- Discuss - lists.centos.org

playing DVDs on C7
by Fred Smith 20 Dec '15

20 Dec '15

Hi all! I'm trying to finish setting up my newly upgraded C7 system. It's on the same hardware I ran C6 on for several years. on C6 I had no trouble playing DVDs (after installing tons of packages and libdvdcss). Well, on C7, I've got totem (videos) and all its plugins I can find via yum, VLC (from nux) all the gstreamer and gstreamer1 packages I can find, everything with "dvd" in its name, including libdvdcss from nux. vlc will kinda play movies, i.e., moving garbage appears on the screen, sometimes it'll resemble something from the movie, but most of the time not so much. I can't figure out what's missing here. Totem played a movie for me this afternoon, flawlessly, but now I can't get it to do anything. sometimes it starts up as a plain gray box with no borders, no controls, no nothing, and has to be killed. sometimes it draws the player controls but never starts playing. I've got two DVD drives, one of them replaces a broken one, but the other one has been there for 2-3 years. I've been googling for hours, but haven't turned up anything that I haven't already tried. I'd appreciate suggestions. thanks in advance! here's some yum listings of things I have installed: yum list installed | grep -y dvd dvd+rw-tools.x86_64 7.1-15.el7 @anaconda libdvdcss.x86_64 1.2.13-1.el7.nux @nux-dextop libdvdnav.x86_64 4.2.0-8.el7 @anaconda libdvdread.x86_64 4.2.0-6.el7 @anaconda radvd.x86_64 1.9.2-9.el7 @base yum list installed | grep -y vlc vlc.x86_64 2.2.1-6.el7.nux @nux-dextop vlc-core.x86_64 2.2.1-6.el7.nux @nux-dextop vlc-extras.x86_64 2.2.1-6.el7.nux @nux-dextop yum list installed | grep -y totem totem.x86_64 1:3.14.3-5.el7 @cr totem-nautilus.x86_64 1:3.14.3-5.el7 @cr totem-pl-parser.x86_64 3.10.5-1.el7 @cr yum list installed | grep -y gstreamer PackageKit-gstreamer-plugin.x86_64 1.0.7-5.el7.centos @cr gstreamer.x86_64 0.10.36-7.el7 @anaconda gstreamer-ffmpeg.x86_64 0.10.13-15.el7.nux @nux-dextop gstreamer-plugin-crystalhd.x86_64 3.10.0-11.el7 @epel gstreamer-plugins-bad.x86_64 0.10.23-5.el7.nux @nux-dextop gstreamer-plugins-bad-free.x86_64 0.10.23-20.el7 @anaconda gstreamer-plugins-bad-nonfree.x86_64 0.10.23-2.el7.nux @nux-dextop gstreamer-plugins-base.x86_64 0.10.36-10.el7 @anaconda gstreamer-plugins-good.x86_64 0.10.31-11.el7 @anaconda gstreamer-plugins-ugly.x86_64 0.10.19-17.el7.nux @nux-dextop gstreamer-tools.x86_64 0.10.36-7.el7 @anaconda gstreamer1.x86_64 1.4.5-1.el7 @cr gstreamer1-libav.x86_64 1.0.6-1.el7.nux @nux-dextop gstreamer1-plugins-bad-free.x86_64 1.4.5-3.el7 @cr gstreamer1-plugins-bad-freeworld.x86_64 gstreamer1-plugins-base.x86_64 1.4.5-2.el7 @cr gstreamer1-plugins-good.x86_64 1.4.5-2.el7 @cr gstreamer1-plugins-ugly.x86_64 1.0.6-2.el7.nux @nux-dextop -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ----------------------------- But God demonstrates his own love for us in this: While we were still sinners, Christ died for us. ------------------------------- Romans 5:8 (niv) ------------------------------

4 8

Serial Communication
by Chris Olson 19 Dec '15

19 Dec '15

Many years ago, we began scrapping the RTOS approach for some of our timing-critical applications. Our first applications were based on Solaris real-time extensions and served well us well for many years. Then came the era of shaky support for Intel Solaris and we moved many applications to Linux. There appeared to be no actual need for special real-time features with a good Linux distribution kernel and a GHz processors. One of our most productive applications involves special test equipment computers that drive high speed serial ports. The original development of these systems had the "added benefit" of helping us to learn udev rules. The serial communication is very flexible and most of it is script driven. A current need to update computing platforms is driving script review. There appears to be a bit of variety in outputs to the serial drivers. The echo of a string with redirection to the serial driver, cat of a file with redirection to the serial driver and dd of=/dev/.... are methods used at various places in the scripts. It is not at all clear what drove the choice of the output method at various points in the application. In addition, changing the method of output has not succeeded in breaking most of the applications. Is there some fundamental difference between these methods of output to the driver that might trip us up as we simplify the scripts and port to new computer platforms? Thanks in advance for any assistance.

2 1

CentOS-announce Digest, Vol 130, Issue 8
by centos-announce-request＠centos.org 19 Dec '15

19 Dec '15

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. Release for CentOS AltArch 7 (1511) on x86_64 (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Sat, 19 Dec 2015 00:47:23 +0000 From: Karanbir Singh <kbsingh(a)centos.org> To: CentOS Announcements List <centos-announce(a)centos.org> Subject: [CentOS-announce] Release for CentOS AltArch 7 (1511) on x86_64 Message-ID: <5674A91B.40508(a)centos.org> Content-Type: text/plain; charset=utf-8 I would like to announce the general availability of the following CentOS AltArch 7 Releases: * CentOS AltArch 7 (1511) for i686 * CentOS AltArch UserLand 7 (1511) for Armhfp * CentOS AltArch 7 (1511) for PowerPC64 (TechPreview) * CentOS AltArch 7 (1511) for PowerPC8 LE (TechPreview) We anticipate CentOS AltArch 7 (1511) for Aarch64 will be ready for release within the coming days, and will be announced independently. The CentOS AltArch SIG is a group of people working to build alternative architecture support derived from CentOS Linux's sources. You can find more details about the AltArch group at https://wiki.centos.org/SpecialInterestGroup/AltArch including details on how to get involved and ways to get help for architecture specific issues. Releases under the AltArch SIG are hosted at http://mirror.centos.org/altarch/ and available from external mirrors via rsync, http, ftp as usual, however under the /altarch/ path. Yum configs shipped in the altarch builds points at mirror.centos.org instead of mirrorlist or the external mirrors, as we are still working through the mechanics to facilitate the wider mirrorlist process. We hope to have this in place within the next 2 months, and updates to the yum configs will be issued, when ready, via an updated centos-release rpm. We are hosting a CentOS Dojo in Brussels, Belgium on the 29th Jan 2016. Lots of the key people working on the AltArch builds will be present there and it would be a great forum to engage with these groups. You can get the details for the event at https://wiki.centos.org/Events/Dojo/Brussels2016 including the registration links. In order to bootstrap these builds, we have turned on direct downloads of this content from mirror.centos.org. We do encourage people with the capacity to help seed with external mirrors. Details on howto run a CentOS Mirror are available at https://wiki.centos.org/HowTos/CreatePublicMirrors A key part of our AltArch plans is to make resources available to all the other SIG's in the CentOS environment, so they are able to build, test, deliver their content for these architectures. We are working on setting things up, and hope to start rolling out altarch support for https://cbs.centos.org/ in the first quarter of 2016. If you are engaged in any of the SIGs and would like to find out more details, please come along to our buildsystems meeting that takes place on Mondays in #centos-devel on irc.freenode.net. Details on this meeting and the other SIG meetings can be found in our community meetings calendar published at https://www.centos.org/community/calendar/ . Bug reports and feedback about specific packages should be filed at https://bugs.centos.org/ against the relevant package name, for project CentOS Linux 7, in the same manner as you would for x86_64. However, do mention the architecture as applicable. -------- CentOS AltArch 7 (1511) for i686 : This architecture build supports 32-bit Intel/AMD x86 machines and 32 bit IOT x86 boards. SIG Notes: https://wiki.centos.org/SpecialInterestGroup/AltArch/i386 * CentOS-7-i386-DVD-1511.iso sha256sum : 6af64d8371ed8fb95a56c99530f0dc3eb287e58f72c009c686db0fb80c39f83f direct link : http://mirror.centos.org/altarch/7/isos/i386/CentOS-7-i386-DVD-1511.iso * CentOS-7-i386-Everything-1511.iso sha256sum : 918e0ade9f642c93531c414defeecfc9b2c2a9589d57642d690e46e42b0af82a direct link : http://mirror.centos.org/altarch/7/isos/i386/CentOS-7-i386-Everything-1511.… * CentOS-7-i386-LiveGNOME-1511.iso sha256sum : a03af3c7f6c75c74e1da5d1551ceaf5922427762c5cd6503f4f5e972737134ed direct link : http://mirror.centos.org/altarch/7/isos/i386/CentOS-7-i386-LiveGNOME-1511.i… * CentOS-7-i386-LiveKDE-1511.iso sha256sum : 9fdef81423b872c361bac3ac55718822b4420de1645a4da8d7a255ae500965fc direct link : http://mirror.centos.org/altarch/7/isos/i386/CentOS-7-i386-LiveKDE-1511.iso * CentOS-7-i386-Minimal-1511.iso sha256sum : df6edebec370bdee59e67eb70fab7ddc2fcf4c437803ca9e3213552b3908c4e1 direct link : http://mirror.centos.org/altarch/7/isos/i386/CentOS-7-i386-Minimal-1511.iso * CentOS-7-i386-NetInstall-1511.iso sha256sum : b106a0c13c86db86aaf821b66da1119063479e8776b8711dbbd35042b16bfd6d direct link : http://mirror.centos.org/altarch/7/isos/i386/CentOS-7-i386-NetInstall-1511.… -------- CentOS AltArch UserLand 7 (1511) for Armhfp : This architecture build delivers support for ARMv7hl devices including the Raspberry pi2, Cubie Truck, Bananapi and similar hardware. SIG Notes: https://wiki.centos.org/SpecialInterestGroup/AltArch/Arm32 The armhfp build is delivered as a userland build, implying that kernel and bootloader delivered is not derived from the CentOS Linux 7 distro, but comes from either an upstream kernel.org mainline kernel or is a vendor supported kernel for their own hardware piece. As such, the Armhfp build does not aim to deliver a complete feature set, and is labelled as a UserLand release. There are also no installer images delivered for this architecture. The images shipped are ready to run and are board specific. While there is plenty of desktop and X related support available, our focus for these builds has been towards the server and IoT roles. We have a dedicated mailing list for the ARM ports ( both Armhfp and Aarch64 ) at https://lists.centos.org/mailman/listinfo/arm-dev ; questions specific to these builds and images should be posted there. * CentOS-Userland-7-armv7hl-Minimal-1511-BananaPi.img.xz sha256sum : d461144b471434a275268e85828def38c09e265da24b71d2f10771d264532368 direct link : http://mirror.centos.org/altarch/7/isos/armhfp/CentOS-Userland-7-armv7hl-Mi… * CentOS-Userland-7-armv7hl-Minimal-1511-CubieTruck.img.xz sha256sum : 17c3944429ac323c636ee955062d8177219f397fea4416dca87ca19092b646ec direct link : http://mirror.centos.org/altarch/7/isos/armhfp/CentOS-Userland-7-armv7hl-Mi… *CentOS-Userland-7-armv7hl-Minimal-1511-RaspberryPi2.img.xz sha256sum : 05e8c58cd837b90c0ab423b3730ee20ad185e19f346f531d3717c51358ea72cf direct link : http://mirror.centos.org/altarch/7/isos/armhfp/CentOS-Userland-7-armv7hl-Mi… -------- CentOS AltArch 7 (1511) for PowerPC64 (TechPreview) : This architecture is for 64-bit IBM POWER7 machines using big endian byte ordering. We are marking this as a Tech Preview release, as it needs wider testing before it can be adopted as a GA release. SIG Notes: https://wiki.centos.org/SpecialInterestGroup/AltArch/ppc64 * CentOS-7-AltArch-ppc64-Everything-1511.iso sha256sum : 40ce665db62483a044a6d1a4996b2d5b507eb7f43c5e7846116dbd72e9e64e6a direct link : http://mirror.centos.org/altarch/7/isos/ppc64/CentOS-7-AltArch-ppc64-Everyt… * CentOS-7-AltArch-ppc64-NetInstall-1511.iso sha256sum : 46715a965f98901fabed13076aba879c32dd51b7bab63fa035b61a5b051f0b04 direct link : http://mirror.centos.org/altarch/7/isos/ppc64/CentOS-7-AltArch-ppc64-NetIns… -------- CentOS AltArch 7 (1511) for PowerPC8 LE (TechPreview) : This architecture is for 64-bit IBM POWER8 machines using little endian byte ordering. We are marking this as a Tech Preview release, as it needs wider testing before it can be adopted as a GA release. SIG Notes: https://wiki.centos.org/SpecialInterestGroup/AltArch/ppc64le * CentOS-7-AltArch-ppc64le-Everything-1511.iso sha256sum : 713ea707eea4eb75d7ff27648e6e3a4e97738bc3b2b274d1e9dc629fe537a170 direct link : http://mirror.centos.org/altarch/7/isos/ppc64le/CentOS-7-AltArch-ppc64le-Ev… * CentOS-7-AltArch-ppc64le-NetInstall-1511.iso sha256sum : fa7c5f504e56ad9115b820b1cf6650e6c20c6ca6224b155ef0c12e1be8e8f666 direct link : http://mirror.centos.org/altarch/7/isos/ppc64le/CentOS-7-AltArch-ppc64le-Ne… -------- I'd like to thank everyone involved in this process. We have come a long way down the route from the initial plans of getting the AltArch project bootstrapped, and its only down to the dedciated efforts from the people involved in this process that we are able to deliver support for five new architectures. I also want to take this opportunity to point out that we run an office hours forum, twice a week. Details are available at https://www.centos.org/community/calendar/#Karanbir_Singh_Office_Hours , please feel free to stop by and say hi. We welcome comments and questions around pretty much anything / everything relevant to the CentOS community. enjoy! -- Karanbir Singh, Project Lead, The CentOS Project +44-207-0999389 | http://www.centos.org/ | twitter.com/CentOS GnuPG Key : http://www.karan.org/publickey.asc ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 130, Issue 8 ***********************************************

1 0

CentOS 7.2 - Fast TSC calibration failed.
by Earl A Ramirez 19 Dec '15

19 Dec '15

Dear All, I have downloaded CentOS 7.2.1511 DVD and tried to install it on a new laptop that comes with an Intel i7 6th generation processor and don't matter which option I use (install, test media or troubleshooting); I get the following error: [ 0.000000] tsc: Fast TSC calibration failed [ 0.321345] pnp 00:0d: can't evaluate _CRS: 1 At this time I am not able to use any keys on the keyboard; therefore, the only option I have is to power the laptop off. The laptop specifications are as follow: Processor : Intel Core i7-6700HQ 2.6GHz (Turbo up to 3.5GHz) Skylake RAM : 32 GB DDR4-SDRAM Graphics Coprocessor : NVIDIA GTX960M 2GB GDDR5 Chipset Brand : Intel I waited for CentOS 7.2 because I saw that upstream had [0] "the 'intel_idle' and 'pstate' driver updated to support 6th Generation Intel Core processor". Shall I file a bug for this or will I need to create a ISO with an customised kernel or use one of ElRepo's 'lt' or 'ml' kernels which will include support for the new hardware. The full specification of the laptop can be found here [1] [0] https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/7/ht… [1] http://store.asus.com/us/item/201510AM170008064/A17602 -- Kind Regards Earl Ramirez

2 2

CentOS 7 installer bug?
by m.roth＠5-cent.us 19 Dec '15

19 Dec '15

The other admin I work with seems to have found a bug in the installer. The setup is: two internal SSD drives. Once the GUI gets to "select drive to install on", he goes to <ctl><alt><f2>, creates a RAID 1, and partitions it, regular MBR (they're small). 1G for /boot as the first partition, 2G for swap as the second partition, and the rest for / as partition 3. fdisk shows the partition types correctly. Back to the GUI, select the MD drive... and /boot's fine, / looks ok... but the one for swap shows with 0 bytes. Anyone else seen this behavior? mark

3 2

google chrome future / centos 7
by Richard 18 Dec '15

18 Dec '15

I'm seeing the following banner when I start up google-chrome 48-beta (48.0.2564.48 beta (64-bit)) on my 7.2 machines: This computer will soon stop receiving Google Chrome updates because this Linux system will no longer be supported. Does this portend a support issue for chrome on centos-7 in a few months when the underlying changes make their way into their -stable (since, as I understand it/as last I remember, in the centos world we don't have benefit of the RH chromium release)?

9 23

Re: [CentOS] 7.2 kernel panic on boot
by James B. Byrne 18 Dec '15

18 Dec '15

On Thu, December 3, 2015 14:50, m.roth(a)5-cent.us wrote: > Valeri Galtsev wrote: . . . >> That is my main complaint about parallelized boot. My brain is >> only capable to deal with serial sequence of events, and which >> next event is deterministically predictable from previous. As >> with fatal things like kernel panic, it is the previous before >> the fatalstep is the one that you still can see... >> >> It there some way to tell systemd kick in components serially? >> >> Severs aside (you can not have everything), this (CentOS 7) is a >> great system for laptops, the best I saw so far. Like machintosh. >> Only better. > > For laptops, great. For anything else, not so much. For example, > it's supposed to be an *ENTERPRISE* o/s... why does it > automatically, without ever asking, install anything wifi? I'm > still trying to figure out how to tell a *wired* CentOS 7 > workstation to stop even thinking about wifi or wimax, and stop > cluttering the logs with debugging garbage. > The short answer: Because RHEL is based on Fedora development. The long answer: Because RH believes/believed that the laptop environment is/was a key part of its growth strategy. The recent phenomenon of the widespread adoption of smart phones and tablets in place of laptops may bring that into question now, but the move to laptops was a deliberate business choice in my opinion. It remains to be seen whether or not RH can have its cake and eat it too. Sysadmins tend to be rather prickly people when it comes to people and things that appear to waste their time. It seems to me a strategy of dubious worth aggravating ones installed based chasing a chimera. However that may be, the world moves on and we perforce move with it or are left behind. -- *** e-Mail is NOT a SECURE channel *** Do NOT transmit sensitive data via e-Mail James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

4 5

CentOS-7 Security Updates
by Дмитрий Тесёлкин 18 Dec '15

18 Dec '15

Hi all, I'm trying to clarify the security updates policy for older CentOS-7 releases. There is a number of servers I'm supporting that are running CentOS-7 1503. When 1511 was released several days ago I've tried to upgrade several of those, but failed. I've got some strange errors with e1000 virtual NIC being restarted frequently with 'tx unit hang' errors. Anyway, it's not the thing I'd like to discuss here. What I'd like to know is the answer to the question "will there be any security updates for CentOS-7 1503, and how long"? I was searching on a wiki, but couldn't find anything clear enough. What I've found is the phrase in 1511 announcement letter This release supersedes all previously released content for CentOS Linux 7, and therefore we highly encourage all users to upgrade their machines. Information on different upgrade strategies and how to handle stale content is included in the Release Notes. This makes me think that there will be no security updates for 1503 and the only way to get them is to upgrade to 1511, but I'd like to find any proof. Unfortunately, there is nothing about this in Release Notes :( -- Regards, Dmitry Teselkin

5 4

CentOS-announce Digest, Vol 130, Issue 7
by centos-announce-request＠centos.org 18 Dec '15

18 Dec '15

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. Announcing release for Ruby 1.9.3, 2.0.0, 2.2 and Ruby on Rails 3.2, 4.0, 4.1 on CentOS Linux 6 x86_64 SCL (Honza Horak) 2. Announcing release for Python 2.7, 3.3 and 3.4 on CentOS Linux 6 and 7 x86_64 SCL (Honza Horak) ---------------------------------------------------------------------- Message: 1 Date: Thu, 17 Dec 2015 14:33:18 +0100 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release for Ruby 1.9.3, 2.0.0, 2.2 and Ruby on Rails 3.2, 4.0, 4.1 on CentOS Linux 6 x86_64 SCL Message-ID: <5672B99E.6060600(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability versions 1.9.3, 2.0.0, and 2.2 of the Ruby, and versions 3.2, 4.0 and 4.1 of the Ruby on Rails, now also on CentOS Linux 6 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) This is an addition for the Ruby collections that are already available for CentOS 7 (https://lists.centos.org/pipermail/centos-announce/2015-November/021501.html) QuickStart ---------- You can get started in three easy steps (example of Ruby 2.2 and Ruby on Rails 4.1): $ sudo yum install centos-release-scl $ sudo yum install rh-ruby22 rh-ror41 $ scl enable rh-ruby22 bash At this point you should be able to use ruby just as a normal application. An examples of commands run might be: $ ruby my-app.rb $ gem install activeresource $ bundle In order to view the individual components included in this collection, including additional rubygems plugins, you can run: $ sudo yum list rh-ruby22\* rh-ror41\* The rh-ror41 collection relies on the rh-ruby22 collection and the ror40 collection relies on the ruby200 collection, so the Ruby collections will be also installed when the Ruby on Rails collection is installed. About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The collection rh-ruby22 delivers bundler and version 2.2 of the Ruby interpreter, while the collection rh-ror41 delivers version 4.1 of the Ruby on Rails framework that allows to create and run applications in Ruby or Ruby on Rails framework. The collection ruby200 delivers version 2.0.0 of the Ruby interpreter, while the ror40 collection delivers version 4.0 of the Ruby on Rails framework and bundler. The collection ruby193 delivers version 1.9.3 of the Ruby interpreter, bundler and version 3.2 of the Ruby on Rails framework. Some of the most common rubygems are also included in the collections as RPMs, the rest may be installed using bundler or gem tools. For more on the Ruby and Ruby on Rails, see https://www.ruby-lang.org, http://rubyonrails.org or https://rubygems.org. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the Ruby and Ruby on Rails collections being released here, we also build and deliver databases, web servers, and language stacks including multiple versions of PostgreSQL, MariaDB, Apache HTTP Server, NodeJS, Python and others. Software Collections SIG release was announced at https://lists.centos.org/pipermail/centos-announce/2015-October/021446.html You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. We meet every second Wednesday at 16:00 UTC in #centos-devel (ref: https://www.centos.org/community/calendar) for an informal open forum open to anyone who might have comments, concerns or wants to get started with SCL's in CentOS. Enjoy! Honza SCLo SIG member ------------------------------ Message: 2 Date: Thu, 17 Dec 2015 14:52:58 +0100 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release for Python 2.7, 3.3 and 3.4 on CentOS Linux 6 and 7 x86_64 SCL Message-ID: <5672BE3A.8060506(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of versions 2.7, 3.3 and 3.4 of the Python on CentOS Linux 6 x86_64 and CentOS Linux 7 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps (example of Python 3.4): $ sudo yum install centos-release-scl $ sudo yum install rh-python34 $ scl enable rh-python34 bash At this point you should be able to use python just as a normal application. An examples of commands run might be: $ python my-app.py $ easy_install Flask $ easy_install Django $ bundle In order to view the individual components included in this collection, including additional python modules, you can run: $ sudo yum list rh-python34\* About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The collections rh-python34, python33 and python27 deliver versions 3.4, 3.3 and 2.7 of the Python interpreter, pip installer (except python33, which does not include pip) and some other modules that are also included in the collections as RPMs. For more on the Python, see https://www.python.org/. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the Python collections being released here, we also build and deliver databases, web servers, and language stacks including multiple versions of PostgreSQL, MariaDB, Apache HTTP Server, NodeJS, Ruby and others. Software Collections SIG release was announced at https://lists.centos.org/pipermail/centos-announce/2015-October/021446.html You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. We meet every second Wednesday at 16:00 UTC in #centos-devel (ref: https://www.centos.org/community/calendar) for an informal open forum open to anyone who might have comments, concerns or wants to get started with SCL's in CentOS. Enjoy! Honza SCLo SIG member ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 130, Issue 7 ***********************************************

1 0

Setting up PXE server
by david 18 Dec '15

18 Dec '15

Folks On a lark, I am trying to set up a PXE server so I can use network boots to load new computers {some of which are virtual) at home. It's more of an intellectual exercise than a work necessity. I've read several "how to" documents, and even the one on the RedHat site doesn't help. (For example, it refers to /etc/xinet.d instead of /etc/xinetd.d, and the careless references continue elsewhere.) My goal is to make it possible to load a computer using network boot with the equivalent of the "net-install" of Centos 7. My gateway computer serves as a DHCP and (internal) DNS server for my in-house machines. Are there any good references, or working examples I could look at? My gateway is running Centos 6, but I'm hoping the model will work when I convert the gateway to Centos 7. Thanks David

3 2

curl problem
by Joey 17 Dec '15

17 Dec '15

Hello, curl (yum upgrade) stopped with this errormessage: https://rpm.nodesource.com/pub/el/7/x86_64/repodata/repomd.xml: [Errno 14] curl#60 - "Peer's Certificate issuer is not recognized." whats happend? thx. Joey

1 0

Upgrade security relevant packages
by Chris 17 Dec '15

17 Dec '15

Hello, I'm looking for a solution to automatically yum update security relevant packages on a couple hundred Centos6/7 servers. The deployment/trigger would be Ansible. I looked into the "yum-plugin-security" and tested it on a CentOS 6 installation but always found no security relevant updates (yum list-security/yum --security update) where there should be at least a couple ones. I read around it and found that this solution is not working for CentOS (can you please confirm). What is the best practice to upgrade security relevant packages on live systems without service interruption? Thanks in advance! Cheers, Chris

4 4

File Share Problem Between SAMBA AND WINDOWS 7
by Erkin Aka 17 Dec '15

17 Dec '15

hi, i have installded samba 4 oncentos 7 and started to use as part of active directory. But i have a problemabout sharing files between samba and windows 7. i can browse and edit sharedfiles and folders on windows 7. But when i create a new folder, the owner of the folder is seen as “#User300012”instead of the real samba user. My sharing steps 1- i have add a user named “ege” on centos and addhim on samba with smbpasswd -a ege 2- and iedited the permissions of the home folder of “ege” with chmod 777 3- mysmb.conf file [homes] browseable = yes writeable = yes valid users = %S read only = No 4- i logged on Windows 7 with user SERVER\ege, andi can browse shared folders. But when i create a folder in shared folder on Windows7 the owner of the folder is seen as “#User300012”. but the user name is “ege”on centos and samba. How can i fix thisowner of folder problem. Because of this problem i can’t use the quota forusers.

3 5

CentOS-announce Digest, Vol 130, Issue 6
by centos-announce-request＠centos.org 17 Dec '15

17 Dec '15

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2015:2655 Important CentOS 7 bind Security Update (Johnny Hughes) 2. CESA-2015:2657 Critical CentOS 7 firefox Security Update (Johnny Hughes) 3. CEBA-2015:2654 CentOS 6 udev BugFix Update (Johnny Hughes) 4. CESA-2015:2655 Important CentOS 6 bind Security Update (Johnny Hughes) 5. CESA-2015:2658 Important CentOS 5 bind97 Security Update (Johnny Hughes) 6. CESA-2015:2656 Important CentOS 5 bind Security Update (Johnny Hughes) 7. CESA-2015:2657 Critical CentOS 6 firefox Security Update (Johnny Hughes) 8. CESA-2015:2657 Critical CentOS 5 firefox Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 16 Dec 2015 20:01:41 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2015:2655 Important CentOS 7 bind Security Update Message-ID: <20151216200141.GA32664(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2015:2655 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2015-2655.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 0811e5950fff3136324237fd5050fc1afc33bf6098e9582ffa24d6338be40109 bind-9.9.4-29.el7_2.1.x86_64.rpm 7bde727a4d71d040d556a1966dc53011d8edb62a3a4346ec96ce56b5b8745fd1 bind-chroot-9.9.4-29.el7_2.1.x86_64.rpm 14c0e86b12a2e01c11ddc0f5a8dc4bd3c1685812fd371013db68b2bd0d535232 bind-devel-9.9.4-29.el7_2.1.i686.rpm 2dd0d8ff832b23f76a1e622675b22fb5b38afb57dc928cb17506f25c91bf9e7a bind-devel-9.9.4-29.el7_2.1.x86_64.rpm 1e9b1edb4f5c88d6a12d72fb15705be42954bdd8be4d8d90bdc243eede2a460f bind-libs-9.9.4-29.el7_2.1.i686.rpm 389f32de98aac1cc921d1b363f0cff0c151afbd0c80429a5a868b57eb25072bf bind-libs-9.9.4-29.el7_2.1.x86_64.rpm 58603812e909cb1e7ce163e194b07a85766ce284536687ee629fd9ee3e18f96f bind-libs-lite-9.9.4-29.el7_2.1.i686.rpm fef40afc6907ea696e34117e5f1cc645e5cc1358b44d17e828741e3a1281aca5 bind-libs-lite-9.9.4-29.el7_2.1.x86_64.rpm ffde45946640f1e61e53761a73f7a2fd9a5ff712561d0e428f95afc0c2a00bef bind-license-9.9.4-29.el7_2.1.noarch.rpm bafbe09a17e085b6de6e57ac8599f7df830a45735cfde37de06ea6b4fb4a6f3c bind-lite-devel-9.9.4-29.el7_2.1.i686.rpm 4a92101b1046af125612bf8a5d11f9e930393001fc9efe9e1a8f976ad975f13e bind-lite-devel-9.9.4-29.el7_2.1.x86_64.rpm dc4db225c6ed118d838ac40840d4533412404a3e7f1111f177b240389f507a55 bind-pkcs11-9.9.4-29.el7_2.1.x86_64.rpm 6d24bf0380b0e0f3dc0b9d85c02ad4ae7617b9e2fb16100587f7de2455b12cf4 bind-pkcs11-devel-9.9.4-29.el7_2.1.i686.rpm 1e129b2ee632a120ab25377b456d99e0479489d83bd899d449bd127cc39ca342 bind-pkcs11-devel-9.9.4-29.el7_2.1.x86_64.rpm cf8f12f3c4cc92f5b65916f710a890a10492974028d77df62266df915d07baab bind-pkcs11-libs-9.9.4-29.el7_2.1.i686.rpm ea7489d41b54c7b93d1343751271c4ba9d92135813ac810c60e7f56aa4d68d2a bind-pkcs11-libs-9.9.4-29.el7_2.1.x86_64.rpm 62a95dd610f6cd3a40e3afcbfb115cf389e723b799b97a324b6712b22e7ca9ee bind-pkcs11-utils-9.9.4-29.el7_2.1.x86_64.rpm a942794f95d3430be3136478496c1dd50a5bb990cb37c50760615d65aaa20baa bind-sdb-9.9.4-29.el7_2.1.x86_64.rpm 695716a3242cd0040f0179a305dc03b0dbcdc9ed6e6c9590ba53b85ae05f2666 bind-sdb-chroot-9.9.4-29.el7_2.1.x86_64.rpm 85435442931d8056bf16075dc3c71f6c7ccaa39a0f093e891e862d7d82a9d4ef bind-utils-9.9.4-29.el7_2.1.x86_64.rpm Source: 6fa9ac7f31b1c4aa24e372f978f7830924ec2a9c17a1b2fc781939b8a28b7b7d bind-9.9.4-29.el7_2.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Wed, 16 Dec 2015 20:02:04 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2015:2657 Critical CentOS 7 firefox Security Update Message-ID: <20151216200204.GA32744(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2015:2657 Critical Upstream details at : https://rhn.redhat.com/errata/RHSA-2015-2657.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 1cc9fba74ceb042a050ed4b678c449be6e3d15590d94b74a70a8dc6c26b1f4a8 firefox-38.5.0-3.el7.centos.i686.rpm a4fc56d9226dd2355fdf1966851214e989629411ec36db45bb07c3155eeab788 firefox-38.5.0-3.el7.centos.x86_64.rpm Source: d638045c394ac43ca2496402727b4f67b264d499230789d70786e5a7fc772f21 firefox-38.5.0-3.el7.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 3 Date: Wed, 16 Dec 2015 20:18:29 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:2654 CentOS 6 udev BugFix Update Message-ID: <20151216201829.GA35730(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:2654 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-2654.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 447d34fe297fc91ae7de208ee5810fb6f60adf97593f687bacd3b4d4b3fe407b libgudev1-147-2.63.el6_7.1.i686.rpm fa1e8acd300a76a603a42aa192b2a7ded2dec62bde9d82892e0a50b5a6be35d0 libgudev1-devel-147-2.63.el6_7.1.i686.rpm d78f0bf45614fa0717b4961fc44d96f4777555c05dfcbf5e338b80e21dcdb873 libudev-147-2.63.el6_7.1.i686.rpm b0a0db26676a2b5d63ca9dc0960b301485a50830fdbc572d9c9ef870e22d4580 libudev-devel-147-2.63.el6_7.1.i686.rpm e17affd21f069d955ef626af2e21944d12c1b1e0f5072f1174f40d4dc2780833 udev-147-2.63.el6_7.1.i686.rpm x86_64: 447d34fe297fc91ae7de208ee5810fb6f60adf97593f687bacd3b4d4b3fe407b libgudev1-147-2.63.el6_7.1.i686.rpm a0e210d7fea9181a8b9baec6b14e80b43cb1d66a088d3d06ec55cc8d1a175cbc libgudev1-147-2.63.el6_7.1.x86_64.rpm fa1e8acd300a76a603a42aa192b2a7ded2dec62bde9d82892e0a50b5a6be35d0 libgudev1-devel-147-2.63.el6_7.1.i686.rpm ecbf9c1884202cfcca30b53d473060310a8766308f4cc19007b7dc037c0b052c libgudev1-devel-147-2.63.el6_7.1.x86_64.rpm d78f0bf45614fa0717b4961fc44d96f4777555c05dfcbf5e338b80e21dcdb873 libudev-147-2.63.el6_7.1.i686.rpm ec7662a0fc4fd42706dc71784f727661b81e6d16fd91755f8f47c9468bbc1892 libudev-147-2.63.el6_7.1.x86_64.rpm b0a0db26676a2b5d63ca9dc0960b301485a50830fdbc572d9c9ef870e22d4580 libudev-devel-147-2.63.el6_7.1.i686.rpm a3a1614ec2f66ca04303dac00943d1b24d67f8dfee942e93a0f0757b06f9b963 libudev-devel-147-2.63.el6_7.1.x86_64.rpm f1e124eff6e18a3e7d480744643501023606db67477940f35eb1e8fb587f024c udev-147-2.63.el6_7.1.x86_64.rpm Source: f5709a26287ecce830b752f74b3b7af272339099e0c635f6fcd616c01c910575 udev-147-2.63.el6_7.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 4 Date: Wed, 16 Dec 2015 20:19:17 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2015:2655 Important CentOS 6 bind Security Update Message-ID: <20151216201917.GA36051(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2015:2655 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2015-2655.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: a6e9f9d465f359f55db3ab944454fec8fc88f643ef7a4add405ef8673086b151 bind-9.8.2-0.37.rc1.el6_7.5.i686.rpm 3e8f7fbfa67ded03de604f92afa84da397b2986372682459cd9042259130fa33 bind-chroot-9.8.2-0.37.rc1.el6_7.5.i686.rpm 108fcf6e3fa41f14033e9c884e23aa7c5c580b601aa8e2a38a962564e87c3064 bind-devel-9.8.2-0.37.rc1.el6_7.5.i686.rpm c0f21c24ab02c5e2cc8e62123aada97bc76c078f9e697fb057366caab7a8bd2d bind-libs-9.8.2-0.37.rc1.el6_7.5.i686.rpm 54306156d311efa69259af6e103c8a6d57b7c5372134626ea3b1d3d40f4f0a20 bind-sdb-9.8.2-0.37.rc1.el6_7.5.i686.rpm 163ec060fd53b47ee42d037b728d2b3dd62ec91ed51510cdce55bc1be94d3392 bind-utils-9.8.2-0.37.rc1.el6_7.5.i686.rpm x86_64: 82292085be622290568eb551e9448208a6647e90ee39d87fd0eb714ff51a9c75 bind-9.8.2-0.37.rc1.el6_7.5.x86_64.rpm b7838a2e4d09c105980a4b7d971a0a8bef2d5d999ecfc0cba76dfa47724f1492 bind-chroot-9.8.2-0.37.rc1.el6_7.5.x86_64.rpm 108fcf6e3fa41f14033e9c884e23aa7c5c580b601aa8e2a38a962564e87c3064 bind-devel-9.8.2-0.37.rc1.el6_7.5.i686.rpm 5a80d45b6be6721a104344fe399406817fa5255bd4de938d9b421d280598618f bind-devel-9.8.2-0.37.rc1.el6_7.5.x86_64.rpm c0f21c24ab02c5e2cc8e62123aada97bc76c078f9e697fb057366caab7a8bd2d bind-libs-9.8.2-0.37.rc1.el6_7.5.i686.rpm 295f460e79abaca23a6e648bb00ad169d9410422297f53a8d7ea5c3f5f6b1930 bind-libs-9.8.2-0.37.rc1.el6_7.5.x86_64.rpm e75b77960bcd3322b08f84aece1d9d948f2bf1fb22fa343f2f2bb041e1fed64a bind-sdb-9.8.2-0.37.rc1.el6_7.5.x86_64.rpm e440ee99799a0b96d5aea0020b4369ce7e80d413f3e3a07a03f9c12a0789f257 bind-utils-9.8.2-0.37.rc1.el6_7.5.x86_64.rpm Source: 091274ede99a2f24fe1adbda4b9ca846e6a16b5b4d22334ccc1274602effaeaf bind-9.8.2-0.37.rc1.el6_7.5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 5 Date: Wed, 16 Dec 2015 20:24:27 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2015:2658 Important CentOS 5 bind97 Security Update Message-ID: <20151216202427.GA15819(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2015:2658 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2015-2658.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 0dc7e37c9a0bfb8cfbe4ed0f47b8a2a7203c8e0827f1c1c3e58ad2e89acbceda bind97-9.7.0-21.P2.el5_11.4.i386.rpm c2f9476af04240493c79f417555a3cf5d789e1bae0d5e6aa431edef340d744aa bind97-chroot-9.7.0-21.P2.el5_11.4.i386.rpm bf9c3704e4b53b0075b69c4364bd060bcac0537b7d802bade1dfeacf6d9960a0 bind97-devel-9.7.0-21.P2.el5_11.4.i386.rpm 58dd5a111d6f4a62a4a126438d6c84d99a2e05ba78365445e29e1511416ecfb0 bind97-libs-9.7.0-21.P2.el5_11.4.i386.rpm 5b2161fa19b6a8443ef833a39fd8874157546a6bd79dd221697c044bdad3acab bind97-utils-9.7.0-21.P2.el5_11.4.i386.rpm x86_64: 2031b06ec98400856ea369fda692af8a94b84e10c64537f9c95fcc0070b8d8e8 bind97-9.7.0-21.P2.el5_11.4.x86_64.rpm b5797b4822ce8a0672843669133feae3606e18e42b443779ee454d5a760817bb bind97-chroot-9.7.0-21.P2.el5_11.4.x86_64.rpm bf9c3704e4b53b0075b69c4364bd060bcac0537b7d802bade1dfeacf6d9960a0 bind97-devel-9.7.0-21.P2.el5_11.4.i386.rpm 6f9d405b2da20f4e688899031638cd8ceef2bdf77c4708c28d71ee53d5d5c8f4 bind97-devel-9.7.0-21.P2.el5_11.4.x86_64.rpm 58dd5a111d6f4a62a4a126438d6c84d99a2e05ba78365445e29e1511416ecfb0 bind97-libs-9.7.0-21.P2.el5_11.4.i386.rpm 6388629f1cdbf1ca81c7626f9074166866b6d18b9c48fd1515b539c8aa772f5b bind97-libs-9.7.0-21.P2.el5_11.4.x86_64.rpm 9f0b6d94530c667b102c482d190e34a08c6e5fde2261d4682389795be0bb73f9 bind97-utils-9.7.0-21.P2.el5_11.4.x86_64.rpm Source: aa22688ed36432dd77caf55436efe883cb5d1a872051923f3515846294436b50 bind97-9.7.0-21.P2.el5_11.4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: JohnnyCentOS ------------------------------ Message: 6 Date: Wed, 16 Dec 2015 20:26:24 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2015:2656 Important CentOS 5 bind Security Update Message-ID: <20151216202624.GA15981(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2015:2656 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2015-2656.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: a391b19066a380dfe5f49949484656fb4c0184d849409d16cd705ca766c6c2c9 bind-9.3.6-25.P1.el5_11.5.i386.rpm a95bc39d5997333565f7ce0834134638868268ee25edeb8a31f2b541645aa760 bind-chroot-9.3.6-25.P1.el5_11.5.i386.rpm 78ae77851bcb3824abbc8aa5b88dbe174912504967db9988596463a59115edc9 bind-devel-9.3.6-25.P1.el5_11.5.i386.rpm 4ab04d99036291cc60c905c591b8f0c4bd33253ab0c464217f9796aa84aa0ce4 bind-libbind-devel-9.3.6-25.P1.el5_11.5.i386.rpm c0207497c021605575abba89a819a73d2a7f21ff1182111511b9494ee7ac9531 bind-libs-9.3.6-25.P1.el5_11.5.i386.rpm 084e99f4a33b21290ae3ec25ddcbcfdd89aa646e8abd27bdd877094f41315809 bind-sdb-9.3.6-25.P1.el5_11.5.i386.rpm 919e8c5f2143f54e71a222c3fe33583aa832191012948a400c45afa968b9854e bind-utils-9.3.6-25.P1.el5_11.5.i386.rpm bed58b1ce7d3ff3451cdcf98fe986a86430675917dc3a9f749215af2be3ba240 caching-nameserver-9.3.6-25.P1.el5_11.5.i386.rpm x86_64: 66b48d94bb5278a89db513069e718225a5c1ac5de6d6cad150aa56cabc00a8da bind-9.3.6-25.P1.el5_11.5.x86_64.rpm 82e8c1fe7b30b4248ea4256c3baa5e4aa5de600953953e8f12213f04973a0c8f bind-chroot-9.3.6-25.P1.el5_11.5.x86_64.rpm 78ae77851bcb3824abbc8aa5b88dbe174912504967db9988596463a59115edc9 bind-devel-9.3.6-25.P1.el5_11.5.i386.rpm cc7c15dbd9808577c9aaaca7c00ef839e9f9089f83464cdd6ecff71d624ae92d bind-devel-9.3.6-25.P1.el5_11.5.x86_64.rpm 4ab04d99036291cc60c905c591b8f0c4bd33253ab0c464217f9796aa84aa0ce4 bind-libbind-devel-9.3.6-25.P1.el5_11.5.i386.rpm 6652af1629265afcf4a22c6ddc1f9cd98da1d880b2d883f604f1609deaeae8d6 bind-libbind-devel-9.3.6-25.P1.el5_11.5.x86_64.rpm c0207497c021605575abba89a819a73d2a7f21ff1182111511b9494ee7ac9531 bind-libs-9.3.6-25.P1.el5_11.5.i386.rpm 23bfda6f1a4bcf3cf2f88d1efa06ce709ae41347050903c41ff6abd57caafec9 bind-libs-9.3.6-25.P1.el5_11.5.x86_64.rpm 2de6dbaf5a1b217d78ddb89c1aad6ccbb951e4e555992f95f3e9287b0886b15a bind-sdb-9.3.6-25.P1.el5_11.5.x86_64.rpm 6f4ae6d44b9840c7e84acdf3fd0ebc81444c7a6b347011afd0d6daa24ba9a1d8 bind-utils-9.3.6-25.P1.el5_11.5.x86_64.rpm 7ef7166742195d5ac49c2bb9d222ac57fcb6a33b57705a269f5d73eb8ca9961a caching-nameserver-9.3.6-25.P1.el5_11.5.x86_64.rpm Source: 9a65818d99a1d0beee5f80952a91e7588066375c164cd5a920c0bd47c4fec747 bind-9.3.6-25.P1.el5_11.5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: JohnnyCentOS ------------------------------ Message: 7 Date: Wed, 16 Dec 2015 22:38:40 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2015:2657 Critical CentOS 6 firefox Security Update Message-ID: <20151216223840.GA38522(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2015:2657 Critical Upstream details at : https://rhn.redhat.com/errata/RHSA-2015-2657.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: d878f9f3704a32b0f6a32031a6d2753fb71e62fa5cdb2946fba1387b83839713 firefox-38.5.0-2.el6.centos.i686.rpm x86_64: d878f9f3704a32b0f6a32031a6d2753fb71e62fa5cdb2946fba1387b83839713 firefox-38.5.0-2.el6.centos.i686.rpm ad885533c10648ffd203624dd51f6d066e4de23ece34439ed12b903b6e34a78c firefox-38.5.0-2.el6.centos.x86_64.rpm Source: 303db0ec83d7a6ea8fc31b43075a12c87a46f1dea5d7a63b99645a9d6876bc02 firefox-38.5.0-2.el6.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 8 Date: Thu, 17 Dec 2015 01:22:01 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2015:2657 Critical CentOS 5 firefox Security Update Message-ID: <20151217012201.GA30002(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2015:2657 Critical Upstream details at : https://rhn.redhat.com/errata/RHSA-2015-2657.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: b943b91d2dbce25e113aa719243add555b7498e06a2e4b66e6cedcbd6346c768 firefox-38.5.0-2.el5.centos.i386.rpm x86_64: b943b91d2dbce25e113aa719243add555b7498e06a2e4b66e6cedcbd6346c768 firefox-38.5.0-2.el5.centos.i386.rpm 2e7c936871b39cc73ed59b6bc6bfde2ddc699b986f8309f4fb82294cac8bf5b5 firefox-38.5.0-2.el5.centos.x86_64.rpm Source: 43039a4056e5fc8eac941e9820314cf3c14a1cae67c4ac42da85ce06def8b377 firefox-38.5.0-2.el5.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: JohnnyCentOS ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 130, Issue 6 ***********************************************

1 0

Re: [CentOS] getting Google Earth to work.
by Richard 17 Dec '15

17 Dec '15

> Date: Wednesday, December 16, 2015 21:30:31 -0500 > From: Fred Smith <fredex(a)fcshome.stoneham.ma.us> > > is a continual pain. > > I'm attempting to follow the instructions here: > http://forums.fedoraforum.org/showpost.php?p=1650497&postcount=27 > > (yes, I know it's a fedora forum (but the same stupid mistake > persists in the GE packages) but apparently the rpmrebuild binary > is nolonger available, at least not in Centos (specifically, > CentOS-7.2.1511). As I know little about all the various rpm > tools, I don't know how to do what is described there without > rpmrebuild. > > rpmbuild --rebuild seems to ONLY build from a source archive, so it > doesn't seem to do what I need. > > Advice appreciated! > > thanks in advance. > > Fred I don't see a "-rebuild" option used on the page you reference. Rather there's "-ep <local-rpm-file>.rpm", shown in "3.". Trying it just now worked. I got a warning on the rebuild, but a new .rpm was generated, which I was able to install and got google-earth to start up. If you follow the link on the second line ("I just had to follow the steps",) at the top of the page you reference, the description in "#32" seems to have all the necessary bits, including a link to an rpmrebuild .rpm that will install on centos 7.2 (aka .1511) system.

3 3

getting Google Earth to work.
by Fred Smith 17 Dec '15

17 Dec '15

is a continual pain. I'm attempting to follow the instructions here: http://forums.fedoraforum.org/showpost.php?p=1650497&postcount=27 (yes, I know it's a fedora forum (but the same stupid mistake persists in the GE packages) but apparently the rpmrebuild binary is nolonger available, at least not in Centos (specifically, CentOS-7.2.1511). As I know little about all the various rpm tools, I don't know how to do what is described there without rpmrebuild. rpmbuild --rebuild seems to ONLY build from a source archive, so it doesn't seem to do what I need. Advice appreciated! thanks in advance. Fred -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ---------------------------- Do you not know? Have you not heard? The LORD is the everlasting God, the Creator of the ends of the earth. He will not grow tired or weary, and his understanding no one can fathom. ----------------------------- Isaiah 40:28 (niv) -----------------------------

1 0

CentOS-announce Digest, Vol 130, Issue 5
by centos-announce-request＠centos.org 16 Dec '15

16 Dec '15

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2015:2640 CentOS 6 389-ds-base BugFix Update (Johnny Hughes) 2. CEEA-2015:2637 CentOS 6 oracleasm Enhancement Update (Johnny Hughes) 3. CEBA-2015:2642 CentOS 6 samba BugFix Update (Johnny Hughes) 4. CEBA-2015:2644 CentOS 6 selinux-policy BugFix Update (Johnny Hughes) 5. CEBA-2015:2635 CentOS 6 lvm2 BugFix Update (Johnny Hughes) 6. CEEA-2015:2630 CentOS 6 NetworkManager-openswan Enhancement Update (Johnny Hughes) 7. CEBA-2015:2643 CentOS 6 procps BugFix Update (Johnny Hughes) 8. CEBA-2015:2631 CentOS 6 crash BugFix Update (Johnny Hughes) 9. CEBA-2015:2632 CentOS 6 pcs BugFix Update (Johnny Hughes) 10. CEBA-2015:2633 CentOS 6 libvirt BugFix Update (Johnny Hughes) 11. CEBA-2015:2638 CentOS 6 logrotate BugFix Update (Johnny Hughes) 12. CEBA-2015:2629 CentOS 6 rsyslog7 BugFix Update (Johnny Hughes) 13. CEBA-2015:2641 CentOS 6 httpd BugFix Update (Johnny Hughes) 14. CEBA-2015:2639 CentOS 6 initscripts BugFix Update (Johnny Hughes) 15. CEBA-2015:2634 CentOS 6 ipa BugFix Update (Johnny Hughes) 16. CESA-2015:2636 Important CentOS 6 kernel Security Update (Johnny Hughes) 17. CEBA-2015:2646 CentOS 6 perl-LDAP FASTTRACK BugFix Update (Johnny Hughes) 18. CEBA-2015:2648 CentOS 6 unzip FASTTRACK BugFix Update (Johnny Hughes) 19. CEBA-2015:2647 CentOS 6 dvd+rw-tools FASTTRACK BugFix Update (Johnny Hughes) 20. CESA-2015:2653 Moderate CentOS 7 grub2 Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 15 Dec 2015 23:56:44 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:2640 CentOS 6 389-ds-base BugFix Update Message-ID: <20151215235644.GA54968(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:2640 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-2640.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: aec6cd9e627fc177dfce7393165b11c7d34072a625ed4efc05f469fcdc8f3284 389-ds-base-1.2.11.15-68.el6_7.i686.rpm 79bdd9891f88387c39cfcacbd0359118ea9159fb082f128352991af1eb55f6bb 389-ds-base-devel-1.2.11.15-68.el6_7.i686.rpm b88d935795dc9b394233f5cea3625a10f18b40eae2a7de965cf2bb4f4ce64d2c 389-ds-base-libs-1.2.11.15-68.el6_7.i686.rpm x86_64: 743d8a955ab2aaa324b90a5f35ed8e8aed3791aa310d05fd09b93bc0a94a696a 389-ds-base-1.2.11.15-68.el6_7.x86_64.rpm 79bdd9891f88387c39cfcacbd0359118ea9159fb082f128352991af1eb55f6bb 389-ds-base-devel-1.2.11.15-68.el6_7.i686.rpm f29c552ce47cf6ff343c83fdfae12556f6bf4ada45ba62505389380d127418cc 389-ds-base-devel-1.2.11.15-68.el6_7.x86_64.rpm b88d935795dc9b394233f5cea3625a10f18b40eae2a7de965cf2bb4f4ce64d2c 389-ds-base-libs-1.2.11.15-68.el6_7.i686.rpm b1028517f5c5083a07015ef8348b685eadf4576bc35626e2ef753f9be2408fba 389-ds-base-libs-1.2.11.15-68.el6_7.x86_64.rpm Source: d8fcf073e8431386043453489a8727d8de34b5687debcefbce0cd4e3db84c1ac 389-ds-base-1.2.11.15-68.el6_7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Tue, 15 Dec 2015 23:58:42 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEEA-2015:2637 CentOS 6 oracleasm Enhancement Update Message-ID: <20151215235842.GA55052(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2015:2637 Upstream details at : https://rhn.redhat.com/errata/RHEA-2015-2637.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: bfbec67eee5ecb78f168b0eafc59846d52113d0af964b2efeb531fe774623ac9 kmod-oracleasm-2.0.8-6.el6_7.x86_64.rpm Source: fd6ad905fc2f135851ee95984d4a38fb16ddf07a1df92cc4df332790ba624fcc oracleasm-2.0.8-6.el6_7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 3 Date: Tue, 15 Dec 2015 23:59:27 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:2642 CentOS 6 samba BugFix Update Message-ID: <20151215235927.GA55561(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:2642 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-2642.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 6fa40ca76f3ba80ad56ce80b2b2f787148f6d019ec15400e62871d4993bdf527 libsmbclient-3.6.23-21.el6_7.i686.rpm 625599db257396e87c28598ded4790e9d75d56f57e8cc4ce1e14199fb6ec7b1e libsmbclient-devel-3.6.23-21.el6_7.i686.rpm 373cb3699c06320927ec67e5f29f9688df04156be6e0132be8d4a998bf509522 samba-3.6.23-21.el6_7.i686.rpm 85366515becc9f8e6ccd8a314a63527a518b7f7aecf6637c63c0688872ee9ff7 samba-client-3.6.23-21.el6_7.i686.rpm 8afbaf1ecbb185050ea933af8afd05e4f5fc434a03ebebc007a57d4d9b84a91c samba-common-3.6.23-21.el6_7.i686.rpm 9d1ba1a9c42abedc77e20d712c3bcdff62fc693e29884d4fb5a983a8096298c6 samba-doc-3.6.23-21.el6_7.i686.rpm ea80fcbda34ed4349ac97590539a0018c81e18725ce3ebe0e3d6b6fb1e79bb75 samba-domainjoin-gui-3.6.23-21.el6_7.i686.rpm 326f83460105eb764821a3bfc800517b2fab53af6cdd77bffde220a0f5af522d samba-swat-3.6.23-21.el6_7.i686.rpm e78bfa330c5eeb6c3fc5fc1f10d449a2d361b3ee92b0ee99a1df398bc324b734 samba-winbind-3.6.23-21.el6_7.i686.rpm 1e7aad64b9c0c3b17bb560f9cded84cf0bfa690ea661fdf786f9fc95c8d4e856 samba-winbind-clients-3.6.23-21.el6_7.i686.rpm a2ee37041001132e7bf2b4ec1980e506cf572c722f6673f1f4a375deb29aea04 samba-winbind-devel-3.6.23-21.el6_7.i686.rpm 9078a90c96fbf8cb55ed516674b9d6ed21da3ed08e6bcb7ce5ffb3c1ecd2cf32 samba-winbind-krb5-locator-3.6.23-21.el6_7.i686.rpm x86_64: 6fa40ca76f3ba80ad56ce80b2b2f787148f6d019ec15400e62871d4993bdf527 libsmbclient-3.6.23-21.el6_7.i686.rpm 411b6cc17453662356b8356abfa04f16e216b8dd0ecef12f4cf76296ae288c6d libsmbclient-3.6.23-21.el6_7.x86_64.rpm 625599db257396e87c28598ded4790e9d75d56f57e8cc4ce1e14199fb6ec7b1e libsmbclient-devel-3.6.23-21.el6_7.i686.rpm 186ac187e0eb029adbb9552993a03329ed9aa55c913e1cb8941bd7a53180a894 libsmbclient-devel-3.6.23-21.el6_7.x86_64.rpm b4915ee153075ed938476f21a16a60d3c42c685e0cbc4bfb63c8be0bdbcdf4d1 samba-3.6.23-21.el6_7.x86_64.rpm d066ce5130196fa02ed530934169c1bc30c15d676e9f897e4df3382a8c39a323 samba-client-3.6.23-21.el6_7.x86_64.rpm 8afbaf1ecbb185050ea933af8afd05e4f5fc434a03ebebc007a57d4d9b84a91c samba-common-3.6.23-21.el6_7.i686.rpm bffa89443807a01d4e767e3af8ba5927ff857d3b5427d52a18f7f7af95bc47ca samba-common-3.6.23-21.el6_7.x86_64.rpm a433aec7b9263fde5936cda0eacff4d57232368380b2d45d9ac5abcaacdcab27 samba-doc-3.6.23-21.el6_7.x86_64.rpm f415411e26b24d2747f89511fd1e1453186ec25cf84d0addee16c81023b5b4e3 samba-domainjoin-gui-3.6.23-21.el6_7.x86_64.rpm 4263545084622e24104d103350fc2bc86883384c146bddce1376163d91a137d5 samba-glusterfs-3.6.23-21.el6_7.x86_64.rpm 63fd6c93eb3d5a5e3b14ebd9d0aea96df016626cb9e29b167ff14149991153bf samba-swat-3.6.23-21.el6_7.x86_64.rpm d8a22a59be8c160e6dc17928a0e1b3ced07848d913ebbfb9ccd04d73863dcd80 samba-winbind-3.6.23-21.el6_7.x86_64.rpm 1e7aad64b9c0c3b17bb560f9cded84cf0bfa690ea661fdf786f9fc95c8d4e856 samba-winbind-clients-3.6.23-21.el6_7.i686.rpm 0521435d7aca38e1548b8302e33b99969bb7a5bc57a82c2a4e57c31ce2f6f607 samba-winbind-clients-3.6.23-21.el6_7.x86_64.rpm a2ee37041001132e7bf2b4ec1980e506cf572c722f6673f1f4a375deb29aea04 samba-winbind-devel-3.6.23-21.el6_7.i686.rpm 93380c0ca11222077404032993ee19fdb4b447a8916d6fcc1443699494a82677 samba-winbind-devel-3.6.23-21.el6_7.x86_64.rpm 7399d7f7c767f4e860de3321947930e9ef3360e1eaeb0fe8dd3f3d026379802a samba-winbind-krb5-locator-3.6.23-21.el6_7.x86_64.rpm Source: e5586df8b8ae75a6311def2f3d335409940451ce8d00af4807bf8ef011ef48c8 samba-3.6.23-21.el6_7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 4 Date: Wed, 16 Dec 2015 00:00:13 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:2644 CentOS 6 selinux-policy BugFix Update Message-ID: <20151216000013.GA55861(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:2644 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-2644.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 35dbbda3cdd80e8186264e93e0c947b21c1cede072151ade0022a63e793b25c7 selinux-policy-3.7.19-279.el6_7.8.noarch.rpm 55f9e502f0cc9e6b60533daacd8671b0a04203c60bf40f1942efdb777a086032 selinux-policy-doc-3.7.19-279.el6_7.8.noarch.rpm ae6598209debcf65f8407018096f26873d5350d13b4bfc9d52bb8f17a11dd09d selinux-policy-minimum-3.7.19-279.el6_7.8.noarch.rpm 9819b128d6cfc9ffe77314739b22ea2d0a1697ec07a5eaa6d0ef459bb42ef645 selinux-policy-mls-3.7.19-279.el6_7.8.noarch.rpm 65d9d1186a217a450e4054f7f245774824e76e34d99f149e7db30a87731a9762 selinux-policy-targeted-3.7.19-279.el6_7.8.noarch.rpm x86_64: 35dbbda3cdd80e8186264e93e0c947b21c1cede072151ade0022a63e793b25c7 selinux-policy-3.7.19-279.el6_7.8.noarch.rpm 55f9e502f0cc9e6b60533daacd8671b0a04203c60bf40f1942efdb777a086032 selinux-policy-doc-3.7.19-279.el6_7.8.noarch.rpm ae6598209debcf65f8407018096f26873d5350d13b4bfc9d52bb8f17a11dd09d selinux-policy-minimum-3.7.19-279.el6_7.8.noarch.rpm 9819b128d6cfc9ffe77314739b22ea2d0a1697ec07a5eaa6d0ef459bb42ef645 selinux-policy-mls-3.7.19-279.el6_7.8.noarch.rpm 65d9d1186a217a450e4054f7f245774824e76e34d99f149e7db30a87731a9762 selinux-policy-targeted-3.7.19-279.el6_7.8.noarch.rpm Source: a931ced19d7471aaf04de5e13154172c8966021cd9c5609def1e50f223c0d6d7 selinux-policy-3.7.19-279.el6_7.8.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 5 Date: Wed, 16 Dec 2015 00:01:00 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:2635 CentOS 6 lvm2 BugFix Update Message-ID: <20151216000100.GA56344(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:2635 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-2635.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 2c0c96d6a8fd6a164e4d5998acdc84ee36c2d99561210dccec954217acf83ffe cmirror-2.02.118-3.el6_7.4.i686.rpm 8ea71a404c109b0e1ac47083ee703bf3a84d52b797a66979369466d82befc95d device-mapper-1.02.95-3.el6_7.4.i686.rpm deae0e0ca7228f42a8067316dff09a81f9025ab99f5bbf106f798b9e1b3706b0 device-mapper-devel-1.02.95-3.el6_7.4.i686.rpm da3aa6c0cebe3e149d3a5ceef9043ce50e6033aaae5b53f4b8efe9f2b9ccafc2 device-mapper-event-1.02.95-3.el6_7.4.i686.rpm 8b9b5297a24347283bc1a0d9bc45d36c2b197a72c5ee0731efbddc42d4705a28 device-mapper-event-devel-1.02.95-3.el6_7.4.i686.rpm 005d65d274b4fc8e1c64138bd9549b1c34ec680d13fc9e216dc3680b8b3475a5 device-mapper-event-libs-1.02.95-3.el6_7.4.i686.rpm 3b7f72a0ca8c3a85de1f4ec34e8d4ffa8e7906c31c0b8d95836fa13102e5e03a device-mapper-libs-1.02.95-3.el6_7.4.i686.rpm d96cc2bdd47fabc1f5d27e1a1c3d12afd98bf2181993d664fb0d8245728bb667 lvm2-2.02.118-3.el6_7.4.i686.rpm 092888ab6d78460a8fa940e613b5faf45e1a436debc8aef6c6f0182882ffdca2 lvm2-cluster-2.02.118-3.el6_7.4.i686.rpm ba1aaa1bed9f83c2908c0829639a65430bd6569053f543f57f175303f4819ede lvm2-devel-2.02.118-3.el6_7.4.i686.rpm 86c9fd27bf21dbf3dd8bb5c7bb276a6300a78b780b1af651402f69248d9211c2 lvm2-libs-2.02.118-3.el6_7.4.i686.rpm x86_64: 8639ab776867331d600200d09ed5cf5db7aff7bc6d5b799bfb8dfa01b8caa14e cmirror-2.02.118-3.el6_7.4.x86_64.rpm beec3c8cabf7544d623a9ac4dbdaee67bb433b707d4649c702ad511784f41410 device-mapper-1.02.95-3.el6_7.4.x86_64.rpm deae0e0ca7228f42a8067316dff09a81f9025ab99f5bbf106f798b9e1b3706b0 device-mapper-devel-1.02.95-3.el6_7.4.i686.rpm f4f7dc3dbf2143b40939b05c7e7c689b8428b312bd8f4818f0430054c0950a8d device-mapper-devel-1.02.95-3.el6_7.4.x86_64.rpm 1bf734c7b445e89c78440f82ef41995595c8c20abcd7d3d36ba5bc28a2e1ce6c device-mapper-event-1.02.95-3.el6_7.4.x86_64.rpm 8b9b5297a24347283bc1a0d9bc45d36c2b197a72c5ee0731efbddc42d4705a28 device-mapper-event-devel-1.02.95-3.el6_7.4.i686.rpm 25d8a121569563d79e323894a3c5117318690a06cacf2f5c8726a0bf5694a542 device-mapper-event-devel-1.02.95-3.el6_7.4.x86_64.rpm 005d65d274b4fc8e1c64138bd9549b1c34ec680d13fc9e216dc3680b8b3475a5 device-mapper-event-libs-1.02.95-3.el6_7.4.i686.rpm a768ac1af2e7613e82a2803dc27c9194bb341637c7124ef2e631f3b874b49f8e device-mapper-event-libs-1.02.95-3.el6_7.4.x86_64.rpm 3b7f72a0ca8c3a85de1f4ec34e8d4ffa8e7906c31c0b8d95836fa13102e5e03a device-mapper-libs-1.02.95-3.el6_7.4.i686.rpm c0b5f43c62c9871c171e7324643b057ddf8ca452ca6ca96c650a0cf335c445fb device-mapper-libs-1.02.95-3.el6_7.4.x86_64.rpm 08c2c5cf0a0bbefedd3232caaa06f3bf083d0ca44d1299dbd1df603f7b4e579f lvm2-2.02.118-3.el6_7.4.x86_64.rpm 8ab1fe080207132194511780ec10402c1c8f6605da5ff9b44c14341b96d0c39d lvm2-cluster-2.02.118-3.el6_7.4.x86_64.rpm ba1aaa1bed9f83c2908c0829639a65430bd6569053f543f57f175303f4819ede lvm2-devel-2.02.118-3.el6_7.4.i686.rpm 4722a33bc09bb7fec2ef611be20dbaeb8eed1be69c2f83f12c8d8b558b8a19de lvm2-devel-2.02.118-3.el6_7.4.x86_64.rpm 86c9fd27bf21dbf3dd8bb5c7bb276a6300a78b780b1af651402f69248d9211c2 lvm2-libs-2.02.118-3.el6_7.4.i686.rpm 6b65cece9b121dec80710e10fe34838bcdbcf20a8930bc7413b83434adad85c4 lvm2-libs-2.02.118-3.el6_7.4.x86_64.rpm Source: f45f8d9ab4ba85e8e64e26d41b35e147fdec25b3e980180513938e47b26ee385 lvm2-2.02.118-3.el6_7.4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 6 Date: Wed, 16 Dec 2015 00:01:24 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEEA-2015:2630 CentOS 6 NetworkManager-openswan Enhancement Update Message-ID: <20151216000124.GA56541(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2015:2630 Upstream details at : https://rhn.redhat.com/errata/RHEA-2015-2630.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: eaa7e72adf29d1b601d8a6ccc861193d1b72efad6f0383ff2e9efe715cd9bc1d NetworkManager-openswan-0.8.0-10.el6_7.i686.rpm x86_64: 3d5b78e19fd0918cf5dbe160e5f3a3c30e20fdee5cbc6aa8d8e9d61158efbc9f NetworkManager-openswan-0.8.0-10.el6_7.x86_64.rpm Source: c64036d084f4f631fbc645f9f47b779dcc9eb265f31cd04411e5f85ca6f918d3 NetworkManager-openswan-0.8.0-10.el6_7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 7 Date: Wed, 16 Dec 2015 00:01:56 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:2643 CentOS 6 procps BugFix Update Message-ID: <20151216000156.GA56773(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:2643 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-2643.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 221d901002d04191fe72c230d7d7fe082655e481bda4189b834b3519a772dc41 procps-3.2.8-35.el6_7.i686.rpm ad11881c26b0e9677c5b10794c55a12d5676b8e271bf9f99ab59659e0f1a9cf9 procps-devel-3.2.8-35.el6_7.i686.rpm x86_64: 221d901002d04191fe72c230d7d7fe082655e481bda4189b834b3519a772dc41 procps-3.2.8-35.el6_7.i686.rpm 8f03b5c803ffc261351a38cf320e143b4d8b162fb7d1e3c497c5022798ed95b5 procps-3.2.8-35.el6_7.x86_64.rpm ad11881c26b0e9677c5b10794c55a12d5676b8e271bf9f99ab59659e0f1a9cf9 procps-devel-3.2.8-35.el6_7.i686.rpm 7d3b505ae19e0f7a420b7d0a9c2ca43c212294604d39ed1306451ae3f09eb806 procps-devel-3.2.8-35.el6_7.x86_64.rpm Source: 581d5aa29442c8c58c7121b1387932d5b4ea151ac83d7bb8881cdb3fa9c26b3c procps-3.2.8-35.el6_7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 8 Date: Wed, 16 Dec 2015 00:02:27 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:2631 CentOS 6 crash BugFix Update Message-ID: <20151216000227.GA56984(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:2631 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-2631.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 7cedfd6ba95e7d611ab77d553b24097953f17ea41278923e5c4dcedf1fd0e548 crash-7.1.0-3.el6_7.i686.rpm b19295aaaa07ffb8c025b297dbfb21f7915f934ad69f3dccb8f52da43e2d2bee crash-devel-7.1.0-3.el6_7.i686.rpm x86_64: 60c5dd9fb6bbb8552e6a124fedf49a0e08a1599e27d9102cbb35773b3c133272 crash-7.1.0-3.el6_7.x86_64.rpm b19295aaaa07ffb8c025b297dbfb21f7915f934ad69f3dccb8f52da43e2d2bee crash-devel-7.1.0-3.el6_7.i686.rpm c889725ffa3088441d2f78e7901206d27e3c0e1388be690544b0976706f57e2f crash-devel-7.1.0-3.el6_7.x86_64.rpm Source: 3dc6753183df7042e187c8ee275c202fbd3783734296c8298d25c1f952c33db7 crash-7.1.0-3.el6_7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 9 Date: Wed, 16 Dec 2015 00:03:04 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:2632 CentOS 6 pcs BugFix Update Message-ID: <20151216000304.GA57172(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:2632 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-2632.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 1172cf519d9d5decd00457dc3c18fca0db880b067a52753c884129dc1c0fc1f7 pcs-0.9.139-9.el6_7.2.i686.rpm x86_64: 1992b58afcfb4c48ad034884f57da4433b4ee716bb936d196f0ee2cd05d59a7d pcs-0.9.139-9.el6_7.2.x86_64.rpm Source: c64febbda2f9ec6b7bdc6b89a4d9a5254d09add84c267ce9f2d4aab6fc5d75b5 pcs-0.9.139-9.el6_7.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 10 Date: Wed, 16 Dec 2015 00:03:32 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:2633 CentOS 6 libvirt BugFix Update Message-ID: <20151216000332.GA57447(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:2633 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-2633.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: dba17fb94d4bf850835955fdc2d17d32acb69292e176e9f70c7532c858f3d015 libvirt-0.10.2-54.el6_7.3.i686.rpm 51b29e45b5a19dbf8cb49b24100e1804ad349e39de40c78af4c8615b7d4a2c00 libvirt-client-0.10.2-54.el6_7.3.i686.rpm 0130f4d58750c597a09c1f54c74dc5e055f557b48ed1a5d20399b2a0db2d359f libvirt-devel-0.10.2-54.el6_7.3.i686.rpm 81ff855c3873cea1f5dcf2da7d8e7c2c493cdf4bf1319a532ee1bb86d79a6ef0 libvirt-python-0.10.2-54.el6_7.3.i686.rpm x86_64: 8ec2d4a231d8bd1f2ff1001a913216eada3851c17d9d70f29257ddd0210d393e libvirt-0.10.2-54.el6_7.3.x86_64.rpm 51b29e45b5a19dbf8cb49b24100e1804ad349e39de40c78af4c8615b7d4a2c00 libvirt-client-0.10.2-54.el6_7.3.i686.rpm 955b971a884e1b3594065aed2ba5a767d95ae123521b3a1f256f74116280309d libvirt-client-0.10.2-54.el6_7.3.x86_64.rpm 0130f4d58750c597a09c1f54c74dc5e055f557b48ed1a5d20399b2a0db2d359f libvirt-devel-0.10.2-54.el6_7.3.i686.rpm 0d3af6c539b1af08a3cb228a3122de00c26272c457c16706b0b140b6e7ae4e54 libvirt-devel-0.10.2-54.el6_7.3.x86_64.rpm 7b92d0285c10c5f01487375362bcc0b411f328679fbbcdc3ec57b7b0c0ecedf7 libvirt-lock-sanlock-0.10.2-54.el6_7.3.x86_64.rpm beb4ced3e9153e981353f11375daebe7e85142041eb08949676784e86f69136f libvirt-python-0.10.2-54.el6_7.3.x86_64.rpm Source: 5743a0a3a195c1f473fee6e327870ff031a260d13ae6174c25b5f3ccadfae432 libvirt-0.10.2-54.el6_7.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 11 Date: Wed, 16 Dec 2015 00:03:58 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:2638 CentOS 6 logrotate BugFix Update Message-ID: <20151216000358.GA57649(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:2638 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-2638.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 00817dc771b63741d1ed40898e944e7d0c7bb0e800b0f853f8fa5a6f4020d3b7 logrotate-3.7.8-26.el6_7.i686.rpm x86_64: 111c2ec5fbe1128ba59efe1f033b8739b85cecee05955e0b1101c8404a6b89a0 logrotate-3.7.8-26.el6_7.x86_64.rpm Source: 9d033ac1a7bd5fb25ab3204abd2e38b175c0efe0067028642159fef2d246c96c logrotate-3.7.8-26.el6_7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 12 Date: Wed, 16 Dec 2015 00:04:24 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:2629 CentOS 6 rsyslog7 BugFix Update Message-ID: <20151216000424.GA57975(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:2629 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-2629.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 1309baadfd39ae686a65db846551b5b0c5d2b4bf160b91d98ccd7d52d6597639 rsyslog7-7.4.10-3.el6_7.1.i686.rpm eedf75f92d2403414e053c04460918ce370a5e20dc05105dffd46d27ada31109 rsyslog7-elasticsearch-7.4.10-3.el6_7.1.i686.rpm dbe62da6502c2f40fafbc97beba35784a0d83bdaa15db002d4607f1a764a2a23 rsyslog7-gnutls-7.4.10-3.el6_7.1.i686.rpm 73e8275eb8081fa23e957e1bff2d06c1bafb5e4ffca5f65484a9943a1d5b9260 rsyslog7-gssapi-7.4.10-3.el6_7.1.i686.rpm 9b7d5e4d864d01a00d286e98411744648133132293acf5902e473531d5c89b4b rsyslog7-mysql-7.4.10-3.el6_7.1.i686.rpm 5320dc5f5ba4ba4e04d63eff7c1640c72794e32b835ac2d4d3e36632d2dc4388 rsyslog7-pgsql-7.4.10-3.el6_7.1.i686.rpm 5e92600ff07a125ca0cd1db1d0a7afedc95ef331a2197ae51a65ad3cc61ab63e rsyslog7-relp-7.4.10-3.el6_7.1.i686.rpm 072d14ea18ad34527f26b8cbd3940a98f31529e9a5de2bd139532dc748f8b4a9 rsyslog7-snmp-7.4.10-3.el6_7.1.i686.rpm x86_64: 12137ec2da1ee22279afd41624ff2e1b020b04564b628cd59f5f1c2d746b8430 rsyslog7-7.4.10-3.el6_7.1.x86_64.rpm 8b52dfd2396ba7df45db9b5b99d2018787c4aa1320b032237fe460a162616904 rsyslog7-elasticsearch-7.4.10-3.el6_7.1.x86_64.rpm 2a26a381eb59aa4941bea0109a28be78ecefea2d91792b570c415fdf6ad61255 rsyslog7-gnutls-7.4.10-3.el6_7.1.x86_64.rpm 1a9c86c1b82a06dcf4d9fb87e2cad565c3d9a00877c48e6d536040a799bd302e rsyslog7-gssapi-7.4.10-3.el6_7.1.x86_64.rpm ed5f370bb371be3c07e4920a5f5df121bf21f6563819ee4538a3d0d73254fb60 rsyslog7-mysql-7.4.10-3.el6_7.1.x86_64.rpm f4b6e6ac80f8501c4287c481935edd74714ad8db4efde2c14092f0c0be5587cb rsyslog7-pgsql-7.4.10-3.el6_7.1.x86_64.rpm c837830eab05c03234cde018221a735ad8cc9b4eac306ca6b353789a3d5b518a rsyslog7-relp-7.4.10-3.el6_7.1.x86_64.rpm 7cfdef363d834a1ff954f6f11010dcdda9aeee87da1353dfa16d82e369a0903e rsyslog7-snmp-7.4.10-3.el6_7.1.x86_64.rpm Source: 3bbb4e865152f508d66a90faa4489d9ab6902443a5c1d7a74cd3fa02e59ee589 rsyslog7-7.4.10-3.el6_7.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 13 Date: Wed, 16 Dec 2015 00:05:05 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:2641 CentOS 6 httpd BugFix Update Message-ID: <20151216000505.GA58277(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:2641 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-2641.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: c34ef378ead0832f0495514b2d88f08e0d2e7d576bfaa876f55347e58151a8ee httpd-2.2.15-47.el6.centos.1.i686.rpm 5cf7efbab042724eb2b003f40bf20b8667f1389e40a6956024916eefe153200e httpd-devel-2.2.15-47.el6.centos.1.i686.rpm d0b9131a6b032114e97fa5f9acc2377d8e7373d51ac767285ecdcf7708c5df91 httpd-manual-2.2.15-47.el6.centos.1.noarch.rpm a46cae27a02047a0ed5989588d4c83b2799e20994425aec64b7208f3081915a1 httpd-tools-2.2.15-47.el6.centos.1.i686.rpm 831db95227c2f4530d1673be56d9849bd58ab8b4ab10fbfa44b535adc85fc808 mod_ssl-2.2.15-47.el6.centos.1.i686.rpm x86_64: f78d065c56544c7090108f5d69c1167ad7c611e010ee2a9c3fc6ee70c1377603 httpd-2.2.15-47.el6.centos.1.x86_64.rpm 5cf7efbab042724eb2b003f40bf20b8667f1389e40a6956024916eefe153200e httpd-devel-2.2.15-47.el6.centos.1.i686.rpm 9dae9e189aa262fc5c853a7ade9fd3e1f52d196d8d0fc6a132e8b2beb697eea4 httpd-devel-2.2.15-47.el6.centos.1.x86_64.rpm d0b9131a6b032114e97fa5f9acc2377d8e7373d51ac767285ecdcf7708c5df91 httpd-manual-2.2.15-47.el6.centos.1.noarch.rpm 6ed72ea5d197ec5e9cb43f2c8630665dc1487ef4b436033b3b56c2ce2c66f124 httpd-tools-2.2.15-47.el6.centos.1.x86_64.rpm 2397e61985c97e29c475433ca004ebac80ba91040f7a7355ca7c029202fa5a75 mod_ssl-2.2.15-47.el6.centos.1.x86_64.rpm Source: 7c390476174a8f8bd7a5011d71cb6c0595854ce7f666edd48308eabffd27fa40 httpd-2.2.15-47.el6.centos.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 14 Date: Wed, 16 Dec 2015 00:05:32 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:2639 CentOS 6 initscripts BugFix Update Message-ID: <20151216000532.GA58491(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:2639 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-2639.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 7307112f323038c2ee2a8dbbb3abcc8b13a088c9e8e455db7c550d0f20b1fb11 debugmode-9.03.49-1.el6.centos.3.i686.rpm 074edd127084a5f6404ef2a2b01dda214762a2985a4be17fd900f348142fd6fd initscripts-9.03.49-1.el6.centos.3.i686.rpm x86_64: 807d7528db7080dcefd1dffce8475c221bdb8fb293fe81c6cd92954634016e18 debugmode-9.03.49-1.el6.centos.3.x86_64.rpm 10279f0bc50754f70082cacdba6051fc1f14dc64072f32c0b4b20bc3f7f31980 initscripts-9.03.49-1.el6.centos.3.x86_64.rpm Source: 769a4afca60917ad65c0b2fced67c9e12eeeda0846dfed547c0587253466e109 initscripts-9.03.49-1.el6.centos.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 15 Date: Wed, 16 Dec 2015 00:06:04 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:2634 CentOS 6 ipa BugFix Update Message-ID: <20151216000604.GA58798(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:2634 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-2634.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 8dfc0bfb0e368d8ce7a28a7daa88ed6b702139cb43779af2614b8db1dc9b9d27 ipa-admintools-3.0.0-47.el6.centos.1.i686.rpm cdac5cc13a592201146fe7294505be4ce938a92d581c062f30e7351b02794fc5 ipa-client-3.0.0-47.el6.centos.1.i686.rpm ca8ae8bbc3b3c77e66cc55e1d8f2a0ff7be866143e6984fd3c5491a0a17f071f ipa-python-3.0.0-47.el6.centos.1.i686.rpm a72dad700e1f918405419d7dbf6dd213105cc1528163629bf4cc2bd63affcd0f ipa-server-3.0.0-47.el6.centos.1.i686.rpm e83bffee6efe0108e5129222f990f10c7f9974d26d529271472cf5d0a23034af ipa-server-selinux-3.0.0-47.el6.centos.1.i686.rpm dc11242bbdd50111e8a4f21fcae99950b48ddd379d32664cfcabc6a8bc9a78f0 ipa-server-trust-ad-3.0.0-47.el6.centos.1.i686.rpm x86_64: 16e4fa746b6bc48d821bda0340a7f516eedf90719b24a0e6a13a22346cb7540e ipa-admintools-3.0.0-47.el6.centos.1.x86_64.rpm e9a32d3a94283d0994ecdd62e866503c1ba7cfb3464fd3af3d504a4c499529d3 ipa-client-3.0.0-47.el6.centos.1.x86_64.rpm 7a4af16890cd98a019731ce1a97749f958dc9ac4a6650962084656a594942300 ipa-python-3.0.0-47.el6.centos.1.x86_64.rpm 5796caad92ab5609ab22d0b7972c49470c36878621d18db68739a93d5ec42c81 ipa-server-3.0.0-47.el6.centos.1.x86_64.rpm 4d313a63f63be7d7a029c9b7ccaf7cad7fa3e47b984fcf5fe1bd01f95c9f2101 ipa-server-selinux-3.0.0-47.el6.centos.1.x86_64.rpm 02205e56e7e69526bc23befbb461a84f2e336964eab018c425d2e409bf5df9c4 ipa-server-trust-ad-3.0.0-47.el6.centos.1.x86_64.rpm Source: 44e55bea8dc526b6569b956c9dc7f58161aea6c0a429c6d1598e65b469a6c943 ipa-3.0.0-47.el6.centos.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 16 Date: Wed, 16 Dec 2015 00:07:51 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2015:2636 Important CentOS 6 kernel Security Update Message-ID: <20151216000751.GA59234(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2015:2636 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2015-2636.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 08a3881a331e0147dba2e8adbbb9e2383e11043e0d4bc8eb590e3316ce1bbf3e kernel-2.6.32-573.12.1.el6.i686.rpm 722215736c71bbd99f017636c7653bc74c6a3b0d95ff2852fb658189751935bc kernel-abi-whitelists-2.6.32-573.12.1.el6.noarch.rpm aff1ca2d87de43b4baf620a7109f28d4d988897b2508c436456781c54973833e kernel-debug-2.6.32-573.12.1.el6.i686.rpm 52aa7b57b9c42bd80e87309c07dd8b2c82a1260dd016c8b21ea29818c8f3748d kernel-debug-devel-2.6.32-573.12.1.el6.i686.rpm d6584dedfa1bbdec3a4e3dbd9afaf291db744d86f9f98e8728359ed06a704c3d kernel-devel-2.6.32-573.12.1.el6.i686.rpm 0e27624725a46d457cb9581934a88ed1d198418ecaa847d3ebfb88d3af3cf454 kernel-doc-2.6.32-573.12.1.el6.noarch.rpm 00c538233e8572fa9ba085b6c308dc169c0a779884195b0f5380c8220428fc51 kernel-firmware-2.6.32-573.12.1.el6.noarch.rpm 58c0e63ff1b899a30377f09a9edb172e53cc84eca258d0bbc2ff18d83086468e kernel-headers-2.6.32-573.12.1.el6.i686.rpm 5b90155f6d7c4dde0142fd7e19a68c014dc5c76b0b11add80120c8325da7937b perf-2.6.32-573.12.1.el6.i686.rpm f2b199f012c0e58c37c4cb309367e1f709fa4ad804bdb764dcc9f5066230b56c python-perf-2.6.32-573.12.1.el6.i686.rpm x86_64: 2049c671772566932bff2071b7614ec9657a1909b54f02eaf061bec3b655b975 kernel-2.6.32-573.12.1.el6.x86_64.rpm 722215736c71bbd99f017636c7653bc74c6a3b0d95ff2852fb658189751935bc kernel-abi-whitelists-2.6.32-573.12.1.el6.noarch.rpm 9856d5b7e763214eaaa5c17a270ce25c2de8eef361f35cdcd7c46761ba51400c kernel-debug-2.6.32-573.12.1.el6.x86_64.rpm 52aa7b57b9c42bd80e87309c07dd8b2c82a1260dd016c8b21ea29818c8f3748d kernel-debug-devel-2.6.32-573.12.1.el6.i686.rpm 595a8ed5e76cdd8ef19f4c670e66e7e0f6139fb496b5044c3ab89e06df9a196a kernel-debug-devel-2.6.32-573.12.1.el6.x86_64.rpm f418c504740b20dfd46fd02a9aa93cfdbd0b802a389c71256ab7819087b61a26 kernel-devel-2.6.32-573.12.1.el6.x86_64.rpm 0e27624725a46d457cb9581934a88ed1d198418ecaa847d3ebfb88d3af3cf454 kernel-doc-2.6.32-573.12.1.el6.noarch.rpm 00c538233e8572fa9ba085b6c308dc169c0a779884195b0f5380c8220428fc51 kernel-firmware-2.6.32-573.12.1.el6.noarch.rpm dcb27d50fce3d4b8a6f6e0769332852a7221081fbfdab44ae2671513f36a63fc kernel-headers-2.6.32-573.12.1.el6.x86_64.rpm c1b0ec00ffa6e3e826087bd24150ffed458fb3ad4c8b82f9d9e8252921a739d6 perf-2.6.32-573.12.1.el6.x86_64.rpm 9f4535784559270eaf8c798c394807de9940acf36a2f034e892c5e2bb3f483d2 python-perf-2.6.32-573.12.1.el6.x86_64.rpm Source: fbb60b14b498858173375845e531f61303f40e62a697bfdb6cc8ff2422bc8df6 kernel-2.6.32-573.12.1.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 17 Date: Wed, 16 Dec 2015 00:11:23 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:2646 CentOS 6 perl-LDAP FASTTRACK BugFix Update Message-ID: <20151216001123.GA61980(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:2646 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-2646.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 42523a0ac0d9d3b45ebcb6d4c7d1ade6078cf7e84637b5bacd8e7366b4305e60 perl-LDAP-0.40-2.el6.noarch.rpm x86_64: 42523a0ac0d9d3b45ebcb6d4c7d1ade6078cf7e84637b5bacd8e7366b4305e60 perl-LDAP-0.40-2.el6.noarch.rpm Source: 484e8c86ba7f0146b08be88295a1e1f3794e99a8842503a66abc9a62f4bac2ec perl-LDAP-0.40-2.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 18 Date: Wed, 16 Dec 2015 00:11:47 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:2648 CentOS 6 unzip FASTTRACK BugFix Update Message-ID: <20151216001147.GA62820(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:2648 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-2648.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: bc75df824f61fdb452221ebb69653b2fdd9329cb16dbe069e9fa506055c29612 unzip-6.0-4.el6.i686.rpm x86_64: 21cbf738e11dd401c608187487fbd9e2dcc808813965544333971f69788816b9 unzip-6.0-4.el6.x86_64.rpm Source: bfc2a0a346e99c7d5a7208e079d00073821708663377f391f5e9ed2fd67078fe unzip-6.0-4.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 19 Date: Wed, 16 Dec 2015 00:12:10 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:2647 CentOS 6 dvd+rw-tools FASTTRACK BugFix Update Message-ID: <20151216001210.GA63172(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:2647 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-2647.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 8449bfc8305ceabf7e14afcd0a623627cde64ba8bebe8bac676932f8ff8b8011 dvd+rw-tools-7.1-7.el6.i686.rpm x86_64: 39b09d0fb9a70c107360d999be92535b25a8f2b6fb92b752ca56617349c715b0 dvd+rw-tools-7.1-7.el6.x86_64.rpm Source: 91264c2f7dce0d97cb5c5087cef13344d5ff62dc1f9a56187d692cdada6cf97a dvd+rw-tools-7.1-7.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 20 Date: Wed, 16 Dec 2015 02:26:44 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2015:2653 Moderate CentOS 7 grub2 Security Update Message-ID: <20151216022644.GA13973(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2015:2653 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2015-2623.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 8603042073286061d4ec3757b5e940aa5e5bbfca1f7f114d8cbaf9e3d27db4e7 grub2-2.02-0.33.el7.centos.1.x86_64.rpm e2985a01c8c879c855eee9cb61e57ac509ceebc56f6911ee981465e4709e8430 grub2-efi-2.02-0.33.el7.centos.1.x86_64.rpm f0c0fe813776cc3b948f87fbbe82370f7944babf2ce22d4328379a46f5b2eb7c grub2-efi-modules-2.02-0.33.el7.centos.1.x86_64.rpm 2448ae6c196944fa938a34112fa77d37726ba92db51c362fe1b21c905c43f265 grub2-tools-2.02-0.33.el7.centos.1.x86_64.rpm Source: e729b0d48dd2f3ca80b2fccf2defa3bd39b3e541b525bc89d56cbef9c6d0396e grub2-2.02-0.33.el7.centos.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 130, Issue 5 ***********************************************

1 0

Dumb CentOS 7 question
by m.roth＠5-cent.us 15 Dec '15

15 Dec '15

How do you restart Xorg? I can't find a target for it, and restarting graphical.target doesn't seem to do it. mark

6 11

Upgrade from CentOS6.6 to CentOS 7
by Traiano Welcome 15 Dec '15

15 Dec '15

Hi All Is it possible to upgrade from CentOS 6.7 to CentOS 7? I see there is some attempt at an upgrade tool available, but it's apparently broken: https://wiki.centos.org/TipsAndTricks/CentOSUpgradeTool Would anyone be able to recommend a manual upgrade procedure to upgrade a minimal CentOS 6.7 system to one or other version of CentOS 7? Many thanks in advance, Traiano

6 13

boot thumbdrive with CentOS 7 ISO???
by ken 15 Dec '15

15 Dec '15

The big picture is I'm wanting to boot centos 7 and install kvm. So far I've created on this new laptop a big, empty partition; in the BIOS enabled legacy booting and disabled UEFI; also in BIOS under Legacy Boot Order set "USB diskette on key/USB hard disk" on second priority. I've tried to boot from a usb thumbdrive three times and it failed all three times. I'm not understanding what's wrong. I tried all three methods below as root using CentOS 5.11, copied it to the thumbdrive with: dd if=CentOS-7-x86_64-Everything-1503-01.iso of=/dev/sda bs=1024 (Tried this because some webpage said) isohybrid CentOS-7-x86_64-Everything-1503-01.iso dd if=~CentOS-7-x86_64-DVD-1503-01.iso of=/dev/sda None of these successfully booted. Instead they ignored the flash drive as it wasn't there. Documentation in various webpages I found gave different recipes for creating the thumbdrive contents (many of which didn't make sense to me). Does anyone have experience with success with this...? Thanks much. PS. Also in the BIOS, should I enable Virtualization Technology? I'm sorting guess I should. The Windows docs recommend not to. I'm thinking though it would be preferred for KVM. What's the certain verdict?

5 17

Postfix and LDAP
by Ranbir 15 Dec '15

15 Dec '15

Hi Everyone, I thought I'd try asking here before joining the postfix mail list since I'm running postfix on a CentOS 7 box. I want to look up accounts via LDAP (an IPA server also on CentOS 7). I created an "ldap_aliases" file and successfully tested it with the postmap command: I can get the email address for an arbitrary user. But, when I add the very same file to main.cf, I don't see anything in the normal or debug logs for postfix that would indicate postfix is even trying to do a ldap lookup. Here are the relevant configs: # Virtual domains virtual_mailbox_base = /var/spool/mail virtual_mailbox_maps = hash:/etc/postfix/virtual_mailbox virtual_mailbox_domains = thesandhufamily.ca virtual_alias_maps = hash:/etc/postfix/virtual, hash:/etc/mailman/virtual-mailman, ldap:/etc/postfix/ldap_aliases NB: I believe I don't need to use ldap for virtual_mailbox_maps and virtual_mailbox_domains, but I could be wrong. All I get is errors like this: Dec 14 09:53:35 mailman01 postfix/lmtp[31011]: A968CC2516D: to=<ranbir(a)thesandhufamily.ca>, relay=10.200.5.24[10.200.5.24]:24, delay=1.1, delays=0.78/0/0.01/0.27, dsn=5.1.1, status=bounced (host 10.200.5.24[10.200.5.24] said: 550 5.1.1 <ranbir(a)thesandhufamily.ca> User doesn't exist: ranbir(a)thesandhufamily.ca (in reply to RCPT TO command)) Am I supposed to enable something else in postfix to make ldap work? What I've read about this seems to indicate I'm doing it correctly. -- Ranbir

2 1

CentOS 7 (1511) is released
by Johnny Hughes 15 Dec '15

15 Dec '15

See this announce mail here: https://lists.centos.org/pipermail/centos-announce/2015-December/021518.html Since it butchered the links, you can get ISOs here: http://isoredirect.centos.org/centos/7/isos/x86_64/ You can upgrade with 'yum update' Release notes here: http://wiki.centos.org/Manuals/ReleaseNotes/CentOS7 Enjoy, Johnny Hughes

11 15

Centos 6: qemu-kvm: Install guest win10 on host Centos 6
by Dario Lesca 15 Dec '15

15 Dec '15

I have try to install from iso Windows 10 on a centos 6 + qemu/kvm, but the guest not start and reboot after a while. Form this page: http://www.linux-kvm.org/page/Guest_Support_Status#Guest_Support_Status I understand that I must install at least qemu-kvm-2.3.0, but on the server (up to date) is installed qemu-kvm-0.12.1.2-2.479.el6_7.2 and there are no other updates. I can upgrade the server to Centos 7, but on Centos7 the max newer version of qemu-kvm is 1.5.3-105.el7_2.1 My question is: there is some way to install on Centos 6 up to date Windows 10, or I must upgrade / install Fedora 23 server (qemu-kvm- 2.4.1-3.fc23.x86_64) Many thanks for reply -- Dario Lesca (inviato dal mio Linux Fedora 23 Workstation)

2 1

CentOS 7, yum-cron
by m.roth＠5-cent.us 15 Dec '15

15 Dec '15

Hi, folks, Our bastion host decided to update itself in the middle of the night, which gave at least one user issues. So, the question is why? In both /etc/yum/yum-cron-hourly.conf and /etc/yum/yum-cron.conf, apply_updates = no. Has anyone else seen this? mark

1 0

libreoffice 4.4 or 5 in CentOS 6
by Patrick Bervoets 15 Dec '15

15 Dec '15

I need the ability to make signed PDFs in LibreOffice, so I tried LO 5 and LO 4.4 rpms from LO.org but they are useless (menu and toolbar are black). Anyone been able to use a higher version of LO? Thanks

6 11

Re: [CentOS] libreoffice 4.4 or 5 in CentOS 6
by James B. Byrne 15 Dec '15

15 Dec '15

On Mon, December 14, 2015 15:43, Patrick Bervoets wrote: > I need the ability to make signed PDFs in LibreOffice, so I tried LO 5 > and LO 4.4 rpms from LO.org but they are useless (menu and toolbar are > black). > Anyone been able to use a higher version of LO? > > Thanks > > I am running LO-5.0.3.2 on CentoS-6.7. without any known issues. -- *** e-Mail is NOT a SECURE channel *** Do NOT transmit sensitive data via e-Mail James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

1 0

Wifi Driver Broadcom BCM4322 not working with Centos 7.2
by melkor.kp 15 Dec '15

15 Dec '15

Hi, I've been using in the past the broadcom wifi card BCM4322 with Centos 7.1 one in the past, with kernel 3.10.0-229.7.2.el7 and driver 6_30_223_248 and it worked well. Now I updated Centos to 7.2 and the driver is not compiling any more under kernel 3.10.0-327.3.1.el7. Neither driver 6_30_223_238 nor 6_30_223_271. Does any body experienced the same issues? Cheers, Roberto Nebot -- It's a dangerous business, Frodo, going out your door. You step onto the road, and if you don't keep your feet, there's no knowing where you might be swept off to. Bilbo Baggins. http://vanishedintheshell.apsila.org <http://vanishedintheshell.blogspot.com>

2 2

boot order items
by Wes James 15 Dec '15

15 Dec '15

Just side note, when I boot with 7.2 now it has (Core) with Debugging before (Core) now. All the others are the other way around. Also, on my 2011 iMac, the 7.2 kernel won’t boot. I had to go back to the latest I had with 7.1. This has happened in the past, but some time later a newer kernel started working. Thanks, -wes

2 2

curious numbering (way off-topic, levity)
by Zube 15 Dec '15

15 Dec '15

Latest CentOS: 7.2-1511 Latest Win10: Version 1511 Hmm. :) Cheers, Zube

1 0

Re: [CentOS] firewalld clue needed
by Nicholas Geovanis 14 Dec '15

14 Dec '15

>> I don't really understand the intent behind firewalld. The RHEL7 Security >> Guide states "A graphical configuration tool, *firewall-config*, is used to >> configure firewalld, which in turn uses *iptables tool* to communicate with >> *Netfilter* in the kernel which implements packet filtering". >Well, the order from Kernel inside outward is: > >1. Netfilter (inside Kernel), not directly accessible by userland >2. iptables/iptables6, the userland cli tools to manipulate the Netfilter > .... >3. firewalld(RedHat/CentOS), or SuSEfirewall(Suse), or similar are the > .... >4. GUI tools, that allow to manipulate the config of firewalld (or similar), .... >Does that answer your question about *value added* by GUI tools? >Not every user that needs to change firewall settings is a certified UNIX admin. I don't dispute the value of GUIs. I have a comment and a question, first that in "the data center" my experience is that iptables rules are put into place and only rarely changed thereafter, like the network configuration at the server. But my question was partly this: What is the specific need for a continuously running daemon firewalld if what we wanted was a GUI front-end for iptables? Thanks....Nick Geo

3 2

rpm requires logic
by Leon Fauster 14 Dec '15

14 Dec '15

Exists the possibility to define an RPM requires statement with a logic? Like: Requires: mysql-server OR mysql55-mysql-server MTAs like postfix have "Provides: MTA" to provide such facility. I do not see such possibility for DB packages ... Thanks -- LF

2 2

CentOS 7, NetworkMangler
by m.roth＠5-cent.us 14 Dec '15

14 Dec '15

This is annoying. I yum removed NetworkManager-wifi... and I'm still getting this junk in the logs: MetworkManager[7723]: <warn> error requesting auth for org.freedesktop.NetworkManager.enable-disable-wifi: (0) Authorization check failed: GDBus.Error:org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus) Anyone have a clue as to what or why this is happening? I won't even mention the same for -wwan, and "sleep-wake". mark

1 0

tsocks or equivalent for CentOS 7
by Leroy Tennison 13 Dec '15

13 Dec '15

Does such exist? I looked for dante and couldn't find that. I found and tried using a version from CentOS 6 but it didn't work. If anyone can point me to an rpm (or set of same) I would most certainly appreciate it. Thanks. Confidentiality Notice | This email and any included attachments may be privileged, confidential and/or otherwise protected from disclosure. Access to this email by anyone other than the intended recipient is unauthorized. If you believe you have received this email in error, please contact the sender immediately and delete all copies. If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.

3 4

CentOS 7 Lost NIC
by Günther J. Niederwimmer 13 Dec '15

13 Dec '15

Hello, I have a big problem with my servers. I have 4 NIC on all my KVM Servers but the most time on a start (restart) I lost one NIC? It is not always the same, but this two are virtio NICs. with ifup eth0(1) the system say,I have no configured eth0 or eth1 file ? Can any tell me what I can do? thank's for a answer NetworkManager is disabled. -- mit freundlichen Grüßen / best regards, Günther J. Niederwimmer

2 4

Need firewalld clue
by Nicholas Geovanis 13 Dec '15

13 Dec '15

I don't really understand the intent behind firewalld. The RHEL7 Security Guide states "A graphical configuration tool, *firewall-config*, is used to configure firewalld, which in turn uses *iptables tool* to communicate with *Netfilter* in the kernel which implements packet filtering". So is the goal for firewalld to implement a GUI for iptables? What is the "value added" by firewalld? Thanks....Nick Geo

3 2

CentOS 7, NetworkMangler, and ipv6
by m.roth＠5-cent.us 11 Dec '15

11 Dec '15

We've started having a problem with a CentOS 7 server. It looses its IPv6 address, if I understand this issue correctly. We can get in, if we do ssh -4, though. In the logs, I'm seeing this about twice an hour: <warn> (pid 98466) unhandled DHCP event for interface ens3f0 Now, in googling, I get very few hits putting quotes around "unhanded dhcp exception" - in fact, the only one I found that seemed to talk about it was from someone's slackware box, where there was some sort of configuration, perhaps similar to ifcfg-<if>, and they were telling that person to remove it, because it conflicted with what Networkmanager was trying to do, leaving it in a confused state. Any thoughts? mark

4 8

Re: [CentOS] wifi on servers and fedora [was Re: 7.2 kernel panic on boot]
by James B. Byrne 11 Dec '15

11 Dec '15

On Tue, December 8, 2015 11:05, Matthew Miller wrote: > >> I have been bitten by things done in Fedora that only have any use >> on >> a laptop and that should never have been allowed into a server >> distribution. But I cannot see how I would have been aware of them >> until they manifested themselves on equipment under my care. By >> which > > ^ right, this. > >> time it is rather too late to influence the decision to include >> them. > > Well, not if you get involved early. That's the point. > > If you don't *want* to, that's fine, but there's only so much > complainy cake that you can have and eat at the same time. > So, the implication of your suggestion, if I understand it aright, is that I should audit all of the communication forums in use by Fedora developers and then point out whenever any of the many dozens or hundreds of contributors introduces something that in my opinion may impact a server installation. To do this I am required to obtain such intimate personal knowledge of the internal workings of the distribution as to be able to identify these items as soon as they are introduced. naturally, I am also supposed to be able to immediately identify the negative impact of these things and prepare and present a cogent argument against their adoption or propose patches to correct the deficiencies that I believe that I have detected. I am to do this whilst running a CentOS installation that will not allow Fedora onto the premises. SO, no doubt, the intent is that I should run Fedora on my home systems and work diligently in my off hours to protect any future version of CentOS from that vantage. And of course, if I miss something then it is my fault for not having paid enough attention to that item. Am I correct? -- *** e-Mail is NOT a SECURE channel *** Do NOT transmit sensitive data via e-Mail James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

13 29

Re: [CentOS] wifi on servers and fedora [was Re: 7.2 kernel panic on boot]
by James B. Byrne 11 Dec '15

11 Dec '15

On Wed, December 9, 2015 16:50, James Hogarth wrote: > On 9 Dec 2015 9:07 p.m., "Lamar Owen" <lowen(a)pari.edu> wrote: >> > >> No, it seems to me that a suitably motivated CentOS user needs to >> scratch this itch; and, no, I am not volunteering, as I've >> followed Fedora before......and just simply cannot give the >> time to it at this point in time in my life. >> > > <snip> > >> >> So who wants to be the CentOS-Users to Fedora liaison, likely to be >> one of the most thankless jobs on the planet? >> >> > > I'm an active Fedora packager and yet I dare say Mark would hate me as > liaison for I find the changes in EL7 most refreshing and look forward > to bring able to make better use of them in due course ;) > > But I really do question whether someone in this industry is really > not able to spend 30 minutes or so every six months checking changes > for anything interesting. > > And frankly if one isn't willing to get either get a subscription and > feedback as a paying customer or to get involved with the upstream > sources then no one does not have say in direction and one shouldn't > be surprised by that. > > If it was a democracy with a vote on every possible choice then we'd > never get anywhere given the time to carry out such a survey and the > vast differences in opinions. > > No, as the Debian folks say it is a meritocracy instead and those > who get stuck in and actively discuss at the right time provide > the influence on what happens next. > Since the import of what I was trying to convey has been lost, no doubt due to my poor choice of words, I will restate the obvious: If the bulk of the developers working on Fedora use laptops as their platform then, inevitably, Fedora will become in essence a laptop distribution and RHEL will follow. Talking about the server community monitoring the Fedora development channel once every six months, or every day for that matter, is simply not going to change this. A handful of voices representing server installations, who by definition are not development types, has no hope of dealing with the incremental changes introduced every day by hundreds of people that use laptops as their primary development platform and all of whom have their own 'itch' to scratch. That is just the way it is in open source. The choice to go to Fedora for RHEL development was a commitment to the laptop environment, whether consciously made or not. And it is not in the control of RH to dictate this. If the Fedora developers take up tablets en masse then guess what?: We will end up with a tablet distribution. The OS distro we get is the consequence of the culture and environment predominant in the development community. This is neither good nor bad. It just is. Our firm has specific requirements which to date have been more than adequately met by RHEL and CentOS. But that seems to us to be changing in ways that no longer meet our expectations from a server based distro. A server based distro to us has certain characteristics that are orientated to long running processes and system uptimes measured in months if not years. I have given up counting how many times I have to reboot all of our CentOS servers in the past year because of updates. On the other hand I have this task running on a different server with a different OS: Priority = DS; Inpri = 8; Time = UNLIMITED seconds. Job number = #j3719. TUE, NOV 4, 2014, 2:04 PM. We do not need plug-and-play; or usb hot-swapping; or hibernation; or screen savers; or audio-video players; or power optimisation. All of which are worthy things in their own right and certainly have their place in computing. While these occasionally have proved convenient for me none are really necessary for a server host and their presence undoubtedly significantly increases the complexity and maintenance burden of the distribution. What we need is simplicity, stability, reliability, and consistency. What seems to be happening instead is feature-creep, software-bloat and increased coupling. And lest I be accused of 'wingeing' from the sideline I have been contributing to Open Source in a modest way since 1995, starting with Sendmail-8.7 on HP-UX. I just have limited time to give over to these things. The selection of RHEL for our primary platform was, in large part, to reduce the resources given over to managing the software. It would be ironic in the extreme were the reverse prove the case. -- *** e-Mail is NOT a SECURE channel *** Do NOT transmit sensitive data via e-Mail James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

5 6

no longer goes to standby when lid is closed
by Fred Smith 11 Dec '15

11 Dec '15

since I got the big bolus of updates from the CR repo a few days ago my netbook (AcerAspire One D255E) will no longer go to standby when the lid is closed. This was a Gnome desktopp installation with theh MATE desktop fromm EPEL. I've verified that the correct setting still exists in power manager but it persists in continuing to run when the lid closes. it WILL go to standby if explicitly told to do so from the shutdown dialog. Has anyone else seen anything like this? TIA Fred -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ----------------------------- "For him who is able to keep you from falling and to present you before his glorious presence without fault and with great joy--to the only God our Savior be glory, majesty, power and authority, through Jesus Christ our Lord, before all ages, now and forevermore! Amen." ----------------------------- Jude 1:24,25 (niv) -----------------------------

3 6

when RedHat makes patches for only some versions
by Noam Bernstein 11 Dec '15

11 Dec '15

I guess this is really a RedHat, not CentOS question, but I’m hoping that someone here will be familiar enough with the upstream policy to have some useful information. How does RedHat decide which versions to release patches for, e.g. https://access.redhat.com/security/cve/CVE-2015-7613 <https://access.redhat.com/security/cve/CVE-2015-7613> which has only a RH7 erratum, not 6? And are they likely to eventually release a fix for this type of issue for RH6? thanks, Noam ----------------------------------------------------------- Noam Bernstein Center for Materials Physics and Technology Naval Research Laboratory Code 6390 noam.bernstein(a)nrl.navy.mil phone: 202 404 8628

4 4

VNC on centOS
by Hersh 11 Dec '15

11 Dec '15

Hi, I have recently installed centOS 7 and trying to start vnc server on it. Somehow, I am unable to make vncserver working. I have modified iptable rules and xstartup file but it did not help. Has anyone else faced this problem earlier? Any help would be appreciated. Regards Hersh

5 7

USB devices - libgphoto2 - PTP - hplip
by Michael H 10 Dec '15

10 Dec '15

Hi, Posting this again as it has been drowned. can anybody assist? ------------------------------------------------------------------ Hi All, I'm trying to disable USB storage devices in Centos7.1.1503. I've setup udev rules to block all usb devices and then additional rules to allow specific vendors / products to be used (mainly keyboards and mice). This is all working perfectly. cat /etc/udev/rules.d/01-usblockdown.rules # Block all USB devices ACTION=="add", SUBSYSTEMS=="usb", RUN+="/bin/sh -c 'for host in /sys/bus/usb/devices/usb*; do echo 0 > $host/authorized_default; done'" # Allow devices # Keyboards ACTION=="add", ATTR{idVendor}=="04f3", ATTR{idProduct}=="0103" RUN+="/bin/sh -c 'echo 1 >/sys$DEVPATH/authorized'" ...... Now I'm testing against mobile devices and when I connect an Asus mobile telephone it's mounting the camera using PTP even though the device is not allowed in my udev rules. I removed libgphoto2 which has now stopped the PTP from automounting. My issue is that I require hplip on my systems for certain printer drivers and this package was removed along with libgphoto2. I added an 'exclude=libgphoto2*' to my /etc/yum.repos.d/CentOS-Base.repo and installing hplip now fails on dependencies. Is there a method of disable libgphoto2 PTP without having to remove the package? or can I create further udev rules to stop PTP mounts? thanks in advance, Michael

4 8

CentOS-announce Digest, Vol 130, Issue 3
by centos-announce-request＠centos.org 10 Dec '15

10 Dec '15

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2015:2594 Moderate CentOS 6 libpng Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 9 Dec 2015 14:47:29 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2015:2594 Moderate CentOS 6 libpng Security Update Message-ID: <20151209144729.GA33887(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2015:2594 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2015-2594.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: e4b2fabf9c232b1a84e677df640aceab8b089e72781bec4fcca347d984e581d1 libpng-1.2.49-2.el6_7.i686.rpm c3b0f3d20047a8cef357a96171787aaffcf74ae93bb0b0faff1bca3001315586 libpng-devel-1.2.49-2.el6_7.i686.rpm c37977232c45d61ad118af010e21d611c4e98403b87ffd76bc645474c8754a2e libpng-static-1.2.49-2.el6_7.i686.rpm x86_64: e4b2fabf9c232b1a84e677df640aceab8b089e72781bec4fcca347d984e581d1 libpng-1.2.49-2.el6_7.i686.rpm 0f18ee677b60fe81a24f200cc8db1c9bde26a404cc812e77a73b2bcfd4dd40de libpng-1.2.49-2.el6_7.x86_64.rpm c3b0f3d20047a8cef357a96171787aaffcf74ae93bb0b0faff1bca3001315586 libpng-devel-1.2.49-2.el6_7.i686.rpm 6e30263282f29b65af97733f7704647e615ff857902ebf87927ba276a5230e3a libpng-devel-1.2.49-2.el6_7.x86_64.rpm 8d2cc2d3ed0e4c3d794c847f79d98b63caae912e869ff2f6ada349b1c3c2772e libpng-static-1.2.49-2.el6_7.x86_64.rpm Source: e756441baabe4038f09eb9dbe4207e83d347f21cbe805eb4956c2cd961a891db libpng-1.2.49-2.el6_7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 130, Issue 3 ***********************************************

1 0

CentOS 6, bareos, kerberos?
by m.roth＠5-cent.us 09 Dec '15

09 Dec '15

After upgradeding to bareos 15.2, which also has a web ui, thereby making it usable (since the command line tool, bconsole, does not have a paging mechanism, and its sytax for choosing files to restore is, let us say, arcane), I've got another question: is *anyone* using bareos with kerberos? I see that they have in alpha(?) tls support, which isn't a great idea, given the recent vulnerabilities.... If you've figured out how to use kerberos, rather than hard-coding a password in the console configuration, I'd love to hear it. mark

2 2

Re: [CentOS] wifi on servers and fedora [was Re: 7.2 kernel panic on boot]
by James B. Byrne 09 Dec '15

09 Dec '15

On Mon, December 7, 2015 13:41, Matthew Miller wrote: > On Fri, Dec 04, 2015 at 09:03:50AM -0500, James B. Byrne wrote: >> On Thu, Dec 03, 2015 at 02:50:38PM -0500, m.roth(a)5-cent.us wrote: >> > For laptops, great. For anything else, not so much. For example, >> > it's supposed to be an *ENTERPRISE* o/s... why does it >> > automatically, without ever asking, install anything wifi? I'm > [...] >> The short answer: Because RHEL is based on Fedora development. > > > This is roughly true, although "downstream" RHEL makes its own > decisions about many things. If you (Mark, or anyone else) would like > to make this different in the future, getting involved with Fedora > Server is a good way to do so. > I subscribe to the Fedora Server list digest. Which form also is how I get this list's messages. Thus the delay in my responses. However, to describe the Server List as an active forum for discussion would be somewhat overstating things. I have not received anything from it as yet in December and the total volume of traffic on that list in November was very light. I am not sure in what way you envisage additional involvement is to take place. I have been bitten by things done in Fedora that only have any use on a laptop and that should never have been allowed into a server distribution. But I cannot see how I would have been aware of them until they manifested themselves on equipment under my care. By which time it is rather too late to influence the decision to include them. Automatically powering down NICs comes to my mind; due the rather nasty consequences that resulted. The difficulty is that with Free and Open Source Software you are only going to see features that are of some immediate use to the writers; or whose value has already been entrenched such that it is difficult if not impossible to dispense with. Clearly, power saving features are of some interest to people that run their systems on batteries. However, there are batteries, and then there are batteries. We occasionally run run on batteries too. It is just that ours are measured in kilovolt-amp hours. Having a server distro configured by default to turn off a NIC because it has not had traffic for fifteen minutes is not going to save us enough power from now to the end of eternity to warrant the disruption that little 'feature' cost us when it was first encountered. The move to Systemd, and all the controversy that decision has generated, also provides 'features' whose benefits appear to me be be aimed principally at users who shut their systems off every day. These benefits are of far less value to people who measure uptime in months or years, while the discomfort, and expense, of this change must be borne regardless. Systemd will eventually be accepted or rejected on its own merits. I am not interested in debating them here since I have nothing upon which to base an opinion one way or the other. But it can hardly be denied that forcing highly qualified people to expend time, a very limited resource in my experience, to learn yet another way to start a computer system, without providing any readily discernible benefit to them, is not likely to engender much in the way of sympathy. We went to RedHat and ended up on CentOS because of its server orientation. Which to us implied something more than simple compatibility of the software components. If RedHats's intent is to end up as a laptop distro then we will probably part ways at some point. We have a laptop distro that works well for us. It is called OSX. And the hardware is pretty good too. -- *** e-Mail is NOT a SECURE channel *** Do NOT transmit sensitive data via e-Mail James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

3 2

USB devices - libgphoto2 - PTP - hplip
by Michael H 09 Dec '15

09 Dec '15

Hi All, I'm trying to disable USB storage devices in Centos7.1.1503. I've setup udev rules to block all usb devices and then additional rules to allow specific vendors / products to be used (mainly keyboards and mice). This is all working perfectly. cat /etc/udev/rules.d/01-usblockdown.rules # Block all USB devices ACTION=="add", SUBSYSTEMS=="usb", RUN+="/bin/sh -c 'for host in /sys/bus/usb/devices/usb*; do echo 0 > $host/authorized_default; done'" # Allow devices # Keyboards ACTION=="add", ATTR{idVendor}=="04f3", ATTR{idProduct}=="0103" RUN+="/bin/sh -c 'echo 1 >/sys$DEVPATH/authorized'" ...... Now I'm testing against mobile devices and when I connect an Asus mobile telephone it's mounting the camera using PTP even though the device is not allowed in my udev rules. I removed libgphoto2 which has now stopped the PTP from automounting. My issue is that I require hplip on my systems for certain printer drivers and this package was removed along with libgphoto2. I added an 'exclude=libgphoto2*' to my /etc/yum.repos.d/CentOS-Base.repo and installing hplip now fails on dependencies. Is there a method of disable libgphoto2 PTP without having to remove the package? or can I create further udev rules to stop PTP mounts? thanks in advance, Michael

1 0

CentOS 6 pci audio card not enabled
by clark＠west.net 08 Dec '15

08 Dec '15

CentOS 6 up-to-date 2.6.32-573.8.1.el6.x86_64 Gigabyte GA-Z68P-DS3 on-board audio BIOS disabled. Intel I5 Pny 550Ti video Envy 24HT pci audio module I want to use the fiber in/out of the audio card, but it is not listed in System/Preferences/Sound/Hardware, only the HDMI is available. It was installed in the pci slot when the system CentOS 6.0 was installed. I have searched all over Google, but can't find a solution. Does anyone have a solution for this problem ? Advice will be appreciated. thanks in advance! [mumbles@120db ~]$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 [mumbles@120db ~]$ lspci | grep -i audio 01:00.1 Audio device: NVIDIA Corporation GF116 High Definition Audio Controller (rev a1) 05:00.0 Multimedia audio controller: VIA Technologies Inc. VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio Controller (rev 01) [mumbles@120db ~]$ lspci -k <snip> <snip> 01:00.1 Audio device: NVIDIA Corporation GF116 High Definition Audio Controller (rev a1) Subsystem: Device 196e:089c Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel <snip> <snip> 05:00.0 Multimedia audio controller: VIA Technologies Inc. VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio Controller (rev 01) Subsystem: VIA Technologies Inc. Albatron PX865PE 7.1 Kernel modules: snd-ice1724 [mumbles@120db ~]$ lspci -n | grep 05:00.0 05:00.0 0401: 1412:1724 (rev 01) [mumbles@120db ~]$ grep 1724 /lib/modules/$(uname -r)/modules.pcimap snd-ice1724 0x00001412 0x00001724 0xffffffff 0xffffffff 0x00000000 0x00000000 0x0 [mumbles@120db ~]$ modinfo snd-ice1724 filename: /lib/modules/2.6.32-573.8.1.el6.x86_64/kernel/sound/pci/ice1712/snd-ice1724.ko license: GPL description: VIA ICEnsemble ICE1724/1720 (Envy24HT/PT) author: Jaroslav Kysela <perex(a)perex.cz> srcversion: 4159E44B9111EFB98548209 alias: pci:v00001412d00001724sv*sd*bc*sc*i* depends: snd,snd-ac97-codec,snd-pcm,snd-i2c,snd-ice17xx-ak4xxx,snd-rawmidi,snd-pt2258,snd-ak4xxx-adda,snd-ak4114 vermagic: 2.6.32-573.8.1.el6.x86_64 SMP mod_unload modversions parm: index:Index value for ICE1724 soundcard. (array of int) parm: id:ID string for ICE1724 soundcard. (array of charp) parm: enable:Enable ICE1724 soundcard. (array of bool) parm: model:Use the given board model. (array of charp)

1 0

openvpn + routing
by Axel Glienke 08 Dec '15

08 Dec '15

Hello, i have a little question. My system: ip route: 0.0.0.0/1 via 10.8.0.5 dev tun0 default via 192.168.2.1 dev br0 proto static metric 425 10.8.0.1 via 10.8.0.5 dev tun0 10.8.0.5 dev tun0 proto kernel scope link src 10.8.0.6 88.198.140.127 via 192.168.2.1 dev br0 192.168.2.0/24 dev br0 proto kernel scope link src 192.168.2.101 metric 425 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 traceroute gmx.de traceroute to gmx.de (213.165.65.60), 30 hops max, 60 byte packets 1 Speedport.ip (192.168.2.1) 0.578 ms 0.662 ms 0.859 ms ^C [root@h1 ~]# traceroute spiegel.de traceroute to spiegel.de (62.138.116.3), 30 hops max, 60 byte packets 1 10.8.0.1 (10.8.0.1) 35.009 ms 34.982 ms 34.956 ms Why the routing is different, in first case over br0 in second over the vpn device? How can i disable "push default route" from the server-directive on client-side in OpenVPN? I want, that only traffic, incoming over tun0 routing back over tun0. Is this possible with firewalld-cmd? Thx. Grüße Axel

5 5

yum errors
by Wes James 08 Dec '15

08 Dec '15

I have inherited centos 6.3 and 6.2 vms in an esxi environment. When I do yum provides ntpd on the 6.3 box I get a lot of errors like: Loaded plugins: fastestmirror, presto Loading mirror speeds from cached hostfile * base: mirror.unl.edu * extras: mirrors.cmich.edu * updates: mirror.steadfast.net http://mirror.unl.edu/centos/6.4/os/x86_64/repodata/repomd.xml: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404" Trying other mirror. http://mirror.ash.fastserv.com/pub/linux/centos/6.4/os/x86_64/repodata/repo…: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404" Trying other mirror. http://mirrors.einstein.yu.edu/centos/6.4/updates/x86_64/repodata/repomd.xml: [Errno 12] Timeout on http://mirrors.einstein.yu.edu/centos/6.4/updates/x86_64/repodata/repomd.xml: (28, 'connect() timed out!') Trying other mirror. http://mirrors.versaweb.com/centos/6.4/updates/x86_64/repodata/repomd.xml: [Errno 12] Timeout on http://mirrors.versaweb.com/centos/6.4/updates/x86_64/repodata/repomd.xml: (28, 'connect() timed out!') Trying other mirror. Why am I getting these errors? I installed 6.4 in virtualbox and the .repo files seem the same, except the 6.3 box didn’t have a fastback.repo file. Also why is it looking at 6.4 repos above? When I see: cat /etc/redhat-release CentOS release 6.3 (Final) i.e., this box is 6.3. Shouldn’t it be looking for 6.3 repo info? Thanks, -wes

8 24

Version numbering vis a vis CentOS and RHEL
by Phelps, Matthew 08 Dec '15

08 Dec '15

OK, I'm staring a new thread. On Mon, Dec 7, 2015 at 9:53 AM, Timothy Murphy <gayleard(a)eircom.net> wrote: > Phelps, Matthew wrote: > > >> > Oh, wait: CentOS, love it or leave it. > >> > >> Correct. > >> > >> In fact, I would prefer you leave. > > > > Really? > > > > This is what we're dealing with now? > > > > OK. I will recommend we move away from CentOS. > > This seems to be raising what to me is a trivial issue > to an absurd level of hostility. > Johnny Hughes' comment was uncharacteristically harsh; > and yours is even harsher. > > To me, CentOS is a highly stable OS for my home servers, > and I am eternally grateful to Johnny Hughes and his colleagues > for carrying out what looks to me like an impossibly complex task. > > The numbering of packages is a very small part of this. > On the other hand, a kernel panic would be very worrying to me > if it were in fact likely to happen. > I am glad to hear that I have no need to worry. > To you, and probably a majority of CentOS users, the "version number" of CentOS is indeed a trivial, cosmetic issue. However, there are those of us who use CentOS in a very large enterprise environment. That is, in fact, the intended audience of the whole distro. When there is a "new version" of Red Hat (and I know that means nothing with hundreds of constantly updating packages; however, my bosses don't get that), and hence CentOS, there is a huge amount of work that needs to be done in a typical enterprise. These include, but are not limited to: - setting up a new internal-only mirror of the distribution - setting up a new tftp/PXEboot/kickstart environment for network installs. - Editing several install scripts to match the new environment - Testing all these changes - Checking that all security recommendations/edicts from a higher authority (e.g. the US Government), which are also based on the "version", are followed - Checking that all commercial software supports the release (most of these use "RHEL X.y", what is that in CentOS now?) - Trying to get support from commercial software when the "version numbers" don't match - Coordination of other repositories (e.g. EPEL) is based on the "version", how does that work now? All of these things ran in parallel with the RHEL release cycle, and the work could be done at the same time. That was the overriding philosophy of CentOS, "we are a recompile of RHEL." Now, the impression is (rightly or wrongly, it doesn't matter to me) CentOS is totally becoming a separate Linux distro, and needs to be treated as such. And that has huge implications for system administrators in a large environment. Huge. There are answers to all these questions, but there is a lot of confusion that's been generated by this seemingly cosmetic change in version numbers. I've checked, and there was no,"We're considering creating this basic difference from RHEL, how will this affect you?" on this list, or the website, etc. From our viewpoint, it was sprung on us out of nowhere, and now were being told "deal with it, or leave." It sucks. -- Matt Phelps System Administrator, Computation Facility Harvard - Smithsonian Center for Astrophysics mphelps(a)cfa.harvard.edu, http://www.cfa.harvard.edu

10 15

CentOS-announce Digest, Vol 130, Issue 2
by centos-announce-request＠centos.org 08 Dec '15

08 Dec '15

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2015:2549 Moderate CentOS 6 libxml2 Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 7 Dec 2015 13:26:33 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2015:2549 Moderate CentOS 6 libxml2 Security Update Message-ID: <20151207132633.GA36846(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2015:2549 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2015-2549.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: ef6fc5b110883e8b85e6e0aadb0dece190506569ba1c25247b612ffee5e10e7c libxml2-2.7.6-20.el6_7.1.i686.rpm 02e4ba1fea746762064a0fc7ba37d9fa1626cefd43257360db633fb23007c1d7 libxml2-devel-2.7.6-20.el6_7.1.i686.rpm d45068dcb62936bfd95e45182c807339dc060963d97adeae4d7717943a0107df libxml2-python-2.7.6-20.el6_7.1.i686.rpm 3c14ee97b4f56ede803f59fcdadb4786e3e4ab6792d68e7b509e7a346973b363 libxml2-static-2.7.6-20.el6_7.1.i686.rpm x86_64: ef6fc5b110883e8b85e6e0aadb0dece190506569ba1c25247b612ffee5e10e7c libxml2-2.7.6-20.el6_7.1.i686.rpm 6c42e07b5804dc8c346d5fa29755a515e8338618fc2b228959e4449e0d7b3227 libxml2-2.7.6-20.el6_7.1.x86_64.rpm 02e4ba1fea746762064a0fc7ba37d9fa1626cefd43257360db633fb23007c1d7 libxml2-devel-2.7.6-20.el6_7.1.i686.rpm 46fa4d9f942837bb4dc48907578ed4e12ca6a830b61719c649ff2b7ac5292bbf libxml2-devel-2.7.6-20.el6_7.1.x86_64.rpm 248032ec39a9aa0964763fa824604bc696dc54b59adaaac6b9e7c54f76137518 libxml2-python-2.7.6-20.el6_7.1.x86_64.rpm 67315973b872c5fdfc8656df43af9d21bd9a881e4c20d1bff3f53db1def4022b libxml2-static-2.7.6-20.el6_7.1.x86_64.rpm Source: 647b02b23b0fc8a0cb8d0821279cb4600f130b3776e345e91dee342f8dfbbbb4 libxml2-2.7.6-20.el6_7.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 130, Issue 2 ***********************************************

1 0

7.2 kernel panic on boot
by Duncan Brown 07 Dec '15

07 Dec '15

Hi All After upgrading to 7.2, I'm getting an immediate kernel panic on boot Dropping back to 3.10.0-229.20.1.el7.x86_64 and the system boots fine How can I go about diagnosing the problem here? thanks Duncan

23 91

A bareos question
by m.roth＠5-cent.us 07 Dec '15

07 Dec '15

I've upgraded to 15.2, which has a webui. However, I'd like to tell it to use kerboros, not a hard-coded password in a configuration file. Any clues? mark

1 0

Using typescript as a default shell?
by Benjamin Smith 07 Dec '15

07 Dec '15

Is it possible to use 'script' command that records what happens in a session as the default shell? How could you deal with multiple logins at once? What about output from rsync and the like?

4 4

Centos 7 Yum conflict libicalss
by david 07 Dec '15

07 Dec '15

Folks My Centos 7 systems are all failing to update because of Error: Package: orage-4.10.0-4.el7.x86_64 (@epel) Requires: libicalss.so.0()(64bit) Removing: libical-0.48-6.el7.x86_64 (@base) libicalss.so.0()(64bit) Updated By: libical-1.0.1-1.el7.x86_64 (cr) ~libicalss.so.1()(64bit) Error: Package: orage-4.10.0-4.el7.x86_64 (@epel) Requires: libicalvcal.so.0()(64bit) Removing: libical-0.48-6.el7.x86_64 (@base) libicalvcal.so.0()(64bit) Updated By: libical-1.0.1-1.el7.x86_64 (cr) ~libicalvcal.so.1()(64bit) Error: Package: orage-4.10.0-4.el7.x86_64 (@epel) Requires: libical.so.0()(64bit) Removing: libical-0.48-6.el7.x86_64 (@base) libical.so.0()(64bit) Updated By: libical-1.0.1-1.el7.x86_64 (cr) ~libical.so.1()(64bit) You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest Is there something I should (not) be doing? The command was: yum update David

5 5

About CentOS Marks
by Takuya Yamamoto 07 Dec '15

07 Dec '15

Hello https://www.centos.org/legal/trademarks/ According to above, I found following message. ---------------------- Notwithstanding anything to the contrary provided in these Guidelines, the following are examples of unacceptable uses: 1.Use of the CentOS Marks in connection with commercial redistribution of CentOS software ---------------------- I have a question. What means "Use of the CentOS Marks"? For example, While CentOS is booting up, CentOS show the CentOS logo on Full screen. Is it unacceptable? Or acceptable? If commercial redistribution of CentOS software, Developer have to hide this logo? For example, CentOS System is working, user can show the "CentOS" text words on console. Is it unacceptable? Or acceptable? br ----------------------- Yamamoto Takuya

2 1

Centos-7: odd yum output
by Fred Smith 07 Dec '15

07 Dec '15

Hi all! On 7.1 + CR updates, running "yum list installed | grep -y totem" gives this: yum list installed | grep -y totem totem.x86_64 1:3.14.3-5.el7 @cr totem-nautilus.x86_64 1:3.14.3-5.el7 @cr totem-pl-parser.x86_64 3.10.5-1.el7 @cr and "yum list installed | grep -y totem" gives this: yum list available | grep -y totem gnome-python2-totem.x86_64 2.32.0-20.el7.nux nux-dextop totem-devel.x86_64 1:3.14.3-5.el7 cr totem-mozplugin.x86_64 1:3.8.2-5.el7 base totem-mozplugin-vegas.x86_64 1:3.8.2-5.el7 base totem-pl-parser.i686 3.10.5-1.el7 cr totem-pl-parser-devel.i686 3.10.5-1.el7 cr totem-pl-parser-devel.x86_64 3.10.5-1.el7 cr so then, why is it that "yum install totem-mozplugin" gives this? yum install totem-mozplugin Loaded plugins: fastestmirror, langpacks, nvidia Loading mirror speeds from cached hostfile * base: mirrors.lga7.us.voxel.net * elrepo: iad.mirror.rackspace.com * epel: mirrors.mit.edu * extras: mirror.ash.fastserv.com * nux-dextop: mirror.li.nux.ro * updates: centos.chi.host-engine.com Package 1:totem-mozplugin-3.8.2-5.el7.x86_64 is obsoleted by 1:totem-3.14.3-5.el7.x86_64 which is already installed Nothing to do I don't understand, UNLESS it's saying that the totem package now includes the plugin? OK, I can understand that. But looking at the contents of the RPM, it seems to contain only plugins for itself. I'm just upgrading to 7.x, now, and the 6.x box previously had several plugins installed that I can't find, nor even remember where I found 'em. (probably has to do with my age... :[ ) Advice will be appreciated. thanks in advance! Fred -- ------------------------------------------------------------------------------ Under no circumstances will I ever purchase anything offered to me as the result of an unsolicited e-mail message. Nor will I forward chain letters, petitions, mass mailings, or virus warnings to large numbers of others. This is my contribution to the survival of the online community. --Roger Ebert, December, 1996 ----------------------------- The Boulder Pledge -----------------------------

2 1

lunar notation in crontab
by ken 06 Dec '15

06 Dec '15

Crontab offers many refined facilities for Western calendaring, but none for traditional Eastern-- lunar-- designations. So for example, if one wants specify regular occurring events on full moons or on new moons, there is no way to do this. Emacs (a text processor!?) accomplishes this. The math for calculating lunar calendaring is already available; mathematical functions are already available for simple downloading and so would need simply integration into crond. User settings in crontab would make most sense designated in the 'day of month' field with keyword either 'full' or 'new' (abbreviated with 'f' or 'n') prepended to a signed integer number of days (N * 24 hours). I.e., "new+5" would specify '5 days after the new moon'; "full-1" would specify "24 hours prior to the full moon"; "new+0", "new-0" and "new" would all mean the same: "the moment of the new moon". I suppose that alternate syntaxes could be more refined, including hours and minutes before/after new/full, so possibly useful, but then also more complex. Alternate and more refined time periods would be a question for developers.

3 2

Firewalld zone conflict
by Colin Coles 04 Dec '15

04 Dec '15

Hi, In CentOS7 I have added two zones using firewall-cmd, each for different ports/services and interfaces when I try to --add-source to the second zone with an IP that is already in the first I am getting an 'Error: ZONE_CONFLICT' message. Am I trying to do something illogical or is this a feature? Cheers, Colin.

2 2

CentOS 7.2 - no GUI login after upgrade
by Earl A Ramirez 04 Dec '15

04 Dec '15

After installing and enabling the centos-release-cr repo on my CentOS 7.1 laptop; I ran yum clean all and yum update. Yum complained about gstreamer1 dependencies that is caused by epel repo; therefore, I excluded it from the epel repo and run yum update one more time and it went through. After the update was completed I rebooted the laptop and I will just get the splash screen but will never get to the actual login screen; I have experienced this in the past from CentOS 7.0 to 7.1 upgrade and at that time it was caused by SELinux relabeling some of the configuration files; e.g. /etc/passwd and /etc/shadow. This was discovered after I went into single user mode and checked the journal. I booted in the previous successful kernel that loaded and I experienced the same behavior; therefore I went into single user mode from the latest kernel that came with CentOS 7.2 and the previous kernel, checked the journal and there were no errors that give me a hint of what is going wrong. There are no SELinux relabeling but I left the laptop on for a few hours because I was modifying a few directories to accommodate docker and KVM storage from the default setup. Any pointers on how to get the login screen? Thanks in advance. -- Kind Regards Earl Ramirez

4 3

diagnosing noise
by Michael Hennebry 03 Dec '15

03 Dec '15

Though quiet at the moment, my desktop sometimes sometimes makes a noise that I attribute to either a disk or a fan on its last legs. I'm looking for suggestions for distinguishing. For the disk, I expect I should use either hdparm of fsck. Even after reading the man page, I'm not sure how I would use hdparm. If I use fsck, what should I take as evidence of a bad drive? A good drive? Is there a way to tell whether the OS thinks a fan is on? Is there a way to turn a fan on or off manually? Time for a backup. -- Michael hennebry(a)web.cs.ndsu.NoDak.edu "Sorry but your password must contain an uppercase letter, a number, a haiku, a gang sign, a heiroglyph, and the blood of a virgin." -- someeecards

4 3

Re: [CentOS] 7.2 kernel panic on boot
by m.roth＠5-cent.us 03 Dec '15

03 Dec '15

Duncan Brown wrote: > On 03/12/2015 17:00, m.roth(a)5-cent.us wrote: >> Duncan Brown wrote: >>> On 03/12/2015 14:29, Leon Fauster wrote: >>>> Am 03.12.2015 um 15:06 schrieb Duncan Brown <centos2(a)duncb.co.uk>: >>>>> On 03/12/2015 13:54, Jonathan Billings wrote: >>>>>> On Thu, Dec 03, 2015 at 01:44:47PM +0000, Duncan Brown wrote: >>>>>>> The last message before it is "switching to clocksource hpet" >>>>>>> >>>>>>> Then the panic scrolls by >>>>>>> >>>>>>> I've no idea if that counts as later or not >>>>>> It's unlikely to be a panic related to your hardware clock (HPET = High Precision Event Timer), so it's probably when the kernel is touching something else on your system. >>>>>> >>>>>> The content of the panic is really the only thing that can help. >>>>>> >>>>> That's what I figured, but how do I go about getting a copy of it? >>>>> >>>>> Most of it has scrolled by when it's finished >>>> start for example with a photo (or video and grab the frame where the panic occurs) and - disable grub options like rhgb or quit ... >>> Here is a couple of pictures, >> ^^ should be are.* >>> http://i.imgur.com/Vqvqn1H.jpg >>> http://i.imgur.com/WQaz1j9.png >>> >>> Any use? >> I'm just guessing here, but it looks to me as though it's looking at inodes - so filesystem, and kernel modules, maybe video - notice the blacklist. >> >> Wonder if this is a grub2 issue, and it's not finding the filesystem. This isn't, by chance, a secure boot, not BIOS, system? >> > No nothing that exciting, BIOS, and xfs on lvm2. Pretty much the standard options anaconda gives you > > And it boots fine in 3.10.0-229.20.1.el7.x86_64 A thought: did you say you'd rebuilt the ramfs, making sure both xfs and lvm drivers were included? mark

3 2

CR getting 7.2 packages......
by Lamar Owen 03 Dec '15

03 Dec '15

Heads-up to everyone: CR is getting CentOS 7.1511 (aka '7.2') packages..... just updated using CR, and, yeah, GNOME 3.14 is a bit different from 3.8...... several things are in different places on the screen. I did have to re-setup my triple monitor settings to have the laptop's display in the center and the two other displays as one on the left and one on the right. The good side is that nothing major seems to have broken. Update for me was 1,260+ packages totaling about 1.3GB and taking a grand total of about 25 minutes, start to finish (prior to the reboot). Hardware is a Dell Precision M6500 Core i7 740QM with 20GB of RAM, all but /home on a 256GB SSD with /home on an HGST 1TB HDD. Kudos to the build team for the quick turnaround, and for the CR repo.

5 5

Fwd: Re: New Monitor Weirdnesses or how do I get Xorg to pay attention to my xorg.conf file?
by Robert Heller 03 Dec '15

03 Dec '15

Has anyone built the nouveau drivers for CentOS 5 system running under Xen? Forwarded Message: From: =?iso-8859-1?Q?Thomas_L=FCbking?= <thomas.luebking(a)gmail.com> To: <xorg(a)lists.x.org> Subject: Re: New Monitor Weirdnesses or how do I get Xorg to pay attention to =?iso-8859-1?Q?my_xorg.conf_file=3F?= Date: Thu, 03 Dec 2015 16:19:54 +0100 Message-ID: <f2d6eb09-0843-402f-bd3c-356af88de513(a)gmail.com> VESA defined modes are - 320×200 - 640×400 - 640×480 - 800×600 - 1024×768 - 1280×1024 No idea whether the vesa driver supports non-vesa modes, but did you try using nouveau instead of vesa? /var/log/Xorg.0.log will tell you the servers opinion on what you added to your config. Cheers, Thomas _______________________________________________ xorg(a)lists.x.org: X.Org support Archives: http://lists.freedesktop.org/archives/xorg Info: http://lists.x.org/mailman/listinfo/xorg Your subscription address: %(user_address)s -- Robert Heller -- 978-544-6933 Deepwoods Software -- Custom Software Services http://www.deepsoft.com/ -- Linux Administration Services heller(a)deepsoft.com -- Webhosting Services

1 0

CentOS-announce Digest, Vol 130, Issue 1
by centos-announce-request＠centos.org 03 Dec '15

03 Dec '15

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2015:2521 Important CentOS 6 jakarta-commons-collections Security Update (Johnny Hughes) 2. CESA-2015:2504 Moderate CentOS 6 libreport Security Update (Johnny Hughes) 3. CEBA-2015:2510 CentOS 6 environment-modules FASTTRACK BugFix Update (Johnny Hughes) 4. CEBA-2015:2511 CentOS 6 passwd FASTTRACK BugFix Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 2 Dec 2015 13:38:14 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2015:2521 Important CentOS 6 jakarta-commons-collections Security Update Message-ID: <20151202133814.GA31544(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2015:2521 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2015-2521.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: fb0d4030ce62da3195e8dbc0499c8a9dac2cf305d7360e7c26d4463460d8e9c8 jakarta-commons-collections-3.2.1-3.5.el6_7.noarch.rpm 6fb79e53a628993b4edfc8dd4aa798734d16bd5023b73a1920bc397eee8c930b jakarta-commons-collections-javadoc-3.2.1-3.5.el6_7.noarch.rpm 28379893b6c23425192454d698306f23912fac837526cb87bf5a7ebab0979c50 jakarta-commons-collections-testframework-3.2.1-3.5.el6_7.noarch.rpm 214411faa4b24c1f8ed7455d75bcf55261612a367f75670ef80df5dbbbbe2d2e jakarta-commons-collections-testframework-javadoc-3.2.1-3.5.el6_7.noarch.rpm c2341b79e8cfcb1332164d438812708e94889dae669c01f9e59bebae1294226d jakarta-commons-collections-tomcat5-3.2.1-3.5.el6_7.noarch.rpm x86_64: fb0d4030ce62da3195e8dbc0499c8a9dac2cf305d7360e7c26d4463460d8e9c8 jakarta-commons-collections-3.2.1-3.5.el6_7.noarch.rpm 6fb79e53a628993b4edfc8dd4aa798734d16bd5023b73a1920bc397eee8c930b jakarta-commons-collections-javadoc-3.2.1-3.5.el6_7.noarch.rpm 28379893b6c23425192454d698306f23912fac837526cb87bf5a7ebab0979c50 jakarta-commons-collections-testframework-3.2.1-3.5.el6_7.noarch.rpm 214411faa4b24c1f8ed7455d75bcf55261612a367f75670ef80df5dbbbbe2d2e jakarta-commons-collections-testframework-javadoc-3.2.1-3.5.el6_7.noarch.rpm c2341b79e8cfcb1332164d438812708e94889dae669c01f9e59bebae1294226d jakarta-commons-collections-tomcat5-3.2.1-3.5.el6_7.noarch.rpm Source: 8637ea23285015541b3c8f12e9012905f3406854f5578baf2fd130439b166560 jakarta-commons-collections-3.2.1-3.5.el6_7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Wed, 2 Dec 2015 13:52:30 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2015:2504 Moderate CentOS 6 libreport Security Update Message-ID: <20151202135230.GA32397(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2015:2504 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2015-2504.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 656487d74686645d976f44633dee7cbadc1fae5a6c2dd01ecfe5e393a860c4ad libreport-2.0.9-25.el6.centos.i686.rpm 8547d958f7ffefdd76cb36e193b68b523cc119a322de72dc4d010ceed0ce0b9c libreport-cli-2.0.9-25.el6.centos.i686.rpm 6105f4d8a44bdf1bf021f44312caf54f4bf2cec22c0e5b99ca9586385a979608 libreport-compat-2.0.9-25.el6.centos.i686.rpm 921ae3d09b58a3f86bfa95bbb79da12c6b36089e13c961cd32a48c908a08720b libreport-devel-2.0.9-25.el6.centos.i686.rpm 0950a92cf352527f06f86c3da9f5f6ccfc43d99ec51ef8f1e78753db789e4d16 libreport-filesystem-2.0.9-25.el6.centos.i686.rpm 2c8f5e795796c1d4761417fa6afb6c246ebedbbde15bec567ab995453caaa330 libreport-gtk-2.0.9-25.el6.centos.i686.rpm 86570e8bbe44018a737dc623caea66842d657254f6eab5440b5b230a5de671e1 libreport-gtk-devel-2.0.9-25.el6.centos.i686.rpm 01f554534b11515d8c8f407d5343f45cb4139a6ce94a1e5e7a9b8b040d8e5743 libreport-newt-2.0.9-25.el6.centos.i686.rpm 67252ae80031f32ff9e090e1f6d75eaf931cbd793ae0f8cc51d6820310476ecb libreport-plugin-bugzilla-2.0.9-25.el6.centos.i686.rpm e5bc4aad50856e70dd73c1ba10c21637248d6c231bc163190d5ca04245fb329e libreport-plugin-kerneloops-2.0.9-25.el6.centos.i686.rpm 7d0cffdd42a9cdb9251c7db43f6e819959d74d010e55b5cee22fef26df1c9302 libreport-plugin-logger-2.0.9-25.el6.centos.i686.rpm 2c0e805d6bd801b396ab87dde8d49fe0d19617a75377f0fac708209fb40cf0da libreport-plugin-mailx-2.0.9-25.el6.centos.i686.rpm 558c107bccfa46cdd9f2311074b9152493326d16a4401744751dc6782ff4180c libreport-plugin-reportuploader-2.0.9-25.el6.centos.i686.rpm 37b0bf0cbe56180b29a34c0e93fca3fea01dd9feace36eeb2bd77b8e168a2fb3 libreport-plugin-rhtsupport-2.0.9-25.el6.centos.i686.rpm 1bd8f673862301554dd01d48eb0396bb8e7d335bd7f9323d53a06ad11e139505 libreport-plugin-ureport-2.0.9-25.el6.centos.i686.rpm d0c56a772a92aa5e4602bc25a5f24387642e3fb0b97135062321cd165c4aeff6 libreport-python-2.0.9-25.el6.centos.i686.rpm x86_64: 656487d74686645d976f44633dee7cbadc1fae5a6c2dd01ecfe5e393a860c4ad libreport-2.0.9-25.el6.centos.i686.rpm 429819991b94f856dafed9405c3f58ea040b99566e8027578c3683cdacacaecb libreport-2.0.9-25.el6.centos.x86_64.rpm aa5e4a12076a7986ffb1e9ef5bf35c7bc469aba3c1032ac15effdb2f52f35564 libreport-cli-2.0.9-25.el6.centos.x86_64.rpm 244bc4f64c683f2387a74924f1f3f4edf34d923fcb03cb15578ba4be3b6147f1 libreport-compat-2.0.9-25.el6.centos.x86_64.rpm 921ae3d09b58a3f86bfa95bbb79da12c6b36089e13c961cd32a48c908a08720b libreport-devel-2.0.9-25.el6.centos.i686.rpm 996d750ee1aa597a69ac4b4fef1f5837ce7524c33129a4b37895fc8c0d8e86b6 libreport-devel-2.0.9-25.el6.centos.x86_64.rpm 0c32a03b087e95294406e38cf9f8aafb4deed6c9bc6ab8c5bf254350215e548a libreport-filesystem-2.0.9-25.el6.centos.x86_64.rpm 2c8f5e795796c1d4761417fa6afb6c246ebedbbde15bec567ab995453caaa330 libreport-gtk-2.0.9-25.el6.centos.i686.rpm daab600f0aa8c53e873b1b4078de62014ca0e2ee859cdb6b36c83caa9f9caea6 libreport-gtk-2.0.9-25.el6.centos.x86_64.rpm 86570e8bbe44018a737dc623caea66842d657254f6eab5440b5b230a5de671e1 libreport-gtk-devel-2.0.9-25.el6.centos.i686.rpm c218a6f402e882c30925449b6eb815f510b911d7f8473bb3be9cfd5e1fb90951 libreport-gtk-devel-2.0.9-25.el6.centos.x86_64.rpm 438430f2d9dcfa2673ba58e971f05f701eeec79a5528f68f63e186b126dfd93b libreport-newt-2.0.9-25.el6.centos.x86_64.rpm 6140c9131b01584323bae639f0e8d9ec112ceae68af65913d6763e58b495feaa libreport-plugin-bugzilla-2.0.9-25.el6.centos.x86_64.rpm 2d0644a2aa90a2fcad0fa1a6b71299f87da68bffc56085cfb27e9927338cb5b6 libreport-plugin-kerneloops-2.0.9-25.el6.centos.x86_64.rpm 1558a6e36b162b06d872095cd240e7fe79541d15e7d8aaa047c7b25c840e9b88 libreport-plugin-logger-2.0.9-25.el6.centos.x86_64.rpm 2f36f2d6fd5472b2dba219f59edb4ac3ee5fc98bc4a613a16dccd73038c95368 libreport-plugin-mailx-2.0.9-25.el6.centos.x86_64.rpm 7f67ed428139f6adaf8a96245e607f1c248c4d5f6464c8f85070fbe5b71738db libreport-plugin-reportuploader-2.0.9-25.el6.centos.x86_64.rpm 57f03c50a3ef0b23192cc59abdb4fe0799f8b6f8b803d8b717559b1f06e72034 libreport-plugin-rhtsupport-2.0.9-25.el6.centos.x86_64.rpm cdcd49774383cf21879c76f9bc24b7badc8672d5210eb66a31a0841287ccb590 libreport-plugin-ureport-2.0.9-25.el6.centos.x86_64.rpm 5a4c71eb3b48e08600e5f88a9a6e5604de7f13e59ed78da20ba61eeb3cea7cca libreport-python-2.0.9-25.el6.centos.x86_64.rpm Source: 361ba7c3774e45099a6d23aa720ea5ea3a985e03b3e0766ed0fb40276cb68975 libreport-2.0.9-25.el6.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 3 Date: Wed, 2 Dec 2015 14:03:22 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:2510 CentOS 6 environment-modules FASTTRACK BugFix Update Message-ID: <20151202140322.GA42985(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:2510 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-2510.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: bd06ac4a595aeb563b264c6b931745a7c4ed3b7c028c1b7a3f357c0f79d420ff environment-modules-3.2.10-3.el6.i686.rpm x86_64: 53c283fb6642081efe50b5672127c264d1eee696dadf4b413320eb021d4cf694 environment-modules-3.2.10-3.el6.x86_64.rpm Source: 840c8ffdcbddbd5f24f8b815973fbe7b0f17f1d07c56a688224e165ece8304d3 environment-modules-3.2.10-3.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 4 Date: Wed, 2 Dec 2015 14:03:38 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:2511 CentOS 6 passwd FASTTRACK BugFix Update Message-ID: <20151202140338.GA43073(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:2511 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-2511.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 6e739781cb42d40a379b7bac1d944f738c6dd1069b17752adb90338be81523b5 passwd-0.77-7.el6.i686.rpm x86_64: 98b6d3dd751b7c633f431bcedc85bdaa70c6a3fded5523bc509146a89b15e9d1 passwd-0.77-7.el6.x86_64.rpm Source: b1c817af58eabdd41efa66c7cd98ae9f14eaa367a5f9929a419cfe6bdab1e11c passwd-0.77-7.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 130, Issue 1 ***********************************************

1 0

lvm snapshot
by Axel Glienke 03 Dec '15

03 Dec '15

Hello after a lvm snapshot creation and a reboot are all logical volumes are missing, only swap is present. lvcreate -L 5000M -s -n centos_h1-root_snap /dev/mapper/centos_h1-root lvs LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert centos_h1-root_snap centos_h1 swi-a-s--- 4,88g root 0,00 home centos_h1 -wi-ao---- 15,00g root centos_h1 owi-aos--- 20,00g swap centos_h1 -wi-ao---- 7,62g var centos_h1 -wi-ao---- 1000,00g after reboot no complete start, dracut console is running: dracut:# ls /dev/centos_h1/ swap dmsetup info shows swap only, too I can reproduce this on 2 different Servers and a Virtual Machine have same behavior. What do i wrong? Greetings Axel

4 13

CentOS and bacula
by Alessandro Baggi 02 Dec '15

02 Dec '15

Hi list, I've a bacula system based on disk volume that I need to refresh (new install). There is a way to mantain the "current status" (volumes, catalog and other if needed) when migrating the system to a new installation? Thanks in advance

3 5

getting X started...
by Fred Smith 02 Dec '15

02 Dec '15

I've got a new VM installed for me by a sysadmin who apparently did a minmal install. As a result I've installed a bunch of things to try to get X going, including yum groupinstall "development and creative workstation", "Desktop platform" "mate desktop" but so far I've not found the incantation to get it to start up X at boot time. As far as I can tell, it doesn't even try. Once I log in, startx works fine. Can someone point me to whatever it is I'm missing here? thanks! -- ------------------------------------------------------------------------------- Under no circumstances will I ever purchase anything offered to me as the result of an unsolicited e-mail message. Nor will I forward chain letters, petitions, mass mailings, or virus warnings to large numbers of others. This is my contribution to the survival of the online community. --Roger Ebert, December, 1996 ----------------------------- The Boulder Pledge -----------------------------

4 5

New monitor weirdnesses (CentOS 5.11)
by Robert Heller 01 Dec '15

01 Dec '15

I just got a new monitor for my desktop system (the old one died after *many* years of service). The new monitor is a high res 16:9 monitor, but the VESA video driver insists on using 1024x768 (which was the resolution of the *old* monitor). It does seem to detect higher, 16:9 resolutions but it is not using them. I *think* I need to set some low-level video mode thing, but it has been a long time since I have had to do that that I have totally forgotten how to do it. And I have been unable to find it with a websearch either. >From /var/log/Xorg.0.log: (II) VESA(0): Printing DDC gathered Modelines: (II) VESA(0): Modeline "1366x768"x0.0 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz) (II) VESA(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz) (II) VESA(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) VESA(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) VESA(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) VESA(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) VESA(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) VESA(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) VESA(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) VESA(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) VESA(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) VESA(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) VESA(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) VESA(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) VESA(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) VESA(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz) (II) VESA(0): Searching for matching VESA mode(s): Any of 1360x768, 1366x768, or 1280x720 would be fine. Following this are a pile of blocks starting with 'Mode: ...' or '*Mode: ...'. I think these are the modes the driver is reading from some 'magic' place and maybe the stared ones are 'matches' to the DCC mode lines. I think what I need to do is update this 'magic' place with a low-level program (probably eventually run in /etc/rc.local or someplace like that) that will add in a 'Mode' -- I did this *years* ago with little machines with Intel video chips and 16:9 monitors. But I am totally blanking on the command to use. I find using a 4:3 video mode on a 16:9 monitor somewhat unusable. I running CentOS 5.11 w/Xen. The video chipset is a NVIDIA Corporation C77 [GeForce 8200] (rev a2). I am using stock CentOS 5 drivers and libraries (slightly out of date). -- Robert Heller -- 978-544-6933 Deepwoods Software -- Custom Software Services http://www.deepsoft.com/ -- Linux Administration Services heller(a)deepsoft.com -- Webhosting Services

5 4

Re: [CentOS] how do I download pictures from a dumb phone?
by Mike - st257 01 Dec '15

01 Dec '15

On Fri, Nov 27, 2015 at 10:26 PM, John R Pierce <pierce(a)hogranch.com> wrote: > >> dumb phone services have no email at all unless you pay Verizon or > whomever $$ per email message sent. > > Create a picture message and instead of putting in a cell phone number, put in an email address. Same goes for text messages. I've used BitPim in the past with some success. I don't believe I've ever used BitPim on CentOS though. For a few pictures, simply send picture messages to your email address. -- ---~~.~~--- Mike // SilverTip257 //

1 0

Idiot-proof method to format a flash drive
by Frank Cox 01 Dec '15

01 Dec '15

Whenever I format a flash drive I'm always terrified that I'm going to fat-finger something in the terminal and accidentally blow away a partition on one of my hard drives. *shudder* Is gparted the best gui to handle this task? Or is there something better? I'd really prefer something more limited that just allows me to select whatever it sees as a removable drive and disallows any screwin' about with the other drives. "Format the USB connected drive?". "Choose format (ext4, ext3, fat32)". "Blammo." -- MELVILLE THEATRE ~ Real D 3D Digital Cinema ~ www.melvilletheatre.com

4 4

CentOS 7 and ips.ko
by gigzbyte 01 Dec '15

01 Dec '15

Hi all! I have the old IBM E-Server 346 with IBM ServeRAID 7-k controller. It works with CentOS 6 ips.ko module, but when i try to install fresh CentOS 7.1 - i can't find this module on the install cd and raid controller didn't recognised. How can i get it working? Thank you! ______________ With regards, Dmitry L --- Это сообщение проверено на вирусы антивирусом Avast. https://www.avast.com/antivirus

2 1

SOT: MariaDB 5.5.x-MariaDB logs are not going to desired .log file
by reynierpm＠gmail.com 30 Nov '15

30 Nov '15

Hi there, I know this is off-topic or semi off-topic but I really need some help since I am stucked. I'm trying to redirect MariaDB logs to `/var/log/mysql/*.log` files as shown below on the `/etc/my.cnf.d/server.cnf` file: # # These groups are read by MariaDB server. # Use it for options that only the server (but not clients) should see # # See the examples of server my.cnf files in /usr/share/mysql/ # # this is read by the standalone daemon and embedded servers [server] # this is only for the mysqld standalone daemon [mysqld] #wait_timeout=28800 #interactive_timeout = 28800 max_allowed_packet=512M #General Query Log general_log_file = /var/log/mysql/mysql_query.log general_log = 1 #Error Log log_error = /var/log/mysql/mysql_error.log #Slow Query Log slow_query_log = 1 slow_query_log_file = /var/log/mysql/mysql_slow.log long_query_time = 2 log-queries-not-using-indexes collation-server = utf8_general_ci init-connect='SET NAMES utf8' character-set-server = utf8 # this is only for embedded server [embedded] # This group is only read by MariaDB servers, not by MySQL. # If you use the same .cnf file for MySQL and MariaDB, # you can put MariaDB-only options here [mariadb] # This group is only read by MariaDB-10.0 servers. # If you use the same .cnf file for MariaDB of different versions, # use this group for options that older servers don't understand [mariadb-5.5] `mysql_query.log`, `mysql_error.log` and `mysql_slow.log` should go to `/var/log/mysql/`, right? For some reason, unknow to me, they are not going. I did run the following query: MariaDB [(none)]> show variables like '%log%'; And this is the output: +-------------------------------------------+--------------------------------------------------------------------------------------------------------------+ | Variable_name | Value | +-------------------------------------------+--------------------------------------------------------------------------------------------------------------+ | aria_checkpoint_log_activity | 1048576 | | aria_log_file_size | 1073741824 | | aria_log_purge_type | immediate | | aria_sync_log_dir | NEWFILE | | back_log | 50 | | binlog_annotate_row_events | OFF | | binlog_cache_size | 32768 | | binlog_checksum | NONE | | binlog_direct_non_transactional_updates | OFF | | binlog_format | STATEMENT | | binlog_optimize_thread_scheduling | ON | | binlog_stmt_cache_size | 32768 | | expire_logs_days | 0 | | general_log | OFF | | general_log_file | pdone-prod.log | | innodb_flush_log_at_trx_commit | 1 | | innodb_locks_unsafe_for_binlog | OFF | | innodb_log_block_size | 512 | | innodb_log_buffer_size | 8388608 | | innodb_log_file_size | 5242880 | | innodb_log_files_in_group | 2 | | innodb_log_group_home_dir | ./ | | innodb_mirrored_log_groups | 1 | | innodb_recovery_update_relay_log | OFF | | innodb_use_global_flush_log_at_trx_commit | ON | | log | OFF | | log_bin | OFF | | log_bin_trust_function_creators | OFF | | log_error | /var/lib/mysql/pdone-prod.pdi-inc.com.err | | log_output | FILE | | log_queries_not_using_indexes | OFF | | log_slave_updates | OFF | | log_slow_filter | admin,filesort,filesort_on_disk,full_join,full_scan,query_cache,query_cache_miss,tmp_table,tmp_table_on_disk | | log_slow_queries | OFF | | log_slow_rate_limit | 1 | | log_slow_verbosity | | | log_warnings | 1 | | max_binlog_cache_size | 18446744073709547520 | | max_binlog_size | 1073741824 | | max_binlog_stmt_cache_size | 18446744073709547520 | | max_relay_log_size | 0 | | relay_log | | | relay_log_index | | | relay_log_info_file | relay-log.info | | relay_log_purge | ON | | relay_log_recovery | OFF | | relay_log_space_limit | 0 | | slow_query_log | OFF | | slow_query_log_file | pdone-prod-slow.log | | sql_log_bin | ON | | sql_log_off | OFF | | sync_binlog | 0 | | sync_relay_log | 0 | | sync_relay_log_info | 0 | +-------------------------------------------+--------------------------------------------------------------------------------------------------------------+ 54 rows in set (0.01 sec) I have tried putting same config at `[mariadb]` and `[mariadb-5.5]` and result is the same. Why changes are not working? I have restarted MariaDB (mysql) service several times and even I have restarted the whole server. Seems like MariaDB is not reading those values, any advice?

2 3

Thunderbird 38.4.0 not offered, see it in packages, repomd outdated?
by Patrick Bervoets 30 Nov '15

30 Nov '15

Hi, first: I did several yum clean all's :-) Thunderbird 38.4.0 is not offered. I see: http://mirror.centos.org/centos/6/updates/x86_64/Packages/thunderbird-38.4.… - 27-Nov-2015 06:58 - 56M But: http://mirror.centos.org/centos/6/updates/x86_64/repodata/repomd.xml - 18-Nov-2015 20:00 - 3.4K Shouldn't repomd also be updated or am I mistaken? Thanks Patrick

2 1

odd entry in /var/log/messages
by Fred Smith 29 Nov '15

29 Nov '15

As of five or so days ago I'm getting a ton of messages like those below in /var/log/messages: Nov 29 13:17:59 fcshome sendmail[24977]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 13:17:59 fcshome sendmail[24977]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 13:28:21 fcshome sendmail[25101]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 13:28:21 fcshome sendmail[25101]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 13:38:06 fcshome sendmail[25209]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 13:38:06 fcshome sendmail[25209]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 13:41:26 fcshome sendmail[25275]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 13:41:26 fcshome sendmail[25275]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 13:50:41 fcshome sendmail[25504]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 13:50:41 fcshome sendmail[25504]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 14:05:52 fcshome sendmail[25797]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 14:05:52 fcshome sendmail[25797]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 14:15:42 fcshome sendmail[25905]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 14:15:42 fcshome sendmail[25905]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 14:25:36 fcshome sendmail[26021]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 14:25:36 fcshome sendmail[26021]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 14:36:29 fcshome sendmail[26171]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 14:36:29 fcshome sendmail[26171]: unable to open Berkeley db /etc/sasldb2: No such file or directory there are A TON of them. I've not (intentionally) configured sasl for sendmail. I do have dovecot configured so my wife can use pop3, and the authentication is specifically set to use the local linux box's username and password. It has been set that way for at least two years, and I've not changed anything. I did some googling and most of the hits talk about configuration errors in cyrus-sasl. But since I"m not running that, I don't know where else to dig. Anyone have a clue why I'm getting these, suddenly? and more importatnly, how to fix it? thanks! -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ----------------------------- "For the word of God is living and active. Sharper than any double-edged sword, it penetrates even to dividing soul and spirit, joints and marrow; it judges the thoughts and attitudes of the heart." ---------------------------- Hebrews 4:12 (niv) ------------------------------

1 0

how do I download pictures from a dumb phone?
by Michael Hennebry 29 Nov '15

29 Nov '15

How do I download pictures from a dumb phone? I have a Samsung phone I bought at a Walmart. According the the front, it worships Verizon. Beyond that, I'm not at all sure what kind. If I use a real USB connector to connect it to my PC, CentOS sees it as a character special device. What, if anything, I can do with that device, I do not know. I've not found any settings related to USB. In case it helps, from menu->settings->phone info: S/W V. U365.GG01 H/W V. U365.04 -- Michael hennebry(a)web.cs.ndsu.NoDak.edu "Sorry but your password must contain an uppercase letter, a number, a haiku, a gang sign, a heiroglyph, and the blood of a virgin." -- someeecards

5 10

Networking Question
by Alice Wonder 27 Nov '15

27 Nov '15

Hello, I may have opportunity to obtain a Intel EXPI9404PTLBLK PRO/1000 PT Quad Port ethernet adapter at a significantly reduced price. What I would like to do with it, I want to make sure it is possible and sane before I buy it. -=- Device sits in CentOS box that connects directly to Internet via onboard network adapter. It pretty much only acts as a NAT router + dhcp server + unbound recursive DNS for the private networks. The four ethernet interfaces on the Intel adapter then : Private Network A: 192.168.10.0/24 Private Network B: 192.168.20.0/24 Private Network C: 192.168.30.0/24 Private Network D: 192.168.40.0/24 A will have a NAS. I can reach it from Internet (via port forwarding) and B and C (routing table) but from it, I can not connect to Internet or B, C, D. That network which likely will only have a few devices can not initiate connection to Internet or the other networks. B is my trusted home network. It can connect to Internet (NAT) and to A (port forwarding) but can not reach C or D C is untrusted home network. Things like my TV and Bluray player that need Internet access but that I don't want to have the ability to reach anything on B, but I do want them to be able to talk to NAS on A via port forwarding. I'm always paranoid about those devices on my network, I don't trust what they are doing. Call it tin foil but I don't trust them. Yet they don't work right without access to Internet (updates / netflix) D when used is network for guests (will have cheap wifi attached), it only talks to Internet via straight NAT and can not talk to private networks A, B, C -=- Is this sane ?

6 12

xfs or btrfs
by Milton Plasencia 27 Nov '15

27 Nov '15

Hi, For real time applications, what file system is recommended to use, XFS or BTRFS on Centos 7 or Redhat 7? Cheers, M.

4 3

Re: [CentOS] Newbie alert
by James B. Byrne 27 Nov '15

27 Nov '15

On Thu, November 26, 2015 12:30, John R Pierce wrote: > > how open is RH to bug fix submissions from non-customers? > > I got the impression most of their bug fixes were done internally by > employees, a large part of which consists of backporting fixes from > upstream FOSS projects. > This is my experience as well. The only thing that RedHat has ever done with my bug reports is point me to the upstream projects to have it fixed/altered/added there. They will however, occasionally accept some nudges about updating software that the upstream project has already released. -- *** e-Mail is NOT a SECURE channel *** Do NOT transmit sensitive data via e-Mail James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

2 1

LDAP setup on Centos 7
by Gary Stainburn 27 Nov '15

27 Nov '15

I am trying to get LDAP working on my mail server for both user authentication and addressbook purposes. I have tried the tutorials on both http://www.server-world.info/en/note?os=CentOS_7&p=openldap&f=1 and http://albanianwizard.org/ubuntu-10-0-4-lucid-lynx-ldap-configuration-the-w… (The second one is for Ubuntu, but claimed to be a complete and working demo) However, when I try to last part of each of these tutorials I get the following. ldapadd -x -D cn=admin,dc=ringways,dc=com -W -f /tmp/dit.ldif Enter LDAP Password: ldap_bind: Invalid credentials (49) Note: in the server-world one I tried using "dc=ringways,dc=com" as well as leaving it as "dc=server,dc=world" but it didn't seem to make any difference. After each attempt I reset everything using the following script. [root@ollie2 ~]# cat reset_ldap.sh #!/bin/bash -x systemctl stop slapd rpm -e openldap-servers openldap-clients cd /var/lib rm -Rf ldap cd /etc/openldap/ rm -Rf slapd.d/ yum -y install openldap-servers openldap-clients cp /usr/share/openldap-servers/DB_CONFIG.example /var/lib/ldap/DB_CONFIG systemctl start slapd slaptest -F /etc/openldap/slapd.d [root@ollie2 ~]# Do I need to do anything else, as it would appear that there is something I'm missing.

3 6

CentOS-announce Digest, Vol 129, Issue 10
by centos-announce-request＠centos.org 27 Nov '15

27 Nov '15

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2015:2519 Important CentOS 5 thunderbird Security Update (Johnny Hughes) 2. CESA-2015:2519 Important CentOS 6 thunderbird Security Update (Johnny Hughes) 3. Announcing Release for Gluster 3.7 on CentOS Linux 7 x86_64 (Niels de Vos) ---------------------------------------------------------------------- Message: 1 Date: Fri, 27 Nov 2015 06:41:12 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2015:2519 Important CentOS 5 thunderbird Security Update Message-ID: <20151127064112.GA26875(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2015:2519 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2015-2519.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: bb8e25af5ff6287b1e25e1f022e4fa5194721bf442d1ad84523cc3000b320d8e thunderbird-38.4.0-1.el5.centos.i386.rpm x86_64: b234caf73d4d5b8819dc8ba3fd8a15f9a221b8f90dd3e4ebdbb9331dd5dcf86c thunderbird-38.4.0-1.el5.centos.x86_64.rpm Source: 080d0b3b6404131402cc2da5db51316ba96c6944488f8d44a7d788cdcf82a24d thunderbird-38.4.0-1.el5.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: JohnnyCentOS ------------------------------ Message: 2 Date: Fri, 27 Nov 2015 06:59:48 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2015:2519 Important CentOS 6 thunderbird Security Update Message-ID: <20151127065948.GA52471(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2015:2519 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2015-2519.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 7d94acf6d46a4ffa415d8eefece825154c79f6c080b694c3f0780dd9b65271d6 thunderbird-38.4.0-1.el6.centos.i686.rpm x86_64: 655c0162a6bb9d918c8a497531329d5ba13225a2cea9ce5f46756426ad066cbc thunderbird-38.4.0-1.el6.centos.x86_64.rpm Source: 58473f1a2f8951dd8f8b2276f07e3c2da8894a1f8ebaa65b0b4d90d6eb63a50b thunderbird-38.4.0-1.el6.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 3 Date: Fri, 27 Nov 2015 11:35:32 +0100 From: Niels de Vos <ndevos(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing Release for Gluster 3.7 on CentOS Linux 7 x86_64 Message-ID: <20151127103532.GM6779(a)ndevos-x240.usersys.redhat.com> Content-Type: text/plain; charset="us-ascii" Over the last few weeks we have been working on getting the repositories and related bits in place so that the Storage SIG is able to release Gluster packages for general consumption. I am pleased to announce that the majority of the requested versions are now available. Users can now simple install Gluster on CentOS 6 and 7 with only these two commands: # yum install centos-release-gluster # yum install glusterfs-server The centos-release-gluster content comes from the centos-release-gluster37 package delivered via CentOS Extras repos. This contains all the metadata and dependancy information, needed to install Gluster 3.7. For people looking at running Gluster 3.6, we will soon also release a centos-release-gluster36 package. In order to get this version, substitute the step-1 mentioned above with : yum install centos-release-gluster36. A new announcement will be posted once this content has been tested and released. We have a quickstart guide specifically built around the packages we are releasing today, it makes for a good introduction to Gluster and will help get you started in just a few simple steps, this quick start is available at https://wiki.centos.org/SpecialInterestGroup/Storage/gluster-Quickstart More details about the packages that the Gluster project provides in the Storage SIG is available in the documentation: https://wiki.centos.org/SpecialInterestGroup/Storage/Gluster The centos-release-gluster* repositories offer additional packages that enhance the usability of Gluster itself. Users can request additional tools and applications to be provided, just send us an email with your suggestions. The current list of packages that is (planned to become) available can be found here: https://wiki.centos.org/SpecialInterestGroup/Storage/Gluster/Ecosystem-pkgs Gluster is the first project that provides packages through the Storage SIG. Other projects are in the process to do so too. General information about the SIG can be read in the wiki: https://wiki.centos.org/SpecialInterestGroup/Storage We welcome all feedback, comments and contributions. You can get in touch with the CentOS Storage SIG on the centos-devel mailing list ( https://lists.centos.org ) and with the Gluster developer and user communities at https://www.gluster.org/mailman/listinfo , we are also available on irc at #gluster on irc.freenode.net, and on twitter at @gluster . Cheers, Niels de Vos Storage SIG member & Gluster maintainer

1 0

Does anaconda serve any purpose after installation?
by Frank Cox 27 Nov '15

27 Nov '15

Is there any reason or need to keep anaconda around after a system is up and running, or would "yum remove anaconda" be a good idea? -- MELVILLE THEATRE ~ Real D 3D Digital Cinema ~ www.melvilletheatre.com

2 1

C7: How to configure raid at install time
by Fred Smith 27 Nov '15

27 Nov '15

Hi all! I'm still on C6. I'm using a RAID1 configuration (Linux software RAID) and I'd like to either use the same one, or possibly configure it on new drives (larger) when I upgrade to C7. (I'm really feeling the need to move off C6.) But it isn't at all obvious how one would do a new RAID1 setup in Anaconda, and I don't find any user reports or other info on this in the WIKI or forums (fora, properly, if I recall my high school Latin). Can anyone provide (or give pointers to) a good recipe for doing this? thanks! Fred -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ---------------------------- Do you not know? Have you not heard? The LORD is the everlasting God, the Creator of the ends of the earth. He will not grow tired or weary, and his understanding no one can fathom. ----------------------------- Isaiah 40:28 (niv) -----------------------------

7 22

install rrdtools-devel / rrdtool-perl
by Leandro 26 Nov '15

26 Nov '15

Hi guys , Im have some problems installing the following packages: rrdtool-devel rrdtool-perl Before we moved to centos/rhel7 it was a simple task, just doing: yum install rrdtool rrdtool-devel and rrdtool-perl was enough. Now, I only can install the rrdtool package but not rrdtool-devel and rrdtool-perl. I tryed adding some repos, but I think I added wrong ones. Also tryed downloading and installing packages with rpm -ivh but there is allwais a missing dependence. Can you help me ? Thanks.

5 10

OT: bareos, Windoze, beating head on wall
by m.roth＠5-cent.us 26 Nov '15

26 Nov '15

Again, I'm posting here because when I tried their mailing list, I didn't get much response. I'm trying to do a restore, from my CentOS 6 box, to a WinDoze box. The restore command is *not* user-friendly if you just want to restore a few files. And it gets weird.... First, I have to mark my path first - I don't just see it with ls. Then, when I do an ls, in c:/Users/<username/Documents/, it shows *MATLAB *My Music *My Pictures *My Videos *Visual Studio 2005/ *Visual Studio 2008/ *desktop.ini *None* of which are there. All that's there are teo files, testfile.bak and testfile.txt. MATLAB is in some other user's directory.... Here's the fileset spec from bareos-dir.conf FileSet { Name = "citdcbhebronset" Include { Options { Signature = MD5 # calculate md5 checksum per file Ignore Case = yes } File = "c:/Users" } } Anyone have any clue as to what I'm doing wrong? Googling - a lot of it - gives me 90% the bareos docs, and very little else. mark

3 7

Newbie alert
by Shraddha Barke 26 Nov '15

26 Nov '15

Hello guys! I'm Shraddha , an opensource enthusiast and a regular contributor to the linux-kernel project. I'm currently an intern at Linux Kernel selected through the Outreachy program. I started contributing to opensource only 5 months ago but I'm already quite active. I would like to join the centos project.Any help on getting started is appreciated :) Kind Regards, Shraddha -- Shraddha

4 6

IP table Restore
by Siva Prasad Nath 26 Nov '15

26 Nov '15

Hi, If possible advice me for below error. [root@ns1 sysconfig]# iptables-restore < /etc/sysconfig/iptables iptables-restore: line 2 failed Thanks in advance.

8 17

Glibc vulnerbality CVE-2015-1781
by Venkateswara Rao Dokku 26 Nov '15

26 Nov '15

Hi, We are using CentOS 5.5 as a base OS for one of our products.The version of Glibc we are using was glibc-2.5-123.el5_11.1. We wanted to see whether this glibc is vulerable to CVE-2015-1781. I have gone through re-documentation & came across the following link https://access.redhat.com/security/cve/cve-2015-1781 In the link it is mentioned that, the CVE will not be fixed in Red-Hat 5 version. What does that mean? I mean, whether the RedHat 5 is vulnerable & fix is not available or RedHat 5 is not vulnerable, hence the fix is not given? Thanks for the info. -- Thanks & Regards, Venkat

3 2

Help with Intel 6235 Wireless on CentOS 7 (pointer to good reading?)
by Valeri Galtsev 25 Nov '15

25 Nov '15

Dear Experts, I would like to ask your advise on good reading about how to add WiFi device, and how to control its settings on CentOS. Sounds really dumb, but this is what I am NOT able to do on CentOS 7 what I was able to do in the past, beginning somewhere since RedHat 5 or 6, through Fedora and up to CentOS 6. In brief: my card is Intel 6235; CentOS 7 (fully updatted), latest kernel (3.10.0-229.20.1), relevant Intel firmware version for my card is in /lib/firmware (together with large bunch of other Intel WiFi firmware), relevant modules are loaded in kernel: iwlwifi iwldvm mac80211 cfg80211 "/sbin/ifconfig -a" shows my device in the list renamed to wlp3s0 (according to PCI slot numbering I figure), dmesg shows device brought up successfully detected and renamed as above. lspci shows device with its correct full name (Network controller: Intel Corporation ... 6235" Now comes the fun part (no, troublesome for me part). When I click on the NetworkManager Applet in right top corner, there are no WiFi devices. I go to Network Settings from there. My device is in the list under name "PCI Unknown". I click on that, the device is described as "unmanaged", and there is no way to make changes to the contrary to other devices (correct MAC address is displayed). OK, I assume I just need to declare device as NM_CONTROLLED. There is no relevant /etc/sysconfig/ifcfg-wlp3s0 - where I know I can declare that. I use "nmtui" to add configuration, then add to ifcfg-wlp3s0 NM_CONTROLLED="yes" line. Reboot. Still the same. Just for comparison I booted Ubuntu 14.0.4 x86_64 live CD. Yes, it can see my wireless, and I can connect to WiFi networks. Kernel is just a notch newer (3.13.0.24) which shouldn't matter according to Intel information which kernel versions this device is supported in. List of relevant kernel modules loaded by ubuntu is exactly the same. I don't see anything weird like the need to separately load firmware as kernel module (yes, indeed I'm going nuts, that would be "freebsd-ism" I guess). I do not want to have Ubuntu (or Debian which likely will work out of the box too) on this laptop. So, apparently I need a pointer to good reading on how do we do it on CentOS 7 "dirty way" - when "click here, choose in menu that" doesn't work. Thanks a lot for your advises! Valeri ++++++++++++++++++++++++++++++++++++++++ Valeri Galtsev Sr System Administrator Department of Astronomy and Astrophysics Kavli Institute for Cosmological Physics University of Chicago Phone: 773-702-4247 ++++++++++++++++++++++++++++++++++++++++

2 2

Install Firewalld
by Siva Prasad Nath 25 Nov '15

25 Nov '15

I am trying to install Firewalld. I am using CENTOS 7. Please help me to solve the error. [root@ns1 httpd]# systemctl enable firewalld [root@ns1 httpd]# systemctl start firewalld [root@ns1 httpd]# systemctl status firewalld firewalld.service - firewalld - dynamic firewall daemon Loaded: loaded (/usr/lib/systemd/system/firewalld.service; enabled) Active: inactive (dead) since Thu 2015-11-26 02:43:16 SGT; 11s ago Process: 35808 ExecStart=/usr/sbin/firewalld --nofork --nopid $FIREWALLD_ARGS (code=exited, status=0/SUCCESS) Main PID: 35808 (code=exited, status=0/SUCCESS) Nov 26 02:43:16 ns1.currencybooking.com systemd[1]: Started firewalld - dynamic firewall daemon. Nov 26 02:43:16 ns1.currencybooking.com firewalld[35808]: 2015-11-26 02:43:16 ERROR: ebtables not usable, disabling ethernet bridge firewall. Nov 26 02:43:16 ns1.currencybooking.com firewalld[35808]: 2015-11-26 02:43:16 FATAL ERROR: No IPv4 and IPv6 firewall. Nov 26 02:43:16 ns1.currencybooking.com firewalld[35808]: 2015-11-26 02:43:16 ERROR: Raising SystemExit in run_server [root@ns1 httpd]# ERROR: ebtables not usable, disabling ethernet bridge firewall.^C [root@ns1 httpd]# firewall-cmd --state not running Shiva Prasad Nath 92981134

2 1

Poor perfmance of bridged interfaces
by Sergio Belkin 25 Nov '15

25 Nov '15

Hi, I've created a bridge using 2 interfaces and have a lot of messages as follows: nov 12 15:30:22 localhost kernel: br0: received packet on enp0s3 with own address as source address nov 12 15:30:22 localhost kernel: br0: received packet on enp0s3 with own address as source address And the operating systems is extremely slow Interfaces files : [root@localhost ~]# cat /etc/sysconfig/network-scripts/ifcfg-* DEVICE=br0 TYPE=Bridge BOOTPROTO=dhcp ONBOOT=yes #STP=on #DELAY=0 NM_CONTROLLED=no DEVICE=enp0s3 #HWADDR=08:00:27:AB:1D:E6 BOOTPROTO=none ONBOOT=yes NM_CONTROLLED=no BRIDGE=br0 DEVICE=enp0s8 HWADDR=08:00:27:A3:98:E6 BOOTPROTO=none ONBOOT=yes NM_CONTROLLED=no BRIDGE=br0 DEVICE=lo TYPE=loopback IPADDR=127.0.0.1 NETMASK=255.0.0.0 NETWORK=127.0.0.0 # If you're having problems with gated making 127.0.0.0/8 a martian, # you can change this to something else (255.255.255.255, for example) BROADCAST=127.255.255.255 ONBOOT=yes NAME=loopback I've disabled NetworkManager, but problem persists. System is: [root@localhost ~]# uname -a Linux localhost 3.10.0-123.el7.x86_64 #1 SMP Mon Jun 30 12:09:22 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux And is virtualized on VirtualBox Please could you help me to fix it? Thanks in advance! -- -- Sergio Belkin LPIC-2 Certified - http://www.lpi.org

9 25

OT: Replacing Venerable NAS
by Tim Evans 25 Nov '15

25 Nov '15

I have an original-label Infrant (now NetGear) ReadyNAS storage appliance that's been running for 8+ years. Except for replacing its power supply, it has not skipped a beat in all this time. I use it primarily as a backup device (via NFS) for a couple of Linux machines, (via SMB) for a couple of Windows PC's, and (via ftp) for web sites at my hosting provider. SMART+ reporting shows ~75K hours operation, with zero sectors reallocated, on each of the four disks. I'm thinking I should be looking for a replacement, even with all this good info/luck. Would like to hear recommendations here. Besides the ReadyNAS, I have worked with a Thecus NAS (don't recall model). What are the features I should look at? Thanks. -- Tim Evans |5 Chestnut Court 443-394-3864 |Owings Mills, MD 21117

14 24

Re: [CentOS] Google Ads in rsyslog documentation files
by m.roth＠5-cent.us 25 Nov '15

25 Nov '15

Peter Eckel wrote: > Hi all, > > I know this comes from upstream (and most likely from the rsyslog project itself), but what's your opinion about Google Ads in system documentation files? > >> [peckel@mucnvjmppmtr01 ~]$ cat /etc/redhat-release >> Red Hat Enterprise Linux Server release 6.7 (Santiago) >> [peckel@mucnvjmppmtr01 ~]$ grep google /usr/share/doc/rsyslog-5.8.10/* /usr/share/doc/rsyslog-5.8.10/rsyslog_secure_tls.html:google_ad_client = "pub-3204610807458280"; >> /usr/share/doc/rsyslog-5.8.10/rsyslog_secure_tls.html:google_ad_slot = "5958614527"; >> /usr/share/doc/rsyslog-5.8.10/rsyslog_secure_tls.html:google_ad_width = 125; <snip> > I find it rather disconcerting if there are commercial ads embedded in help texts I find on my open source servers. "Disconcerting" isn't the word I would use. Completely unacceptable is what I'd say. I think it's time to put in a bug report to upstream.... I need to check with my manager. I do note this is not the case in rsyslog on CentOS 7. mark

3 4

Regional CentOS Specific Meetup groups
by Karanbir Singh 25 Nov '15

25 Nov '15

Hi, Just a quick post to say that I've setup a CentOS users group in the UK at http://www.meetup.com/CentOS-UK - aim to start organising regular demos and meetups face 2 face around the country. If you are based in the UK, I encourage you to come join the group. Also note that we have a CentOS group in India at http://www.meetup.com/CentOS-India/ and another group for the Netherlands at http://www.meetup.com/CentOS-Netherlands/ Regards and hope to see you at one of these meetups soon, -- Karanbir Singh, Project Lead, The CentOS Project +44-207-0999389 | http://www.centos.org/ | twitter.com/CentOS GnuPG Key : http://www.karan.org/publickey.asc

1 0

How & where to add
by Siva Prasad Nath 24 Nov '15

24 Nov '15

auto eth0 iface eth0 inet static address 192.168.50.2 netmask 255.255.255.0 -- Shiva Prasad Nath 92981134

4 3

LVM - stripped logical volumes by default?
by Rafał Radecki 24 Nov '15

24 Nov '15

Hi All. I am currently using OpenStack Juno on CentOS 7. The problem is that by default OpenStack's Cinder service creates logical volumes of "linear" type. I would like to have them stripped over all physical disks to get better write performance. Is there a way to tell LVM to create by default stripped volumes instead of linear ones? BR, Rafal.

1 0

Re: [CentOS] Unit networkmanager.service not loaded
by Richard 24 Nov '15

24 Nov '15

> >> On Tue, Nov 24, 2015 at 11:01 PM, Richard wrote: > Date: Tuesday, November 24, 2015 22:48:30 +0800 > From: Siva Prasad Nath <shivaprasadnath21(a)gmail.com> > To: CentOS mailing list <centos(a)centos.org>, centos-devel(a)centos.org > Subject: [CentOS] Unit networkmanager.service not loaded > > systemctl stop networkmanager returns Unit > networkmanager.service not loaded > >> >> Hint -- try the: >> >> systemctl list-units | grep ... >> >> concept that you used previously and see what output you get. >> [sub-hint -- the *nix world is case sensitive.] >> >> This is a user (understanding) issue -- why are you including the >> "-devel" list? Don't. >> >> >>> Date: Tuesday, November 24, 2015 23:19:53 +0800 >>> From: Siva Prasad Nath <shivaprasadnath21(a)gmail.com> >>> >>> I can see below in development server >>> network.service >>> loaded active exited LSB: Bring up/down >>> networking NetworkManager.service >>> loaded active running Network Manager >>> >>> But not able to see in production. >>> >>> >>> Shiva Prasad Nath Well then, you need to figure out what you did differently in setting up these two environments. This is something specific to your process and procedures (or hardware/environment). There's not much that we can help you with as you haven't provided any details. Please do not top post on this list.

1 0

Re: [CentOS] Unit networkmanager.service not loaded
by Richard 24 Nov '15

24 Nov '15

> Date: Tuesday, November 24, 2015 22:48:30 +0800 > From: Siva Prasad Nath <shivaprasadnath21(a)gmail.com> > To: CentOS mailing list <centos(a)centos.org>, centos-devel(a)centos.org > Subject: [CentOS] Unit networkmanager.service not loaded > > systemctl stop networkmanager returns Unit networkmanager.service > not loaded Hint -- try the: systemctl list-units | grep ... concept that you used previously and see what output you get. [sub-hint -- the *nix world is case sensitive.] This is a user (understanding) issue -- why are you including the "-devel" list? Don't.

2 1

Unit networkmanager.service not loaded
by Siva Prasad Nath 24 Nov '15

24 Nov '15

systemctl stop networkmanager returns Unit networkmanager.service not loaded

1 0

LVM - how to change lv from linear to stripped? Is it possible?
by Rafał Radecki 24 Nov '15

24 Nov '15

Hi All. Currently I am trying to change a logical volume from linear to stripped because I would like to have a better write throughput. I would like to perform this change "live" without stopping access to this lv. I have found two interesting examples: http://community.hpe.com/t5/System-Administration/Need-to-move-the-data-fro… http://www.depesz.com/2015/10/08/converting-logical-volume-so-that-its-stri… Both say basically to: - change the lv to a mirrored one by adding a stripped copy (~second device in RAID1) - change it back to a non-mirrored one by removing the primary linear lv (~first, source device in RAID1) My os is: $ cat /etc/redhat-release CentOS Linux release 7.1.1503 (Core) $ uname -r 3.10.0-229.14.1.el7.x86_64 $ rpm -qa | grep -i lvm lvm2-libs-2.02.115-3.el7_1.1.x86_64 lvm2-2.02.115-3.el7_1.1.x86_64 And the solution proposed in above examples does not work on it. After (lv xxx is only on /dev/sdb4 before): # lvconvert --mirrors 1 --stripes 4 /dev/cinder-volumes/xxx /dev/sda4 /dev/sdc4 /dev/sdd4 /dev/sdf4 I am getting in "lvdisplay -m": --- Logical volume --- LV Path /dev/cinder-volumes/xxx LV Name xxx VG Name cinder-volumes LV UUID AKjKAo-66cv-Ygc2-4Ykq-sSJQ-RJOY-mfjoMD LV Write Access read/write LV Creation host, time test.local, 2015-10-28 17:45:28 +0100 LV Status available # open 1 LV Size 64.01 GiB Current LE 16386 Mirrored volumes 2 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 8192 Block device 253:22 --- Segments --- Logical extents 0 to 16385: Type raid1 Monitoring monitored Raid Data LV 0 Logical volume xxx_rimage_0 Logical extents 0 to 16385 Raid Data LV 1 Logical volume xxx_rimage_1 Logical extents 0 to 16385 Raid Metadata LV 0 xxx_rmeta_0 Raid Metadata LV 1 xxx_rmeta_1 And in "pvdisplay -m": --- Physical volume --- PV Name /dev/sda4 VG Name cinder-volumes PV Size 2.73 TiB / not usable 4.00 MiB Allocatable yes PE Size 4.00 MiB Total PE 715255 Free PE 287476 Allocated PE 427779 PV UUID IrkkwI-AqpP-bTll-vlPq-NDSe-rDUg-ecAnkp ... Physical extent 427776 to 427776: Logical volume /dev/cinder-volumes/xxx_rmeta_1 Logical extents 0 to 0 Physical extent 427777 to 444162: Logical volume /dev/cinder-volumes/xxx_rimage_1 Logical extents 0 to 16385 --- Physical volume --- PV Name /dev/sdb4 VG Name cinder-volumes PV Size 2.73 TiB / not usable 4.00 MiB Allocatable yes PE Size 4.00 MiB Total PE 715255 Free PE 698868 Allocated PE 16387 PV UUID hx0a1v-M68S-aPBL-1x9r-8EiD-3cu3-GQPLRo --- Physical Segments --- Physical extent 0 to 0: Logical volume /dev/cinder-volumes/xxx_rmeta_0 Logical extents 0 to 0 Physical extent 1 to 16386: Logical volume /dev/cinder-volumes/xxx_rimage_0 Logical extents 0 to 16385 Physical extent 16387 to 715254: FREE So the migration to a RAID1 logical volume is successful but the stripping (above "lvconvert --mirrors 1 --stripes 4 /dev/cinder-volumes/xxx /dev/sda4 /dev/sdc4 /dev/sdd4 /dev/sdf4") is not taken into consideration because only /dev/sda4 and /dev/sdb4 are used for xxx logical volume afterwards. Also when I run: # lvconvert -m 0 /dev/cinder-volumes/xxx /dev/sdb4 afterwards I get xxx logical volume only on /dev/sda4 and it is linear (not stripped). Can someone help me with this? ;) BR, Rafal.

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss