool-3.10.0-1160.76.1.el7.x86_64.rpm 2a53fc6879935314c27af738cec3350d3ceb42d0ac3d7163f52ab94febb50dea kernel-3.10.0-1160.76.1.el7.x86_64.rpm 572ff1fa3f621ad26e4183404533f0d373eee24c0a12955ab2ab39ca102d691e kernel-abi-whitelists-3.10.0-1160.76.1.el7.noarch.rpm a895efeb08422b537678146fb9329ca6a9b3238f9291a15d091a5a70273cfab3 kernel-debug-3.10.0-1160.76.1.el7.x86_64.rpm a219dbccfdca9ac57c9b9064dffadc0044870709a425252ba874f86cfa15084c kernel-debug-devel-3.10.0-1160.76.1.el7.x86_64.rpm d41b5d8b6192712bf36a8ca2a106db94ce0b4451ac3b212fd91ab7cb0ed75e82 kernel-devel-3.10.0-1160.76.1.el7.x86_64.rpm 0b31fcea001c43db8cd9d635933b11a63756f99e56b454bbfd3b201a1ec4a077 kernel-doc-3.10.0-1160.76.1.el7.noarch.rpm 843def5f9cabf23dde3a6c7cc1d52f68406f3af88c42d2d84dfe7a35cca79197 kernel-headers-3.10.0-1160.76.1.el7.x86_64.rpm 57519dda2c881614316fc810027c0c66b31bab6e5e16dcd0d91cf84b6d63fc3a kernel-tools-3.10.0-1160.76.1.el7.x86_64.rpm c5f291e7ee7a541358f9f6a3957b58ba61670f95010f0fbfb4d6b94d30857d5c kernel-tools-libs-3.10.0-1160.76.1.el7.x86_64.rpm 3c1b09a234b987d0d6b7eeda50bfd65fdd56ba1cd18a3d7bfaf6c502e6a18295 kernel-tools-libs-devel-3.10.0-1160.76.1.el7.x86_64.rpm 1a13b258a98c48877d221312e7236468718d76e2db7278d2da0271a016036278 perf-3.10.0-1160.76.1.el7.x86_64.rpm 10c12fcdffb2b2b7e1abf077db33b288fdffac49a4e0acff89864f7742b7dd65 python-perf-3.10.0-1160.76.1.el7.x86_64.rpm Source: 95e78f5edbe47807975067e75d81465681a05595cc5ee26cedae1a370e6c106e kernel-3.10.0-1160.76.1.el7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 206, Issue 3 ***********************************************

1 0

php 7.4 on C7
by H 12 Aug '22

12 Aug '22

I have a C7 server running Apache and php 7.0 and 7.2 simultaneously serving websites, both installed from SCL if I remember correctly. I now have a need to install a webapp requiring php 7.4 which seems to be available only from Remi's repository and IUS. Bearing in mind I do need to continue to serve the php 7.0 and 7.2 webapps using Apache, is there a reason to prefer Remi's repository over IUS or vice versa? Anything in particular to bear in mind installing from one of them and not damaging the current setup? Thanks.

1 0

Time-tracking software
by H 11 Aug '22

11 Aug '22

I am in search of open-source software to track billable time for myself. A quick Google search did not find anything that is open-source but I am hoping that this group might know of such software? The platform is C7.

6 7

modules maintenance
by Valere Binet 09 Aug '22

09 Aug '22

Hi, Are the default modules receiving security update? Security tools (Tenable) want me to update PHP to 7.4 claiming 7.2.24-1.module_el8.2.0+313+b04d0a66 has several vulnerabilities per CESA-2021:4213, CESA-2022:1935. Same with containers-common. Tenable wants 1.2.4-1.module_el8.6.0 rather than 1-23.module_el8.7.0+1106+45480ee0 even though both have the same 2022-03-16 date in the repo. (CESA-2022:1793, CESA-2022:2143). I don't find any centos-announce email mentioning the above CESA. Are the updates for the modules published separately? Where can I find them? Thank you in advance for your answers, Valère Binet

3 2

Re: [CentOS] Unable to relay mail through gmail anymore
by Richard 05 Aug '22

05 Aug '22

> Date: Friday, August 05, 2022 10:39:04 -0400 > From: Frank Bures <buresf(a)gmail.com> > > I have my CentOS7 sendmail configured to relay outgoing system > e-mail through my gmail account. > > The setup recently stopped working. Gmail SMTP keeps returning > "service unavailable". > > I think it has something to do with the recent changes in Gmail > authentication procedures. > > Does anyone know how to make the relaying work again? I could not > find anything on the Net. I'm assuming you are pushing the mail to gmail through port 465 or 587. If that's the case, if you aren't already, you will need to set up and use a google "app password". Alternatively, get whatever you are using on the centos side that authenticates with gmail to support OAuth 2. You can no longer use your google side-wide password to authenticate 3rd party apps with gmail so need to use one of the alternatives in its place. I would actually expect you to get an authentication failure message so they may have changed something else that disabled this approach.

3 2

Unable to relay mail through gmail anymore
by Frank Bures 05 Aug '22

05 Aug '22

Hi, I have my CentOS7 sendmail configured to relay outgoing system e-mail through my gmail account. The setup recently stopped working. Gmail SMTP keeps returning "service unavailable". I think it has something to do with the recent changes in Gmail authentication procedures. Does anyone know how to make the relaying work again? I could not find anything on the Net. Thanks Frank -- <listfrank1(a)gmail.com>

2 1

oddjob service / selinux denied
by Leon Fauster 05 Aug '22

05 Aug '22

Hey, anyone familiar with the oddjob service? I have configured the dbus and oddjobd and wanted to test it. While calling it with (as root): dbus-send --system --dest=local.domain.oddjob_csc --print-reply /admin local.domain.shee.oddjob_csc.test string:test I get: Error com.redhat.oddjob.Error.Exec: Child signalled exec() error: Permission denied. and type=SYSCALL msg=audit(1659709637.271:196): arch=c000003e syscall=59 success=no exit=-13 a0=55c9f28763d0 a1=55c9f286e0d0 a2=55c9f2870ee0 a3=0 items=0 ppid=4981 pid=6024 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="oddjobd" exe="/usr/sbin/oddjobd" subj=system_u:system_r:oddjob_t:s0-s0:c0.c1023 key=(null) type=AVC msg=audit(1659709637.271:196): avc: denied { transition } for pid=6024 comm="oddjobd" path="/usr/libexec/oddjob/sanity.sh" dev="dm-1" ino=15768 scontext=system_u:system_r:oddjob_t:s0-s0:c0.c1023 tcontext=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 tclass=process permissive=0 the configured test script is from the oddjob package: <method name="test"> <helper exec="/usr/libexec/oddjob/sanity.sh" arguments="1"/> <allow user="root"/> </method> As the AVC above shows, its a context transition that is not allowed? How is this service supposed to be used? I suspect that the method call must be in a context by itself, but which one? Any idea? Thanks, Leon

1 0

CentOS-announce Digest, Vol 206, Issue 2
by centos-announce-request＠centos.org 05 Aug '22

05 Aug '22

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2022:5776 Important CentOS 7 firefox Security Update (Johnny Hughes) 2. CESA-2022:5773 Important CentOS 7 thunderbird Security Update (Johnny Hughes) 3. CESA-2022:5905 Important CentOS 7 xorg-x11-server Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 4 Aug 2022 19:06:29 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:5776 Important CentOS 7 firefox Security Update Message-ID: <20220804190629.GA9453(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:5776 Important Upstream details at : https://access.redhat.com/errata/RHSA-2022:5776 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 40f292198cfd1d640409908c391eac750a799c0007158bd95505cc00794862e8 firefox-91.12.0-2.el7.centos.i686.rpm e063c651b9c19f3ff44c19dafd53594a57c6c58f609c5e0e419a4b724c4b5f87 firefox-91.12.0-2.el7.centos.x86_64.rpm Source: e41109e1d9cf1ca2b247f423b308abb3eea2f918ad877f071149c35b197277c7 firefox-91.12.0-2.el7.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Thu, 4 Aug 2022 19:07:44 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:5773 Important CentOS 7 thunderbird Security Update Message-ID: <20220804190744.GA9863(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:5773 Important Upstream details at : https://access.redhat.com/errata/RHSA-2022:5773 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: f009c9c18a2c60a9c998051c6c0a08500ac08b6f4d0b3e130aec02f0bac6afe5 thunderbird-91.12.0-1.el7.centos.x86_64.rpm Source: 9c9112e014a0add7077187c589967a727d13d57ba457721afdf8dd6691040144 thunderbird-91.12.0-1.el7.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 3 Date: Thu, 4 Aug 2022 19:09:12 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:5905 Important CentOS 7 xorg-x11-server Security Update Message-ID: <20220804190912.GA10605(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:5905 Important Upstream details at : https://access.redhat.com/errata/RHSA-2022:5905 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 9d2caa5bdf17716a2d9e2503e5e5490dd97a317659eb35ed3ee294d10b9132be xorg-x11-server-common-1.20.4-18.el7_9.x86_64.rpm 4ce199f03c4016f4eb22b3d9b8711e1cb1d9864540849b2a5a1c4df4ee5552eb xorg-x11-server-devel-1.20.4-18.el7_9.i686.rpm 1224b4daf58dc2c0d85e8536fe7e439c784d857c15e654ad9c5600780755947e xorg-x11-server-devel-1.20.4-18.el7_9.x86_64.rpm 84f175bef4d2561cae46398abd9317955cdbe6a2c0352227323da35cedc29948 xorg-x11-server-source-1.20.4-18.el7_9.noarch.rpm ef867ce0d361ef3e0350fa0128a70e322998b6b6c0ed8efaf0a06ff011e132c8 xorg-x11-server-Xdmx-1.20.4-18.el7_9.x86_64.rpm db91ac87e5096fe4cf5cd292f4692633d26bdafb9ceefc8288141677f62626ca xorg-x11-server-Xephyr-1.20.4-18.el7_9.x86_64.rpm 98dba21e88ff7d380ddbbdde2d2aa47ccf7bc6da63c4ae460dab25788449a87e xorg-x11-server-Xnest-1.20.4-18.el7_9.x86_64.rpm a88474ca9c7184610d2381b4f56de6ecd823c02da9266a63a5ba57230c0ae64d xorg-x11-server-Xorg-1.20.4-18.el7_9.x86_64.rpm bbe6a456297232dde9056eadfd3e0082764eea1606419c384a0779b6951f9ae7 xorg-x11-server-Xvfb-1.20.4-18.el7_9.x86_64.rpm ead119fe47b9382012e61124387aa69dfe644f344ccdfad3b91a64e1ab35f467 xorg-x11-server-Xwayland-1.20.4-18.el7_9.x86_64.rpm Source: e3a82d200b388e1cd8bb191f92f325b73618b3f19c95a48bed2a71fca3e60065 xorg-x11-server-1.20.4-18.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 206, Issue 2 ***********************************************

1 0

BIND server getting DDOS
by Robert Moskowitz 04 Aug '22

04 Aug '22

I just, maybe, figured out why I have been having problems with my CentOS DNS server with BIND 9.11.4. Aug 2 15:47:19 onlo named[6155]: client @0xaa3cad80 114.29.194.4#11205 (.): view external: query (cache) './A/IN' denied Aug 2 15:47:19 onlo named[6155]: client @0xaa3cad80 114.29.216.196#64956 (.): view external: query (cache) './A/IN' denied Aug 2 15:47:19 onlo named[6155]: client @0xaa3cad80 64.68.114.141#39466 (.): view external: query (cache) './A/IN' denied Aug 2 15:47:19 onlo named[6155]: client @0xaa3cad80 209.197.198.45#13280 (.): view external: query (cache) './A/IN' denied Aug 2 15:47:19 onlo named[6155]: client @0xaa3cad80 114.29.202.117#41955 (.): view external: query (cache) './A/IN' denied Aug 2 15:47:19 onlo named[6155]: client @0xaa3cad80 62.109.204.22#4406 (.): view external: query (cache) './A/IN' denied Aug 2 15:47:49 onlo named[6155]: client @0xa9420720 64.68.104.9#38518 (.): view external: query (cache) './A/IN' denied Aug 2 15:47:50 onlo named[6155]: client @0xaa882dc8 114.29.202.117#9584 (.): view external: query (cache) './A/IN' denied grep -c denied messages 46038 And that is since Jul 31 3am. Anyone have recommendations on how to stop this? thanks

6 7

Missing devel packages?
by Jean-Paul Chaput 27 Jul '22

27 Jul '22

Hello CentOS, After performing an update on July 23, on 9 stream, I did notice problems with egl-wayland. In the AppStream repository, the package: * egl-wayland-1.1.9-2.el9.x86_64.rpm is present, but it's "-devel" counterpart seems missing. So, if you have an older version of egl-wayland-devel installed, it complains that it cannot upgrade "egl-wayland". Same problem seems also to occurs with: * python3-greenlet-1.1.2-3.el9.x86_64.rpm Did I make a mistake or those "-devel" packages are really missing? Best, -- .-. J e a n - P a u l C h a p u t / Administrateur Systeme /v\ Jean-Paul.Chaput(a)lip6.fr /(___)\ work: (33) 01.44.27.53.99 ^^ ^^ cell: 06.66.25.35.55 home: 09.65.29.83.38 S U Sorbonne Université (former UPMC) L I P 6 Laboratoire d'Informatique de Paris VI C I A N Circuits Intégrés Analogiques & Numériques

1 0

bash script input password automatically.
by Kaushal Shriyan 26 Jul '22

26 Jul '22

Hi, I have the below commands to generate keystore.pkcs12 and keystore.jks files on CentOS Linux release 7.9.2009 (Core) openssl pkcs12 -export -clcerts -in fullchain1.pem -inkey privkey1.pem -out keystore.pkcs12 -name javasso keytool -importkeystore -srckeystore keystore.pkcs12 -srcstoretype pkcs12 -destkeystore keystore.jks -deststoretype jks -alias javasso I have created a small shell script to generate both keystore.pkcs12 and keystore.jks files. It prompts for a password. Is there a way to key in a password without prompt or non-interactive way? For example password is stored in a file and the bash script will source it instead of manually typing the password. Please suggest. Thanks in advance. Best Regards, Kaushal

3 2

selinux / duplicate subject to a custom named one
by Leon Fauster 22 Jul '22

22 Jul '22

Hey everyone, I wonder if I could copy an selinux subject (processes / httpd) to a local named one. So that it gets the same configuration as the source e.g.: httpd_exec_t -> httpd_microservice_exec_t The problem here: Some http microservices written in golang do get the same label as apache httpd (this is intentional for having a confined service): # ls -laZ /usr/libexec/myservice -rwxr-xr-x. 1 root root system_u:object_r:httpd_exec_t:s0 5168952 22. Jul 17:11 /usr/libexec/myservice Unfortunately, these webservices need access to /proc (e.g. for enumerating the sending queue via /proc/sys/net/core/somaxconn). Instead installing a module that allows this for all "httpd_t" allow httpd_t sysctl_net_t:file read; I would like to have a custom configuration thats a duplication of the http_t one. The module would then only allow read access for applications that really need it. Is that possible? Any other straight approach available? -- Thanks Leon

1 0

how to wild-card autofs mount - ?
by lejeczek 15 Jul '22

15 Jul '22

Hi guys. any autofs wizadm reading this and can tell how to "wild-card" this: /home/e23/U: -fstype=nfs4,acl 10.3.3.1:/USER-HOME/e23 I tried $USER in obvious place but it did not mount. many thanks, L.

2 1

Special characters in bash strings
by H 11 Jul '22

11 Jul '22

I have run into a bash variable string problem that I think I have nailed down to the variable string containing a tilde (~). Not sure if my conclusion is correct and could use some help. To make a long(er) story short, an associative array variable was created: p[work_path]="~/projects/test/" and referenced in the following format in the shell script: "${p[work_path]}" To my consternation this worked fine in some places but not in others. I tried to use the above construct when piping output, as part of a file reference when calling psql from the command line and when referencing an xslt file with xsltproc. In some places it worked, in others it did not but when I substituted the variable reference above with the path in clear text itself it then worked. It looks like there are some nuances on variable substitution that I have yet to learn, perhaps tied to the use of the tilde since using the variable p[work_path]="/home/user/projects/test/" seemed to work in all places. Pointers welcome!

4 5

PHP 7.4 from the Appstream repo
by Valere Binet 09 Jul '22

09 Jul '22

Hi, Tenable is complaining that our CentOS Stream release 8 system is vulnerable because it has php 7.2.24-1.module_el8.2... and it should have php 7.4.19-1.module_el8.5 On the mirror, I can see the PHP 7.4.19-1 and 7.4.19-2 in <mirror>/centos/8-stream/Appstream/x86_64/os/packages However, dnf list is stuck at 7.2.24-1 dnf clean all didn't help. How do I get my systems to "see" the 7.4 packages? The remi repo is not a good option for my company, we'd rather use the Appstream package since it is there. Are there reasons not to upgrade? If yes, does RedHat plan to apply the security updates to 7.2? Thank you in advance for any feedback Valère Binet

3 3

Re: [CentOS] Special characters in bash strings
by H 08 Jul '22

08 Jul '22

On 07/06/2022 11:27 PM, Chris Schanzle wrote: > Agree with Gordon's other response having specific examples of where it worked and didn't work would help us help you, but these things can get messy quickly. > > Since you quoted the tilde path, it is not expanded when assigned to your array. Take out the quotes to have it expanded at the time of assignment. If instead you want it expanded later, use eval. > > x="~/.bashrc" > $ echo "$x" $x; ls -l $x > ~/.bashrc ~/.bashrc > ls: cannot access '~/.bashrc': No such file or directory > > $ eval ls -l $x > -rw-r--r-- 1 schanzle mygroup 8720 Mar 4 15:46 /home/schanzle/.bashrc > > $ (ls -l $x) > ls: cannot access '~/.bashrc': No such file or directory > > $ bash -c "ls -l $x" > -rw-r--r-- 1 schanzle mygroup 8720 Mar 4 15:46 /home/schanzle/.bashrc > > > # no quotes = expansion at assignment > $ x=~/.bashrc > $ echo "$x" $x; ls -l $x > /home/schanzle/.bashrc /home/schanzle/.bashrc > -rw-r--r-- 1 schanzle mygroup 8720 Mar 4 15:46 /home/schanzle/.bashrc > > > Hope that helps, > Chris > > On 7/6/22 9:41 PM, H wrote: >> I have run into a bash variable string problem that I think I have nailed down to the variable string containing a tilde (~). Not sure if my conclusion is correct and could use some help. >> >> To make a long(er) story short, an associative array variable was created: >> >> p[work_path]="~/projects/test/" >> >> and referenced in the following format in the shell script: >> >> "${p[work_path]}" >> >> To my consternation this worked fine in some places but not in others. I tried to use the above construct when piping output, as part of a file reference when calling psql from the command line and when referencing an xslt file with xsltproc. >> >> In some places it worked, in others it did not but when I substituted the variable reference above with the path in clear text itself it then worked. >> >> It looks like there are some nuances on variable substitution that I have yet to learn, perhaps tied to the use of the tilde since using the variable p[work_path]="/home/user/projects/test/" seemed to work in all places. >> >> Pointers welcome! >> >> _______________________________________________ >> CentOS mailing list >> CentOS(a)centos.org >> https://lists.centos.org/mailman/listinfo/centos Thank you, I read up on bash expansion of tilde and realized substituting $HOME for ~ would be the best and would avoid any other unforeseen complications. Once I had done that the script worked.

1 0

install php version 8.0 on CentOS Linux release 7.9.2009
by Kaushal Shriyan 30 Jun '22

30 Jun '22

Hi, I am running ius-release-2-1.el7.ius.noarch on CentOS Linux release 7.9.2009 (Core). I am unable to locate the php 8.0 ius package as per https://www.php.net/supported-versions.php. Is there a way to install php version 8.0? Please guide me. Thanks in advance. Best Regards, Kaushal

2 1

R from EPEL
by lejeczek 29 Jun '22

29 Jun '22

Hi guys. Does anybody use R from EPEL on centOS 8 Stream? Is it just me or R 4.1.3 became/is single-threaded now? r25 benchmark - https://mac.r-project.org/benchmarks/ in part where is used to be, should be multi-threaded now is not. Total result from the benchmark does not look bad but it's just one benchmark and I wonder about everything else if indeed it is EPEL's R problem. many thanks, L.

1 0

Package of GCC 12 on CentOS 7
by david allan finch 20 Jun '22

20 Jun '22

Is there an rpm of GCC 12 (or at least higher than 9) available to download and install, or is it a case of downloading and build from the source yourself? Thanks.

4 6

nodejs 18 on centos 7
by Jerry Geis 17 Jun '22

17 Jun '22

I am currently running V14.19.3 of nodejs on Centos 7 I found this article: https://computingforgeeks.com/install-node-js-on-centos-rhel-rocky-linux/ to update to 18 I import the repo just fine. when I do : yum -y install nodejs I get : Package 2:nodejs-14.19.3-1nodesource.x86_64 already installed and latest version Nothing to do how do I install 18? more /etc/yum.repos.d/nodesource-el7.repo [nodesource] name=Node.js Packages for Enterprise Linux 7 - $basearch baseurl=https://rpm.nodesource.com/pub_18.x/el/7/$basearch failovermethod=priority enabled=1 gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/NODESOURCE-GPG-SIGNING-KEY-EL [nodesource-source] name=Node.js for Enterprise Linux 7 - $basearch - Source baseurl=https://rpm.nodesource.com/pub_18.x/el/7/SRPMS failovermethod=priority enabled=0 gpgkey=file:///etc/pki/rpm-gpg/NODESOURCE-GPG-SIGNING-KEY-EL gpgcheck=1 jerry

2 2

open source network diagnostic tools
by Christopher Wensink 11 Jun '22

11 Jun '22

Everyone, From time to time on our network we experience a pause where it seems like everything just hesitates for a time, this could be 2-10 seconds, then communications resume and everything is normal again. I suspect that there one machine that is occasionally sending out bad packets or is flooding the network when it shouldn't, but I don't know for sure. I've tried scanning with angry ip scanner to confirm IP addresses are set and communicating as documented. I've tried running captures with wireshark to try to identify one culprit but nothing is sticking out. I've tried tcpdump to see if something obvious is placed there, but it's a flood of information and it's difficult to tell what (if anything) is a problem and what is not. I'm also working on setting up icinga for monitoring all servers to see if that provides insight. What other tools / tactics would you use to identify the core cause of these kinds of intermittent pauses? Chris -- Christopher Wensink IS Administrator Five Star Plastics, Inc 1339 Continental Drive Eau Claire, WI 54701 Office: 715-831-1682 Mobile: 715-563-3112 Fax: 715-831-6075 cwensink(a)five-star-plastics.com www.five-star-plastics.com

3 2

Samba 4.16 hard-crashes
by lejeczek 10 Jun '22

10 Jun '22

Hi guys. Does anybody see this/similar issue, with Samba (from centos-release-samba416-1.0-1.1.el8.noarch) under IPA? (also Samba uses GlusterFS' libgfapi - samba-vfs-glusterfs-4.16.1-100.el8s.x86_64) -> $ systemctl restart smb.service Starting Samba SMB Daemon... [2022/06/08 19:17:32.937351, 0, pid=49122] ../../source3/smbd/server.c:1741(main) smbd version 4.16.1 started. Copyright Andrew Tridgell and the Samba Team 1992-2022 [2022/06/08 19:17:32.960756, 0, pid=49122] ../../lib/util/fault.c:172(smb_panic_log) =============================================================== [2022/06/08 19:17:32.960925, 0, pid=49122] ../../lib/util/fault.c:176(smb_panic_log) INTERNAL ERROR: Signal 6: Aborted in pid 49122 (4.16.1) [2022/06/08 19:17:32.960981, 0, pid=49122] ../../lib/util/fault.c:181(smb_panic_log) If you are running a recent Samba version, and if you think this problem is not yet fixed in the latest versions, please consider reporting this bug, see https://wiki.samba.org/index.php/Bug_Reporting [2022/06/08 19:17:32.961022, 0, pid=49122] ../../lib/util/fault.c:182(smb_panic_log) =============================================================== [2022/06/08 19:17:32.961056, 0, pid=49122] ../../lib/util/fault.c:184(smb_panic_log) PANIC (pid 49122): Signal 6: Aborted in 4.16.1 [2022/06/08 19:17:32.961647, 0, pid=49122] ../../lib/util/fault.c:288(log_stack_trace) BACKTRACE: 15 stack frames: #0 /lib64/libsamba-util.so.0(log_stack_trace+0x34) [0x7f41bbc0c7c4] #1 /lib64/libsamba-util.so.0(smb_panic+0xd) [0x7f41bbc0ca1d] #2 /lib64/libsamba-util.so.0(+0xeab9) [0x7f41bbc0cab9] #3 /lib64/libpthread.so.0(+0x12ce0) [0x7f41bb83bce0] #4 /lib64/libc.so.6(gsignal+0x10f) [0x7f41bb2a4a4f] #5 /lib64/libc.so.6(abort+0x127) [0x7f41bb277db5] #6 /lib64/libtalloc.so.2(+0x2f40) [0x7f41a34a7f40] #7 /lib64/libtalloc.so.2(+0x336c) [0x7f41a34a836c] #8 /usr/lib64/samba/pdb/ipasam.so(+0x11c2f) [0x7f41a38e7c2f] #9 /lib64/libsamba-passdb.so.0(make_pdb_method_name+0xb2) [0x7f41bbdae2f2] #10 /lib64/libsamba-passdb.so.0(+0x1d604) [0x7f41bbdae604] #11 /lib64/libsamba-passdb.so.0(initialize_password_db+0x1d) [0x7f41bbdb096d] #12 /usr/sbin/smbd(main+0x5d9) [0x55c945bbcf09] #13 /lib64/libc.so.6(__libc_start_main+0xf3) [0x7f41bb290ca3] #14 /usr/sbin/smbd(_start+0x2e) [0x55c945bbe6de] [2022/06/08 19:17:32.962008, 0, pid=49122] ../../source3/lib/dumpcore.c:318(dump_core) coredump is handled by helper binary specified at /proc/sys/kernel/core_pattern smb.service: Main process exited, code=dumped, status=6/ABRT smb.service: Failed with result 'core-dump'. Failed to start Samba SMB Daemon. For me all this, IPA's integrated Samba with GlusterFS, worked problem-free with 4.15 & earlier versions, so prior to 4.16 update which update brakes everything I believe. thanks, L.

1 0

CentOS-announce Digest, Vol 205, Issue 1
by centos-announce-request＠centos.org 08 Jun '22

08 Jun '22

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. [Infra] : Planned outage : git.centos.org (Fabian Arrotin) ---------------------------------------------------------------------- Message: 1 Date: Wed, 8 Jun 2022 07:24:38 +0200 From: Fabian Arrotin <arrfab(a)centos.org> To: "The CentOS developers mailing list." <centos-devel(a)centos.org>, centos-announce(a)centos.org, CentOS mailing list <centos(a)centos.org> Subject: [CentOS-announce] [Infra] : Planned outage : git.centos.org Message-ID: <2e632140-7589-f0bb-97aa-33ac2d74e2be(a)centos.org> Content-Type: text/plain; charset="utf-8"; Format="flowed" Due to a scheduled pagure upgrade, we'll have to move the existing Pagure instance (aka https://git.centos.org) to a new node. Migration is scheduled for """"Monday June 13rd, 7:00 am UTC time"""". You can convert to local time with $(date -d '2022-06-13 07:00 UTC') The expected "downtime" is estimated to ~60 minutes , time needed to : - backup/restore last DB dump - import and convert DB schema for newer pagure version - last data (sources in lookaside cache and git repositories) sync - verify service and switch public IP to new host. Important note wrt that migration is that we're moving from pagure 5.8 running on CentOS 7 to pagure 5.13 on RHEL 8. It means it's a new host and so sshd host keys will change (we didn't want to import older host keys to comply with newer algo) The new fingerprint will be displayed at usual place (https://git.centos.org/ssh_info) but it only matters for SIGs users pushing to specific projects/branches over ssh. For people pulling through https, nothing changes. Here are in advance the new fingerprints : rsa=3072 SHA256:qeSehpwh3X7HI0D/jF7N4qZcergdr9tUCdaZ2EIdiLc (RSA) rsa_md5=3072 MD5:a9:a1:ba:83:96:71:28:ca:86:19:c0:5d:4f:48:9f:63 (RSA) ecdsa=256 SHA256:vIRsg5g/t/7ucYP4NKTkcPJdE7CWbFQVInscthHKihU (ECDSA) ecdsa_md5=256 MD5:8f:40:35:4f:b9:43:60:d9:09:c0:5f:80:52:69:c8:8d (ECDSA) Also worth knowing that we also present a signed cert for sshd host keys, so if you already trust our CA (https://github.com/CentOS/ansible-role-sshd/blob/master/defaults/main.yml#L…) in your ~/.ssh/known_hosts file, you'll not even have to accept new key Thanks for your understanding and patience. on behalf of the Infra team, -- Fabian Arrotin The CentOS Project | https://www.centos.org gpg key: 17F3B7A1 | twitter: @arrfab

1 0

NFS Server Centos7
by Erik Frangež 07 Jun '22

07 Jun '22

Hi guys, we are setting NFS server on CentOS7 system. Everything working OK except speed, speed over NFS very drop... if we run dd command directly on server we are getting speed around 1,4Gbps, if we run from client connected to NFS is 200Mbps. Do you have maybe some advice what we need to check? Thank you! Best, Erik

6 5

C7 pam_oath.so changes group ownership of system file
by Tom Yates 04 Jun '22

04 Jun '22

I'm using pam_oath.so to control sudo access. The following line appears in my /etc/pam.d/sudo: auth sufficient pam_oath.so usersfile=/etc/users.oath window=5 digits=8 It works well, and has done since time out of mind. I've recently noticed, however, that having a user authenticate via a HOTP OATH token not only causes the /etc/users.oath file to be updated (which makes sense, the stored counter needs to be incremented) but also have its group-ownership changed to the primary group of the last user who sudoed. The file has no group read- or writeability, but it still strikes me as weird, and if the group modes were not -rwx, it might be a vulnerability. Does anyone else use HOTP OATH via PAM, and see this? Is there a good reason for it? [me@dormouse ~]$ ls -la /etc/users.oath -rw-------. 1 root root 550 Jun 4 10:31 /etc/users.oath [me@dormouse ~]$ sudo -l One-time password (OATH) for `me': [...] User me may run the following commands on dormouse: (ALL) ALL [me@dormouse ~]$ ls -la /etc/users.oath -rw-------. 1 root me 550 Jun 4 10:33 /etc/users.oath -- Tom Yates - https://www.teaparty.net

1 0

Centos 7 guest on virt-manager
by Jerry Geis 03 Jun '22

03 Jun '22

Hello - I am running Centos 7 virt-manager which I have used for years. Trying to install Ubuntu 22.04 as a guest. I have set up the CDRom - even disconnected and reset it - but it never boots the CDROM ??? Why ? It just defaults back to the OS that is already loaded. I'm confused. Why don't it boot the CDROM. I event set the boot options to BOOT CDROM and unchecked everything else. I have the VM machine set for secure boot. Thanks Jerry

2 1

Update RPM GPG key for EL9
by Orion Poplawski 02 Jun '22

02 Jun '22

Looks like the GPG key we use to sign our RPMs is not longer good with EL9: # rpm --import RPM-GPG-KEY-nwra error: RPM-GPG-KEY-nwra: key 1 import failed gpg key info: sec rsa2048/35DDB0B86218AC2F created: 2017-08-16 expires: never usage: SC trust: ultimate validity: ultimate ssb rsa2048/6A7FBC1E9DB22E8E created: 2017-08-16 expires: never usage: E Can someone explain what I need to do to make things compatible with EL9? Thank you! -- Orion Poplawski IT Systems Manager 720-772-5637 NWRA, Boulder/CoRA Office FAX: 303-415-9702 3380 Mitchell Lane orion(a)nwra.com Boulder, CO 80301 https://www.nwra.com/

2 4

centos 7 sendmail on AWS
by Jerry Geis 01 Jun '22

01 Jun '22

I am trying to get email out of AWS image to google on port 587. When I use telnet it connects - so 587 is a valid path... telnet smtp-relay.gmail.com 587 Trying 142.250.112.28... Connected to smtp-relay.gmail.com. Escape character is '^]'. 220 smtp-relay.gmail.com ESMTP l15-20020a17090a150f00b001dfac278995sm682651pja.12 - gsmtp ^]quit When I run interactive session: sendmail -Am -v -t To: X@Y From: X@Y Subject: test X@Y... Connecting to aspmx.l.google.com. port 587 via esmtp... sendmail.mc has define(`RELAY_MAILER_ARGS', `TCP $h 587')dnl define(`ESMTP_MAILER_ARGS', `TCP $h 587')dnl define(`RELAY_MAILER', `esmtp')dnl define(`null_client', `smtp-relay.gmail.com.') I dont understand why 587 is not connecting. It connects on the manual telnet. It does not connect otherwise. What might I be missing? Jerry

1 0

FW: NFS Server Centos7
by Erik Frangež 01 Jun '22

01 Jun '22

Any news? On 29/05/2022, 17:33, "CentOS on behalf of Erik Frangež via CentOS" <centos-bounces(a)centos.org on behalf of centos(a)centos.org> wrote: Hi guys, Thank you all for replys and sorry I was having enabled digest mode and I did not get all messages in time. Here are answers: Message 2: Client and server are virtual machines inside vmware environment which is connected to 10gbps. Network is devided between virtual machines. Physical servers are connected to Nexus switch with 10gbps. Message 3: We have try speeds with iperf, they are between 1 and 6 gbps, sometimes goes to 8gbps - depends of the load of networks. All checks was done with sync mode (NFS will be used for important data and we do not want to lose something). Message 4: Config is default, just installed and tested with NFSv3 NFSv4. Message 5: We did not enable jumbo frames on network. For all: We are testing speed with this script (PHP7.4): <?php // Define to join the language pack. define('BENCHFAIL_SLOWHARDDRIVE', 'slowharddrive'); $lorem = 'Lorem ipsum dolor sit amet, consectetur adipiscing elit. Pellentesque lacus felis, dignissim quis nisl sit amet, blandit suscipit lacus. Duis maximus, urna sed fringilla consequat, tellus ex sollicitudin ante, vitae posuere neque purus nec justo. Donec porta ipsum sed urna tempus, sit amet dictum lorem euismod. Phasellus vel erat a libero aliquet venenatis. Phasellus condimentum venenatis risus ut egestas. Morbi sit amet posuere orci, id tempor dui. Vestibulum eget sapien eget mauris eleifend ullamcorper. In finibus mauris id augue fermentum porta. Fusce dictum vestibulum justo eget malesuada. Nullam at tincidunt urna, nec ultrices velit. Nunc eget augue velit. Mauris sed rhoncus purus. Etiam aliquam urna ac nisl tristique, vitae tristique urna tincidunt. Vestibulum luctus nulla magna, non tristique risus rhoncus nec. Vestibulum vestibulum, nulla scelerisque congue molestie, dolor risus hendrerit velit, non malesuada nisi orci eget eros. Aenean interdum ut lectus quis semper. Curabitur viverra vitae augue id.'; $loremipsum = str_repeat($lorem, 16); $i = 0; $pass = 2000; $tempfile = '/srv/moodledata/test/benchmark.temp'; while ($i < $pass) { ++$i; file_put_contents($tempfile, $loremipsum); unlink($tempfile); } return array('limit' => 1, 'over' => 1.25, 'fail' => BENCHFAIL_SLOWHARDDRIVE); ?> On 29/05/2022, 14:00, "centos-bounces(a)centos.org on behalf of centos-request(a)centos.org" <centos-bounces(a)centos.org on behalf of centos-request(a)centos.org> wrote: ---------------------------------------------------------------------- Message: 1 Date: Sat, 28 May 2022 15:43:12 +0200 From: Erik Frange? <erik(a)frangez.net> To: centos(a)centos.org Subject: [CentOS] NFS Server Centos7 Message-ID: <6dfea2b2-1a90-059c-8ffe-f8f7f077508e(a)frangez.net> Content-Type: text/plain; charset=UTF-8; format=flowed Hi guys, we are setting NFS server on CentOS7 system. Everything working OK except speed, speed over NFS very drop... if we run dd command directly on server we are getting speed around 1,4Gbps, if we run from client connected to NFS is 200Mbps. Do you have maybe some advice what we need to check? Thank you! Best, Erik ------------------------------ Message: 2 Date: Sat, 28 May 2022 10:40:10 -0600 From: Frank Cox <theatre(a)sasktel.net> To: centos(a)centos.org Subject: Re: [CentOS] NFS Server Centos7 Message-ID: <20220528104010.b28a86a9d8ac9186f2fc3743(a)sasktel.net> Content-Type: text/plain; charset=UTF-8 On Sat, 28 May 2022 15:43:12 +0200 Erik Frange? via CentOS wrote: > we are setting NFS server on CentOS7 system. Everything working OK > except speed, speed over NFS very drop... if we run dd command directly > on server we are getting speed around 1,4Gbps, if we run from client > connected to NFS is 200Mbps. > > Do you have maybe some advice what we need to check? Speed of network card in the server. Speed of network card in the client. Speed of any and all routers and switches between the server and the client. -- MELVILLE THEATRE ~ Real D 3D Digital Cinema ~ www.melvilletheatre.com ------------------------------ Message: 3 Date: Sat, 28 May 2022 12:07:17 -0700 From: Skylar Thompson <skylar2(a)uw.edu> To: centos(a)centos.org Subject: Re: [CentOS] NFS Server Centos7 Message-ID: <20220528190717.ibbohtdtx4bzkl2w@hithlum> Content-Type: text/plain; charset=utf-8 I would start with something like iperf to measure the actual network throughput b/w the client and server. Once you have a baseline for that, we'd have to know things like read and write buffer sizes, and sync vs async mode. On Sat, May 28, 2022 at 03:43:12PM +0200, Erik Frange? via CentOS wrote: > Hi guys, > > we are setting NFS server on CentOS7 system. Everything working OK except > speed, speed over NFS very drop... if we run dd command directly on server > we are getting speed around 1,4Gbps, if we run from client connected to NFS > is 200Mbps. > > Do you have maybe some advice what we need to check? > > Thank you! > > Best, Erik -- -- Skylar Thompson (skylar2(a)u.washington.edu) -- Genome Sciences Department (UW Medicine), System Administrator -- Foege Building S046, (206)-685-7354 -- Pronouns: He/Him/His ------------------------------ Message: 4 Date: Sat, 28 May 2022 21:08:14 +0200 From: Leon Fauster <leonfauster(a)googlemail.com> To: centos(a)centos.org Subject: Re: [CentOS] NFS Server Centos7 Message-ID: <9f619570-23b6-eb0a-c68a-dfd744fbd122(a)gmail.com> Content-Type: text/plain; charset=UTF-8; format=flowed Am 28.05.22 um 18:40 schrieb Frank Cox: > On Sat, 28 May 2022 15:43:12 +0200 > Erik Frange? via CentOS wrote: > >> we are setting NFS server on CentOS7 system. Everything working OK >> except speed, speed over NFS very drop... if we run dd command directly >> on server we are getting speed around 1,4Gbps, if we run from client >> connected to NFS is 200Mbps. >> >> Do you have maybe some advice what we need to check? > > Speed of network card in the server. > Speed of network card in the client. > Speed of any and all routers and switches between the server and the client. > and what config is in place ? -- Leon ------------------------------ Message: 5 Date: Sat, 28 May 2022 19:52:29 -0400 From: Valeri Galtsev <galtsev(a)kicp.uchicago.edu> To: centos(a)centos.org Subject: Re: [CentOS] NFS Server Centos7 Message-ID: <9c231113-c3e2-7dc2-f2e1-b2cefd0ae274(a)kicp.uchicago.edu> Content-Type: text/plain; charset=UTF-8; format=flowed On 5/28/22 9:43 AM, Erik Frange? via CentOS wrote: > Hi guys, > > we are setting NFS server on CentOS7 system. Everything working OK > except speed, speed over NFS very drop... if we run dd command directly > on server we are getting speed around 1,4Gbps, if we run from client > connected to NFS is 200Mbps. > > Do you have maybe some advice what we need to check? > Make sure you have good speed of physical connection along the whole path from server to client(s), enable Jumbo packets on all switches along the path. NFS experts will add NFS specific tuning. Valeri > Thank you! > > Best, Erik > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > https://lists.centos.org/mailman/listinfo/centos ------------------------------ Subject: Digest Footer _______________________________________________ CentOS mailing list CentOS(a)centos.org https://lists.centos.org/mailman/listinfo/centos ------------------------------ End of CentOS Digest, Vol 208, Issue 8 ************************************** _______________________________________________ CentOS mailing list CentOS(a)centos.org https://lists.centos.org/mailman/listinfo/centos

1 0

Re: [CentOS] USB 2.5GbE NIC
by Mark Woolfson 01 Jun '22

01 Jun '22

Hi, Can anyone please help. I have an Intel NUC11i7 running CentOS 8.4 successfully. I have a Plugable USB 3.0 to 2.5GbE adapter to be used with the NUC. This works at 1GbE but the standard CentOS 8.4 driver will not allow me to change the speed. Can anyone please point me in the right direction for the driver and driver installation instructions. Advise would be appreciated for anyone who has done this. Mark Woolfson -- This email has been checked for viruses by AVG. https://www.avg.com

1 0

NFS Server Centos7
by Erik Frangež 29 May '22

29 May '22

Hi guys, Thank you all for replys and sorry I was having enabled digest mode and I did not get all messages in time. Here are answers: Message 2: Client and server are virtual machines inside vmware environment which is connected to 10gbps. Network is devided between virtual machines. Physical servers are connected to Nexus switch with 10gbps. Message 3: We have try speeds with iperf, they are between 1 and 6 gbps, sometimes goes to 8gbps - depends of the load of networks. All checks was done with sync mode (NFS will be used for important data and we do not want to lose something). Message 4: Config is default, just installed and tested with NFSv3 NFSv4. Message 5: We did not enable jumbo frames on network. For all: We are testing speed with this script (PHP7.4): <?php // Define to join the language pack. define('BENCHFAIL_SLOWHARDDRIVE', 'slowharddrive'); $lorem = 'Lorem ipsum dolor sit amet, consectetur adipiscing elit. Pellentesque lacus felis, dignissim quis nisl sit amet, blandit suscipit lacus. Duis maximus, urna sed fringilla consequat, tellus ex sollicitudin ante, vitae posuere neque purus nec justo. Donec porta ipsum sed urna tempus, sit amet dictum lorem euismod. Phasellus vel erat a libero aliquet venenatis. Phasellus condimentum venenatis risus ut egestas. Morbi sit amet posuere orci, id tempor dui. Vestibulum eget sapien eget mauris eleifend ullamcorper. In finibus mauris id augue fermentum porta. Fusce dictum vestibulum justo eget malesuada. Nullam at tincidunt urna, nec ultrices velit. Nunc eget augue velit. Mauris sed rhoncus purus. Etiam aliquam urna ac nisl tristique, vitae tristique urna tincidunt. Vestibulum luctus nulla magna, non tristique risus rhoncus nec. Vestibulum vestibulum, nulla scelerisque congue molestie, dolor risus hendrerit velit, non malesuada nisi orci eget eros. Aenean interdum ut lectus quis semper. Curabitur viverra vitae augue id.'; $loremipsum = str_repeat($lorem, 16); $i = 0; $pass = 2000; $tempfile = '/srv/moodledata/test/benchmark.temp'; while ($i < $pass) { ++$i; file_put_contents($tempfile, $loremipsum); unlink($tempfile); } return array('limit' => 1, 'over' => 1.25, 'fail' => BENCHFAIL_SLOWHARDDRIVE); ?> On 29/05/2022, 14:00, "centos-bounces(a)centos.org on behalf of centos-request(a)centos.org" <centos-bounces(a)centos.org on behalf of centos-request(a)centos.org> wrote: ---------------------------------------------------------------------- Message: 1 Date: Sat, 28 May 2022 15:43:12 +0200 From: Erik Frange? <erik(a)frangez.net> To: centos(a)centos.org Subject: [CentOS] NFS Server Centos7 Message-ID: <6dfea2b2-1a90-059c-8ffe-f8f7f077508e(a)frangez.net> Content-Type: text/plain; charset=UTF-8; format=flowed Hi guys, we are setting NFS server on CentOS7 system. Everything working OK except speed, speed over NFS very drop... if we run dd command directly on server we are getting speed around 1,4Gbps, if we run from client connected to NFS is 200Mbps. Do you have maybe some advice what we need to check? Thank you! Best, Erik ------------------------------ Message: 2 Date: Sat, 28 May 2022 10:40:10 -0600 From: Frank Cox <theatre(a)sasktel.net> To: centos(a)centos.org Subject: Re: [CentOS] NFS Server Centos7 Message-ID: <20220528104010.b28a86a9d8ac9186f2fc3743(a)sasktel.net> Content-Type: text/plain; charset=UTF-8 On Sat, 28 May 2022 15:43:12 +0200 Erik Frange? via CentOS wrote: > we are setting NFS server on CentOS7 system. Everything working OK > except speed, speed over NFS very drop... if we run dd command directly > on server we are getting speed around 1,4Gbps, if we run from client > connected to NFS is 200Mbps. > > Do you have maybe some advice what we need to check? Speed of network card in the server. Speed of network card in the client. Speed of any and all routers and switches between the server and the client. -- MELVILLE THEATRE ~ Real D 3D Digital Cinema ~ www.melvilletheatre.com ------------------------------ Message: 3 Date: Sat, 28 May 2022 12:07:17 -0700 From: Skylar Thompson <skylar2(a)uw.edu> To: centos(a)centos.org Subject: Re: [CentOS] NFS Server Centos7 Message-ID: <20220528190717.ibbohtdtx4bzkl2w@hithlum> Content-Type: text/plain; charset=utf-8 I would start with something like iperf to measure the actual network throughput b/w the client and server. Once you have a baseline for that, we'd have to know things like read and write buffer sizes, and sync vs async mode. On Sat, May 28, 2022 at 03:43:12PM +0200, Erik Frange? via CentOS wrote: > Hi guys, > > we are setting NFS server on CentOS7 system. Everything working OK except > speed, speed over NFS very drop... if we run dd command directly on server > we are getting speed around 1,4Gbps, if we run from client connected to NFS > is 200Mbps. > > Do you have maybe some advice what we need to check? > > Thank you! > > Best, Erik -- -- Skylar Thompson (skylar2(a)u.washington.edu) -- Genome Sciences Department (UW Medicine), System Administrator -- Foege Building S046, (206)-685-7354 -- Pronouns: He/Him/His ------------------------------ Message: 4 Date: Sat, 28 May 2022 21:08:14 +0200 From: Leon Fauster <leonfauster(a)googlemail.com> To: centos(a)centos.org Subject: Re: [CentOS] NFS Server Centos7 Message-ID: <9f619570-23b6-eb0a-c68a-dfd744fbd122(a)gmail.com> Content-Type: text/plain; charset=UTF-8; format=flowed Am 28.05.22 um 18:40 schrieb Frank Cox: > On Sat, 28 May 2022 15:43:12 +0200 > Erik Frange? via CentOS wrote: > >> we are setting NFS server on CentOS7 system. Everything working OK >> except speed, speed over NFS very drop... if we run dd command directly >> on server we are getting speed around 1,4Gbps, if we run from client >> connected to NFS is 200Mbps. >> >> Do you have maybe some advice what we need to check? > > Speed of network card in the server. > Speed of network card in the client. > Speed of any and all routers and switches between the server and the client. > and what config is in place ? -- Leon ------------------------------ Message: 5 Date: Sat, 28 May 2022 19:52:29 -0400 From: Valeri Galtsev <galtsev(a)kicp.uchicago.edu> To: centos(a)centos.org Subject: Re: [CentOS] NFS Server Centos7 Message-ID: <9c231113-c3e2-7dc2-f2e1-b2cefd0ae274(a)kicp.uchicago.edu> Content-Type: text/plain; charset=UTF-8; format=flowed On 5/28/22 9:43 AM, Erik Frange? via CentOS wrote: > Hi guys, > > we are setting NFS server on CentOS7 system. Everything working OK > except speed, speed over NFS very drop... if we run dd command directly > on server we are getting speed around 1,4Gbps, if we run from client > connected to NFS is 200Mbps. > > Do you have maybe some advice what we need to check? > Make sure you have good speed of physical connection along the whole path from server to client(s), enable Jumbo packets on all switches along the path. NFS experts will add NFS specific tuning. Valeri > Thank you! > > Best, Erik > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > https://lists.centos.org/mailman/listinfo/centos ------------------------------ Subject: Digest Footer _______________________________________________ CentOS mailing list CentOS(a)centos.org https://lists.centos.org/mailman/listinfo/centos ------------------------------ End of CentOS Digest, Vol 208, Issue 8 **************************************

1 0

dnf: hook after dnf command?
by Michael Schwartzkopff 25 May '22

25 May '22

Hi, I want to execute a command after every "dnf makecache". Is there a simple way to have a post-exec hook within the dnf system? Mit freundlichen Grüßen, -- [*] sys4 AG https://sys4.de, +49 (89) 30 90 46 64 Schleißheimer Straße 26/MG,80333 München Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263 Vorstand: Patrick Ben Koetter, Marc Schiffbauer, Wolfgang Stief Aufsichtsratsvorsitzender: Florian Kirstein

1 0

CentOS-announce Digest, Vol 204, Issue 3
by centos-announce-request＠centos.org 20 May '22

20 May '22

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2022:4642 Important CentOS 7 kernel Security Update (Johnny Hughes) 2. CEBA-2022:4640 CentOS 7 grub2 BugFix Update (Johnny Hughes) 3. CEBA-2022:4639 CentOS 7 qemu-kvm BugFix Update (Johnny Hughes) 4. CEBA-2022:4646 CentOS 7 rear BugFix Update (Johnny Hughes) 5. CEBA-2022:4641 CentOS 7 glibc BugFix Update (Johnny Hughes) 6. CEBA-2022:4647 CentOS 7 scap-security-guide BugFix Update (Johnny Hughes) 7. CEBA-2022:4648 CentOS 7 evolution-data-server BugFix Update (Johnny Hughes) 8. CEBA-2022:4645 CentOS 7 subscription-manager BugFix Update (Johnny Hughes) 9. CEBA-2022:4638 CentOS 7 at BugFix Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 19 May 2022 15:09:15 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:4642 Important CentOS 7 kernel Security Update Message-ID: <20220519150915.GA7598(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:4642 Important Upstream details at : https://access.redhat.com/errata/RHSA-2022:4642 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 81df5804e78ba7e49ce4ceb11f4b7c514d4f06d0ad146b950993c6cb77e58dfa bpftool-3.10.0-1160.66.1.el7.x86_64.rpm d407c748075b7355c9958eda5ff21771b816ee274b0d13adadeb34a3d3cb72ed kernel-3.10.0-1160.66.1.el7.x86_64.rpm de7f44e2c7986c23e352486d2894499d26f632330a153b346ea4363cdf0397cb kernel-abi-whitelists-3.10.0-1160.66.1.el7.noarch.rpm dbbb88d9eb3b101dd3369a46793946b7cefc449cb1c00dab5affc0a3c6adfad7 kernel-debug-3.10.0-1160.66.1.el7.x86_64.rpm 5b152b26c3cb00751f5faf6a0e5bf8cffab7cb953c9a7a44d5c064beadb2c64b kernel-debug-devel-3.10.0-1160.66.1.el7.x86_64.rpm 6ba3e0dd497e559f7b44eabac8136c12499febdb7526dbf3ba89a7b3627aed84 kernel-devel-3.10.0-1160.66.1.el7.x86_64.rpm 3ad9c854816cd51073279e25d66deb06e14c0f98f40cc6d468a2d1aee2d2c284 kernel-doc-3.10.0-1160.66.1.el7.noarch.rpm 0d768d1ea1cafc2aac35e0917a8c6e9184c802e60dc7add05251d7c940193f32 kernel-headers-3.10.0-1160.66.1.el7.x86_64.rpm 89508e57764f6439d8043a9ae25c798163d3dc7e1ea5019bab2063d6eaafb9c3 kernel-tools-3.10.0-1160.66.1.el7.x86_64.rpm 078d626065367dc1b0c00d308d8b5d9d69fe369a31b59dbf38747ea1e98647df kernel-tools-libs-3.10.0-1160.66.1.el7.x86_64.rpm b045612fcdf478362a31afe42cbcbfa3696fd627cd7125c30615831a7f9c7831 kernel-tools-libs-devel-3.10.0-1160.66.1.el7.x86_64.rpm df82dbee56b4fa877e8f7aef9b9d8dbc81c598816135c2ccea24f43af66790f7 perf-3.10.0-1160.66.1.el7.x86_64.rpm b1723c845eb0bd0f6313d26f5ab756da789229567920d005fec0525735b110a0 python-perf-3.10.0-1160.66.1.el7.x86_64.rpm Source: faf7f490bfb741e1d50b65515e911d5d2ee79f66d24be24d624255aecef013b3 kernel-3.10.0-1160.66.1.el7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Thu, 19 May 2022 15:15:04 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2022:4640 CentOS 7 grub2 BugFix Update Message-ID: <20220519151504.GA8823(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2022:4640 Upstream details at : https://access.redhat.com/errata/RHBA-2022:4640 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: adae3356227c5a5d2b0cfafcb5fc3b6cf03ad48f86eef253bff733b7354b3bac grub2-2.02-0.87.el7.9.x86_64.rpm 3395e8ad9f7af0bda511b16bd4b55ff20c8e4586d9a355cdafed2d9bd04d0302 grub2-common-2.02-0.87.el7.9.noarch.rpm 849825be99f88ecba6ed5de9a6a7d9765bd083cd21b521a974cb887cd48a6aad grub2-efi-ia32-2.02-0.87.el7.9.x86_64.rpm 0b1f1308392748234dc2d62bec5f24da0dff73890da2753549025ee5fb487257 grub2-efi-ia32-cdboot-2.02-0.87.el7.9.x86_64.rpm f5a0a400e2f5e8cd66aec3824b66b8660cf3e54aadd9a720f9f2399462bb49ec grub2-efi-ia32-modules-2.02-0.87.el7.9.noarch.rpm c84d373650f9fd97e7bb730e1e953fdef6ec789d2b883a0cff9322eaee4be48d grub2-efi-x64-2.02-0.87.el7.9.x86_64.rpm 6871b0da6aa6338c383fe802256bb80040196282213029950c3a7986429ae77f grub2-efi-x64-cdboot-2.02-0.87.el7.9.x86_64.rpm 75bfb81439d2ef6c0c971b27c7db45476e1b20b464f67f511703155ac0c1ebea grub2-efi-x64-modules-2.02-0.87.el7.9.noarch.rpm 22545ea29698bc42bfd578089ccf3c74a303185ac8d1f4b779fa17aef0cd1bf4 grub2-pc-2.02-0.87.el7.9.x86_64.rpm 7c20b930989dac7680f3e84104add833b14b4517b562ef91e50c0395cae23c79 grub2-pc-modules-2.02-0.87.el7.9.noarch.rpm 00c121a7508073d4e66734e07c25a53c32b7871e01d888bc3c51473bd0cb6de1 grub2-tools-2.02-0.87.el7.9.x86_64.rpm 4c03c349235a1cdf4028aa39daacb14e026f1a6cc0468cd45b0f8495345a50f1 grub2-tools-extra-2.02-0.87.el7.9.x86_64.rpm 24d715250bcb78dcd6011beb6f6603cd397147c8ad2e8da706abbe560b9e62e5 grub2-tools-minimal-2.02-0.87.el7.9.x86_64.rpm Source: be6955e51aba34d08e0b64315e7aa805ee51c811ec40344635678f5649016a43 grub2-2.02-0.87.el7.9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 3 Date: Thu, 19 May 2022 15:18:22 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2022:4639 CentOS 7 qemu-kvm BugFix Update Message-ID: <20220519151822.GA9905(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2022:4639 Upstream details at : https://access.redhat.com/errata/RHBA-2022:4639 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 7f71841bd15ea189a3946e054f1c018051ce33de76170da0fa7a4ec172429517 qemu-img-1.5.3-175.el7_9.6.x86_64.rpm 9b43305f54731049c328c1576f320912a045534f33373113f5ec315e63e8f094 qemu-kvm-1.5.3-175.el7_9.6.x86_64.rpm 0b35b40bf56766439cd4f160aa0bb3028afd3654b4df1a07cbe49d5a0c3642fb qemu-kvm-common-1.5.3-175.el7_9.6.x86_64.rpm 0449fb732714886324a83ab5585589c4bff8fd81cfd32d8cc00260106295b33b qemu-kvm-tools-1.5.3-175.el7_9.6.x86_64.rpm Source: 2be224b1fbba85d7442e31722dcd3509488432358f5add988a0e6ee26b3b0f13 qemu-kvm-1.5.3-175.el7_9.6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 4 Date: Thu, 19 May 2022 15:18:30 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2022:4646 CentOS 7 rear BugFix Update Message-ID: <20220519151830.GA10096(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2022:4646 Upstream details at : https://access.redhat.com/errata/RHBA-2022:4646 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: d94b31603d9a0603f9b8587d472ecc87593a0be74e3c99c956b06ed7a156102b rear-2.4-16.el7_9.x86_64.rpm Source: 0282f1302a80cf0e74f3b9975349ca550901066df19656c496c718a78aef7a36 rear-2.4-16.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 5 Date: Thu, 19 May 2022 15:18:57 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2022:4641 CentOS 7 glibc BugFix Update Message-ID: <20220519151857.GA10551(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2022:4641 Upstream details at : https://access.redhat.com/errata/RHBA-2022:4641 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 7b92de985a23ef4b67bd11135a92917ca99025920b1e4db59517205a2278c3f1 glibc-2.17-326.el7_9.i686.rpm 58dd6ecca9f9c38c402d46c56efacaf2a8739de21c64f22dfb3f9887f2de6c94 glibc-2.17-326.el7_9.x86_64.rpm aba75d84977de2cd5e9da00e763912c5e72ba28b55b17e081014e97ca13ce809 glibc-common-2.17-326.el7_9.x86_64.rpm 178ac00cbf99e924ca4b26e5bede47496404e34c1fe48906789d80dd955c9793 glibc-devel-2.17-326.el7_9.i686.rpm 68765f29d06d31652e80d398846d899e7437a836c1fffeb61248afa76e51b90f glibc-devel-2.17-326.el7_9.x86_64.rpm cffd614b0edc8b160d92daa7f3c4c4dffd5e33a66532c35ee32132d1b56e63b7 glibc-headers-2.17-326.el7_9.x86_64.rpm 2fda5e0025c27a97a92116265279bc7592a072372d95f68ec7c2e289e884155b glibc-static-2.17-326.el7_9.i686.rpm 670e8233e94a81c11ff801e9565903257b0694462a07b7f8724d3008d060ad94 glibc-static-2.17-326.el7_9.x86_64.rpm b8969d6cee16b77e095cb73262e74f3bea7aeaacc386fb96ed8274c2732c2893 glibc-utils-2.17-326.el7_9.x86_64.rpm 8d43d74f369183dc4073b21eb34b054828ea394433bb870f7b75b636e1135b24 nscd-2.17-326.el7_9.x86_64.rpm Source: 770b16256296a3242ed2e53ac43560e9bb0f1e4951b8d507faf424bd5ce95cf0 glibc-2.17-326.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 6 Date: Thu, 19 May 2022 15:19:12 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2022:4647 CentOS 7 scap-security-guide BugFix Update Message-ID: <20220519151912.GA10818(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2022:4647 Upstream details at : https://access.redhat.com/errata/RHBA-2022:4647 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 020558539740256bcdb84e7c5606c92c374e8b5d5af9021d52cb794b0f6131e1 scap-security-guide-0.1.57-8.el7.centos.noarch.rpm d40393b60950d71a26774d9b1e266fd5bb089196ab92a7c1d63bc4e09f86640c scap-security-guide-doc-0.1.57-8.el7.centos.noarch.rpm Source: 9571e357e4b892e16aa6323451d95ec4a5d8b7c9456f7752d3192b0b10a1be25 scap-security-guide-0.1.57-8.el7.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 7 Date: Thu, 19 May 2022 15:19:38 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2022:4648 CentOS 7 evolution-data-server BugFix Update Message-ID: <20220519151938.GA11272(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2022:4648 Upstream details at : https://access.redhat.com/errata/RHBA-2022:4648 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: cdc630a6947d25b54a576be1d51170f8ca7a920b446adaa54aece61b239e798d evolution-data-server-3.28.5-5.el7_9.1.i686.rpm e9ee7e077912afbee46d9de1440f905a3150a783ca98d2999145e7f0d4946b00 evolution-data-server-3.28.5-5.el7_9.1.x86_64.rpm 7174a32cc247b70e650aa36730fa976b5d7e498a9fc59fde5c06de3be20d8da3 evolution-data-server-devel-3.28.5-5.el7_9.1.i686.rpm d057cb97f19e0b7a6e8769b9407b59d09edac0f8548ba4137a65575461013ea6 evolution-data-server-devel-3.28.5-5.el7_9.1.x86_64.rpm 98fa7e7c32572003a415282278a680123f7896108aa35e2ddad608cf9a8bf1b6 evolution-data-server-doc-3.28.5-5.el7_9.1.noarch.rpm 1d2c5ccf5a54793d996b971ad4448b1d95a72bf1270703b1cdd944b0b4a82932 evolution-data-server-langpacks-3.28.5-5.el7_9.1.noarch.rpm 006866668980a661dabcff054750dcfabee9be838cbdbe8f6554a12c8d2437e4 evolution-data-server-perl-3.28.5-5.el7_9.1.x86_64.rpm a56dd9d75f85b76dd72f232aef6262710e4f66d7291c55f0e3467fa4c70855ee evolution-data-server-tests-3.28.5-5.el7_9.1.i686.rpm 284e903527e4376ba342697bff7afdcf76804823b3344908e0ad3589efb08d0e evolution-data-server-tests-3.28.5-5.el7_9.1.x86_64.rpm Source: cac18912d67be0be717caa1a64367389b6719f8342d15c0ae7950f32f78b449b evolution-data-server-3.28.5-5.el7_9.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 8 Date: Thu, 19 May 2022 15:20:19 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2022:4645 CentOS 7 subscription-manager BugFix Update Message-ID: <20220519152019.GA11906(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2022:4645 Upstream details at : https://access.redhat.com/errata/RHBA-2022:4645 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 9acf4764f875271e9b8edf93cb0f5241361a82fe81d1381df235edd88ffa4981 python-syspurpose-1.24.51-1.el7.centos.x86_64.rpm e8d290b951820742ddb84f040482ef781da092f44db1523ea7d4b25d3674bd2b rhsm-gtk-1.24.51-1.el7.centos.x86_64.rpm efe92dccaf584ac534e20c985a62a2b2030dbbc1cac6586eb9de81ac5dcc7acd subscription-manager-1.24.51-1.el7.centos.x86_64.rpm fa313558117870b2ad9b85826be67b6ecce53baa6ddcbf99024428840d38fba7 subscription-manager-cockpit-1.24.51-1.el7.centos.noarch.rpm 3a214c9b7993ff445157cc339c9a34103eea57c31ad42b15dba0db83b51bcda9 subscription-manager-gui-1.24.51-1.el7.centos.x86_64.rpm 758b00bfddac1117f7a640983316c5c512053334e60eb19cc2b8b9bd616cc341 subscription-manager-initial-setup-addon-1.24.51-1.el7.centos.x86_64.rpm 81962e4767ff3bdd232b266847805d5a9914ba7ee1f405ee6212d3e9a2ea45d0 subscription-manager-plugin-container-1.24.51-1.el7.centos.x86_64.rpm 7213e6e2bfdc556860c8f1e0dbd57dcd1201fe9556912fc6ed9c972b00af8306 subscription-manager-plugin-ostree-1.24.51-1.el7.centos.x86_64.rpm 0d2891caee1b493f9b544af0495b535e91b27d243df3f653a39ffeafe3e16dbe subscription-manager-rhsm-1.24.51-1.el7.centos.x86_64.rpm f97d96977b7b2e8e4ab1dfcae63bf6275503575c3a994ebfdf713ecee262b899 subscription-manager-rhsm-certificates-1.24.51-1.el7.centos.x86_64.rpm Source: 4216f0bfda1f688e39cbb262792ad95e1792da611616cb32b5dd599eaadac90b subscription-manager-1.24.51-1.el7.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 9 Date: Thu, 19 May 2022 15:20:30 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2022:4638 CentOS 7 at BugFix Update Message-ID: <20220519152030.GA12127(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2022:4638 Upstream details at : https://access.redhat.com/errata/RHBA-2022:4638 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: f9a5378694573063ecf61c516d27731ba3a515cc1b91bfced9a7057634a8d54c at-3.1.13-25.el7_9.x86_64.rpm 73839ad166f5daa6f4e5a2a9b08686fda05962283302afa1963df3b66c4b53e0 at-sysvinit-3.1.13-25.el7_9.x86_64.rpm Source: ddb7f32bfe8a656c8baa88391a7ef38be221e364367fc037f492966ecc64e992 at-3.1.13-25.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 204, Issue 3 ***********************************************

1 0

(no subject)
by Mario Santi Bellipanni 18 May '22

18 May '22

What are you doing here? How do you help LGBT people? You have put the sections in Dutch, English, French, German, Portuguese and Japanese but you have not put a page in Italian. Italy ranks 33 out of 49 of European nations that violate the rights of LGBT people. Portugal ranks # 10.

1 0

CentOS-announce Digest, Vol 204, Issue 2
by centos-announce-request＠centos.org 14 May '22

14 May '22

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2022:1487 Important CentOS 7 java-1.8.0-openjdk Security Update (Johnny Hughes) 2. CESA-2022:2213 Important CentOS 7 zlib Security Update (Johnny Hughes) 3. CESA-2022:2191 Important CentOS 7 gzip Security Update (Johnny Hughes) 4. CESA-2022:1440 Important CentOS 7 java-11-openjdk Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Fri, 13 May 2022 17:30:46 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:1487 Important CentOS 7 java-1.8.0-openjdk Security Update Message-ID: <20220513173046.GA32366(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:1487 Important Upstream details at : https://access.redhat.com/errata/RHSA-2022:1487 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: ef07f2b266e0d616931d672568f5c39d7789f51adb7332df77df77b19e7882a4 java-1.8.0-openjdk-1.8.0.332.b09-1.el7_9.i686.rpm efd5c472cec8f06ea30eaa8cef287b401fcdf4b0a30e6b2531888ea03f1f9549 java-1.8.0-openjdk-1.8.0.332.b09-1.el7_9.x86_64.rpm 6b024502ff2b69fb4876076ce49575439e5b94cae11c486cd7c59b464106d825 java-1.8.0-openjdk-accessibility-1.8.0.332.b09-1.el7_9.i686.rpm 98887262492c65c2f5769777ce9b0419c04f0f6dbf264e6ea58451ec3eb69bd6 java-1.8.0-openjdk-accessibility-1.8.0.332.b09-1.el7_9.x86_64.rpm 758d2c3a908dc2f48b1ab2c25ec323231a54e2b646281ebbd88192b61617775e java-1.8.0-openjdk-demo-1.8.0.332.b09-1.el7_9.i686.rpm e1931c2c08f74962ec1d742c785c518f1942b86d552b9e27d9cb776d4c555f8a java-1.8.0-openjdk-demo-1.8.0.332.b09-1.el7_9.x86_64.rpm f22ced6e5193aa0b22495fa95e9de588c04f9afa2d6070faf801306fc7e68363 java-1.8.0-openjdk-devel-1.8.0.332.b09-1.el7_9.i686.rpm 8b93611a7e50ab8b817c59d6ef504cf63f14b1ba210b4da69add3f3176898478 java-1.8.0-openjdk-devel-1.8.0.332.b09-1.el7_9.x86_64.rpm d17c2ab42cfa6667afaac7434e92be20fd0330b7a2cf8ad897daec993049f5e9 java-1.8.0-openjdk-headless-1.8.0.332.b09-1.el7_9.i686.rpm 3d985b2d2ec13d506f3e32f82236c706a953bf9178605bd7e9c559e99fe33c06 java-1.8.0-openjdk-headless-1.8.0.332.b09-1.el7_9.x86_64.rpm 029a613293d1ba49b765f0f2ec6fc0b71f6fd43fb1ceff50f43e05dc84f98d20 java-1.8.0-openjdk-javadoc-1.8.0.332.b09-1.el7_9.noarch.rpm 575e728d855d72fba88b860be7518db2c8fa0dc1add9046074dd5d320e1156bb java-1.8.0-openjdk-javadoc-zip-1.8.0.332.b09-1.el7_9.noarch.rpm c2c9b259e70aede7a57ebe7fa8a93a475866d4cce68f6b903edb0875c829bc6c java-1.8.0-openjdk-src-1.8.0.332.b09-1.el7_9.i686.rpm 88bc32f0b32b7bb8891d9dd012f0481bd2103ca60cadb3ebc387b8645c331524 java-1.8.0-openjdk-src-1.8.0.332.b09-1.el7_9.x86_64.rpm Source: f8922920f7e1b952557899bb9486b4a8fcd2d6f0ab614a2581ad55638a0e0ed8 java-1.8.0-openjdk-1.8.0.332.b09-1.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Fri, 13 May 2022 17:32:57 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:2213 Important CentOS 7 zlib Security Update Message-ID: <20220513173257.GA856(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:2213 Important Upstream details at : https://access.redhat.com/errata/RHSA-2022:2213 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: bddae66326cff2ad3bae20dfe8698be8546b0620b72acfdd23feb708989d5e53 minizip-1.2.7-20.el7_9.i686.rpm b40ba100ed5ee8ae86882af45ded185b07a11fcfe03cc9c0e8481bbe5a89278b minizip-1.2.7-20.el7_9.x86_64.rpm b0f845b17a6abdd7948335a2e03ef8bdbbf9e61bc00af3b2e543ed8708781374 minizip-devel-1.2.7-20.el7_9.i686.rpm d7d37b96a50496b4afbe1af4b21e18430fd0714fe31b3d770dbee2da882cb98a minizip-devel-1.2.7-20.el7_9.x86_64.rpm 79b31e2851cc21f81604266da5f6560bf26df1d0f6c6015f28b51d19463bbdb1 zlib-1.2.7-20.el7_9.i686.rpm 4286ac1c3d65716ecbf4c7210b1ecc94f1f602cc91db2bab294138fe254b2621 zlib-1.2.7-20.el7_9.x86_64.rpm 0a22fdb0f60d3be3fd66877b980e41dfe9e76361231ab306f3eb3a98c2ef3139 zlib-devel-1.2.7-20.el7_9.i686.rpm 052bc59d48a243df22b031df97865c1dc873c28379e0ef92b51f07311401764b zlib-devel-1.2.7-20.el7_9.x86_64.rpm b35155b1ceb01b0f1587514d282fbdc9fe8d837afdaf5f41c36043a5e5a43360 zlib-static-1.2.7-20.el7_9.i686.rpm d7742b51255b8d94dbac98ddda85c44af8fd3e086a9e97e34eaa931c19309558 zlib-static-1.2.7-20.el7_9.x86_64.rpm Source: a13b2cfcb5f2d168ff4820ca9e54f6b5a6f8f96aef3ae44e3a6883c81f46078e zlib-1.2.7-20.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 3 Date: Fri, 13 May 2022 17:33:20 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:2191 Important CentOS 7 gzip Security Update Message-ID: <20220513173320.GA1141(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:2191 Important Upstream details at : https://access.redhat.com/errata/RHSA-2022:2191 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: a38a894774d443bd314d09acaa9ee6056116e25f757c9e76290fe30450b9ca95 gzip-1.5-11.el7_9.x86_64.rpm Source: e9e64297606368b279ccd6cfae12d5feeba82e5b8ae4c776330a660969b6ac17 gzip-1.5-11.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 4 Date: Fri, 13 May 2022 17:34:53 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:1440 Important CentOS 7 java-11-openjdk Security Update Message-ID: <20220513173453.GA1692(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:1440 Important Upstream details at : https://access.redhat.com/errata/RHSA-2022:1440 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 43ba47c5fe93e659e2128f88d812fbff89a0212d3f97b085a69f6ec65e2a1b2a java-11-openjdk-11.0.15.0.9-2.el7_9.i686.rpm 0f0fa59eb6e08ac74519d59b709ce746a54f5ac7294b9ef563943eea5bdc327d java-11-openjdk-11.0.15.0.9-2.el7_9.x86_64.rpm 386d6eeb6ec186c7d3ac868781a062f7659e7f29629bf7919767ced443ced16e java-11-openjdk-demo-11.0.15.0.9-2.el7_9.i686.rpm 70b5a86232c1ba2b2535285ea1e7951e1c2ce4779402d9ef8b14a9e2574922c4 java-11-openjdk-demo-11.0.15.0.9-2.el7_9.x86_64.rpm 5a64f67b760664231aa056ce36899a472656f882e163cec3ee2c913fe4b34140 java-11-openjdk-devel-11.0.15.0.9-2.el7_9.i686.rpm 1b9fbe198a3af7e79bb697022c8043d39441c77daf5446b0e0b8e7f5c18603c8 java-11-openjdk-devel-11.0.15.0.9-2.el7_9.x86_64.rpm 0f91ee82a0f353071438675ca34ab961c867b90d20e8e45c2472604fdc1165ec java-11-openjdk-headless-11.0.15.0.9-2.el7_9.i686.rpm ecd28bfd8a7f97d111587dec88746bdc8143ed9ea22a73f2c05141e5361dc7c2 java-11-openjdk-headless-11.0.15.0.9-2.el7_9.x86_64.rpm 1f2763028ec3d49595e594f3c26e4361b3462c3391db1c8dbebdb12aeb792896 java-11-openjdk-javadoc-11.0.15.0.9-2.el7_9.i686.rpm 694a1661be3ee29b44619821670f2826998a9100cefc0efc36d04db24b211e47 java-11-openjdk-javadoc-11.0.15.0.9-2.el7_9.x86_64.rpm cb1e709d6fc4d17df3ff827f54f59d30c0e4cb11b30652b60e0f1087d387bdd9 java-11-openjdk-javadoc-zip-11.0.15.0.9-2.el7_9.i686.rpm 62bf471ba14072212be41f68548e536d8a022b8fffa4c7fdf94b4dc26c4d7d3a java-11-openjdk-javadoc-zip-11.0.15.0.9-2.el7_9.x86_64.rpm f1896e8ffe63eff76d82b6ef313c62631fce45258dee3c4ac0e2ffe4b8e841e6 java-11-openjdk-jmods-11.0.15.0.9-2.el7_9.i686.rpm 14d75975f6b77789e102a09b3e0c65a16a5cd38e795fdb34c4f40cf970a67b93 java-11-openjdk-jmods-11.0.15.0.9-2.el7_9.x86_64.rpm 20e9c59ba021cc9600dbade71b83e1e1b014eae44d6ba273d5fa6491d9508f08 java-11-openjdk-src-11.0.15.0.9-2.el7_9.i686.rpm 7541eb5333c72fe17aa8e0d7dc2f7f91d8769a57129608043af2b098b5741661 java-11-openjdk-src-11.0.15.0.9-2.el7_9.x86_64.rpm 33d81cf734e717eea6795c7c41a630b5e0eecbab4514f5859db6609e50ef0447 java-11-openjdk-static-libs-11.0.15.0.9-2.el7_9.i686.rpm 2ebb08ac7cb76c373713ca2bd23cc2232982bc402088afaa3c55fff250bb8869 java-11-openjdk-static-libs-11.0.15.0.9-2.el7_9.x86_64.rpm Source: 141fcaa4a4b7bd03f3b1872e38c4b0b01262e54743b82ce516a52ee1a6487b2c java-11-openjdk-11.0.15.0.9-2.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 204, Issue 2 ***********************************************

1 0

Mailing list archives pretty but need to be wider
by Kenneth Porter 12 May '22

12 May '22

The CSS for the list archives should specify a slightly larger width for the message text. Archives for this list: <https://lists.centos.org/pipermail/centos/> I looked up a useful reply in the archives for sharing elsewhere and found that they're nicely-formatted but the message display is a little narrow so the normal email wrapping column is wider than allowed by the archive page's CSS, resulting in text lines getting truncated unpleasantly. I'm guessing it's wrapping at 72 columns instead of 80 but I'm not enough of a CSS wizard to find how the element width is set but adding about 10% would probably fix it. Here's an example where the last 2-3 words of each line get wrapped to the next line: <https://lists.centos.org/pipermail/centos/2022-April/715512.html> (It's not as obvious in posts quoting a config file because those tend to be narrow and don't overflow the narrowed right margin. Looking up this message in the archives should show the problem, though.)

2 1

IPv6 token with /60 and prefix delegation
by Kenneth Porter 09 May '22

09 May '22

I'm trying to figure out how to assign a "static" address that automatically sets the prefix to what the ISP delegates. It seemed like the token system would accomplish that, but reading the kernel source code, I've discovered that tokens only work with a /64 delegation. My ISP offers a /60, so the token is ignored and I get a random address, instead. Is there some way to use prefix delegation to pick a /64 from the /60 and loop it back onto the same interface to make it use the token? Or is this /64 restriction actually a kernel bug? See line 2788 here, where the token is ignored if the prefix isn't /64: <https://elixir.bootlin.com/linux/latest/source/net/ipv6/addrconf.c> Am I reading the code wrong? It looks like all the autoconf stuff that computes interface addresses breaks with smaller prefixes.

3 3

building ngx_cache_purge module on CentOS Linux release 7.9.2009 (Core).
by Kaushal Shriyan 07 May '22

07 May '22

Hi, I am referring to https://github.com/FRiCKLE/ngx_cache_purge/ and running the open source nginx version: nginx/1.20.2 on CentOS Linux release 7.9.2009 (Core). When i trying to compile the ngx_cache_purge_module.c I am encountering fatal error: nginx.h: No such file or directory # ls -l total 76 -rw-r--r-- 1 501 wheel 1980 Dec 23 2014 CHANGES -rw-r--r-- 1 501 wheel 516 Dec 23 2014 config -rw-r--r-- 1 501 wheel 1424 Dec 23 2014 LICENSE -rw-r--r-- 1 501 wheel 51501 Dec 23 2014 ngx_cache_purge_module.c -rw-r--r-- 1 501 wheel 5090 Dec 23 2014 README.md drwxr-xr-x 2 501 wheel 80 May 7 02:22 t -rw-r--r-- 1 501 wheel 281 Dec 23 2014 TODO.md # #gcc -o ngx_cache_purge_module ngx_cache_purge_module.c ngx_cache_purge_module.c:30:19: fatal error: nginx.h: No such file or directory #include <nginx.h> ^ compilation terminated. # yum search nginx-devel Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: uk.mirrors.clouvider.net * centos-sclo-rh: uk.mirrors.clouvider.net * epel: d2lzkl7pfhq30w.cloudfront.net * extras: mirrors.vinters.com * updates: mirrors.vinters.com Warning: No matches found for: nginx-devel No matches found # rpm -qa | grep epel epel-release-7-14.noarch # cat /etc/redhat-release CentOS Linux release 7.9.2009 (Core) # Please correct me if I am missing something. Thanks in advance. Best Regards, Kaushal

3 5

CentOS-announce Digest, Vol 204, Issue 1
by centos-announce-request＠centos.org 07 May '22

07 May '22

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2022:1703 Important CentOS 7 firefox Security Update (Johnny Hughes) 2. CESA-2022:1725 Important CentOS 7 thunderbird Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Fri, 6 May 2022 16:01:51 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:1703 Important CentOS 7 firefox Security Update Message-ID: <20220506160151.GA2934(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:1703 Important Upstream details at : https://access.redhat.com/errata/RHSA-2022:1703 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 34f10adeaa6be7f713c3b688736291759f254661968bf607fab161503364705f firefox-91.9.0-1.el7.centos.i686.rpm c448f7707d3e7d90b0f7376b9e91d551448d8304a6b162d474c8cf243b7f11e5 firefox-91.9.0-1.el7.centos.x86_64.rpm Source: 7f24daa1c027a64942c2fa1874c3c783bef0a62cba47f59ac1fecf37a3478a11 firefox-91.9.0-1.el7.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Fri, 6 May 2022 16:02:55 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:1725 Important CentOS 7 thunderbird Security Update Message-ID: <20220506160255.GA3342(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:1725 Important Upstream details at : https://access.redhat.com/errata/RHSA-2022:1725 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: b8af2291b240e6adee1241ffbbc596bcb08dc54cfa7eec97883a3840e21871ca thunderbird-91.9.0-3.el7.centos.x86_64.rpm Source: 8d5d32ee00324acfa7303d98f2333f45ad43564fb103442ca293cb864dd810d9 thunderbird-91.9.0-3.el7.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 204, Issue 1 ***********************************************

1 0

Raspberry Pi 4 and C++ 17
by Will 30 Apr '22

30 Apr '22

Hi, I have a program I want to run on a Raspberry PI 4 that was written on an x86_64 architecture. So I downloaded the Raspberry PI image of CentOS 7 and now I'm on armv7hl. Unfortunately, there doesn't appear to be any devtools for arm at all. Is there an easy(ish) way to get c++ 17 this architecture? Thank you! --- Will

7 12

Where can I find more information on the recent update to the 4.18.0-373 kernel
by Kay Schenk 29 Apr '22

29 Apr '22

Hello folks -- Is there any write up for the most recent update to kernel 4.18.0-373 specifically with respect to sound setup or anything really? I had been using an "alpha" driver for my Intel sound that was appended to my boot line up until this latest. This not only did not work but caused continual hangs. Edited the 4.18.0-373 kernel line and things got somewhat better...but....this version is loading A LOT of modules and do I really need them, etc. I am going through a lot of grief with this recent upgrade. Thanks for any help... -- Kay

4 10

Testing
by Turritopsis Dohrnii Teo En Ming 27 Apr '22

27 Apr '22

Testing

1 0

CentOS Linux Notifications for any changes in files or folders
by Kaushal Shriyan 26 Apr '22

26 Apr '22

Hi, I am running CentOS Linux release 7.9.2009 (Core). Is there a way to notify via email if any files or folders have been accessed, modified, or changed? Also, if somebody deletes or adds any files in a specific folder /opt. Sysadmin should be notified via email or Slack channel using an alerting mechanism. Please guide and suggest. Thanks in advance. Best Regards, Kaushal

5 6

arcconf Linux utility for Adaptec AAC-RAID (Rocket) (rev 02) (IBM ServeRAID 8k/8k-l8) unable to query RAID controller
by Turritopsis Dohrnii Teo En Ming 25 Apr '22

25 Apr '22

Subject: arcconf Linux utility for Adaptec AAC-RAID (Rocket) (rev 02) (IBM ServeRAID 8k/8k-l8) unable to query RAID controller Good day from Singapore, Our client has IBM System x3650 server (machine type: 7979). Operating system is CentOS Linux 6.10 (32-bit). Recently we keep getting the following error messages (output generated by dmesg). <CODE> sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 09 2a d1 50 00 02 00 00 end_request: critical target error, dev sda, sector 153801040 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 09 2a cf 50 00 02 00 00 end_request: critical target error, dev sda, sector 153800528 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 09 2a d3 50 00 02 00 00 end_request: critical target error, dev sda, sector 153801552 JBD2: Detected IO errors while flushing file data on dm-0-8 JBD2: Detected IO errors while flushing file data on dm-0-8 JBD2: Detected IO errors while flushing file data on dm-0-8 JBD2: Detected IO errors while flushing file data on dm-0-8 JBD2: Detected IO errors while flushing file data on dm-0-8 JBD2: Detected IO errors while flushing file data on dm-0-8 JBD2: Detected IO errors while flushing file data on dm-0-8 JBD2: Detected IO errors while flushing file data on dm-0-8 JBD2: Detected IO errors while flushing file data on dm-0-8 JBD2: Detected IO errors while flushing file data on dm-0-8 JBD2: Detected IO errors while flushing file data on dm-0-8 JBD2: Detected IO errors while flushing file data on dm-0-8 JBD2: Detected IO errors while flushing file data on dm-0-8 JBD2: Detected IO errors while flushing file data on dm-0-8 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a cf 38 00 01 00 00 end_request: critical target error, dev sda, sector 153800504 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d0 38 00 01 00 00 end_request: critical target error, dev sda, sector 153800760 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d0 00 00 00 08 00 end_request: critical target error, dev sda, sector 153800704 </CODE> /dev/sda is a RAID 5 array with 3 harddisks of 136.6 GB capacity each. <CODE> [root@teo-en-ming-server ~]# fdisk /dev/sda WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): p Disk /dev/sda: 293.4 GB, 293378981888 bytes 255 heads, 63 sectors/track, 35667 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x8b047782 Device Boot Start End Blocks Id System /dev/sda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 35668 285989888 8e Linux LVM Command (m for help): </CODE> We rebooted the server several times. The next morning we still get the same error messages. <CODE> sd 0:0:0:0: [sda] 573005824 512-byte logical blocks: (293 GB/273 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 06 00 10 00 sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI removable disk dracut: Scanning devices sda2 for LVM logical volumes vg_teo-en-ming-server/lv_swap vg_teo-en-ming-server/lv_root EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: SELinux: initialized (dev sda1, type ext4), uses xattr sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d0 00 00 00 80 00 end_request: critical target error, dev sda, sector 153800704 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d0 00 00 00 08 00 end_request: critical target error, dev sda, sector 153800704 Buffer I/O error on device sda, logical block 19225088 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d0 00 00 00 08 00 end_request: critical target error, dev sda, sector 153800704 Buffer I/O error on device sda, logical block 19225088 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d0 00 00 00 08 00 end_request: critical target error, dev sda, sector 153800704 Buffer I/O error on device sda, logical block 19225088 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d0 00 00 00 08 00 end_request: critical target error, dev sda, sector 153800704 Buffer I/O error on device sda, logical block 19225088 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d0 08 00 00 08 00 end_request: critical target error, dev sda, sector 153800712 Buffer I/O error on device sda, logical block 19225089 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d0 08 00 00 08 00 end_request: critical target error, dev sda, sector 153800712 Buffer I/O error on device sda, logical block 19225089 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d0 08 00 00 08 00 end_request: critical target error, dev sda, sector 153800712 Buffer I/O error on device sda, logical block 19225089 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d0 08 00 00 08 00 end_request: critical target error, dev sda, sector 153800712 Buffer I/O error on device sda, logical block 19225089 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d0 10 00 00 08 00 end_request: critical target error, dev sda, sector 153800720 Buffer I/O error on device sda, logical block 19225090 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d1 10 00 00 08 00 end_request: critical target error, dev sda, sector 153800976 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d1 10 00 00 08 00 end_request: critical target error, dev sda, sector 153800976 Buffer I/O error on device sda, logical block 19225122 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d1 10 00 00 08 00 end_request: critical target error, dev sda, sector 153800976 Buffer I/O error on device sda, logical block 19225122 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d1 18 00 00 08 00 end_request: critical target error, dev sda, sector 153800984 Buffer I/O error on device sda, logical block 19225123 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d1 18 00 00 08 00 end_request: critical target error, dev sda, sector 153800984 Buffer I/O error on device sda, logical block 19225123 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d1 18 00 00 08 00 end_request: critical target error, dev sda, sector 153800984 Buffer I/O error on device sda, logical block 19225123 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d1 18 00 00 08 00 end_request: critical target error, dev sda, sector 153800984 Buffer I/O error on device sda, logical block 19225123 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d1 20 00 00 08 00 end_request: critical target error, dev sda, sector 153800992 Buffer I/O error on device sda, logical block 19225124 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d1 20 00 00 08 00 end_request: critical target error, dev sda, sector 153800992 Buffer I/O error on device sda, logical block 19225124 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d1 20 00 00 08 00 end_request: critical target error, dev sda, sector 153800992 Buffer I/O error on device sda, logical block 19225124 Buffer I/O error on device sda, logical block 19225124 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d2 28 00 00 08 00 end_request: critical target error, dev sda, sector 153801256 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d2 28 00 00 08 00 end_request: critical target error, dev sda, sector 153801256 Buffer I/O error on device sda, logical block 19225157 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d2 28 00 00 08 00 end_request: critical target error, dev sda, sector 153801256 Buffer I/O error on device sda, logical block 19225157 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d2 28 00 00 08 00 end_request: critical target error, dev sda, sector 153801256 Buffer I/O error on device sda, logical block 19225157 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d2 30 00 00 08 00 end_request: critical target error, dev sda, sector 153801264 Buffer I/O error on device sda, logical block 19225158 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d2 30 00 00 08 00 end_request: critical target error, dev sda, sector 153801264 Buffer I/O error on device sda, logical block 19225158 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d2 30 00 00 08 00 end_request: critical target error, dev sda, sector 153801264 Buffer I/O error on device sda, logical block 19225158 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d2 30 00 00 08 00 end_request: critical target error, dev sda, sector 153801264 Buffer I/O error on device sda, logical block 19225158 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d2 38 00 00 08 00 end_request: critical target error, dev sda, sector 153801272 Buffer I/O error on device sda, logical block 19225159 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d2 38 00 00 08 00 end_request: critical target error, dev sda, sector 153801272 Buffer I/O error on device sda, logical block 19225159 Buffer I/O error on device sda, logical block 19225159 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d3 30 00 00 08 00 end_request: critical target error, dev sda, sector 153801520 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d3 38 00 00 08 00 end_request: critical target error, dev sda, sector 153801528 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d3 38 00 00 08 00 end_request: critical target error, dev sda, sector 153801528 Buffer I/O error on device sda, logical block 19225191 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d3 38 00 00 08 00 end_request: critical target error, dev sda, sector 153801528 Buffer I/O error on device sda, logical block 19225191 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d3 38 00 00 08 00 end_request: critical target error, dev sda, sector 153801528 Buffer I/O error on device sda, logical block 19225191 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d3 40 00 00 08 00 end_request: critical target error, dev sda, sector 153801536 Buffer I/O error on device sda, logical block 19225192 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d3 40 00 00 08 00 end_request: critical target error, dev sda, sector 153801536 Buffer I/O error on device sda, logical block 19225192 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d3 40 00 00 08 00 end_request: critical target error, dev sda, sector 153801536 Buffer I/O error on device sda, logical block 19225192 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d3 40 00 00 08 00 end_request: critical target error, dev sda, sector 153801536 Buffer I/O error on device sda, logical block 19225192 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] sd 0:0:0:0: [sda] Add. Sense: Internal target failure sd 0:0:0:0: [sda] CDB: Read(10): 28 00 09 2a d3 48 00 00 08 00 end_request: critical target error, dev sda, sector 153801544 Buffer I/O error on device sda, logical block 19225193 Buffer I/O error on device sda, logical block 19225193 Buffer I/O error on device sda, logical block 19225193 </CODE> Based on the following discussion thread, we think that the RAID controller may be failing. Discussion thread: Which disk is bad in raid6 array Link: https://serverfault.com/questions/384935/which-disk-is-bad-in-raid6-array I had downloaded 32-bit arcconf Linux utility from the following link. Link: https://hwraid.le-vert.net/wiki/Adaptec <CODE> [root@teo-en-ming-server log]# lspci -vvv | grep RAID 04:00.0 RAID bus controller: Adaptec AAC-RAID (Rocket) (rev 02) Subsystem: IBM ServeRAID 8k/8k-l8 </CODE> However, we keep getting segmentation fault running arcconf utility. <CODE> [root@teo-en-ming-server log]# /usr/local/sbin/arcconf getconfig 1 Segmentation fault (core dumped) </CODE> These are the Linux Kernel messages. <CODE> Apr 22 11:11:33 teo-en-ming-server kernel: aacraid: Host adapter abort request (0,0,0,0) Apr 22 11:11:33 teo-en-ming-server kernel: aacraid: Host adapter reset request. SCSI hang ? Apr 22 11:11:33 teo-en-ming-server kernel: AAC: Host adapter BLINK LED 0x4 Apr 22 11:11:33 teo-en-ming-server kernel: AAC0: adapter kernel panic'd 4. Apr 22 11:12:23 teo-en-ming-server kernel: IRQ 17/aacraid: IRQF_DISABLED is not guaranteed on shared IRQs Apr 22 11:14:37 teo-en-ming-server kernel: aacraid: Host adapter abort request (0,0,0,0) Apr 22 11:14:37 teo-en-ming-server kernel: aacraid: Host adapter reset request. SCSI hang ? Apr 22 11:14:37 teo-en-ming-server kernel: AAC: Host adapter BLINK LED 0x4 Apr 22 11:14:37 teo-en-ming-server kernel: AAC0: adapter kernel panic'd 4. Apr 22 11:15:28 teo-en-ming-server kernel: IRQ 17/aacraid: IRQF_DISABLED is not guaranteed on shared IRQs Apr 22 11:16:34 teo-en-ming-server kernel: aacraid: Host adapter abort request (0,0,0,0) Apr 22 11:16:34 teo-en-ming-server kernel: aacraid: Host adapter reset request. SCSI hang ? Apr 22 11:16:34 teo-en-ming-server kernel: AAC: Host adapter BLINK LED 0x4 Apr 22 11:16:34 teo-en-ming-server kernel: AAC0: adapter kernel panic'd 4. </CODE> It seems that I could not query the RAID controller. It keeps saying that the RAID controller adapter has kernel panics. arcconf is a Linux utility to query the RAID controller. <CODE> [root@teo-en-ming-server cmdline]# lspci -nn | grep RAID 04:00.0 RAID bus controller [0104]: Adaptec AAC-RAID (Rocket) [9005:0286] (rev 02) </CODE> Do you know why I keep getting segmentation fault running arcconf Linux utility? Regards, Mr. Turritopsis Dohrnii Teo En Ming Targeted Individual in Singapore 24 April 2022 Sunday

2 1

Kernel rebuild failling on Centos 7: missing libbpf-devel and dwarves rpm too old
by Passerini Marco 20 Apr '22

20 Apr '22

Hi, I'm trying to rebuild the kernel specifically on Centos7 from src.rpm but some packages are missing or too old. I managed to get them and compile on Centos8 though. Any advice? # yumdownloader --source kernel.src # rpm -ivh ./kernel-4.18.0-348.20.1.el7.src.rpm # rpmbuild -bb --target=`uname -m` ~/rpmbuild/SPECS/kernel.spec Building target platforms: x86_64 Building for target x86_64 error: Failed build dependencies: libbpf-devel is needed by kernel-4.18.0-348.20.1.el7.x86_64 rpm < 4.13.0.1-19 conflicts with kernel-4.18.0-348.20.1.el7.x86_64 dwarves < 1.13 conflicts with kernel-4.18.0-348.20.1.el7.x86_64 # rpm -q dwarves dwarves-1.10-1.el7.x86_64 # rpm -q rpm rpm-4.11.3-48.el7_9.x86_64 # yum search libbpf-devel Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: de.mirrors.clouvider.net * centos-sclo-rh: ftp.tu-chemnitz.de * centos-sclo-sclo: centos.mirrors.psw.services * epel: ftp.uni-kl.de * extras: mirror.imt-systems.com * updates: centos.mirror.iphh.net Warning: No matches found for: libbpf-devel No matches found # yum info rpm Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: de.mirrors.clouvider.net * centos-sclo-rh: ftp.tu-chemnitz.de * centos-sclo-sclo: mirror.softaculous.com * epel: mirror.nextlayer.at * extras: mirror.imt-systems.com * updates: centos.mirror.iphh.net Installed Packages Name : rpm Arch : x86_64 Version : 4.11.3 Release : 48.el7_9 Size : 2.5 M Repo : installed >From repo : updates Summary : The RPM package management system URL : http://www.rpm.org/ License : GPLv2+ Description : The RPM Package Manager (RPM) is a powerful command line driven : package management system capable of installing, uninstalling, : verifying, querying, and updating software packages. Each software : package consists of an archive of files along with information about : the package like its version, a description, etc. # yum info dwarves Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: de.mirrors.clouvider.net * centos-sclo-rh: ftp.tu-chemnitz.de * centos-sclo-sclo: ftp.antilo.de * epel: mirror.de.leaseweb.net * extras: mirror.imt-systems.com * updates: centos.mirror.iphh.net Installed Packages Name : dwarves Arch : x86_64 Version : 1.10 Release : 1.el7 Size : 199 k Repo : installed >From repo : epel Summary : Debugging Information Manipulation Tools URL : http://oops.ghostprotocols.net:81/blog License : GPLv2 Description : dwarves is a set of tools that use the debugging information inserted in : ELF binaries by compilers such as GCC, used by well known debuggers such as : GDB, and more recent ones such as systemtap. : : Utilities in the dwarves suite include pahole, that can be used to find : alignment holes in structs and classes in languages such as C, C++, but not : limited to these. : : It also extracts other information such as CPU cacheline alignment, helping : pack those structures to achieve more cache hits. : : A diff like tool, codiff can be used to compare the effects changes in source : code generate on the resulting binaries. : : Another tool is pfunct, that can be used to find all sorts of information about : functions, inlines, decisions made by the compiler about inlining, etc. Regards, Marco Passerini

2 3

Apache APISIX on CentOS Linux release 7.9.2009 (Core)
by Kaushal Shriyan 14 Apr '22

14 Apr '22

Hi, I installing Apache APISIX https://apisix.apache.org/ on CentOS Linux release 7.9.2009 (Core) by referring to https://apisix.apache.org/docs/apisix/how-to-build [root@]#systemctl cat apisix.service # /usr/lib/systemd/system/apisix.service # apisix systemd service # https://github.com/api7/apisix-build-tools/blob/master/usr/lib/systemd/syst… [Unit] Description=apisix #Conflicts=apisix.service After=network-online.target Wants=network-online.target [Service] Type=forking Restart=on-failure WorkingDirectory=/usr/local/apisix ExecStart=/usr/bin/apisix start ExecStop=/usr/bin/apisix stop ExecReload=/usr/bin/apisix reload LimitNOFILE=65536 [Install] WantedBy=multi-user.target [root@]# systemctl restart apisix Job for apisix.service failed because the control process exited with error code. See "systemctl status apisix.service" and "journalctl -xe" for details. [root@apacheapisixapigateway ~]# systemctl status apisix ● apisix.service - apisix Loaded: loaded (/usr/lib/systemd/system/apisix.service; disabled; vendor preset: disabled) Active: failed (Result: start-limit) since Thu 2022-04-14 20:29:36 IST; 2ms ago Process: 1597 ExecStart=/usr/bin/apisix start (code=exited, status=1/FAILURE) Apr 14 20:29:35 apacheapisixapigateway systemd[1]: Failed to start apisix. Apr 14 20:29:35 apacheapisixapigateway systemd[1]: Unit apisix.service entered failed state. Apr 14 20:29:35 apacheapisixapigateway systemd[1]: apisix.service failed. Apr 14 20:29:36 apacheapisixapigateway systemd[1]: apisix.service holdoff time over, scheduling restart. Apr 14 20:29:36 apacheapisixapigateway systemd[1]: Stopped apisix. Apr 14 20:29:36 apacheapisixapigateway systemd[1]: start request repeated too quickly for apisix.service Apr 14 20:29:36 apacheapisixapigateway systemd[1]: Failed to start apisix. Apr 14 20:29:36 apacheapisixapigateway systemd[1]: Unit apisix.service entered failed state. Apr 14 20:29:36 apacheapisixapigateway systemd[1]: apisix.service failed. [root@]#journalctl -u apisix.service Apr 14 23:29:42 apacheapisixapigateway apisix[1798]: /usr/local/openresty/luajit/bin/luajit ./apisix/cli/apisix.lua start Apr 14 23:29:42 apacheapisixapigateway apisix[1798]: etcd cluster version 3.3.0 is less than the required version 3.4.0, please upgrade your etcd cluster Apr 14 23:29:42 apacheapisixapigateway systemd[1]: apisix.service: control process exited, code=exited status=1 Apr 14 23:29:42 apacheapisixapigateway systemd[1]: Failed to start apisix. Apr 14 23:29:42 apacheapisixapigateway systemd[1]: Unit apisix.service entered failed state. Apr 14 23:29:42 apacheapisixapigateway systemd[1]: apisix.service failed. Apr 14 23:29:42 apacheapisixapigateway systemd[1]: apisix.service holdoff time over, scheduling restart. Apr 14 23:29:42 apacheapisixapigateway systemd[1]: Stopped apisix. Apr 14 23:29:42 apacheapisixapigateway systemd[1]: Starting apisix... Apr 14 23:29:42 apacheapisixapigateway apisix[1822]: /usr/local/openresty/luajit/bin/luajit ./apisix/cli/apisix.lua start Apr 14 23:29:42 apacheapisixapigateway apisix[1822]: etcd cluster version 3.3.0 is less than the required version 3.4.0, please upgrade your etcd cluster Apr 14 23:29:42 apacheapisixapigateway systemd[1]: apisix.service: control process exited, code=exited status=1 Apr 14 23:29:42 apacheapisixapigateway systemd[1]: Failed to start apisix. Apr 14 23:29:42 apacheapisixapigateway systemd[1]: Unit apisix.service entered failed state. Apr 14 23:29:42 apacheapisixapigateway systemd[1]: apisix.service failed. Apr 14 23:29:42 apacheapisixapigateway systemd[1]: apisix.service holdoff time over, scheduling restart. Apr 14 23:29:42 apacheapisixapigateway systemd[1]: Stopped apisix. Apr 14 23:29:42 apacheapisixapigateway systemd[1]: Starting apisix... Apr 14 23:29:42 apacheapisixapigateway apisix[1845]: /usr/local/openresty/luajit/bin/luajit ./apisix/cli/apisix.lua start Apr 14 23:29:43 apacheapisixapigateway apisix[1845]: etcd cluster version 3.3.0 is less than the required version 3.4.0, please upgrade your etcd cluster Apr 14 23:29:43 apacheapisixapigateway systemd[1]: apisix.service: control process exited, code=exited status=1 Apr 14 23:29:43 apacheapisixapigateway systemd[1]: Failed to start apisix. Apr 14 23:29:43 apacheapisixapigateway systemd[1]: Unit apisix.service entered failed state. Apr 14 23:29:43 apacheapisixapigateway systemd[1]: apisix.service failed. Apr 14 23:29:43 apacheapisixapigateway systemd[1]: apisix.service holdoff time over, scheduling restart. Apr 14 23:29:43 apacheapisixapigateway systemd[1]: Stopped apisix. Apr 14 23:29:43 apacheapisixapigateway systemd[1]: Starting apisix... Apr 14 23:29:43 apacheapisixapigateway apisix[1869]: /usr/local/openresty/luajit/bin/luajit ./apisix/cli/apisix.lua start Apr 14 23:29:43 apacheapisixapigateway apisix[1869]: etcd cluster version 3.3.0 is less than the required version 3.4.0, please upgrade your etcd cluster Apr 14 23:29:43 apacheapisixapigateway systemd[1]: apisix.service: control process exited, code=exited status=1 Apr 14 23:29:43 apacheapisixapigateway systemd[1]: Failed to start apisix. Apr 14 23:29:43 apacheapisixapigateway systemd[1]: Unit apisix.service entered failed state. Apr 14 23:29:43 apacheapisixapigateway systemd[1]: apisix.service failed. Apr 14 23:29:43 apacheapisixapigateway systemd[1]: apisix.service holdoff time over, scheduling restart. Apr 14 23:29:43 apacheapisixapigateway systemd[1]: Stopped apisix. Apr 14 23:29:43 apacheapisixapigateway systemd[1]: start request repeated too quickly for apisix.service Apr 14 23:29:43 apacheapisixapigateway systemd[1]: Failed to start apisix. Apr 14 23:29:43 apacheapisixapigateway systemd[1]: Unit apisix.service entered failed state. Apr 14 23:29:43 apacheapisixapigateway systemd[1]: apisix.service failed. Please guide me. Thanks in Advance. Best Regards, Kaushal

2 1

server gave bad signature for RSA key 0 - ?
by lejeczek 12 Apr '22

12 Apr '22

Hi guys. Anybody has seen something like this from 'ssh' and care to comment? -> $ ssh 10.0.1.6 (root(a)10.0.1.6) Password: client_global_hostkeys_private_confirm: server gave bad signature for RSA key 0: error in libcrypto I have virtually identical c8 Stream boxes and only one gives out this message. I regen keys but that changed nothing. many thanks, L.

2 1

[Openssl]incorrect CVE mentioned in openssl changelog
by Akshar Kanak 08 Apr '22

08 Apr '22

Dear team in latest openssl openssl-1.0.2k-25.el7_9.x86_64 , looks like there is an issue with change logs . rpm -qi --changelog openssl-1.0.2k-25.el7_9.x86_64 shows me " * Wed Mar 23 2022 Dmitry Belyavskiy <dbelyavs(a)redhat.com> - 1:1.0.2k-25 - Fixes CVE-2022-2078 Infinite loop in BN_mod_sqrt() reachable when parsing certificates - Related: rhbz#2067160 " The CVE number should be CVE-2022-0778 . Right ? reference : https://bugzilla.redhat.com/show_bug.cgi?id=2062202 Thanks and regards Akshar

1 0

kickstart storage configuration hangs
by Leon Fauster 06 Apr '22

06 Apr '22

While playing with some CS9 kickstart installation attempts (manually/graphical works) I noticed following: What ever I provide as ks file "anaconda" outputs (text mode): <snip> Saving storage configuration ... Checking storage configuration ... . . .......................................................... <filling multiple lines> The ks file has nothing special, the storage related lines are: ignoredisk --only-use=nvme0n1 zerombr clearpart --all --initlabel --drives=nvme0n1 and then the part/volgroup/logvol lines. Does someone have the same issue? I guess anaconda is not ready? Because even the ks file from the manually installed system does not work ... -- Leon

2 2

Introducing CentOS Stream 9
by Johnny Hughes 05 Apr '22

05 Apr '22

Rich Bowen has posted a blog entry "Introducing CentOS Stream 9" https://blog.centos.org/2021/12/introducing-centos-stream-9/ More details here: https://centos.org/stream9/ Thanks, Johnny Hughes

5 13

Two labels, one mount point
by Kenneth Porter 01 Apr '22

01 Apr '22

I have a systemd mount unit that mounts an external drive by label. What happens if I plug in two USB external drives formatted with the same label? Does the last one discovered mount on top? I'm rotating backup drives and the backup software assumes the drive to be at a particular directory. Normally I'd stop the service, umount the drive (via systemd stop), unplug, plug the other one in, then start the service. (An automount unit will mount the replacement drive when the service touches the mount point.) But I'm wondering what happens if someone isn't careful and plugs in the 2nd drive before shutting down the service and removing the first one.

1 0

SELinux relabeling for a diffeerernt mount point
by Kenneth Porter 01 Apr '22

01 Apr '22

I'm preparing a disk mounted at /mnt/tmp to later be mounted at /var/lib/BackupPC. Is there some magic invocation to get the selinux labels for the structure I create to assume the final mount point, so that I don't have to relabel it when it's finally mounted at its target location? Or is there an argument to restorecon that will do the equivalent of chroot so that restorecon assumes the final location?

2 1

CentOS-announce Digest, Vol 203, Issue 2
by centos-announce-request＠centos.org 30 Mar '22

30 Mar '22

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2022:1032 CentOS 7 tzdata BugFix Update (Johnny Hughes) 2. CESA-2022:1045 Important CentOS 7 httpd Security Update (Johnny Hughes) 3. CESA-2022:1066 Important CentOS 7 openssl Security Update (Johnny Hughes) 4. CESA-2022:0824 Critical CentOS 7 firefox Security Update (Johnny Hughes) 5. CESA-2022:0850 Important CentOS 7 thunderbird Security Update (Johnny Hughes) 6. CESA-2022:1069 Important CentOS 7 expat Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 29 Mar 2022 13:34:23 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2022:1032 CentOS 7 tzdata BugFix Update Message-ID: <20220329133423.GA21687(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2022:1032 Upstream details at : https://access.redhat.com/errata/RHBA-2022:1032 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: ef535692955e3b9dc14a633b487f86ba36720866a39c354e86275b7f23d6adba tzdata-2022a-1.el7.noarch.rpm 69bfe28a120aa3364ed2beefdae50126ff4e6b20ea1caf0f1054904964676724 tzdata-java-2022a-1.el7.noarch.rpm Source: 3f0438cb6e72b6f0d7005a2e2783c608cc8603a480718b38697ffdc675096223 tzdata-2022a-1.el7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Tue, 29 Mar 2022 13:35:36 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:1045 Important CentOS 7 httpd Security Update Message-ID: <20220329133536.GA22208(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:1045 Important Upstream details at : https://access.redhat.com/errata/RHSA-2022:1045 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 35fc790f76f1d12e738a6b5cd1438085704844f9c267638a15f9cc080376b10d httpd-2.4.6-97.el7.centos.5.x86_64.rpm 57e3a74cb68c72426ee6a022b286950bbc4ac0c0a450be5d5e07d0a0ac91fcc0 httpd-devel-2.4.6-97.el7.centos.5.x86_64.rpm a52b0985bc9791dee53f7a73f22051cc229824892249b53b748eaad81619a0bf httpd-manual-2.4.6-97.el7.centos.5.noarch.rpm 601f376aa7ef59f60e13ba11f0a9a7286b883a945173b5b829fe2e939b6b3d1e httpd-tools-2.4.6-97.el7.centos.5.x86_64.rpm 9bc8c09cfaaabcb254797b1579fccbbf5a7ac3febd8172c07ad6764c33c3270e mod_ldap-2.4.6-97.el7.centos.5.x86_64.rpm d69a242a1a58b858cffa727cb8193e2ccaf358421e81076cf5c96b4a5082d5f9 mod_proxy_html-2.4.6-97.el7.centos.5.x86_64.rpm 1cd1ae8c0b9506f0a8066d9b0a935712889175386de9909062d20b0523e2876b mod_session-2.4.6-97.el7.centos.5.x86_64.rpm e1558062e338ec19488115a645f60559e370f1ddbf06a4b6e522b9803ac21304 mod_ssl-2.4.6-97.el7.centos.5.x86_64.rpm Source: e7711bdac101195a87b7ceb1d05293aee71c10fdc9b7f662e593211c94448035 httpd-2.4.6-97.el7.centos.5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 3 Date: Tue, 29 Mar 2022 13:36:31 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:1066 Important CentOS 7 openssl Security Update Message-ID: <20220329133631.GA22661(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:1066 Important Upstream details at : https://access.redhat.com/errata/RHSA-2022:1066 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 03b9fa607eacb360a4f21fe9861d8a7d571cf120e781d9e0c5639af4c8923a17 openssl-1.0.2k-25.el7_9.src.rpm 04f581972286e776f852cf380fd0a4c05af1556c3d62f8ad579d87985ee0467c openssl-1.0.2k-25.el7_9.x86_64.rpm 08396cb866f024b0054c16918fe544406f737f7ddefcecbda04ad29ab9a27a15 openssl-devel-1.0.2k-25.el7_9.i686.rpm 5989f8701c6fe912d154675a3f7ad276f5dccc5afc8ccce28405408ee673c16c openssl-devel-1.0.2k-25.el7_9.x86_64.rpm 7a1256ee4fd271d588649f70d8aa4492d3967b0afd9d82a145275924442baae0 openssl-libs-1.0.2k-25.el7_9.i686.rpm c01bfc1d06b6e8d39a0bb038993a565a42a4f152542fec05d266098c4206140f openssl-libs-1.0.2k-25.el7_9.x86_64.rpm 593df90370183706f3bc69451b1aa4c6cd88b0a4d1d3964bc1b8e621b3d67d97 openssl-perl-1.0.2k-25.el7_9.x86_64.rpm d2bc75a69afc2e940e2a933c55941d7c4f269ade992c161c681b9cd72ff158a4 openssl-static-1.0.2k-25.el7_9.i686.rpm 1adcef07e0e83f4fc27809eacf51bdd1d75267095f0cf92832e1d636e04e477c openssl-static-1.0.2k-25.el7_9.x86_64.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 4 Date: Tue, 29 Mar 2022 13:53:09 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:0824 Critical CentOS 7 firefox Security Update Message-ID: <20220329135309.GA2963(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:0824 Critical Upstream details at : https://access.redhat.com/errata/RHSA-2022:0824 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 078df219eb34b52cef5f93c17533da34f2eceaec30e85da8944716d38dfee196 firefox-91.7.0-3.el7.centos.i686.rpm 0b48a1dc6bd965ac5f800c44cf498da51c5fd0ec07bf16a07911d66f89932c4b firefox-91.7.0-3.el7.centos.x86_64.rpm Source: fe895a292e341716911619c187d5030176eda5d1c55869a61faf1cde01e442f1 firefox-91.7.0-3.el7.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 5 Date: Tue, 29 Mar 2022 13:54:14 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:0850 Important CentOS 7 thunderbird Security Update Message-ID: <20220329135414.GA3371(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:0850 Important Upstream details at : https://access.redhat.com/errata/RHSA-2022:0850 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: d75ace9160c666f8c11b19909fd788117c9134c9ec1c12c636f6a45ee642ed18 thunderbird-91.7.0-2.el7.centos.x86_64.rpm Source: f12b857c03422ca4fd610898acf959c554126e0038b0cff81d2fd9466b1532bd thunderbird-91.7.0-2.el7.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 6 Date: Tue, 29 Mar 2022 22:31:03 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:1069 Important CentOS 7 expat Security Update Message-ID: <20220329223103.GA21014(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:1069 Important Upstream details at : https://access.redhat.com/errata/RHSA-2022:1069 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: c653aaa3759f6c65e6ccf1dafa36096bf4821f315dbf756943730947258100ef expat-2.1.0-14.el7_9.i686.rpm b0179562abc1ff5d40c03661749ce4f7f4c7d58c428cecfc4a3711bfa98e6ec6 expat-2.1.0-14.el7_9.x86_64.rpm f4c0956c54c55adea5769904bb460f6ab64b017d31e9a73f0a047345be6dd6af expat-devel-2.1.0-14.el7_9.i686.rpm 301d479dffc9084746269cad6d9be379a3c01fafa139c9203aa5c98ca7e9d79e expat-devel-2.1.0-14.el7_9.x86_64.rpm a962654ff0fe134fdd88392c47a711e94bc84e08e27d0a7cb7d28e9150d2999a expat-static-2.1.0-14.el7_9.i686.rpm 46c46ba8573d8f101c53fe10179a66e853ec151d66f5dfb686fb60c5e75aa610 expat-static-2.1.0-14.el7_9.x86_64.rpm Source: 6c86a22138aaddd33328f353b445995e9a67f824e4cb25423b1e07b325142366 expat-2.1.0-14.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 203, Issue 2 ***********************************************

1 0

Updating a package to one from a different repository
by Kenneth Porter 29 Mar '22

29 Mar '22

At some point I updated fail2ban from a copr repo to get the latest release. That repo no longer exists but a newer version is available in EPEL. Is there a direct way to get yum to update using the different repo? Or do I need to save my config and DB, erase the old version, and install the new one from EPEL?

2 1

Compatible SATA controller needed
by Pete Geenhuizen 27 Mar '22

27 Mar '22

I'm trying to install Centos 8 on an older PC but it fails because the SATA controller isn't supported. Anyone have a source for a PCI/ePCI controller card that is compatible with Centos 8? Thanks Pete -- Unencumbered by the thought process. -- Click and Clack the Tappet brothers

4 5

kernel message format - how ?
by lejeczek 24 Mar '22

24 Mar '22

Hi guys. When kernel - I think - broadcasts messages, spits to console, I wonder how one controls that message format. I specifically think of what 'dmesg' offers for time parts of the message, eg. '--reltime' - so the same only persistent/default behavior. many thanks, L.

1 0

Cron and GNU parallel
by Joseph L. Casale 21 Mar '22

21 Mar '22

I am using parallel-20190922-1 from epel and when I run a job in cron such as /usr/bin/parallel /usr/bin/bash ::: a.sh b.sh c.sh I don't receive any mail regardless of all three scripts generating output. All other jobs in cron generate mail if they write to stdout or stderr. When the above is run at a terminal, I get the output from all three jobs grouped in the order they complete. I can't find any documentation for parallel that states the behavior when not running with a terminal. Anyone have any ideas? Thanks, jlc

1 0

Re: [CentOS] Updating a package to one from a different repository
by Fred 21 Mar '22

21 Mar '22

Delete the package then reinstall from EPEL??? On Mon, Mar 21, 2022, 10:33 Kenneth Porter <shiva(a)sewingwitch.com> wrote: > At some point I updated fail2ban from a copr repo to get the latest > release. That repo no longer exists but a newer version is available in > EPEL. Is there a direct way to get yum to update using the different repo? > Or do I need to save my config and DB, erase the old version, and install > the new one from EPEL? > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > https://lists.centos.org/mailman/listinfo/centos >

1 0

TCP Sequence Number Approximation Based Denial of Service on CentOS Linux release 7.9.2009 (Core)
by Kaushal Shriyan 18 Mar '22

18 Mar '22

Hi, I have 3.10.0-1160.59.1.el7.x86_64 on CentOS Linux release 7.9.2009 (Core) running Nagios Monitoring system. We have run an external vulnerability scan today on this server. The vulnerability reports say the below details. I am not sure if I completely understand the below issue. CVSS base score:- 5.0 CVE-2004-0230 Severity : Medium TCP Sequence Number Approximation Based Denial of Service TCP provides stateful communications between hosts on a network. TCP sessions are established by a three-way handshake and use random 32-bit sequence and acknowledgement numbers to ensure the validity of traffic. A vulnerability was reported that may permit TCP sequence numbers to be more easily approximated by remote attackers. This issue affects products released by multiple vendors. The cause of the vulnerability is that affected implementations will accept TCP sequence numbers within a certain range, known as the acknowledgement range, of the expected sequence number for a packet in the session. This is determined by the TCP window size, which is negotiated during the three-way handshake for the session. Larger TCP window sizes may be set to allow for more throughput, but the larger the TCP window size, the more probable it is to guess a TCP sequence number that falls within an acceptable range. It was initially thought that guessing an acceptable sequence number was relatively difficult for most implementations given random distribution, making this type of attack impractical. However, some implementations may make it easier to successfully approximate an acceptable TCP sequence number, making these attacks possible with a number of protocols and implementations. This is further compounded by the fact that some implementations may support the use of the TCP Window Scale Option, as described in RFC 1323, to extend the TCP window size to a maximum value of 1 billion. This vulnerability will permit a remote attacker to inject a SYN or RST packet into the session, causing it to be reset and effectively allowing for denial of service attacks. An attacker would exploit this issue by sending a packet to a receiving implementation with an approximated sequence number and a forged source IP address and TCP port. There are a few factors that may present viable target implementations, such as those which depend on long-lived TCP connections, those that have known or easily guessed IP address endpoints and those implementations with easily guessed TCP source ports. It has been noted that Border Gateway Protocol (BGP) is reported to be particularly vulnerable to this type of attack, due to the use of long-lived TCP sessions and the possibility that some implementations may use the TCP Window Scale Option. As a result, this issue is likely to affect a number of routing platforms. Another factor to consider is the relative difficulty of injecting packets into TCP sessions, as a number of receiving implementations will reassemble packets in order, dropping any duplicates. This may make some implementations more resistant to attacks than others. It should be noted that while a number of vendors have confirmed this issue in various products, investigations are ongoing and it is likely that many other vendors and products will turn out to be vulnerable as the issue is investigated further. Solution Please first check the results section below for the port number on which this vulnerability was detected. If that port number is known to be used for port-forwarding, then it is the backend host that is really vulnerable. Various implementations and products including Check Point, Cisco, Cray Inc, Hitachi, Internet Initiative Japan, Inc (IIJ), Juniper Networks, NEC, Polycom, and Yamaha are currently undergoing review. Contact the vendors to obtain more information about affected products and fixes. " http://packetstormsecurity.org/0404-advisories/246929.html" NISCC Advisory 236929 - Vulnerability Issues in TCP details the vendor patch status as of the time of the advisory, and identifies resolutions and workarounds. Refer to "http://www.kb.cert.org/vuls/id/415294" US-CERT Vulnerability Note VU#415294 and "http://osvdb.org/4030" OSVDB Article 4030 to obtain a list of vendors affected by this issue and a note on resolutions (if any) provided by the vendor. For Microsoft: Refer to " https://docs.microsoft.com/en-us/security-updates/securitybulletins/2005/ms…" MS05-019 and " https://docs.microsoft.com/en-us/security-updates/securitybulletins/2006/ms…" MS06-064 for further details. For SGI IRIX: Refer to " ftp://patches.sgi.com/support/free/security/advisories/20040905-01-P.asc" SGI Security Advisory 20040905-01-P For SCO UnixWare 7.1.3 and 7.1.1: Refer to " ftp://ftp.sco.com/pub/updates/UnixWare/SCOSA-2005.14/SCOSA-2005.14.txt" SCO Security Advisory SCOSA-2005.14 For Solaris (Sun Microsystems): The vendor has acknowledged the vulnerability; however a patch is not available. Refer to "http://www.kb.cert.org/vuls/id/JARL-5YGQAJ" Sun Microsystems, Inc. Information for VU#415294 to obtain additional details. Also, refer to "http://www.us-cert.gov/cas/techalerts/TA04-111A.html" TA04-111A for detailed mitigating strategies against these attacks. For NetBSD: Refer to " ftp://ftp.netbsd.org/pub/NetBSD/security/advisories/NetBSD-SA2004-006.txt.a…" NetBSD-SA2004-006 For Cisco: Refer to " http://www.cisco.com/warp/public/707/cisco-sa-20040420-tcp-ios.shtml" cisco-sa-20040420-tcp-ios.shtml . For Red Hat Linux: There is no fix available. Workaround: The following BGP-specific workaround information has been provided. For BGP implementations that support it, the TCP MD5 Signature Option should be enabled. Passwords that the MD5 checksum is applied to should be set to strong values and changed on a regular basis. Secure BGP configuration instructions have been provided for Cisco and Juniper at these locations: " http://www.cymru.com/Documents/secure-bgp-template.html" Secure Cisco IOS BGP Template " http://www.cymru.com/gillsr/documents/junos-bgp-template.pdf" JUNOS Secure BGP Template Additional Information Tested on port 80 with an injected SYN/RST offset by 16 bytes. Please guide/suggest. Thanks in advance. Best Regards, Kaushal

2 2

domain configuration does not support video model 'qxl
by Sudheer S 13 Mar '22

13 Mar '22

Hello, Using libvirt and qemu, I am trying to install CentOS Stream 8 guest on CentOS Stream 9. I get this error: Unable to complete install: 'unsupported configuration: domain configuration does not support video model 'qxl'' Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/asyncjob.py", line 65, in cb_wrapper callback(asyncjob, *args, **kwargs) File "/usr/share/virt-manager/virtManager/createvm.py", line 2001, in _do_async_install installer.start_install(guest, meter=meter) File "/usr/share/virt-manager/virtinst/install/installer.py", line 701, in start_install domain = self._create_guest( File "/usr/share/virt-manager/virtinst/install/installer.py", line 649, in _create_guest domain = self.conn.createXML(install_xml or final_xml, 0) File "/usr/lib/python3/dist-packages/libvirt.py", line 4389, in createXML raise libvirtError('virDomainCreateXML() failed') libvirt.libvirtError: unsupported configuration: domain configuration does not support video model 'qxl' Am I missing any package? Or having a misconfiguration? - Sudheer

1 0

CentOS 9 and gtk-spice
by Joshua Kramer 11 Mar '22

11 Mar '22

Hello- Before I open a bug report on this, I wanted to ask if there is a specific reason that spice-gtk is not in the OS repositories of EL9? It looks like I have to install the ovirt repositories before I get access to spice-gtk and its dependencies. Thanks! -JK

2 1

Autoreply: "CentOS Digest, Vol 206, Issue 9"
by mak＠jump.com.hk 11 Mar '22

11 Mar '22

Thank you for your email. Vincent Mak is no longer working at Jump. Please do not hesitate to contact samantha(a)jump.com.hk or gary(a)jump.com.hk with any enquiry you have.

2 1

session-*.scope: Succeeded. messages in log
by Emmett Culley 10 Mar '22

10 Mar '22

I am seeing a "Mar 10 07:20:01 avm4 systemd[1]: session-66528.scope: Succeeded." message in the log that happens once each minute, of course with different session number values". What is causing this and how can I stop them. Linux avm4.mydomain.com 4.18.0-358.el8.x86_64 #1 SMP Mon Jan 10 13:11:20 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux CentOS Stream 8 I could cause logwatch to ignore them, but I would like to understand why three of my server are producing these unnecessary log entries. Emmett

1 0

Process owned by a user running after logout
by Hooton, Gerard 10 Mar '22

10 Mar '22

After logout, process owned by the logged out user keep running. If a user connects using ssh and then, without starting any programs, signs out the following processes remain running 4 S Tom 1808940 1 0 80 0 - 22440 do_epo 11:08 ? 00:00:00 /usr/lib/systemd/systemd --user 5 S Tom 1808943 1808940 0 80 0 - 75441 - 11:08 ? 00:00:00 (sd-pam) 0 S Tom 1809033 1 0 80 0 - 108596 x64_sy 11:08 ? 00:00:00 gio monitor -f /run/systemd/sessions/13496 0 S Tom 1809062 1808940 0 80 0 - 16095 do_epo 11:08 ? 00:00:00 /usr/bin/dbus-daemon --session --address=systemd: --nofork --nopidfile --systemd-activation --syslog-only This only applies to users who use ssh, when using the system console [Gnome 3 desktop] all processes own by a user stop when that user signs out. I have a number of users who use the computer for remote access and the number of these running process grows over a few weeks. I am using CentOS Stream 8. Kernel : 4.18.0-365.el8.x86_64 #1 SMP Thu Feb 10 16:11:23 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux

2 3

Autoreply: "CentOS Digest, Vol 206, Issue 7"
by mak＠jump.com.hk 07 Mar '22

07 Mar '22

Thank you for your email. Vincent Mak is no longer working at Jump. Please do not hesitate to contact samantha(a)jump.com.hk or gary(a)jump.com.hk with any enquiry you have.

1 0

Open source Pastebin service
by Kaushal Shriyan 07 Mar '22

07 Mar '22

Hi, Is there any open source Pastebin service that can be set up in the private LAN or Internal network? I am running CentOS Linux release 7.9.2009 (Core) in my internal LAN network. Thanks in advance. Best Regards, Kaushal

4 3

Autoreply: "CentOS Digest, Vol 206, Issue 5"
by mak＠jump.com.hk 05 Mar '22

05 Mar '22

Thank you for your email. Vincent Mak is no longer working at Jump. Please do not hesitate to contact samantha(a)jump.com.hk or gary(a)jump.com.hk with any enquiry you have.

1 0

vault.centos.org down
by Christopher Wensink 04 Mar '22

04 Mar '22

Is anyone else having issues getting to vault.centos.org right now? I'm getting connection timed out on the web page, but I can ping the server: $ ping vault.centos.org PING vault.centos.org (54.186.51.210) 56(84) bytes of data. 64 bytes from ec2-54-186-51-210.us-west-2.compute.amazonaws.com (54.186.51.210): icmp_seq=1 ttl=25 time=67.1 ms 64 bytes from ec2-54-186-51-210.us-west-2.compute.amazonaws.com (54.186.51.210): icmp_seq=2 ttl=25 time=66.6 ms 64 bytes from ec2-54-186-51-210.us-west-2.compute.amazonaws.com (54.186.51.210): icmp_seq=3 ttl=25 time=67.6 ms Chris -- Christopher Wensink IS Administrator Five Star Plastics, Inc 1339 Continental Drive Eau Claire, WI 54701 Office: 715-831-1682 Mobile: 715-563-3112 Fax: 715-831-6075 cwensink(a)five-star-plastics.com www.five-star-plastics.com

6 8

CentOS-announce Digest, Vol 203, Issue 1
by centos-announce-request＠centos.org 03 Mar '22

03 Mar '22

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2022:0666 Important CentOS 7 cyrus-sasl Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 2 Mar 2022 15:03:29 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:0666 Important CentOS 7 cyrus-sasl Security Update Message-ID: <20220302150329.GA5936(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:0666 Important Upstream details at : https://access.redhat.com/errata/RHSA-2022:0666 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 5a07757ffcab76dc74eef1e1537c4ea823f723bae2c05ab1dd29679d95478db1 cyrus-sasl-2.1.26-24.el7_9.i686.rpm 8180d23815951b3c5be397846577728116502dad35bbc2dd67b7c4188244e465 cyrus-sasl-2.1.26-24.el7_9.x86_64.rpm cf7edef3f54d6a2816515812d2f679ae21bbfb26767bf64e34b73d19a3bce3ae cyrus-sasl-devel-2.1.26-24.el7_9.i686.rpm b2e43341cc469f66b5495139b62a419c0c671b19535efcdc79df055cc43686e5 cyrus-sasl-devel-2.1.26-24.el7_9.x86_64.rpm 46f713cd31041330e2739c5a644e4f598536096f3e39d6c667a6d044eaa87893 cyrus-sasl-gs2-2.1.26-24.el7_9.i686.rpm da2b0ffc968803d239f38444842e6792e85494901ff8d0075652f6c2d7aa1800 cyrus-sasl-gs2-2.1.26-24.el7_9.x86_64.rpm c75dd0b94b1e1300b04edfbfa5a3739573a6f83dc0737110d2f8cfedfc5ab7a2 cyrus-sasl-gssapi-2.1.26-24.el7_9.i686.rpm 816c816facf8421458376b99f244ef91c147063ed4f4955fd0e8dae62eccaeb8 cyrus-sasl-gssapi-2.1.26-24.el7_9.x86_64.rpm 46ac94286722fc2f6f68ec4c0e70152b3d1ff6fac6001d2155f8228d91126574 cyrus-sasl-ldap-2.1.26-24.el7_9.i686.rpm 4a53adae3dd3a8d933f2ec113b7303ce7d9c782edd612d17b8d3badf4c04167e cyrus-sasl-ldap-2.1.26-24.el7_9.x86_64.rpm 4579c7a7925097881dd33b28c72cce227a024a5f071fa4cd0c5bb09cd76d8ec0 cyrus-sasl-lib-2.1.26-24.el7_9.i686.rpm e1d065bfaef705d407c6134352d1afc64ecf26a5970a0e5282f6dda745483db8 cyrus-sasl-lib-2.1.26-24.el7_9.x86_64.rpm ffcf7016d990141a16d89aca74ebc89f797e93581bb8c97a08c83f5bf4ae47e4 cyrus-sasl-md5-2.1.26-24.el7_9.i686.rpm c92bf980488dff6128c5564f2f75712ccb2a9a0f859f4667af435f967eef4c45 cyrus-sasl-md5-2.1.26-24.el7_9.x86_64.rpm 94d6c80d9b08af719fa8a5e007bf753a3f13406d99bcd8411d914c6115c3b571 cyrus-sasl-ntlm-2.1.26-24.el7_9.i686.rpm 995c318e872c57fa7ce17355320c34d3fdd0774343e691cc23d9e9215ad53931 cyrus-sasl-ntlm-2.1.26-24.el7_9.x86_64.rpm 5a42bda7621305ca3bcd588a0c84aac743aba372ea8ee558945564b62173e3f3 cyrus-sasl-plain-2.1.26-24.el7_9.i686.rpm c960158be24b783ab7fb4a317899b83f806692c1e48426fe46c6bee909357ee5 cyrus-sasl-plain-2.1.26-24.el7_9.x86_64.rpm 925078e3fe326e7212b074bf495287d0fafc0395d9657b439a01b27d1539037e cyrus-sasl-scram-2.1.26-24.el7_9.i686.rpm 4fc0e17577976ecf2487198134b9f2656bdc36caf8e27c75efb6aff14204088e cyrus-sasl-scram-2.1.26-24.el7_9.x86_64.rpm b1fa72dca82442418098746eaa9881ac7e92678c41e6786a458c28d77235fd5e cyrus-sasl-sql-2.1.26-24.el7_9.i686.rpm 9fc8f4ae81c019b16a882823948eff561fe0f6ad38be509f514a5c287a60d121 cyrus-sasl-sql-2.1.26-24.el7_9.x86_64.rpm Source: c49472bd08c6060f53a9dace005b81cf466836790d2dcb407a536820f6319e77 cyrus-sasl-2.1.26-24.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 203, Issue 1 ***********************************************

1 0

Need fstab-decode for CentOS 8
by Robert Nichols 02 Mar '22

02 Mar '22

Does anything for CentOS 8 provide the function of the fstab-decode utility? Entries in /proc/mounts and /etc/fstab can have escape sequences for certain special characters, and I need to decode that. -- Bob Nichols "NOSPAM" is really part of my email address. Do NOT delete it.

3 11

Autoreply: "CentOS Digest, Vol 206, Issue 2"
by mak＠jump.com.hk 02 Mar '22

02 Mar '22

Thank you for your email. Vincent Mak is no longer working at Jump. Please do not hesitate to contact samantha(a)jump.com.hk or gary(a)jump.com.hk with any enquiry you have.

1 0

mock gimmicks - experts?
by lejeczek 01 Mar '22

01 Mar '22

Hi guys. I'm trying something I believe is trivial, on centOS 9 with mock version 2.16 -> $ mock -r centos-stream-8-x86_64 --rootdir=~/mock --localrepo=/00.STORAGE/1/var/www/repos --continue --chain ./mpfr-4.1.0-7.el9.src.rpm ./libmpc-1.2.1-4.el9.src.rpm ... CentOS Stream 8 - PowerTools 14 kB/s | 4.4 kB 00:00 Error: Problem: cannot install the best update candidate for package libmpc-1.1.0-9.1.el8.x86_64 - problem with installed package libmpc-1.1.0-9.1.el8.x86_64 - package libmpc-1.1.0-9.1.el8.x86_64 requires libmpfr.so.4()(64bit), but none of the providers can be installed - cannot install the best update candidate for package mpfr-3.1.6-1.el8.x86_64 - cannot install both mpfr-4.1.0-7.el8.x86_64 and mpfr-3.1.6-1.el8.x86_64 - cannot install both mpfr-3.1.6-1.el8.x86_64 and mpfr-4.1.0-7.el8.x86_64 (try to add '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages) ERROR: Exception(./libmpc-1.2.1-4.el9.src.rpm) Config(centos-stream-8-x86_64) 0 minutes 6 seconds INFO: Results and/or logs in: /00.STORAGE/1/var/www/repos/results/centos-stream-8-x86_64/libmpc-1.2.1-4.el9 ERROR: Command failed: ... Why would it end up asking for 'mpfr-3.1.6' if 'libmpc-1.2.1' requires ver. >4.x and.. why would 'ibmpc-1.1.0-9.1' even show up there I cannot wrap my head around it. I've only started using 'mock' but this weird stuff have not seen until now. many thanks, L.

2 3

Autoreply: "CentOS Digest, Vol 205, Issue 24"
by mak＠jump.com.hk 28 Feb '22

28 Feb '22

Thank you for your email. Vincent Mak is no longer working at Jump. Please do not hesitate to contact samantha(a)jump.com.hk or gary(a)jump.com.hk with any enquiry you have.

1 0

CentOS-announce Digest, Vol 202, Issue 5
by centos-announce-request＠centos.org 26 Feb '22

26 Feb '22

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2022:0666 Important CentOS 7 cyrus-sasl Security Update (Johnny Hughes) 2. CEBA-2022:0518 CentOS 7 java-11-openjdk BugFix Update (Johnny Hughes) 3. CEBA-2022:0616 CentOS 7 sos BugFix Update (Johnny Hughes) 4. CEBA-2022:0624 CentOS 7 bind BugFix Update (Johnny Hughes) 5. CEBA-2022:0625 CentOS 7 resource-agents BugFix Update (Johnny Hughes) 6. CEBA-2022:0627 CentOS 7 sssd BugFix Update (Johnny Hughes) 7. CESA-2022:0628 Low CentOS 7 389-ds-base Security Update (Johnny Hughes) 8. CESA-2022:0621 Moderate CentOS 7 openldap Security Update (Johnny Hughes) 9. CEBA-2022:0619 CentOS 7 ipmitool BugFix Update (Johnny Hughes) 10. CEBA-2022:0626 CentOS 7 cloud-init BugFix Update (Johnny Hughes) 11. CEBA-2022:0617 CentOS 7 mdadm BugFix Update (Johnny Hughes) 12. CEBA-2022:0623 CentOS 7 redhat-support-tool BugFix Update (Johnny Hughes) 13. CEBA-2022:0623 CentOS 7 redhat-support-lib-python BugFix Update (Johnny Hughes) 14. CESA-2022:0609 Important CentOS 7 python-pillow Security Update (Johnny Hughes) 15. CESA-2022:0620 Important CentOS 7 kernel Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Fri, 25 Feb 2022 15:31:36 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:0666 Important CentOS 7 cyrus-sasl Security Update Message-ID: <20220225153136.GA465(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:0666 Important Upstream details at : https://access.redhat.com/errata/RHSA-2022:0666 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 5a07757ffcab76dc74eef1e1537c4ea823f723bae2c05ab1dd29679d95478db1 cyrus-sasl-2.1.26-24.el7_9.i686.rpm 8180d23815951b3c5be397846577728116502dad35bbc2dd67b7c4188244e465 cyrus-sasl-2.1.26-24.el7_9.x86_64.rpm cf7edef3f54d6a2816515812d2f679ae21bbfb26767bf64e34b73d19a3bce3ae cyrus-sasl-devel-2.1.26-24.el7_9.i686.rpm b2e43341cc469f66b5495139b62a419c0c671b19535efcdc79df055cc43686e5 cyrus-sasl-devel-2.1.26-24.el7_9.x86_64.rpm 46f713cd31041330e2739c5a644e4f598536096f3e39d6c667a6d044eaa87893 cyrus-sasl-gs2-2.1.26-24.el7_9.i686.rpm da2b0ffc968803d239f38444842e6792e85494901ff8d0075652f6c2d7aa1800 cyrus-sasl-gs2-2.1.26-24.el7_9.x86_64.rpm c75dd0b94b1e1300b04edfbfa5a3739573a6f83dc0737110d2f8cfedfc5ab7a2 cyrus-sasl-gssapi-2.1.26-24.el7_9.i686.rpm 816c816facf8421458376b99f244ef91c147063ed4f4955fd0e8dae62eccaeb8 cyrus-sasl-gssapi-2.1.26-24.el7_9.x86_64.rpm 46ac94286722fc2f6f68ec4c0e70152b3d1ff6fac6001d2155f8228d91126574 cyrus-sasl-ldap-2.1.26-24.el7_9.i686.rpm 4a53adae3dd3a8d933f2ec113b7303ce7d9c782edd612d17b8d3badf4c04167e cyrus-sasl-ldap-2.1.26-24.el7_9.x86_64.rpm 4579c7a7925097881dd33b28c72cce227a024a5f071fa4cd0c5bb09cd76d8ec0 cyrus-sasl-lib-2.1.26-24.el7_9.i686.rpm e1d065bfaef705d407c6134352d1afc64ecf26a5970a0e5282f6dda745483db8 cyrus-sasl-lib-2.1.26-24.el7_9.x86_64.rpm ffcf7016d990141a16d89aca74ebc89f797e93581bb8c97a08c83f5bf4ae47e4 cyrus-sasl-md5-2.1.26-24.el7_9.i686.rpm c92bf980488dff6128c5564f2f75712ccb2a9a0f859f4667af435f967eef4c45 cyrus-sasl-md5-2.1.26-24.el7_9.x86_64.rpm 94d6c80d9b08af719fa8a5e007bf753a3f13406d99bcd8411d914c6115c3b571 cyrus-sasl-ntlm-2.1.26-24.el7_9.i686.rpm 995c318e872c57fa7ce17355320c34d3fdd0774343e691cc23d9e9215ad53931 cyrus-sasl-ntlm-2.1.26-24.el7_9.x86_64.rpm 5a42bda7621305ca3bcd588a0c84aac743aba372ea8ee558945564b62173e3f3 cyrus-sasl-plain-2.1.26-24.el7_9.i686.rpm c960158be24b783ab7fb4a317899b83f806692c1e48426fe46c6bee909357ee5 cyrus-sasl-plain-2.1.26-24.el7_9.x86_64.rpm 925078e3fe326e7212b074bf495287d0fafc0395d9657b439a01b27d1539037e cyrus-sasl-scram-2.1.26-24.el7_9.i686.rpm 4fc0e17577976ecf2487198134b9f2656bdc36caf8e27c75efb6aff14204088e cyrus-sasl-scram-2.1.26-24.el7_9.x86_64.rpm b1fa72dca82442418098746eaa9881ac7e92678c41e6786a458c28d77235fd5e cyrus-sasl-sql-2.1.26-24.el7_9.i686.rpm 9fc8f4ae81c019b16a882823948eff561fe0f6ad38be509f514a5c287a60d121 cyrus-sasl-sql-2.1.26-24.el7_9.x86_64.rpm Source: c49472bd08c6060f53a9dace005b81cf466836790d2dcb407a536820f6319e77 cyrus-sasl-2.1.26-24.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Fri, 25 Feb 2022 15:32:48 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2022:0518 CentOS 7 java-11-openjdk BugFix Update Message-ID: <20220225153248.GA791(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2022:0518 Upstream details at : https://access.redhat.com/errata/RHBA-2022:0518 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 17ed16fa6fa0dce15c8b3485e9d01613b70ef05e54ce42b4ead591c57c7f47aa java-11-openjdk-11.0.14.1.1-1.el7_9.i686.rpm 9b6758993720f8e305448717bc270151ffeedba84a7961f0c5e110065eb6f188 java-11-openjdk-11.0.14.1.1-1.el7_9.x86_64.rpm 91265a7a7ea601e581e1e9d0927369baa2509184619fcbfe483ba909db979caa java-11-openjdk-demo-11.0.14.1.1-1.el7_9.i686.rpm 6afa89d1f93f0c18b712d80864bb7c05453680e7c2ef4267277d1a05fc5f3ed5 java-11-openjdk-demo-11.0.14.1.1-1.el7_9.x86_64.rpm 5dc4485c972bd78d1637297056bbcc819f90e800c1681f449d5ab226d2b8772b java-11-openjdk-devel-11.0.14.1.1-1.el7_9.i686.rpm b1355c30321cdcfe6f3fc6298e8e7995196ed2edc8127aa23cee6fb0def56d65 java-11-openjdk-devel-11.0.14.1.1-1.el7_9.x86_64.rpm d24b5e95b20420b1e37b28037c9bd5175c6fbfd17e6a78347fb26b2792a126ef java-11-openjdk-headless-11.0.14.1.1-1.el7_9.i686.rpm d5fa6533d980b7889d1404f6dda42ce2de80411d4079bd78b7ce3257cb36e5de java-11-openjdk-headless-11.0.14.1.1-1.el7_9.x86_64.rpm 4521dde116f75afbb70beca46c5f369e56507e92501cb8051a6caf5aebe62def java-11-openjdk-javadoc-11.0.14.1.1-1.el7_9.i686.rpm efa7cbf450462d4d95389173c50afbb6786eb202258fbc8ba90ef57e2459561a java-11-openjdk-javadoc-11.0.14.1.1-1.el7_9.x86_64.rpm 7bfed40726a8044b0f0685487bd9f5131499f3c91242720ec1c55565601abd18 java-11-openjdk-javadoc-zip-11.0.14.1.1-1.el7_9.i686.rpm b5bacd96f28f126743bbc0807bcb665ff0c52ee4b0256b7bcffb9a10f8d18c68 java-11-openjdk-javadoc-zip-11.0.14.1.1-1.el7_9.x86_64.rpm 83d5e8fcf034f22af47eccbbd1c693274a94cfc7afdec007e5cebcb5d3ed2a73 java-11-openjdk-jmods-11.0.14.1.1-1.el7_9.i686.rpm b82ab048b9697892096528f61737d1713449b0dfdae049f4533ac7d1e469ad0e java-11-openjdk-jmods-11.0.14.1.1-1.el7_9.x86_64.rpm e2d9e1fc46982332f4c50e35b6e51f62edc6bd78156642b63e2553d404909efa java-11-openjdk-src-11.0.14.1.1-1.el7_9.i686.rpm e3d2e4fe4672614c07f199cf8ea78ca12ec2e4c5bfee735cbffb6dca84ba91cd java-11-openjdk-src-11.0.14.1.1-1.el7_9.x86_64.rpm e0d5c3c3503d52c16cbaa1ee54130af69d4b939561a49a2a1591e2049fd69279 java-11-openjdk-static-libs-11.0.14.1.1-1.el7_9.i686.rpm 6b0e694fe0bd25769497d03ebe96ad15e93d707736bcee6eb8e89bae4d0f77c1 java-11-openjdk-static-libs-11.0.14.1.1-1.el7_9.x86_64.rpm Source: 4b5f866ca2edc5e67a55035193d83186f769979106690b8a32ce5cd36691015b java-11-openjdk-11.0.14.1.1-1.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 3 Date: Fri, 25 Feb 2022 15:32:58 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2022:0616 CentOS 7 sos BugFix Update Message-ID: <20220225153258.GA982(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2022:0616 Upstream details at : https://access.redhat.com/errata/RHBA-2022:0616 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 1c844415d79cf4e5509e9b7ea70274ecad4b7e52cd6d0810f0df2dda40106afc sos-3.9-5.el7.centos.10.noarch.rpm Source: 404eccee87cdcfd21706574ec515cf188c8a1f97fff169e2e2edc2cde1781caa sos-3.9-5.el7.centos.10.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 4 Date: Fri, 25 Feb 2022 15:33:57 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2022:0624 CentOS 7 bind BugFix Update Message-ID: <20220225153357.GA1298(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2022:0624 Upstream details at : https://access.redhat.com/errata/RHBA-2022:0624 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 42b68ad1d87236d5de03de1b7d591b6a993c1067b4bb54558ceaa48a68fff9e1 bind-9.11.4-26.P2.el7_9.9.x86_64.rpm 42ff9328e94163ac1555369afb66d510954eee171420041d8a4d8bcf504fe3f8 bind-chroot-9.11.4-26.P2.el7_9.9.x86_64.rpm 1039cd93e11117af53816432e691fa32ce9f5c6aef8a37f44ed3c7b1291ba097 bind-devel-9.11.4-26.P2.el7_9.9.i686.rpm 7e64442436c5c1978be36615d69bc4f59a79cef4c9a5819e922bc16f290cdc13 bind-devel-9.11.4-26.P2.el7_9.9.x86_64.rpm 56cdf3051f5fd87ff809ab1843192abe235c6093bc0a83213f73bb7ebe2a0f2a bind-export-devel-9.11.4-26.P2.el7_9.9.i686.rpm bd09bb37e73e22a5b20339a2eafaa7a10698dd1ebf5a8bf4c187d59b68d06a60 bind-export-devel-9.11.4-26.P2.el7_9.9.x86_64.rpm ebf8758838f5dc246c98cc6f76706eafa07a5083df17f4fbfa2489df5db98458 bind-export-libs-9.11.4-26.P2.el7_9.9.i686.rpm 33233f04e60e9c664a7bf40da5737db125bcf521206e43d06261d80d1b4babe3 bind-export-libs-9.11.4-26.P2.el7_9.9.x86_64.rpm dca184c57d0913cdde1f9f39c446f2cad1f8daa197d290e0f0ee296dc3b345da bind-libs-9.11.4-26.P2.el7_9.9.i686.rpm 3d75be4567f3055d6aa45834620c4fdab40240d0eac958aa3b5401832cf284bb bind-libs-9.11.4-26.P2.el7_9.9.x86_64.rpm 5105577688287233ec925ee639d92524c00f6f7490e2c5501c49eeb0f07cd511 bind-libs-lite-9.11.4-26.P2.el7_9.9.i686.rpm 46f776adf7f88106a8e818889463dd616d261bb3462ec68346857a126aee742e bind-libs-lite-9.11.4-26.P2.el7_9.9.x86_64.rpm ef23d81c590cbf657f32525eaf60a72a65cac4272b7cfa37677546ee5204deb1 bind-license-9.11.4-26.P2.el7_9.9.noarch.rpm 3997f8bf7bec69e2b9fc0ff0a33790347a77cd30140b40f7b9a36ae91591d36e bind-lite-devel-9.11.4-26.P2.el7_9.9.i686.rpm f59dc733e2e61cc262d571504ef9b62561aab27935f5cc432e2109e165936dac bind-lite-devel-9.11.4-26.P2.el7_9.9.x86_64.rpm 913377ddeda7e9a87688016fb775cfe7ac678ed7b17cab277996497a766e6c67 bind-pkcs11-9.11.4-26.P2.el7_9.9.x86_64.rpm c0a3bcd41e5beba5e539861177a8ed67f9626d4b21b11ab1b621770a53bf3137 bind-pkcs11-devel-9.11.4-26.P2.el7_9.9.i686.rpm 0f0f20e5079748f9103ff3e0068108043ec9079822de5e46263c2c1f09b6dc0d bind-pkcs11-devel-9.11.4-26.P2.el7_9.9.x86_64.rpm 9e951fe6f09cc5cf1402211e1232a2a92d029d66404daf66003bfc285052a41d bind-pkcs11-libs-9.11.4-26.P2.el7_9.9.i686.rpm 1c0761e63af4f982fec4bf5ddbda7da44c1f6472883839db48386eaaac902785 bind-pkcs11-libs-9.11.4-26.P2.el7_9.9.x86_64.rpm 11e7a9eb9ad854ce3901deb76ff9ab3e462f87d56766b9cda133c1fbcc89d812 bind-pkcs11-utils-9.11.4-26.P2.el7_9.9.x86_64.rpm 4552c0e9031fc5f990a165feb17e2cd243461f760cb80e75769c837d1052f193 bind-sdb-9.11.4-26.P2.el7_9.9.x86_64.rpm 74038c223561306541466c5407569dcc8055567f3cc9a56e7ec106015d2df942 bind-sdb-chroot-9.11.4-26.P2.el7_9.9.x86_64.rpm ad525efce24792177db9c59af54a5822206dc0ec6f5b18770062ca07e51ac4ca bind-utils-9.11.4-26.P2.el7_9.9.x86_64.rpm Source: 559f87ad1831a9d2f59e277ebb813e24f8491ae79c16084707f65bcabcbfad43 bind-9.11.4-26.P2.el7_9.9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 5 Date: Fri, 25 Feb 2022 15:34:13 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2022:0625 CentOS 7 resource-agents BugFix Update Message-ID: <20220225153413.GA1420(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2022:0625 Upstream details at : https://access.redhat.com/errata/RHBA-2022:0625 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: cd0ee0b99212979ff9dd5d920ddf6f8d82ee56bbc646f1e3c3b7e62a102b1186 resource-agents-4.1.1-61.el7_9.15.x86_64.rpm d2d500ea0189e3f9d7f6ce3102af96d24e0a9a06f89ce42f89346c33e7d48100 resource-agents-aliyun-4.1.1-61.el7_9.15.x86_64.rpm ce2b479d726968ea27bfbfd9dc3bf20a2ef62e6ab1f4d3b4a0e6d4230a9ef0ec resource-agents-gcp-4.1.1-61.el7_9.15.x86_64.rpm Source: c58ee4d67b39ba27fbb2f992f1234d67b80e0145b830513d3a3572aa7fa2a593 resource-agents-4.1.1-61.el7_9.15.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 6 Date: Fri, 25 Feb 2022 15:36:14 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2022:0627 CentOS 7 sssd BugFix Update Message-ID: <20220225153614.GA1949(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2022:0627 Upstream details at : https://access.redhat.com/errata/RHBA-2022:0627 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 1e9ecb13d56ad5c7fa67acece7a0f89c452b11bad3fc66a7589eb57a67fdb766 libipa_hbac-1.16.5-10.el7_9.12.i686.rpm a4ed3b8d30ed584009accf96a7436d098f14e555ae10c804f398816146a347e6 libipa_hbac-1.16.5-10.el7_9.12.x86_64.rpm b4bb4d388af0708a559cf09c5a7fc75ab89a349115729620b72c790f28e7422e libipa_hbac-devel-1.16.5-10.el7_9.12.i686.rpm 07b1856027333bf98a662c1c5c7b92d2391deb1108f57f3ca5b27d6ee192f7a0 libipa_hbac-devel-1.16.5-10.el7_9.12.x86_64.rpm 5acff1ca859e33437e5bba88b3f8e1335360828b81bf51c413327aa84347242d libsss_autofs-1.16.5-10.el7_9.12.x86_64.rpm 8d73e99ddd2060604e1a2bddc4b10b1b92cf6f81b0d2a05a103cebd6d052a316 libsss_certmap-1.16.5-10.el7_9.12.i686.rpm 7d44f440dcfa707ff7ed627fb7b3fb3254742dcf60373b386105ea09f4e14293 libsss_certmap-1.16.5-10.el7_9.12.x86_64.rpm b9cdab2c69719f6bbf7b533475859fb6f47e37976e9c3f8dc8235fb67f98c995 libsss_certmap-devel-1.16.5-10.el7_9.12.i686.rpm 13c6b2ac5e5019a9debc589efedb039c95513584922436476bdc65f0fa84b5e8 libsss_certmap-devel-1.16.5-10.el7_9.12.x86_64.rpm 4eb469f0ca30f89921cee1b76ff6dd7b1c0025256c9be1d13e2d2c4dfbb1b927 libsss_idmap-1.16.5-10.el7_9.12.i686.rpm a28c0efdadc06bf5a7278211745c542df980210b991db1532357b48d09b0e233 libsss_idmap-1.16.5-10.el7_9.12.x86_64.rpm 08eccef6a2ce6a06f95c7ad30f3fdd7db91e89b3991bbe05cc786dee1ccc9074 libsss_idmap-devel-1.16.5-10.el7_9.12.i686.rpm bd426d0e03bbd097435638bf127e0f1c2cd5e3fbaa1161378173491fadba6adb libsss_idmap-devel-1.16.5-10.el7_9.12.x86_64.rpm 26e499c5c940c85a9dc99a8198b266b67825eeb218071c6b6d0848d7e3ba9b92 libsss_nss_idmap-1.16.5-10.el7_9.12.i686.rpm bc347437d264c256ccfc842e7dd7fc5bfc2649f300c61c63b59dc2676631e404 libsss_nss_idmap-1.16.5-10.el7_9.12.x86_64.rpm 4110581b81ae9c5b81888451ef2d92b364bd02c2919a96ed2f541d4b690b1932 libsss_nss_idmap-devel-1.16.5-10.el7_9.12.i686.rpm cb8ea18480b29a851f5294a367ac6b15344338149139ef7f7230a7888c960c7d libsss_nss_idmap-devel-1.16.5-10.el7_9.12.x86_64.rpm 57060ad1d840d5c5b714fe83a3d14486758cf9d186bea54eeb40b00a53427f02 libsss_simpleifp-1.16.5-10.el7_9.12.i686.rpm 87fe3fb7cde1d8eee7a0811446e9f57ce979666bc9e6e29ac3cc9efc60d86d02 libsss_simpleifp-1.16.5-10.el7_9.12.x86_64.rpm 3494247306924b94b55f3da45af759539e2b9710c85996ca25ee2b838ccaf8d9 libsss_simpleifp-devel-1.16.5-10.el7_9.12.i686.rpm c5cb7460760e2885f04cef6e4c190e295bc38c25d8654fc325e8b08c5f835ffd libsss_simpleifp-devel-1.16.5-10.el7_9.12.x86_64.rpm 7d581bf8155fdcfdd7570ca3bd524e4ab64b42a8bcbfe776cc2d97ca9fd25264 libsss_sudo-1.16.5-10.el7_9.12.x86_64.rpm 0fb81dae84cc52ddf4eb6a080d15e4a750ae48a9057d60e0322152493282eab8 python-libipa_hbac-1.16.5-10.el7_9.12.x86_64.rpm 08d77e2a53f45806fd7b82661a7ef4d17bedadab7f9241768695eafd2d8f6cf0 python-libsss_nss_idmap-1.16.5-10.el7_9.12.x86_64.rpm e5bbff1b2c6d054cc79f530eb0647fb1a04ec02c79c456548c0d9082b4d41037 python-sss-1.16.5-10.el7_9.12.x86_64.rpm e29dd1c6d36379f2cd4d51b34af58306f6334f7eef664b48361f0e5833bb90a7 python-sssdconfig-1.16.5-10.el7_9.12.noarch.rpm 463481903ff9ac36f08f2d63e5bce0da7c84afc7274e5f35ea4d39f73cc6873e python-sss-murmur-1.16.5-10.el7_9.12.x86_64.rpm 3579555a0a1408bf0ffc0c41aa84d2045a42a0fc9536c5b03f837ea3080086a2 sssd-1.16.5-10.el7_9.12.x86_64.rpm 9d64772c1a50450f231fb3e75179eecc94b9aa1ff2a18fe00a4322da5b873623 sssd-ad-1.16.5-10.el7_9.12.x86_64.rpm 3f9b0f657dd2581e1dd7b33d31ff3179c309539c7fadc4275ca679411bbd4f7d sssd-client-1.16.5-10.el7_9.12.i686.rpm 4abd16c4ab5141d33e867b7f35275398808b6ec6c8b49a01a8fe2836089ca1ed sssd-client-1.16.5-10.el7_9.12.x86_64.rpm 4501c2327452af05f97c309a9269b764df7c26f9118e1c6cc2594f1660aefb89 sssd-common-1.16.5-10.el7_9.12.x86_64.rpm 00685f713fa548fd7e60ef95a370789739c4ef8bf55c1102f6d251548a251ed2 sssd-common-pac-1.16.5-10.el7_9.12.x86_64.rpm 8a5fd0b970dc3eb282790ae8ea380ab02a73599a63846085865e041e8624d19b sssd-dbus-1.16.5-10.el7_9.12.x86_64.rpm f1543bd7c42d040f29b768234c950b37aba8c48f0e6347079bc3d83cd152f2b5 sssd-ipa-1.16.5-10.el7_9.12.x86_64.rpm f30bed050378d0ff2aec7c2fe523d1b6505bc116cce61a59687efe5e1d2a0014 sssd-kcm-1.16.5-10.el7_9.12.x86_64.rpm 9a755fccab500090f9f294ce722c9245f42f0f67ffbc27667a08f8c94f0e706b sssd-krb5-1.16.5-10.el7_9.12.x86_64.rpm fdc3d5723bc3c1ed88713853d0c264f40ff05adf61533cdf99fc13598c015d19 sssd-krb5-common-1.16.5-10.el7_9.12.x86_64.rpm a8405254acf23fb0843ab4e7c57f3684eb7ec1a6feb932b5dd00185927c7d7ad sssd-ldap-1.16.5-10.el7_9.12.x86_64.rpm 5a97b7da594519145c772a191ec16781f3e65f7befa1cb1697ae9bae09c6be3e sssd-libwbclient-1.16.5-10.el7_9.12.x86_64.rpm 250a28dac3da0fc3f250e7d3e7690254c46a1dd5d2663f2573ba5efdae5e0909 sssd-libwbclient-devel-1.16.5-10.el7_9.12.i686.rpm ecfb16cf527793f6ec8118a181cf88df17babbdd3805563e4cd5e75bfa4846d1 sssd-libwbclient-devel-1.16.5-10.el7_9.12.x86_64.rpm 90ee404ae7f217e125818a3a078d8727a3d722574a1fe488df803a8e74e702b8 sssd-polkit-rules-1.16.5-10.el7_9.12.x86_64.rpm 67a0b1ce4f650123760a584297eade73a87e8a5cd69ee80b0de1e46c6734c7e0 sssd-proxy-1.16.5-10.el7_9.12.x86_64.rpm bac160608046f1b8a53fee2478c1cf5eacbd98780405257d17db4aa0e88221e9 sssd-tools-1.16.5-10.el7_9.12.x86_64.rpm 31a00a78690dbd25c399c0d6dc257233ed9c90313969f69bafac3ab599e0a3f5 sssd-winbind-idmap-1.16.5-10.el7_9.12.x86_64.rpm Source: d052db77060fdb43605dd154465bd4594829a70a46cc74a37b325134bbf1e362 sssd-1.16.5-10.el7_9.12.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 7 Date: Fri, 25 Feb 2022 15:36:34 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:0628 Low CentOS 7 389-ds-base Security Update Message-ID: <20220225153634.GA2082(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:0628 Low Upstream details at : https://access.redhat.com/errata/RHSA-2022:0628 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: a4b372b0da7c95c62540dcfd5049d2b4cd05abf59cb373d2a9a94bcdce3472c3 389-ds-base-1.3.10.2-15.el7_9.x86_64.rpm 2cfc157959dd7203260a2f727d8590878e5ebaf061e1f17210e36684e46916d4 389-ds-base-devel-1.3.10.2-15.el7_9.x86_64.rpm 9e9a8ce7cbf019108675746a5f67d8ff853fb0b97c72cbd0f4d38b6dad0c96b7 389-ds-base-libs-1.3.10.2-15.el7_9.x86_64.rpm fe57c2235944b61957f96287d962dc8a6f63af33aa9a45b6bff9fc30a34862f5 389-ds-base-snmp-1.3.10.2-15.el7_9.x86_64.rpm Source: f1ec0c69e1b6123f313a343fb10d4fe8241c5856a1eadf7cd818c1777da29cf2 389-ds-base-1.3.10.2-15.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 8 Date: Fri, 25 Feb 2022 15:36:55 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:0621 Moderate CentOS 7 openldap Security Update Message-ID: <20220225153655.GA2239(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:0621 Moderate Upstream details at : https://access.redhat.com/errata/RHSA-2022:0621 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 7dc75ff8c8c8c6b5a6b9fc8c0b75b9ddaaaff8045fabbd17663a334c27c8b9cb openldap-2.4.44-25.el7_9.i686.rpm a41884a9bea64c478434afa440f59ad7fb2b3251861261bfa51c4a6142be01f3 openldap-2.4.44-25.el7_9.x86_64.rpm bc3ad50d23ee3913b90b02ecb46fe4404d8bee5abbbce1bcd8310b15ba6abf16 openldap-clients-2.4.44-25.el7_9.x86_64.rpm 5f4ca284587783143968fcdf3917477a4d6a68b7e9106aa1c96b92591e63a261 openldap-devel-2.4.44-25.el7_9.i686.rpm 39ac6caf2f744acfdea88f8f05d08f1cc0f3ead1b5cc458a36db4d7d5553972f openldap-devel-2.4.44-25.el7_9.x86_64.rpm ecbcdfc04b53ea64ad8edb3e42271b75385cb3a6087173d58c0d0e9ac5074c56 openldap-servers-2.4.44-25.el7_9.x86_64.rpm 8c1a2436bb9993077d1787d888e9de96eb7d1ce37e361e8ed8f64c131ab0b58e openldap-servers-sql-2.4.44-25.el7_9.x86_64.rpm Source: 0940a8328082a0e31fa66fa445e00ceed3b0b193619dbe1712371296fbd89583 openldap-2.4.44-25.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 9 Date: Fri, 25 Feb 2022 15:37:10 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2022:0619 CentOS 7 ipmitool BugFix Update Message-ID: <20220225153710.GA2355(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2022:0619 Upstream details at : https://access.redhat.com/errata/RHBA-2022:0619 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: f17b58dd383483f1592c8c3c0bf814ed80d208d19a254620ec541a14c9f5f144 bmc-snmp-proxy-1.8.18-10.el7_9.noarch.rpm a52fbf59e2e7f8b7b912ee6fd5be7c84450b3ab1d4cb68690cfc3f306086b817 exchange-bmc-os-info-1.8.18-10.el7_9.noarch.rpm 46fcca6c6687e1d7465d0f99ea219de21f84bde74cc822721a5e55a13bf97a0c ipmitool-1.8.18-10.el7_9.x86_64.rpm Source: 142da5c1fe71abc60870d87656b9894d94cea3d1a01b1863d14b1f95e92dcc7f ipmitool-1.8.18-10.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 10 Date: Fri, 25 Feb 2022 15:37:18 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2022:0626 CentOS 7 cloud-init BugFix Update Message-ID: <20220225153718.GA2460(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2022:0626 Upstream details at : https://access.redhat.com/errata/RHBA-2022:0626 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: bbe893457383d81228467a2e58df9d5f1d18cbfd30d4cd35b2c717dc660133b7 cloud-init-19.4-7.el7.centos.6.x86_64.rpm Source: bfd230ff659493611aa076e11b11232ccb1a9b2a2684c44616adb4879a828ecb cloud-init-19.4-7.el7.centos.6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 11 Date: Fri, 25 Feb 2022 15:37:25 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2022:0617 CentOS 7 mdadm BugFix Update Message-ID: <20220225153725.GA2549(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2022:0617 Upstream details at : https://access.redhat.com/errata/RHBA-2022:0617 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 222af4af29ee9e4dea368547514867dd1734fdc205d9dc9b484dd99e567f4d75 mdadm-4.1-9.el7_9.x86_64.rpm Source: 852f267e480f812900f4d86636efbbbca88d8a216174850a22111378b5826636 mdadm-4.1-9.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 12 Date: Fri, 25 Feb 2022 15:37:33 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2022:0623 CentOS 7 redhat-support-tool BugFix Update Message-ID: <20220225153733.GA2640(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2022:0623 Upstream details at : https://access.redhat.com/errata/RHBA-2022:0623 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 6800883f09c022594a86d5e180d107e71cc758c3f5f307af8b151a36b1f98818 redhat-support-tool-0.13.0-0.el7_9.noarch.rpm Source: 9d8d22599fbf50c7fa8ed83ae55fb1cb4f410ceb6127e82a5cf43ae97fcbf5c4 redhat-support-tool-0.13.0-0.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 13 Date: Fri, 25 Feb 2022 15:37:41 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2022:0623 CentOS 7 redhat-support-lib-python BugFix Update Message-ID: <20220225153741.GA2732(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2022:0623 Upstream details at : https://access.redhat.com/errata/RHBA-2022:0623 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 3b04769f0fca70f22717ac8026b0938bb9fbc4229eece6d24f30b72db5e9276d redhat-support-lib-python-0.13.0-0.el7_9.noarch.rpm Source: 697719120bb6efbeed4d9c245f4f4c5e94111bb427c617e39c1c88fefa932520 redhat-support-lib-python-0.13.0-0.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 14 Date: Fri, 25 Feb 2022 15:38:05 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:0609 Important CentOS 7 python-pillow Security Update Message-ID: <20220225153805.GA2901(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:0609 Important Upstream details at : https://access.redhat.com/errata/RHSA-2022:0609 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 04aafce3a01a8ef79a286f4b1e46007f4ff2310784c8df59fa21c4b9ef862b84 python-pillow-2.0.0-23.gitd1c6db8.el7_9.i686.rpm e3787987f77c2d6216bcd7f8b59f521fa32928443f39660b17f98be3f0a684a0 python-pillow-2.0.0-23.gitd1c6db8.el7_9.x86_64.rpm 4c0b51e89a2551de7942fb433c79d0f9aa1a872daee24a3859ba5e6e51888012 python-pillow-devel-2.0.0-23.gitd1c6db8.el7_9.i686.rpm d14497105b68ae6076141f696ba00d9f42a831aa982b7bbacae503f429464e72 python-pillow-devel-2.0.0-23.gitd1c6db8.el7_9.x86_64.rpm ddd375eab5397ba731106d9d1a805e9a2c6aa4e504e7487eea4ff54190770885 python-pillow-doc-2.0.0-23.gitd1c6db8.el7_9.x86_64.rpm ec825c7e726b4f918e38b5d16c4713c4f73534bac35c94b116810482f92134c3 python-pillow-qt-2.0.0-23.gitd1c6db8.el7_9.x86_64.rpm f204489e33ce1fbb9eeba9986ed191914338380781d4fef1e6cb0b7256570389 python-pillow-sane-2.0.0-23.gitd1c6db8.el7_9.x86_64.rpm f0b50f270ec1c14903fbb91ed28d0134d984399e67c5cab7709b5de27479c361 python-pillow-tk-2.0.0-23.gitd1c6db8.el7_9.x86_64.rpm Source: aad39b58ec09afd368ecd7155e01bd3ad88c77f50488f6e3f715698190c46640 python-pillow-2.0.0-23.gitd1c6db8.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 15 Date: Fri, 25 Feb 2022 15:41:18 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:0620 Important CentOS 7 kernel Security Update Message-ID: <20220225154118.GA3596(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:0620 Important Upstream details at : https://access.redhat.com/errata/RHSA-2022:0620 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 6652fd59e1328ff5e8f2141d6e091685a4e2cb80366a0f729537fb40a17779b8 bpftool-3.10.0-1160.59.1.el7.x86_64.rpm f8613e068693df3d5e08f956697ae0b595071f7b8c8bbed307faf9dbadef2a8a kernel-3.10.0-1160.59.1.el7.x86_64.rpm 563fbcd370477439a58af9940298f2c82a2b3a37e487abffaa7f2cc6dc359b31 kernel-abi-whitelists-3.10.0-1160.59.1.el7.noarch.rpm aa2c7472ee44f9db48646789dbda352a7399c0d9f9e2644db03345bfbf705395 kernel-debug-3.10.0-1160.59.1.el7.x86_64.rpm c9c2a62c7fb170cc9007afb571d8b9beab632b42aaef2f1461f8ba0a2c5f6d9a kernel-debug-devel-3.10.0-1160.59.1.el7.x86_64.rpm 7e0b3e536d03b5890007813734653bd6fbc40e2af79d298e9448d84e81ea4734 kernel-devel-3.10.0-1160.59.1.el7.x86_64.rpm dc83e35a513a39a6511e6815dff7c318849b1e9ec3399ac8de14115dd8663f84 kernel-doc-3.10.0-1160.59.1.el7.noarch.rpm 4effc7564fc196a4c6411751bedca4e9e01367a459bcaff78bc6849dc7cf71f5 kernel-headers-3.10.0-1160.59.1.el7.x86_64.rpm 394db1fa5c7f0d2612ba1c758328abe415aa0a5677f936aeeb8f95543e5c4110 kernel-tools-3.10.0-1160.59.1.el7.x86_64.rpm 1427f803b91f38e23ae66e6fb49eb6363167e457e76054fcb63fee011d6763b3 kernel-tools-libs-3.10.0-1160.59.1.el7.x86_64.rpm b96b6f75231c9bd50c073462605d9aa5494f79623d07db42df2d505c858be737 kernel-tools-libs-devel-3.10.0-1160.59.1.el7.x86_64.rpm b41d7b6dcc5a7a79787391b203c6f01ca8cc2b821d1918b71d1f1e0fd2182b3c perf-3.10.0-1160.59.1.el7.x86_64.rpm 1bc4e395f855f18adf61d113affcda6539558d534fd9b3ed379bfa03301bb5dd python-perf-3.10.0-1160.59.1.el7.x86_64.rpm Source: 22a7fcd243b980b8329ddfa80be263adf4f581fff94d6d141812ec52be18dd75 kernel-3.10.0-1160.59.1.el7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 202, Issue 5 ***********************************************

1 0

Re: [CentOS] possible issue with CS8 kernel-4.18.0-358.el8.x86_64
by Turing Eret 24 Feb '22

24 Feb '22

I'd like to echo this. `kscreenlocker_greet` doesn't show a password prompt and can't be unlocked, `loginctl unlock-session` just doesn't work, sddm just stops at a black screen and never displays the login prompt. Backed up to 348 and everything works fine. Turing Eret

4 4

ansible upgrade
by Leon Fauster 23 Feb '22

23 Feb '22

Hey all, back from vacation and seeing ansible 2.12 in the repos now. Anything to be aware of when upgrading from 2.9 to 2.12 in CS8? -- Thanks, Leon

2 3

ceph beginner, how to initialize a new node on a blank system?
by Ralf Prengel 21 Feb '22

21 Feb '22

Hallo, first steps in the ceph world. My question: Is there a way to initialise an empty system to be fully configured and active in a ceph cluster. My idea: Booting an empty system using an iso and everything is working some minutes later. Unsig for example pxe and kickstart surely works too but my idea is that an new node perfectly fits in every aspect. Thank Ralf Von meinem iPad gesendet

2 2

DNS server app for Centos8
by Robert Moskowitz 21 Feb '22

21 Feb '22

I have been running my DNS server on a Centos7-arm board for some years and it is past time I get up to date. Particularly get DNSSEC working. So I have plenty of cubieboards for running Centos8-arm, but I want to no longer hand configure. I want some help here; getting up in years and all that. I know there is the Webmin tool, but don't know if it supports dnssec. Looking for that in what docs I have found so far. But is there some other tool for this? I would start to import my zone files and then go from there. thanks

1 2

KVM virsh console to physical console?
by Lists 19 Feb '22

19 Feb '22

I'm preparing to virtualize a Windows server onto a Linux system under virsh. Initial results are looking good, but an issue that's come up is the need to log into the Linux system prior to being able to access the Windows system for updates. Is there a way to "connect" the virsh console directly to a physical Linux terminal? EG: Ctl+Alt+F8 to access the Windows virsh console for Windows Server Thank you Ben Smith

3 2

CentOS-announce Digest, Vol 202, Issue 4
by centos-announce-request＠centos.org 16 Feb '22

16 Feb '22

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2022:0514 Important CentOS 7 firefox Security Update (Johnny Hughes) 2. CESA-2022:0538 Important CentOS 7 thunderbird Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 15 Feb 2022 22:56:11 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:0514 Important CentOS 7 firefox Security Update Message-ID: <20220215225611.GA21078(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:0514 Important Upstream details at : https://access.redhat.com/errata/RHSA-2022:0514 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: f9138cc0c8bd84737691daa9f6f8f6914ee52bef60ec7862c2921c8d8743faa7 firefox-91.6.0-1.el7.centos.i686.rpm 61eb1f5291daee31b9568e4897e13e2fa0260d850c62490f336ee5f55b31703b firefox-91.6.0-1.el7.centos.x86_64.rpm Source: 1f452cf1cb733dc9d4ef2d5d00551adfd55301484b1e83b1721a223df69303cd firefox-91.6.0-1.el7.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Tue, 15 Feb 2022 22:57:09 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:0538 Important CentOS 7 thunderbird Security Update Message-ID: <20220215225709.GA21784(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:0538 Important Upstream details at : https://access.redhat.com/errata/RHSA-2022:0538 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 079057e8ac08393331b2846ec1d9b56021f2e524cf0eb682c033f6348fcf31da thunderbird-91.6.0-1.el7.centos.x86_64.rpm Source: ee9bff2aee73a32e7702cea2165d16c19b7a3ca80a02be27af7e00b4630006c7 thunderbird-91.6.0-1.el7.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 202, Issue 4 ***********************************************

1 0

CentOS Stream 8 dnf fails
by Bill Gee 14 Feb '22

14 Feb '22

Every time I run dnf, I get this: ========= [root@vmhost2 ~]# dnf upgrade CentOS Linux 8 - AppStream 70 B/s | 38 B 00:00 Error: Failed to download metadata for repo 'appstream': Cannot prepare internal mirrorlist: No URLs in mirrorlist ========= I tried disabling the repository, but that only gives me exactly the same error for the baseos repository. I doubt it is a problem in the .repo files. Something else is going on. Ping to mirrorlist.centos.org works on both ipv4 and ipv6, so I know that both name resolution and network connectivity are working. Thanks! ======== Bill Gee

5 8

stream 8 or stream 9 for new server
by Jon LaBadie 13 Feb '22

13 Feb '22

I'm replacing my ancient desktop home server (CentOS 7, email, dns, backup) with a new mini-server. I've been running stream 9 on the new toy for a couple of weeks and I find there are still a lot of incomplete or missing things. Enough to delay full implementation. Unless I do some workarounds or compile from source. On the other hand I've read there will be no migration path from stream 8 to stream 9. It will require a complete reinstall. Any guesses as to when the stream 9 repos (including epel) will be fairly complete? Just trying to decide whether to wait a bit or go with stream 8. Jon -- Jon H. LaBadie jcu(a)labadie.us

4 5

kernel e1000e 0000:00:1f.6 eno1 Reset adapter unexpectedly
by Hooton, Gerard 13 Feb '22

13 Feb '22

The Ethernet interface stops working intermittently, once a day. I get the following message in /var/log/messages Feb 13 04:19:47 pc001 kernel: e1000e 0000:00:1f.6 eno1: Reset adapter unexpectedly I ran the following command : ethtool -i eno1 driver: e1000e version: 4.18.0-365.el8.x86_64 firmware-version: 0.4-4 expansion-rom-version: bus-info: 0000:00:1f.6 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes supports-priv-flags: yes ======= lspci : 00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (11) I219-LM I have CentOS 8 Stream. -- Gerard Hooton.

2 1

CentOS Plus 8-stream support?
by Dan West 11 Feb '22

11 Feb '22

Are the centos-plus packages for 8-stream no longer supported? I noticed that all of the repositories have removed the packages, but I have not heard any announcement that said they were going away. For example: http://mirror.centos.org/centos/8-stream/centosplus/x86_64/os/Packages/ <http://mirror.centos.org/centos/8-stream/centosplus/x86_64/os/Packages/> http://mirrors.edge.kernel.org/centos/8-stream/centosplus/x86_64/os/Package… <http://mirrors.edge.kernel.org/centos/8-stream/centosplus/x86_64/os/Package…> http://ftp.osuosl.org/pub/centos/8-stream/centosplus/x86_64/os/Packages/ <http://ftp.osuosl.org/pub/centos/8-stream/centosplus/x86_64/os/Packages/> I first noticed this when running updates and received the following message: ``` Error: Failed to download metadata for repo 'centosplus': Cannot prepare internal mirrorlist: No URLs in mirrorlist ``` The last mention of the centos-plus repos I can find in the mailing list was from November 18th and was just addressing the final release of CentOS 8: ``` Note that older content, obsoleted by newer versions of the same applications are trim'd off from repos like extras/ and centosplus/ ``` While CentOS 8 EOL’d at the end of December, my understanding is that CentOS 8-Stream will be supported until May 31st 2024. Does that include CentOS Plus for 8-Stream? I really just need CentOS Plus for the kernel-plus package for Wireguard support. The alternative would be to build it into kernel after each release myself, but that isn’t easily maintainable with multiple servers. Let me know if anyone has any insights. Thanks, Dan West

2 1

sdl not useable / are there any limits number of harddisks?
by Ralf Prengel 11 Feb '22

11 Feb '22

Hallo, I ve a system with disks sda to sdk runing as a nexus repo for docker an d kubernetes. Every repo-type has an own disk Everything is working fine. The problem: A new disk sdl can t be uses. fdisk doesn t recocnize the disk. Same problem using parted. The hardware (a vm) is ok because a) booting gparted from a iso gives me full acches b) while booting sdl is shown Centos 7 is in use. Thanks for hints Ralf

3 2

Any downside to mount -o noatime?
by Kenneth Porter 11 Feb '22

11 Feb '22

I'd like to reduce the wear-and-tear on my SSDs and eliminate the unnecessary metadata writes on my backup media that only slow down the backup process. So I want to add noatime to all my mounts. Is there any downside to this? At one time I remember atime being useful for tmpwatch, which removes files in /tmp that haven't been accessed in a week or two. But I can live without that feature.

5 12

Re: [CentOS] Any downside to mount -o noatime?
by Joshua Kramer 11 Feb '22

11 Feb '22

You may get just as much SSD "savings" by putting /var/log and /tmp into a RAM disk. I do this with all of my Raspberry Pi's, since SD cards burn through pretty quickly, and I have several that haven't had their SD cards replaced in a couple years. On Wed, Feb 9, 2022 at 5:10 PM Kenneth Porter <shiva(a)sewingwitch.com> wrote: > I'd like to reduce the wear-and-tear on my SSDs and eliminate the > unnecessary metadata writes on my backup media that only slow down the > backup process. So I want to add noatime to all my mounts. Is there any > downside to this? > > At one time I remember atime being useful for tmpwatch, which removes > files > in /tmp that haven't been accessed in a week or two. But I can live > without > that feature. > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > https://lists.centos.org/mailman/listinfo/centos >

1 0

[CentOS Stream 8] Update of IPA server broken - bind-dyndb-ldap needs to be rebuilt?
by Mathieu Baudier 10 Feb '22

10 Feb '22

Hello, We are testing an IPA/IDM infrastructure which is a mix of RHEL 8 and CentOS Stream 8 environments. The configuration has been completed since last summer, and it is working fine between updates. Currently, the CentOS Stream 8 IPA servers cannot upgrade. I put the whole error message below, but after analyzing a bit, it seems to be that the problem is between: bind-dyndb-ldap (for which there is no new update) and bind-libs-lite (for which a new update is available) $ sudo dnf upgrade bind-libs-lite* Error: Problem: problem with installed package bind-dyndb-ldap-11.6-2.module_el8.5.0+750+c59b186b.x86_64 - package bind-dyndb-ldap-11.6-2.module_el8.5.0+750+c59b186b.x86_64 requires libdns.so.1112()(64bit), but none of the providers can be installed - cannot install both bind-libs-lite-32:9.11.36-2.el8.x86_64 and bind-libs-lite-32:9.11.26-6.el8.x86_64 - cannot install both bind-libs-lite-32:9.11.36-2.el8.x86_64 and bind-libs-lite-32:9.11.26-3.el8.x86_64 - cannot install both bind-libs-lite-32:9.11.36-2.el8.x86_64 and bind-libs-lite-32:9.11.26-4.el8_4.x86_64 - cannot install the best update candidate for package bind-libs-lite-32:9.11.26-6.el8.x86_64 The update bind-libs-lite (32:9.11.36-2) seems to offer: /usr/lib64/libdns.so.1115 while bind-dyndb-ldap (11.6-2.module_el8.5.0+750+c59b186b) seems to still require precisely: /usr/lib64/libdns.so.1112 $ sudo dnf provides */libdns.so* ... bind-libs-lite-32:9.11.26-6.el8.x86_64 : Libraries for working with the DNS protocol Repo : @System Matched from: Filename : /usr/lib64/libdns.so.1112 Filename : /usr/lib64/libdns.so.1112.0.2 ... bind-libs-lite-32:9.11.36-2.el8.x86_64 : Libraries for working with the DNS protocol Repo : appstream Matched from: Filename : /usr/lib64/libdns.so.1115 Filename : /usr/lib64/libdns.so.1115.0.3 ... $ sudo dnf list bind-libs-lite bind-dyndb-ldap Installed Packages bind-dyndb-ldap.x86_64 11.6-2.module_el8.5.0+750+c59b186b @appstream bind-libs-lite.x86_64 32:9.11.26-6.el8 @appstream Available Packages bind-libs-lite.i686 32:9.11.36-2.el8 appstream bind-libs-lite.x86_64 32:9.11.36-2.el8 appstream Please note that, of course, the module stream idm:DL1 is enabled: $ sudo dnf module list idm* CentOS Stream 8 - AppStream Name Stream Profiles Summary idm DL1 [e] adtrust, client, common [d], dns [i], server The Red Hat Enterprise Linux Identity Management system module idm client [d] common [d] RHEL IdM long term support client module Also, as can be expected, these updates are not yet available on the *RHEL 8* IPA servers: $ sudo dnf list bind-libs-lite bind-dyndb-ldap Updating Subscription Management repositories. Installed Packages bind-dyndb-ldap.x86_64 11.6-2.module+el8.4.0+9328+4ec4e316 @rhel-8-for-x86_64-appstream-rpms bind-libs-lite.x86_64 32:9.11.26-6.el8 @rhel-8-for-x86_64-appstream-rpms Available Packages bind-libs-lite.i686 32:9.11.26-6.el8 rhel-8-for-x86_64-appstream-rpms So, is there any workaround, or should we simply wait for the IPA/IDM server DL1 module stream to be updated? (there are updates of the ipa packages which are pending there, juts not bind-dyndb-ldap) Also, should I rather send such reports of our CentOS Stream testing to another mailing-list? (devel?) Or book them into Red Hat's bugzilla? Thanks in advance for your comments! Mathieu ## Full error log when trying to update a CentOS Stream 8 IPA/IDM server $ sudo ipactl status Directory Service: RUNNING krb5kdc Service: RUNNING kadmin Service: RUNNING named Service: RUNNING httpd Service: RUNNING ipa-custodia Service: RUNNING ipa-otpd Service: RUNNING ipa-dnskeysyncd Service: RUNNING ipa: INFO: The ipactl command was successful $ sudo dnf upgrade --refresh CentOS Stream 8 - AppStream 13 kB/s | 4.4 kB 00:00 CentOS Stream 8 - BaseOS 26 kB/s | 3.9 kB 00:00 CentOS Stream 8 - Extras 15 kB/s | 3.0 kB 00:00 Error: Problem 1: package bind-dyndb-ldap-11.6-2.module_el8.5.0+750+c59b186b.x86_64 requires libdns.so.1112()(64bit), but none of the providers can be installed - cannot install both bind-libs-lite-32:9.11.36-2.el8.x86_64 and bind-libs-lite-32:9.11.26-6.el8.x86_64 - cannot install both bind-libs-lite-32:9.11.36-2.el8.x86_64 and bind-libs-lite-32:9.11.26-3.el8.x86_64 - cannot install both bind-libs-lite-32:9.11.36-2.el8.x86_64 and bind-libs-lite-32:9.11.26-4.el8_4.x86_64 - cannot install the best update candidate for package bind-libs-lite-32:9.11.26-6.el8.x86_64 - cannot install the best update candidate for package bind-dyndb-ldap-11.6-2.module_el8.5.0+750+c59b186b.x86_64 Problem 2: problem with installed package bind-dyndb-ldap-11.6-2.module_el8.5.0+750+c59b186b.x86_64 - package bind-dyndb-ldap-11.6-2.module_el8.5.0+750+c59b186b.x86_64 requires libdns.so.1112()(64bit), but none of the providers can be installed - cannot install both bind-libs-lite-32:9.11.36-2.el8.x86_64 and bind-libs-lite-32:9.11.26-6.el8.x86_64 - cannot install both bind-libs-lite-32:9.11.36-2.el8.x86_64 and bind-libs-lite-32:9.11.26-3.el8.x86_64 - cannot install both bind-libs-lite-32:9.11.36-2.el8.x86_64 and bind-libs-lite-32:9.11.26-4.el8_4.x86_64 - package bind-32:9.11.36-2.el8.x86_64 requires libdns.so.1115()(64bit), but none of the providers can be installed - package bind-32:9.11.36-2.el8.x86_64 requires bind-libs-lite(x86-64) = 32:9.11.36-2.el8, but none of the providers can be installed - cannot install the best update candidate for package bind-32:9.11.26-6.el8.x86_64 Problem 3: package ipa-server-dns-4.9.8-2.module_el8.6.0+1053+0ac05726.noarch requires bind-dyndb-ldap >= 11.2-2, but none of the providers can be installed - package bind-dyndb-ldap-11.6-2.module_el8.5.0+750+c59b186b.x86_64 requires libdns.so.1112()(64bit), but none of the providers can be installed - package bind-dyndb-ldap-11.6-2.module_el8.4.0+639+a88aab78.x86_64 requires libdns.so.1112()(64bit), but none of the providers can be installed - cannot install both bind-libs-lite-32:9.11.36-2.el8.x86_64 and bind-libs-lite-32:9.11.26-6.el8.x86_64 - cannot install both bind-libs-lite-32:9.11.36-2.el8.x86_64 and bind-libs-lite-32:9.11.26-3.el8.x86_64 - cannot install both bind-libs-lite-32:9.11.36-2.el8.x86_64 and bind-libs-lite-32:9.11.26-4.el8_4.x86_64 - package bind-libs-32:9.11.36-2.el8.x86_64 requires libdns.so.1115()(64bit), but none of the providers can be installed - package bind-libs-32:9.11.36-2.el8.x86_64 requires bind-libs-lite(x86-64) = 32:9.11.36-2.el8, but none of the providers can be installed - cannot install the best update candidate for package ipa-server-dns-4.9.8-2.module_el8.6.0+1053+0ac05726.noarch - cannot install the best update candidate for package bind-libs-32:9.11.26-6.el8.x86_64 Problem 4: problem with installed package ipa-server-dns-4.9.8-2.module_el8.6.0+1053+0ac05726.noarch - package ipa-server-dns-4.9.8-2.module_el8.6.0+1053+0ac05726.noarch requires bind-dyndb-ldap >= 11.2-2, but none of the providers can be installed - package bind-dyndb-ldap-11.6-2.module_el8.5.0+750+c59b186b.x86_64 requires libdns.so.1112()(64bit), but none of the providers can be installed - package bind-dyndb-ldap-11.6-2.module_el8.4.0+639+a88aab78.x86_64 requires libdns.so.1112()(64bit), but none of the providers can be installed - package bind-libs-lite-32:9.11.26-6.el8.x86_64 requires bind-license = 32:9.11.26-6.el8, but none of the providers can be installed - package bind-libs-lite-32:9.11.26-3.el8.x86_64 requires bind-license = 32:9.11.26-3.el8, but none of the providers can be installed - package bind-libs-lite-32:9.11.26-4.el8_4.x86_64 requires bind-license = 32:9.11.26-4.el8_4, but none of the providers can be installed - cannot install both bind-license-32:9.11.36-2.el8.noarch and bind-license-32:9.11.26-6.el8.noarch - cannot install both bind-license-32:9.11.36-2.el8.noarch and bind-license-32:9.11.26-3.el8.noarch - cannot install both bind-license-32:9.11.36-2.el8.noarch and bind-license-32:9.11.26-4.el8_4.noarch - cannot install the best update candidate for package bind-license-32:9.11.26-6.el8.noarch (try to add '--allowerasing' to command line to replace conflicting packages or '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages)

3 4

Email Notification of updates which are available to be applied on CentOS Linux release 7.9.2009 (Core)
by Kaushal Shriyan 09 Feb '22

09 Feb '22

Hi, I am running the below open source components on CentOS Linux release 7.9.2009 (Core) 1. nginx service 2. mysql service 3. php framework 4. pph-fpm service 5. composer A Dependency Manager for PHP Is there a way to notify via email if there are any new security updates available for CentOS Linux release 7.9.2009 along with the above open source components which are running? Currently, I am manually running the *yum -y update* command to update the OS along with the above open source components. I have tried for yum-updatesd - Update notifier daemon but it is not available for CentOS Linux release 7.9.2009 (Core). Thanks in advance. I look forward to hearing from you. More info:- https://linux.die.net/man/8/yum-updatesd Best Regards, Kaushal

5 4

CentOS-announce Digest, Vol 202, Issue 3
by centos-announce-request＠centos.org 09 Feb '22

09 Feb '22

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2022:0473 Important CentOS 7 aide Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 8 Feb 2022 23:31:43 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:0473 Important CentOS 7 aide Security Update Message-ID: <20220208233143.GA28824(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:0473 Important Upstream details at : https://access.redhat.com/errata/RHSA-2022:0473 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: e00e4e27e76a7ce874a947e6df6282be03c80787552e9101d00197dc467c0182 aide-0.15.1-13.el7_9.1.x86_64.rpm Source: 9a2c3381dea205aafa6593afa062b62b7659783b72f822cd20909cf80b4a524b aide-0.15.1-13.el7_9.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 202, Issue 3 ***********************************************

1 0

CentOS-announce Digest, Vol 202, Issue 2
by centos-announce-request＠centos.org 08 Feb '22

08 Feb '22

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2022:0442 Important CentOS 7 log4j Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 7 Feb 2022 16:47:44 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:0442 Important CentOS 7 log4j Security Update Message-ID: <20220207164744.GA17797(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:0442 Important Upstream details at : https://access.redhat.com/errata/RHSA-2022:0442 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 1b461b4e217ac5f51d8990aad583c7f189e73fd3220a54053124772b83c42eba log4j-1.2.17-18.el7_4.noarch.rpm e4950b148639895cb3ed78b8a00c0708abe4685bd380e0003ebeb947ea1edc42 log4j-javadoc-1.2.17-18.el7_4.noarch.rpm 7bbf77456d5e310210c4bd541fee70097c26568f34f44184c878e5874e2b57f1 log4j-manual-1.2.17-18.el7_4.noarch.rpm Source: c4224181672eede65a1b3d8f829c9ed475cade9b7234f58c03994f39459ca732 log4j-1.2.17-18.el7_4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 202, Issue 2 ***********************************************

1 0

c9s: CPU ISA level lower than required
by Alessio 07 Feb '22

07 Feb '22

Hello. I had a CentOS Stream 9 installation in a KVM VM. Today a "dnf upgrade" lead to an unusable system: dnf, rpm commands complain that "glibc cpu does not support x86-64-v2" or "CPU ISA level is lower than required". The updates leading to this state seem to be: python3 3.9.10-1, glibc 2.34-21, rpm 4.16.1.3-10 What happened? Thanks, A.

5 9

Migrating / upgrading CentOS Linux 8 to CentOS Stream release 8
by Götz Reinicke 07 Feb '22

07 Feb '22

Hi, is it still possible to migrating / upgrading CentOS Linux 8 to CentOS Stream release 8 ? Any hint is welcome! Right now I do get errors: dnf install centos-release-stream CentOS Linux 8 - AppStream 111 B/s | 38 B 00:00 Fehler: Failed to download metadata for repo 'appstream': Cannot prepare internal mirrorlist: No URLs in mirrorlist Thanks for any suggestions. /Götz

3 3

CentOS 7.9: No authentication after samba update
by Gerhard Schneider 06 Feb '22

06 Feb '22

We are using FreeIPA for Linux accounts and a Windows DC for Windows accounts. Users were able to access their Linux file systems from Windows using their windows user name and password. After upgrading samba from samba-4.10.16-7.el7_9.x86_64 to samba-4.10.16-18.el7_9.x86_64 users cannot authenticate and I get the following error message: 1.2.3.4.log: ../../source3/auth/auth_util.c:1889(check_account) check_account: Failed to convert SID S-1-5-21-xxxxxxx-xxxxxxx-xxxxxxx-1158 to a UID (dom_user[DOMAIN\username]) Winbind is still running My smb.conf: [global] netbios name = HOSTNAME security = ADS workgroup = DOMAIN realm = DOMAIN.FULL.NAME socket options = TCP_NODELAY IPTOS_LOWDELAY SO_RCVBUF=131072 SO_SNDBUF=131072 use sendfile = true dns proxy = no log file = /var/log/samba/%m.log max log size = 50 log level = 1 client signing = required server signing = auto [Tmpdisk] comment = TMP-Disk public = yes path = /tmp browsable = Yes read only = No Nothing else updated or changed. What do I miss? This setup was working for years.. Thank you in advance! Gerhard Schneider -- Gerhard Schneider Institute of Lightweight Design and e-Mail: gs(a)ilsb.tuwien.ac.at Structural Biomechanics (E317) Tel.: +43 1 58801 31716 TU Wien / Vienna / Austria Fax: +43 1 58801 31799 A-1060 Wien, Gumpendorfer Straße 7 http://www.ilsb.tuwien.ac.at/~gs/

1 1

Assitance with perl
by H 03 Feb '22

03 Feb '22

I am writing a long bash script under CentOS 7 where perl is used for manipulating some external files. So far I am using perl one-liners to do so but ran into a problem when I need to append text to an external file. Here is a simplified example in the bash script where txt is a bash variable which I built containing a longish text with multiple newlines: txt="a b$'\n'cd ef$'\n'g h$'\n'ij kl" A simplified perl one-liner to append the text in the variable above to some file in the bash script would be: perl -pe 'eof && do{print $_'"${txt}"'; exit}' someexternalfile.txt This works when fine when $txt does /not/ contain any spaces but falls apart when it does. I would like to keep the above structure, ie using bash variables to build text strings and one-liners to do the text manipulation. Hopefully there is a "simple" solution to do this, I have tried many variations and failed miserably... Note that I also want to use a similar pattern to do substitutions in external files, I would thus like to use the same code pattern. Thanks.

6 12

EPEL repo RPM in CentOS 9-stream?
by Chris Adams 03 Feb '22

03 Feb '22

Will the Fedora EPEL repo RPM be added to any CentOS 9-stream core repos, like epel-release is in 7 and 8-stream extras? -- Chris Adams <linux(a)cmadams.net>

1 0

CentOS-announce Digest, Vol 202, Issue 1
by centos-announce-request＠centos.org 02 Feb '22

02 Feb '22

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2022:0328 Critical CentOS 7 samba Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 1 Feb 2022 18:03:11 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:0328 Critical CentOS 7 samba Security Update Message-ID: <20220201180311.GA26601(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:0328 Critical Upstream details at : https://access.redhat.com/errata/RHSA-2022:0328 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: e4bb7031f520b296dbe56b80bca148b9f8409329cef2007dd5a06e4548e780d3 ctdb-4.10.16-18.el7_9.x86_64.rpm 650ecdc0d3c0f2d221347461dc47da74b9aeb8041326a30662c310db8452c289 ctdb-tests-4.10.16-18.el7_9.x86_64.rpm 51a15a1f28637adcdf2f0d13e8d6a81017809612ab5a6a46dda8025be6f4aeec libsmbclient-4.10.16-18.el7_9.i686.rpm c57edeef8ad80c1218e8f3c5f03298b8e4c78de794ef89153d213f767d7e76e8 libsmbclient-4.10.16-18.el7_9.x86_64.rpm ad24252031ea8c0e12e7acf23ebf80586b5162f12ce5e4eac8273966928e89d0 libsmbclient-devel-4.10.16-18.el7_9.i686.rpm f7faa6dc9e93209b28d0cf6a0ef6f0697ece6387cbb402f2554016b1db3192a5 libsmbclient-devel-4.10.16-18.el7_9.x86_64.rpm 7a5d98b836fb6cbb743996d5dd4c13cd9fe0b108498811fbc5ccf1dafa7797ef libwbclient-4.10.16-18.el7_9.i686.rpm 4d7880fbe60e6c8b83c4e01347b5e9ad274f8eee38feee4a3d7c3f8410c561ae libwbclient-4.10.16-18.el7_9.x86_64.rpm 092200d5b5dde09d6818651bad72eaf924bc014da7f290860fa9416ca5d80c29 libwbclient-devel-4.10.16-18.el7_9.i686.rpm b9c8fac8c6b10a87a024279c0ecef2ddf68ea3c55076d9478ee93b3ba8bfc5c0 libwbclient-devel-4.10.16-18.el7_9.x86_64.rpm f878599f24a0292058a13dbc96e35533360c55c1e4616d4db0cce5da1e4ed0e3 samba-4.10.16-18.el7_9.x86_64.rpm 7dae50109a258ad6094999bad1cf8de9bc680b967fcb221cf9e38f896f8cbf93 samba-client-4.10.16-18.el7_9.x86_64.rpm 7029af1412cd34983bc590c58b75f33a9bcb75cb2a5bdf5e6514f8ac4b8089e6 samba-client-libs-4.10.16-18.el7_9.i686.rpm ba296a88e1432d771cd920109f74098580b81344ab27e869815dfaf5cd73b1bd samba-client-libs-4.10.16-18.el7_9.x86_64.rpm 5e9fa6a9c3dc6c925f58ce3d112f48e8d7a89835f56c85fdfa648a880246ebcc samba-common-4.10.16-18.el7_9.noarch.rpm 84eb961185970d439cbddea77f57986510cc0e948d47a65f64173b75fa19949b samba-common-libs-4.10.16-18.el7_9.i686.rpm 1e539eb940638371c11f0e077bf6396b4c0afe2d8a5e55e1a10d9e05b8865487 samba-common-libs-4.10.16-18.el7_9.x86_64.rpm dc916d8fb8fa71e2b3598fd5f5d1544cc54745b116f27a7ab2ecadf3df918a7f samba-common-tools-4.10.16-18.el7_9.x86_64.rpm fd9eac77800954e912c795b1baa2897a1255e8c44f1dcbe7f154da4bbb690fcd samba-dc-4.10.16-18.el7_9.x86_64.rpm 99fbbb592c991c048c088d31d6dc60cef74de08cfb469bfc81e440dd3938c4d4 samba-dc-libs-4.10.16-18.el7_9.x86_64.rpm 6b416b00b5ef6cb53e5629184ff45e772a8c2a837a9e0bb69dc38ebdd07ec7f2 samba-devel-4.10.16-18.el7_9.i686.rpm 3bb061745bcab5ccdf7cac588403affcb1f45108fd78412872bc78b646404b98 samba-devel-4.10.16-18.el7_9.x86_64.rpm df6e614866add11969ca0b65851bfa71c6bc9f4844246ad53138cc6918480108 samba-krb5-printing-4.10.16-18.el7_9.x86_64.rpm 0ebd7a7d93f6af20c4e8fff8d52032fda80556a14021adf330e1c9f9e8063482 samba-libs-4.10.16-18.el7_9.i686.rpm 0d795cbf22fec282f02654f7712344c97027974130c274b8e837bec939303861 samba-libs-4.10.16-18.el7_9.x86_64.rpm f2241666af94fe720a9238c276f97db47b1cb8737b678465e84924e2d3a8d6e1 samba-pidl-4.10.16-18.el7_9.noarch.rpm a8f1e3373e10bfb45af34690456fb06dbf9cf8022362cfda341212c6841271db samba-python-4.10.16-18.el7_9.i686.rpm 009f1e5fdfe0287c2d456390aacab52be52e77247292e285d5caa965c2330dab samba-python-4.10.16-18.el7_9.x86_64.rpm 40519a4b9f7188d9987ae8efcdcd2a6c382d6311c8aafae7cf914313e1d5eef3 samba-python-test-4.10.16-18.el7_9.x86_64.rpm 0159bd2e5e5911a949c27ecc4ee8003c3e2bdc4fe0074b1d0eb53e28360580fa samba-test-4.10.16-18.el7_9.x86_64.rpm 166e3f5af4c284b83976badb2166ef9cbf7ee9204cc585ab900bfe28006a7917 samba-test-libs-4.10.16-18.el7_9.i686.rpm 92d0bc0edf07e6a5b24d5dcbe83924f7438ff5eaa170034fbde75f52fbbde969 samba-test-libs-4.10.16-18.el7_9.x86_64.rpm 87db2fe7caa5472a08068b5229089b79f46799961c76df49341071e86736a23e samba-vfs-glusterfs-4.10.16-18.el7_9.x86_64.rpm 4378731794448fc800d324e71a41beeae2b174ba078b23eb78ccff27fd8d5764 samba-winbind-4.10.16-18.el7_9.x86_64.rpm 9b69e41e187f8c3cd3d73d8a8b89d8ee3e0237dbf11ca2481d2bb26444e5ed32 samba-winbind-clients-4.10.16-18.el7_9.x86_64.rpm 2833f7d8c4764e2c4c247d5f95bf07698e64f2a6dc53aba92fe3fa1f92affe42 samba-winbind-krb5-locator-4.10.16-18.el7_9.x86_64.rpm f85bf7e8f01a89ac772fea257536fa49cc0e71b925cccbf45c5bac62a6c37058 samba-winbind-modules-4.10.16-18.el7_9.i686.rpm b4483eb8d3d6d68b68ad3e08c79385f43b0a40aa17c3681e16b53bdddfa10bef samba-winbind-modules-4.10.16-18.el7_9.x86_64.rpm Source: 69981259831a04dd088b9eb1fc60ae9782fc37bbfc3d6508f214cd574ae77b4f samba-4.10.16-18.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 202, Issue 1 ***********************************************

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss