- Discuss - lists.centos.org

Tool to track files
by Fajar Priyanto 02 Oct '11

02 Oct '11

Hi all, Due to some reason, I will have to stop using Samba as our fileserver, and instead replace it with SSH access only. Users will be able to use WinSCP for it. The question is, is there any tool to track files (what is new files, deleted files by who, etc)? In Samba I can do that. I don't know how if it's SSH access. Thank you Fajar.

2 1

Openvz inside a KVM guest?
by Bob Hoffman 02 Oct '11

02 Oct '11

Open vz is a container VM....software, not hardware dependent. Is is possible to make a server a centos 6 KVM host, install centos 6 as a guest system... and then install openvz (or something like that) in the guest OS? thus instead of two websites each with its own guest image, you can put both inside the guest and still have them kind of sandboxed? or is that crazy?

1 0

add on sata card relabeling drives, installation
by Bob Hoffman 01 Oct '11

01 Oct '11

Hi all. I have a new server and am playing with the installation. (centos 6). My onboard sata card has 6 drives attached to it, yet the server has 8 bays. I bought a sata controller card (adaptec) and added it to the mix, adding two more drives. Everything works and all is accessible, but there is one annoying issue. When installing with anaconda, the 2 drives located on the add-on sata card are being listed as sda and sdb instead of going to the back of the line. I would rather my a and b drives be the 0 and 1 sata ports of the onboard controller, but it seems the add-on is taking priority. My only thought is to install without the 2 drives connected and then add them afterwords. But again, that makes no sense to have to do it that way. Is this just normal for the add on sata cards? If I add the drives to the system after I install it all, will linux barf on it and change the drive letters? I do not want my raid 1 mirror OS to be on sdc, sdd, and sde....it just looks weird. thanks

12 37

udev-devel or libudev-devel on CentOS 5.6
by Kaushal Shriyan 01 Oct '11

01 Oct '11

Hi, Is there libudev-devel or udev-devel package available on CentOS 5.6 ? [root@~]# yum search udev-devel Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: centos.aol.in * extras: centos.aol.in * updates: centos.aol.in base | 1.1 kB 00:00 extras | 2.1 kB 00:00 updates | 1.9 kB 00:00 Warning: No matches found for: udev-devel No Matches found [root@~]# yum search libudev-devel Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: centos.aol.in * extras: centos.aol.in * updates: centos.aol.in Warning: No matches found for: libudev-devel No Matches found [root@~]# Regards Kaushal

2 3

innovation of micro$oft...
by lancebaynes87 01 Oct '11

01 Oct '11

http://chrome.blogspot.com/2011/09/problems-with-microsoft-security.html It was just an accident, or not, mr. micro$oft? ...f*ck you..

3 2

CentOS 6 and NIS not working
by Martyn Klassen 30 Sep '11

30 Sep '11

I am having no luck getting NIS to work on a clean install of CentOS 6. It seems to be an issue with ypbind. I have simple /etc/yp.conf which explicitly sets the server domain myDomain server myServer The service seems to start okay #service ypbind start Starting NIS service: [OK] Binding NIS service: … [OK] But when I try to use any of the yp services, like ypwhich #ypwhich ypwhich: Can't communicate with ypbind This is usually blamed on ypbind not running, but ypbind is confirmed to be running #ps -ef | grep ypbind root 3033 1 0 15:11 ? 00:00:00 /usr/sbin/ypbind ypcat also does not work #ypcat netgroup No such map net group. Reason: Can't bind to the server which serves this domain I have double checked that the server is running #rpcinfo -u myServer ypserv program 100004 version 1 ready and waiting program 100004 version 2 ready and waiting The domain name seems to be set correctly as well #domainname myDomain I have tried disabling iptables and selinux, but that has no effect. I am probably missing something obvious, but NIS has never given me these issues before. Any suggestions on what might be the culprit? Martyn

2 2

Running Apache sites as separate users
by Trey Dockendorf 30 Sep '11

30 Sep '11

I had a recent request to improve security on my web servers by having each website use a different user to run the hosting service. So example1.comhas it's own Apache instance running as apache1 and then example2.com has its own instance of Apache as apache2. Is this even possible or realistic? I understand the idea of how that would be secure, much like creating a virtual machine to segregate services. The only way I can think how this is done is to chroot each website. What makes this request even stranger is that each website will be managed by the same CMS and code base. So with that being the case, I don't see how this is possible. Any ideas or insight are very welcome. Thanks - Trey

11 14

ssh -D socks proxy through CentOS-5
by James B. Byrne 30 Sep '11

30 Sep '11

Is there anything special in the way of configuration that is required to enable a CentOS box to act as the point of origin for an http request routed to it via a SOCKS ssh link? I have researched this matter and the recommended procedure is to open an SSH connection to the desired host passing the requisite switches so: ssh -f -n -D <port> user(a)host.domain.tld And then reconfigure the desired applications to use the localhost:<port> as the SOCKS proxy. However, I cannot seem to get this to work with my CentOS based desktop to which I am trying to connect through a public wireless network. I connect to the desktop via terminal (on OSX-10.6.8 fine), but setting the browser, Firefox-3.6.23, advanced network config to use localhost:<port> as a SOCKSv5 proxy for http simply results in the browser failing to show anything. I do not get any error, I just get a blank page for whatever url I try. I have tried this with and without the iptables service running on the target and achieved the same results. Therefore I do not consider the firewall configuration on the target to be the immediate problem. Has anyone here tried to do this and succeeded? Supplemental question: How does one route an https connection to a non-standard port via SOCKS? How does one configure a browser to do this? -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

2 2

Firefox 7 vs latest Flash plugin vs CNN
by fred smith 30 Sep '11

30 Sep '11

I'm seeing a strange issue on my C-5.7 system. running Firefox 7 with the very latest flash plugin. browse to CNN, I can view any of the videos directly linked on the main page, or directly linked on sub-pages. but if I click on the video link at the top of the page (in the red bar) Firefox displays the page as a list of "thumbnails" for each video with a small viewer in the upper left corner, then hangs. the browser is completely unresponsive at this point. if I wait a minute (or two, or three) eventually a message appears in the area where the video should be showing saying: "The flash plugin has crashed." and a link to send a crash report. So, I cannot play any of the videos on the "video" page. however, I CAN play THE VERY SAME VIDEOS if I find a link to the video from another page on cnn. clearly there's something about the "video" page that confuses the heck out of the "poor" flash plugin. I haven't see anyone pos about this, so maybe I'm the only one having this problem... And it all works fine on my eeepc running Centos-6 with Firefox 7 and the same flash version. Advice appreciated, thanks! Fred -- ------------------------------------------------------------------------------- Under no circumstances will I ever purchase anything offered to me as the result of an unsolicited e-mail message. Nor will I forward chain letters, petitions, mass mailings, or virus warnings to large numbers of others. This is my contribution to the survival of the online community. --Roger Ebert, December, 1996 ----------------------------- The Boulder Pledge -----------------------------

1 0

CentOS-announce Digest, Vol 79, Issue 11
by centos-announce-request＠centos.org 30 Sep '11

30 Sep '11

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2011:1341 Critical CentOS 4 i386 firefox - security update (Tru Huynh) 2. CESA-2011:1341 Critical CentOS 4 x86_64 firefox - security update (Tru Huynh) 3. CESA-2011:1343 Critical CentOS 4 i386 thunderbird - security update (Tru Huynh) 4. CESA-2011:1343 Critical CentOS 4 x86_64 thunderbird - security update (Tru Huynh) 5. CESA-2011:1344 Critical CentOS 4 i386 seamonkey - security update (Tru Huynh) 6. CESA-2011:1344 Critical CentOS 4 x86_64 seamonkey - security update (Tru Huynh) ---------------------------------------------------------------------- Message: 1 Date: Thu, 29 Sep 2011 20:48:14 +0200 From: Tru Huynh <tru(a)centos.org> Subject: [CentOS-announce] CESA-2011:1341 Critical CentOS 4 i386 firefox - security update To: centos-announce(a)centos.org Message-ID: <20110929184814.GA18294(a)sillage.bis.pasteur.fr> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory CESA-2011:1341 firefox security update for CentOS 4 i386: https://rhn.redhat.com/errata/RHSA-2011-1341.html The following updated file has been uploaded and is currently syncing to the mirrors: i386: updates/i386/RPMS/firefox-3.6.23-1.el4.centos.i386.rpm source: updates/SRPMS/firefox-3.6.23-1.el4.centos.src.rpm You may update your CentOS-4 i386 installations by running the command: yum update firefox Tru -- Tru Huynh (mirrors, CentOS i386/x86_64 Package Maintenance) http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xBEFA581B

1 0

Error installing Postfix - Mysql Support
by Silvio Tadeu 30 Sep '11

30 Sep '11

Hello: Does anyone have any idea how resolve this error on my server to install postfix with mysql support? Dedicated Server with CentOS 5.7 64 Bit. I get this dependency information when trying to use the command yum-y install postfix Error: Missing Dependency: libmysqlclient.so.15()(64bit) is needed by package 2:postfix-2.3.3-2.3.centos.mysql_pgsql.x86_64 (centosplus) Error: Missing Dependency: libmysqlclient.so.15(libmysqlclient_15)(64bit) is needed by package 2:postfix-2.3.3-2.3.centos.mysql_pgsql.x86_64 (centosplus) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest At the command below: root@server [/tmp]# ldconfig -p | grep libmysqlclient.so.15 libmysqlclient.so.15 (libc6,x86-64) => /usr/lib/libmysqlclient.so.15 libmysqlclient.so.15 (libc6,x86-64) => /usr/lib64/libmysqlclient.so.15 I appreciate any information. Thanks

3 3

passwd problem with new vps
by Marco Fioretti 30 Sep '11

30 Sep '11

greetings, I am setting up Centos 6 i686 remotely, on a new VPS. A problem I have is that I cannot set password for new users. I have created one with useradd -m new_user but when I type passwd new_user this is the result: [root@vps ~]# passwd new_user Changing password for user new_user New password: Retype new password: passwd: Authentication token manipulation error [root@vps ~]# tail /var/log/secure Sep 27 17:30:30 vps passwd: pam_cracklib(passwd:chauthtok): pam_get_authtok_verify returned error: Failed preliminary check by password service but I have no clue what the check I've failed is, or if it's a console problem (locales, weird control characters) or maybe a selinux thing? For the record, if I enter a weak password on purpose, e.g. "amok", everything works, meaning that I get an explanation like "password refused because it's too short", or something like that. But when I try longer passwords, with or without non alphanumeric characters, I get this error. what else should I check, or fix? TIA, Marco

3 3

How to build a webserver, centos 6, videos
by Bob Hoffman 30 Sep '11

30 Sep '11

Hello all, I am going to post videos on a youtube channel showing the steps I am taking in putting together a new server. I am by no means an expert and it is intended for people who just want to get a gist of what it entails. channel: http://www.youtube.com/user/WebserverVideos The first part is done, getting the server and putting it together. Along with my thoughts on the build. Future parts coming in the next few weeks will include comprehensive steps dealing with ipmi, raid 1 arrays, centos 6 as a host, centos 6 as guests...dns servers, webserver guest (mail, apache, etc). Selinux.. and the whole shebang. I will be doing a video of the installation at the datacenter which should be cool for those who have never been in one to do it. Comments open, but moderated. This is just a personal webserver project and will cover the steps I take (and why) in building it. I will be adding a 3550 cisco (as soon as I figure it all out) as a switch for my two servers with a full step by step of updating and configuring it. Feel free to tell me if you see anything completely wrong...or something I might forget. I'll do my best to make it time effective to watch it and learn.

4 5

zoneminder-1.24.4-3.el6.x86_64.rpm
by Thomas Dukes 30 Sep '11

30 Sep '11

For all interested, I have rebuilt the src rpm for zoneminder-1.24.4, fedora 15. Its up and running on CentOS 6.0. Gonna have to d/l some files. Most of mine came from rpm.pbone.net The link is: http://palmettoshopper.com/zoneminder/zonminder-1.24-3.el6.x86_64.rpm Eddie

4 6

data recovery
by Paras pradhan 29 Sep '11

29 Sep '11

Hi, Need help on data recovery. Suddenly my disk device's geometry has been changed to something that doesnot make any sense. Its a 1.8TB in size and had only one single partition. Now I can see 3 partitions sde1, sde2 and sde2 of sizes 130M, 140GB and 10GB. Is there any way to recover data from these newly created disk devices? Thanks Paras.

9 34

5.7 x86_64 DVD iso
by Weiner, Michael 29 Sep '11

29 Sep '11

I am trying to find a DVD iso that is not a torrent, and looking through the mirrors I am unable to find one. Does anyone happen to have a mirror or repository that they know of that carries the DVD iso for direct download? I am behind a pretty strict firewall and am unable to do torrents. Thanks in advance Michael Weiner =================================== Please consider the environment before printing this e-mail Cleveland Clinic is ranked one of the top hospitals in America by U.S.News & World Report (2010). Visit us online at http://www.clevelandclinic.org for a complete listing of our services, staff and locations. Confidentiality Note: This message is intended for use only by the individual or entity to which it is addressed and may contain information that is privileged, confidential, and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. Thank you.

7 10

CentOS-announce Digest, Vol 79, Issue 10
by centos-announce-request＠centos.org 29 Sep '11

29 Sep '11

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2011:1341 Critical CentOS 5 i386 firefox Update (Johnny Hughes) 2. CESA-2011:1341 Critical CentOS 5 x86_64 firefox Update (Johnny Hughes) 3. CESA-2011:1343 Critical CentOS 5 i386 thunderbird Update (Johnny Hughes) 4. CESA-2011:1343 Critical CentOS 5 x86_64 thunderbird Update (Johnny Hughes) 5. CEEA-2011:1345 CentOS 5 x86_64 openldap Update (Johnny Hughes) 6. CEEA-2011:1345 CentOS 5 i386 openldap Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 29 Sep 2011 03:54:30 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2011:1341 Critical CentOS 5 i386 firefox Update To: centos-announce(a)centos.org Message-ID: <20110929035430.GA6942(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2011:1341 Critical Upstream details at : http://rhn.redhat.com/errata/RHSA-2011-1341.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: 5dae95d6ce62de4d245ad634b899d56e firefox-3.6.23-2.el5.centos.i386.rpm 5b6e501c8621dbec7fe4227d8cf7203e xulrunner-1.9.2.23-1.el5_7.i386.rpm b4ac1d4bd797dd1da02296d4e7615345 xulrunner-devel-1.9.2.23-1.el5_7.i386.rpm Source: 607cdb48738c9f547b35fb80ddedeb60 firefox-3.6.23-2.el5.centos.src.rpm d4f5f9fa6aca4a006c17c3b15fca51fd xulrunner-1.9.2.23-1.el5_7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Thu, 29 Sep 2011 03:54:31 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2011:1341 Critical CentOS 5 x86_64 firefox Update To: centos-announce(a)centos.org Message-ID: <20110929035431.GA6958(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2011:1341 Critical Upstream details at : http://rhn.redhat.com/errata/RHSA-2011-1341.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: 5dae95d6ce62de4d245ad634b899d56e firefox-3.6.23-2.el5.centos.i386.rpm 9eb03996efe95755402d2e115ae9d38c firefox-3.6.23-2.el5.centos.x86_64.rpm 5b6e501c8621dbec7fe4227d8cf7203e xulrunner-1.9.2.23-1.el5_7.i386.rpm e724c7b5559182f771dfb2baaecae658 xulrunner-1.9.2.23-1.el5_7.x86_64.rpm b4ac1d4bd797dd1da02296d4e7615345 xulrunner-devel-1.9.2.23-1.el5_7.i386.rpm cd662869a05cd184f713e1c4fa4dc58c xulrunner-devel-1.9.2.23-1.el5_7.x86_64.rpm Source: 607cdb48738c9f547b35fb80ddedeb60 firefox-3.6.23-2.el5.centos.src.rpm d4f5f9fa6aca4a006c17c3b15fca51fd xulrunner-1.9.2.23-1.el5_7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Thu, 29 Sep 2011 04:34:00 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2011:1343 Critical CentOS 5 i386 thunderbird Update To: centos-announce(a)centos.org Message-ID: <20110929043400.GA9763(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2011:1343 Critical Upstream details at : http://rhn.redhat.com/errata/RHSA-2011-1343.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: cb55b2f841e048189488a90861729f4c thunderbird-2.0.0.24-26.el5.centos.i386.rpm Source: b9a631707641d84283eb20e9ac872caf thunderbird-2.0.0.24-26.el5.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Thu, 29 Sep 2011 04:34:00 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2011:1343 Critical CentOS 5 x86_64 thunderbird Update To: centos-announce(a)centos.org Message-ID: <20110929043400.GA9780(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2011:1343 Critical Upstream details at : http://rhn.redhat.com/errata/RHSA-2011-1343.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: 37be11bf79a58f8f2003c85b6a24e996 thunderbird-2.0.0.24-26.el5.centos.x86_64.rpm Source: b9a631707641d84283eb20e9ac872caf thunderbird-2.0.0.24-26.el5.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Thu, 29 Sep 2011 14:55:59 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEEA-2011:1345 CentOS 5 x86_64 openldap Update To: centos-announce(a)centos.org Message-ID: <20110929145559.GA7022(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2011:1345 Upstream details at : https://rhn.redhat.com/errata/RHEA-2011-1345.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: e64cca127bbb4fcf22ff6463117eab57 compat-openldap-2.3.43_2.2.29-12.el5_7.9.i386.rpm 58e5b3e51e20806547aa73fa7204ab9e compat-openldap-2.3.43_2.2.29-12.el5_7.9.x86_64.rpm 9c83aa8b9265cda78223b12a78ca0078 openldap-2.3.43-12.el5_7.9.i386.rpm a0f897e668fd4cfb4334681e988bdc53 openldap-2.3.43-12.el5_7.9.x86_64.rpm e6fd687d433ff74f707e224dee47d86a openldap-clients-2.3.43-12.el5_7.9.x86_64.rpm 6edcfaf89c7f250be0a043a9047d00a4 openldap-devel-2.3.43-12.el5_7.9.i386.rpm 3ec857d25d95d2e418dec463617f896e openldap-devel-2.3.43-12.el5_7.9.x86_64.rpm 09995e0d631ce4f7a4244696eaef2671 openldap-servers-2.3.43-12.el5_7.9.x86_64.rpm 3d177da7553463ad8aa14ed950ac670e openldap-servers-overlays-2.3.43-12.el5_7.9.x86_64.rpm 7ef8bbacd9e05b9b773d4cba4573cff6 openldap-servers-sql-2.3.43-12.el5_7.9.x86_64.rpm Source: 261e46fdbb87df98f3f51296581a9caf openldap-2.3.43-12.el5_7.9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 6 Date: Thu, 29 Sep 2011 14:55:59 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEEA-2011:1345 CentOS 5 i386 openldap Update To: centos-announce(a)centos.org Message-ID: <20110929145559.GA7006(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2011:1345 Upstream details at : https://rhn.redhat.com/errata/RHEA-2011-1345.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: e64cca127bbb4fcf22ff6463117eab57 compat-openldap-2.3.43_2.2.29-12.el5_7.9.i386.rpm 9c83aa8b9265cda78223b12a78ca0078 openldap-2.3.43-12.el5_7.9.i386.rpm e17187d3ab9395b2ee149457260c0418 openldap-clients-2.3.43-12.el5_7.9.i386.rpm 6edcfaf89c7f250be0a043a9047d00a4 openldap-devel-2.3.43-12.el5_7.9.i386.rpm 1492f29d1a4bff21464694671102cc42 openldap-servers-2.3.43-12.el5_7.9.i386.rpm 98126b6f1c17098d4e830740515406f5 openldap-servers-overlays-2.3.43-12.el5_7.9.i386.rpm 6defffc175c3b1e0c045610d3fd05f61 openldap-servers-sql-2.3.43-12.el5_7.9.i386.rpm Source: 261e46fdbb87df98f3f51296581a9caf openldap-2.3.43-12.el5_7.9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 79, Issue 10 ***********************************************

1 0

is there a way to make the kernel see a new ethernet device without rebooting?
by Jon Detert 29 Sep '11

29 Sep '11

I have a VMWare ESX server with virtual machines running CentOS. I want to add an ethernet interface to one of the CentOS virtual machines. VMWare allowed me to add a virtual NIC to the CentOS virtual machine while it was running. However, the CentOS o.s. cannot see the new NIC. Is there a command I can run to make the kernel aware of the new ethernet device? I don't want to reboot the CentOS o.s. if I don't have to Thanks, JD

3 4

CentOS 6: corosync and pacemaker won't stop (patch)
by Florian Crouzat 29 Sep '11

29 Sep '11

Hi, I cannot 'halt' my CentOS 6 servers while running corosync+pacemaker. I believe the runlevels used to stop corosync and pacemaker are not in the correct order and create the infinite "Waiting for corosync services to unload..." loop thing. This is my first time with this cluster technology but apparently pacemaker has to be stopped /before/ corosync. Applying the following patch to pacemaker init script fix this issue. # diff -Nu /etc/init.d/pacemaker{.orig,} --- /etc/init.d/pacemaker.orig 2011-09-27 14:08:32.984117731 +0200 +++ /etc/init.d/pacemaker 2011-09-27 14:08:56.125143439 +0200 @@ -6,7 +6,7 @@ # # License: Revised BSD -# chkconfig: - 90 90 +# chkconfig: - 90 75 # description: Pacemaker Cluster Manager # processname: pacemaker # Florian

1 1

CentOS 6.0: iptables stacktrace with named chains > 28 chars
by Florian CROUZAT 29 Sep '11

29 Sep '11

Hi, I'm not sure where to ask this question, you, redhat or netfilter so I'll ask you guys first, hoping you can redirect me where this post belongs. I have an issue with my CentOS 6 box with named chains in iptables. Apparently there is a builtin #define to limit chain names up to 30 chars, but the test condition fails and iptables crashes with a stacktrace. # cat /etc/redhat-release CentOS Linux release 6.0 (Final) # rpm -qa | fgrep iptables iptables-ipv6-1.4.7-3.el6.x86_64 iptables-1.4.7-3.el6.x86_64 Use cases prove that you can create chains with names up to =30 chars but you can only reference <=28 chars named chains. Trying to reference a 29 or 30 chars named chains will crash iptables. ===== Use cases with 28,29,30 and 31 chars long named chains: # iptables -N $(for((i=0;i<28;i++));do printf "%s" "a";done) && echo ok || echo ko ok # iptables -N $(for((i=0;i<29;i++));do printf "%s" "b";done) && echo ok || echo ko ok # iptables -N $(for((i=0;i<30;i++));do printf "%s" "c";done) && echo ok || echo ko ok iptables -N $(for((i=0;i<31;i++));do printf "%s" "d";done) && echo ok || echo ko iptables v1.4.7: chain name `ddddddddddddddddddddddddddddddd' too long (must be under 30 chars) Try `iptables -h' or 'iptables --help' for more information. ko # iptables -I INPUT -j aaaaaaaaaaaaaaaaaaaaaaaaaaaa && echo ok || echo ko ok # iptables -I INPUT -j bbbbbbbbbbbbbbbbbbbbbbbbbbbbb && echo ok || echo ko <stacktrace> ko # iptables -I INPUT -j cccccccccccccccccccccccccccccc && echo ok || echo ko <stacktrace> ko I can attach strace output or the stacktrace if required. Any infos where to report this issue much appreciated. Florian.

1 1

Finding i/o bottleneck
by Nicolas Ross 28 Sep '11

28 Sep '11

Hi list ! We have a very busy webserver hosted in a clustered environment where the document root and data is on a GFS2 partition off a fiber-attached disk array. Now on busy moments, I can see in htop, nmon that there is a fair percentage of cpu that is waiting for I/O. In nmon, I can spot that the most busy block device correspond to our gfs2 partition where many times, it shows that it's 100% busy and is read all along. Now, I want to know what files are being waited for. With lsof I can get a listing of open files, but it doesn't gives me if a file is just opended in ram or if it's being waited for... What tools besides lsof, nmon, htop, atop can help me find that info ? I am under RHEL/CentOS 6.1. Thanks

6 14

Slow DNS lookups on CentOS6
by Alfred von Campe 28 Sep '11

28 Sep '11

Most of my desktops are still running CentOS5, but I have installed CentOS6 on a few of them. The users on those desktops are reporting that DNS lookups are slow, and from my brief tests, that does appear to be the case. After some googling, I found a suggestion to disable IPv6, but that didn't help. So I tried to figure out where the delay occurs using strace and ltrace, but that didn't help much. When running ltrace, the process I'm trying to trace (host, nslookup) just dies. And the output of strace does show a 3+ second delay, but I can't figure out what it's telling me: 10:46:25.317517 futex(0xd1ba94, FUTEX_WAKE_PRIVATE, 2147483647) = 0 10:46:25.317586 open("/usr/lib/locale/locale-archive", O_RDONLY|O_LARGEFILE) = 6 10:46:25.317635 fstat64(6, {st_mode=S_IFREG|0644, st_size=99158720, ...}) = 0 10:46:25.317702 mmap2(NULL, 2097152, PROT_READ, MAP_PRIVATE, 6, 0) = 0xb569d000 10:46:25.317754 mmap2(NULL, 1171456, PROT_READ, MAP_PRIVATE, 6, 0x19c) = 0xb557f000 10:46:25.317792 mmap2(NULL, 4096, PROT_READ, MAP_PRIVATE, 6, 0x1084) = 0xb557e000 10:46:25.317827 close(6) = 0 10:46:25.317904 futex(0xb76a5050, FUTEX_WAKE_OP_PRIVATE, 1, 1, 0xb76a504c, {FUTEX_OP_SET, 0, FUTEX_OP_CMP_GT, 10:46:25.317990 futex(0xb76a5018, FUTEX_WAKE_PRIVATE, 1) = 1 10:46:25.318037 rt_sigaction(SIGHUP, {0x141390, ~[RTMIN RT_1], 0}, NULL, 8) = 0 10:46:25.318145 rt_sigsuspend([]) = ? ERESTARTNOHAND (To be restarted) 10:46:28.510794 --- SIGTERM (Terminated) @ 0 (0) --- 10:46:28.510842 sigreturn() = ? (mask now [HUP INT TERM]) 10:46:28.510926 futex(0xb76a5050, FUTEX_WAKE_OP_PRIVATE, 1, 1, 0xb76a504c, {FUTEX_OP_SET, 0, FUTEX_OP_CMP_GT, 10:46:28.511015 futex(0xb76a5018, FUTEX_WAKE_PRIVATE, 1) = 1 10:46:28.511070 futex(0xb76a5050, FUTEX_CMP_REQUEUE_PRIVATE, 1, 2147483647, 0xb76a5018, 18) = 1 10:46:28.511144 futex(0xb76a5018, FUTEX_WAKE_PRIVATE, 1) = 1 10:46:28.511256 futex(0xb769fbd8, FUTEX_WAIT, 2371, NULL) = -1 EAGAIN (Resource temporarily unavailable) 10:46:28.511316 brk(0x920a000) = 0x920a000 The CentOS5 systems on the same network with the same /etc/resolv.conf file do not have these delays. Has anyone else seen this or have some suggestions as to how to debug this? Alfred

7 11

centos 6 console screen
by Jerry Geis 28 Sep '11

28 Sep '11

How do I get the centos 6 console screen out of high-res mode? I tried a couple things of adding to the grub.conf file vga=ask and vga=769. Neither had any effect. I did not get prompted to ask for what mode or anything.... Whats the correct way to have centos 6 drop into normal old vga text mode and not high res small character hard to read mode. Thanks, Jerry

2 1

KVM update
by Johan Martinez 28 Sep '11

28 Sep '11

I am planning to update KVM packages kvm and kvm-qemu-img on a system. Do I need to shutdown running VMs before updating these packages? Does it require any services restart after the update? Any idea? thanks jM

2 1

kickstart: gfx vs. txt mode
by Jure Pečar 28 Sep '11

28 Sep '11

Hello, I seem to recall from my redhat5/6/7 days that certain installation methods used for kickstarting only invoked text mode install. Now I read that graphical install is default in kickstart on el5/6. However, in my test environment (with older HP DL140G3) I only get text mode install up, even if I specify graphical in kickstart file, with both nfs and http install methods. There's no clues on third console, only an info message about display mode being set to 't'. Any clues what am I missing? -- Jure Pečar http://jure.pecar.org http://f5j.eu

4 7

[OT] Fetchmail and Mutt help
by Todd 28 Sep '11

28 Sep '11

Hi All, I setup Fetchmail and wanted to use Mutt to read e-mail. I used to use Pine and I just am sick of GUI e-mail clients these days. Bloat, complication and unreliable. Pine was my first ever e-mail client. I prefer to use POP still as I want may mail on my machine at all times. I can go into mutt and execute: 'fetchmail -v' and watch it bring down my e-mail. But in mutt i dont see anything. I dont see an inbox. no messages. nada. I set my mail to /Users/jtsm/.mail and if I go to that location I dont see anything there. Can anyone help me get setup? Also, can anyone point me how to make mutt look like this: http://linsec.ca/File:Muttscreen.jpg interms of the columns? IIRC there use to be a patch but that was so long ago I dont know if it even applies anymore. I am reading the Wiki, but who knew Mutt was so extensive... -Todd

5 7

Please remove the formation about RAQport it is incorrect
by Alex Bajan 28 Sep '11

28 Sep '11

Please remove the formation about RAQport it is incorrect http://lists.centos.org/pipermail/centos/2007-September/043643.html Alex Lech Bajan Principal RAQport Inc. 2004 North Monroe Street Arlington Virginia 22207 703-528-0114 voice 703-652-0993 voice 2 800-695-6200 toll free sales(a)raqport.com http://raqport.com

6 7

CentOS-6 by PXEboot?
by Timothy Murphy 27 Sep '11

27 Sep '11

Has anyone succeeded in installing CentOS-6.0 by PXEboot. If so, would you say how you did it, please. I tried (on an HP MicroServer), but gave up in the end and used a USB stick installation instead. But I'd be very interested to know how to do it, for the future. Unfortunately I didn't keep a proper note of my PXEboot attempt, but IIRC the problem was that install.img was not found, although I had links to it in several places. -- Timothy Murphy e-mail: gayleard /at/ eircom.net tel: +353-86-2336090, +353-1-2842366 s-mail: School of Mathematics, Trinity College, Dublin 2, Ireland

5 9

problem in cr: nfs-utils-lib-1.1.5-3.el6.x86_64
by Paul Heinlein 27 Sep '11

27 Sep '11

I ran yum update on a CentOS 6.0 machine against the CR repository and noticed that the nfs-utils-lib update broke my rcp.idmap settings: rpc.idmapd: libnfsidmap: processing 'Method' list rpc.idmapd: libnfsidmap: Unable to get init function: /usr/lib64/libnfsidmap/umich_ldap.so: undefined symbol: libnfsidmap_plugin_init rpc.idmapd: libnfsidmap: requested translation method, 'umich_ldap', is not available rpc.idmapd: Unable to create name to user id mappings. The /usr/lib64/libnfsidmap/umich_ldap.so library included with the 1.1.5-3.el6 update is noticably smaller than the one included in the standard 6.0 package, v. 1.1.5-1.el6. The rpm checks out correctly via gpg and an rpm2cpio->cpio pipe. Running ldd against the updated library shows the expected links. But the library appears to not work. Anyone else seen this? -- Paul Heinlein <> heinlein(a)madboa.com <> http://www.madboa.com/

2 1

CentOS-announce Digest, Vol 79, Issue 9
by centos-announce-request＠centos.org 27 Sep '11

27 Sep '11

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2011:1337 CentOS 5 x86_64 cman Update (Johnny Hughes) 2. CEBA-2011:1337 CentOS 5 i386 cman Update (Johnny Hughes) 3. CentOS-6.0 Continuous Release i386 and x86_64 (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Mon, 26 Sep 2011 17:43:06 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2011:1337 CentOS 5 x86_64 cman Update To: centos-announce(a)centos.org Message-ID: <20110926174306.GA32107(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2011:1337 Upstream details at : https://rhn.redhat.com/errata/RHBA-2011-1337.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: ceecb32e1cece8b76f41b4fef1a17bb7 cman-2.0.115-85.el5_7.2.x86_64.rpm eadb7e2a5f3b4080658dbdc9ce938821 cman-devel-2.0.115-85.el5_7.2.i386.rpm 1b65896b6559581b4cf9eddf02024178 cman-devel-2.0.115-85.el5_7.2.x86_64.rpm Source: 1dff1a8ef073b3e86d097062ca990ed4 cman-2.0.115-85.el5_7.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Mon, 26 Sep 2011 17:43:06 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2011:1337 CentOS 5 i386 cman Update To: centos-announce(a)centos.org Message-ID: <20110926174306.GA32092(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2011:1337 Upstream details at : https://rhn.redhat.com/errata/RHBA-2011-1337.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: c9b1ca0296e01026caf441c8be9e44e0 cman-2.0.115-85.el5_7.2.i386.rpm eadb7e2a5f3b4080658dbdc9ce938821 cman-devel-2.0.115-85.el5_7.2.i386.rpm Source: 1dff1a8ef073b3e86d097062ca990ed4 cman-2.0.115-85.el5_7.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Tue, 27 Sep 2011 01:03:59 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CentOS-6.0 Continuous Release i386 and x86_64 To: centos-announce(a)centos.org Message-ID: <20110927010359.GA23207(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii The CentOS-6.0 Continuous Release ( CR ) repository is now available on mirror.centos.org. This repository contains rpms to be included in the next CentOS-6.x release ( 6.1 ). Because these include security and bugfix updates, we strongly recommend everyone using CentOS-6 install and update their system using this repository. --------------------- Download and Install: The centos-release-cr-6.x rpms are available in the Extras repository. You can either run: 'yum install centos-release-cr', and follow yum's prompt or download the rpms directly, install them using rpm and then use yum to run the system updates. i386: http://mirror.centos.org/centos/6/extras/i386/RPMS/centos-release-cr-6-0.el… ( sha256: 9fc78d2d79abeb1513f0851d075a2860f5039fc8db3fb0db4c660252fffda894 ) x86_64: http://mirror.centos.org/centos/6/extras/x86_64/RPMS/centos-release-cr-6-0.… ( sha256: bd55e1505caae2f78c306290d235b7f54833fcad5a9f1942b3cb54e28f7bfe73 ) Notes: - All rpms in the CR repo are signed with the main distro key. - While the existing CR repo has most of the updates, we aim to have completed all updates in the next 2 to 3 days time. - All updates released since 6.0, will be added to the 6.0/cr/ repository. This includes bugfix and enhancement updates released as a part of 6.1 - Once 6.1 is released, the 6.0/cr/ repositories will be removed ( they will not be available on vault.centos.org ) - Once 6.1 is released, the migration from 6.0 to 6.1 will remain seemless for people running with the CR repository. There will be no manual work needed on the machine. - Baseurl for the CR repo is set to only use centos.org internal machines, this is to reduce the amount of time we need to spend in seeding and then managing external mirrors. - All contents in the CR repo will be announced into a separate announcement list; once 6.1 is released the announcements will be re-sent to the centos-announce list. - Additional notes are available at : http://wiki.centos.org/AdditionalResources/Repositories/CR Comments and feedback are always welcome. Enjoy! -- Karanbir Singh The CentOS Project irc: z00dax, #centos at irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 79, Issue 9 **********************************************

1 0

RTL8111/8168B always 100mbps
by Muhammad Panji 27 Sep '11

27 Sep '11

Dear All, I have an onboard Realtek RTL8111/8168B NIC. from lspci -vv : 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) It is detected, but why the speed is always 100Mbps, already change cable but still no luck. I use ethtool and from the output it seems that system know that this NIC support gigabit speed : Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full have change the driver r8169 with r8168 and follow the guide on CentOS wiki http://wiki.centos.org/AdditionalResources/HardwareList/RealTekRTL8111b but still it only get 100Mbps speed. I user kernel 2.6.18-274.3.1.el5 and 2.6.18-274.3.1.el5-PAE. on another machine with the same specs I use kernel 2.6.18-238.9.1.el5 and the gigabit speed works. Any idea why this happened and how to solve it? Thank you. Regards, -- ----- Muhammad Panji http://www.panji.web.id http://www.kurungsiku.com http://sumodirjo.wordpress.com http://www.kurungsiku.web.id http://www.linuxbox.web.id

7 12

Rsync CR repo for CentOS 6? was [CentOS-announce] CentOS-6.0 Continuous Release i386 and x86_64
by Mathieu Baudier 27 Sep '11

27 Sep '11

> - Baseurl for the CR repo is set to only use centos.org internal > machines, this is to reduce the amount of time we need to spend in > seeding and then managing external mirrors. Is it possible to synchronize locally the CR repo? We usually synchronize all repositories in our internal network via the third-party mirrors, but since the CR repo won't be available there, it would be nice to be able to rsync directly from centos.org (and it would remove some load on it)

2 1

Hard I/O lockup with EL6
by Benjamin Smith 27 Sep '11

27 Sep '11

I'm trying to figure out why 2 machines have a "hard I/O lock" on the HDD when running EL6. I have 4 identical machines, all were stable with EL5. 2 work great with EL6, 2 do not. I've checked momtherboard BIOS versions and settings, SAS controller BIOS versions and settings, they are the same between the working and non- working systems. When booting a non-working system, it boots straight up to the boot prompt (runlevel 3) without issue, and everything works fine. When the machine sits idle for a period of time (ranging from 15 minutes or so and up) the HDD becomes unreadable/unwritable and the system is useless for any purpose and must be hard restarted with a full power cycle - it won't even shut down. Since nothing is logged, I've had precious little information to diagnose with. After several attempts to find out what's going on, I find the following emitted to the screen: mpt2sas0: diag reset: FAILED mpt2sas0: diag reset: FAILED mpt2sas0: diag reset: FAILED end_request: I/O error, dev sda, sector 226972349 Buffer I/O error, device sda5, logical block 2719747 sd 0:0:0:0rejecting I/O to offline device sd 0:0:0:0rejecting I/O to offline device sd 0:0:0:0rejecting I/O to offline device This is NOT due to a faulty HDD: I've tried new hard disks, SATA/SAS, I've swapped hard disks with an identical working unit and verified that the working unit remains working and the failing unit continues to fail. I've reformatted and re-installed EL6 numerous times with consistent results. Googling this error returned very little useful information: where should I go now? Below, please find outputs of dmesg and lspci. I've compared outputs of dmesg between working and nonworking systems, the output of anything with "mpt" at the beginning is identical except for different IRQ ports. Dump of dmesg: Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32-71.29.1.el6.x86_64 (mockbuild(a)c6b5.bsys.dev.centos.org) (gcc version 4.4.4 20100726 (Red Hat 4.4.4-13) (GCC) ) #1 SMP Mon Jun 27 19:49:27 BST 2011 Command line: ro root=UUID=3653eebb-f6b7-4e90-8365-26f4eccaa960 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us crashkernel=auto rhgb quiet acpi=off KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bf7d0000 (usable) BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved) BIOS-e820: 00000000bf7ed000 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed40000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 0000000100000000 - 0000000440000000 (usable) DMI present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x440000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DFFFF uncachable E0000-E3FFF write-protect E4000-E7FFF write-through E8000-EBFFF write-protect EC000-EFFFF write-through F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask C00000000 write-back 1 base 400000000 mask FC0000000 write-back 2 base 0C0000000 mask FC0000000 uncachable 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 original variable MTRRs reg 0, base: 0GB, range: 16GB, type WB reg 1, base: 16GB, range: 1GB, type WB reg 2, base: 3GB, range: 1GB, type UC total RAM covered: 16384M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 64K num_reg: 5 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2GB, range: 1GB, type WB reg 2, base: 4GB, range: 4GB, type WB reg 3, base: 8GB, range: 8GB, type WB reg 4, base: 16GB, range: 1GB, type WB e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xbf7d0 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000bf7d0000 0000000000 - 00bf600000 page 2M 00bf600000 - 00bf7d0000 page 4k kernel direct mapping tables up to bf7d0000 @ 10000-15000 init_memory_mapping: 0000000100000000-0000000440000000 0100000000 - 0440000000 page 2M kernel direct mapping tables up to 440000000 @ 13000-25000 RAMDISK: 37515000 - 37fefb62 No NUMA configuration found Faking a node at 0000000000000000-0000000440000000 Bootmem setup node 0 0000000000000000-0000000440000000 NODE_DATA [0000000000020000 - 0000000000053fff] bootmap [0000000000100000 - 0000000000187fff] pages 88 (8 early reservations) ==> bootmem [0000000000 - 0440000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0001ca0ff8] TEXT DATA BSS ==> [0001000000 - 0001ca0ff8] #3 [0037515000 - 0037fefb62] RAMDISK ==> [0037515000 - 0037fefb62] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] #5 [0001ca1000 - 0001ca121b] BRK ==> [0001ca1000 - 0001ca121b] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] #7 [0000013000 - 0000020000] PGTABLE ==> [0000013000 - 0000020000] found SMP MP-table at [ffff8800000ff780] ff780 Reserving 129MB of memory at 32MB for crashkernel (System RAM: 17408MB) [ffffea0000000000-ffffea000edfffff] PMD -> [ffff880028600000-ffff8800365fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00440000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009d 0: 0x00000100 -> 0x000bf7d0 0: 0x00100000 -> 0x00440000 On node 0 totalpages: 4192093 DMA zone: 56 pages used for memmap DMA zone: 117 pages reserved DMA zone: 3808 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 765960 pages, LIFO batch:31 Normal zone: 46592 pages used for memmap Normal zone: 3361280 pages, LIFO batch:31 SFI: Simple Firmware Interface v0.7 http://simplefirmware.org Intel MultiProcessor Specification v1.4 MPTABLE: OEM ID: INTEL MPTABLE: Product ID: FOXHOLLOW MPTABLE: APIC at: 0xFEE00000 Processor #0 (Bootup-CPU) Processor #2 Processor #4 Processor #6 I/O APIC #1 Version 32 at 0xFEC00000. Processors: 4 SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009d000 - 000000000009e000 PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 00000000bf7d0000 - 00000000bf7e0000 PM: Registered nosave memory: 00000000bf7e0000 - 00000000bf7ed000 PM: Registered nosave memory: 00000000bf7ed000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fed20000 PM: Registered nosave memory: 00000000fed20000 - 00000000fed40000 PM: Registered nosave memory: 00000000fed40000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 0000000100000000 Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) Booting paravirtualized kernel on bare hardware NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 31 pages/cpu @ffff880028200000 s95064 r8192 d23720 u524288 pcpu-alloc: s95064 r8192 d23720 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4131048 Policy zone: Normal Kernel command line: ro root=UUID=3653eebb-f6b7-4e90-8365-26f4eccaa960 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb- sun16 KEYBOARDTYPE=pc KEYTABLE=us crashkernel=129M@0M rhgb quiet acpi=off PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found AMD-Vi disabled by default: pass amd_iommu=on to enable PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 Memory: 16315744k/17825792k available (4939k kernel code, 1057420k absent, 452628k reserved, 3931k data, 1220k init) Hierarchical RCU implementation. NR_IRQS:33024 nr_irqs:440 Console: colour VGA+ 80x25 console [tty0] enabled allocated 167772160 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Fast TSC calibration using PIT Detected 2666.323 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5332.64 BogoMIPS (lpj=2666323) pid_max: default: 32768 minimum: 301 Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 9 MCE banks CPU0: Thermal monitoring enabled (TM1) using mwait in idle threads. Performance Events: PEBS fmt1+, Nehalem events, Intel PMU driver. ... version: 3 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 000000070000000f ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 20293 entries in 80 pages Setting APIC routing to flat ExtINT not setup in hardware but reported by MP table alloc irq_desc for 16 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 17 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 18 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 19 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 21 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 23 on node 0 alloc kstat_irqs on node 0 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 CPU0: Intel(R) Xeon(R) CPU X3450 @ 2.67GHz stepping 05 Booting Node 0, Processors #1 #2 #3 Ok. Brought up 4 CPUs Total of 4 processors activated (21328.27 BogoMIPS). Testing NMI watchdog ... OK. sizeof(vma)=200 bytes sizeof(page)=56 bytes sizeof(inode)=592 bytes sizeof(dentry)=192 bytes sizeof(ext3inode)=800 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=2600 bytes devtmpfs: initialized regulator: core version 0.5 NET: Registered protocol family 16 PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: Interpreter disabled. vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:1a.0: reg 10 32bit mmio: [0xfb3fc000-0xfb3fc3ff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold pci 0000:00:1a.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 10 32bit mmio: [0xfb3fa000-0xfb3fa3ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: PME# disabled pci 0000:00:1f.2: reg 10 io port: [0xbc00-0xbc07] pci 0000:00:1f.2: reg 14 io port: [0xb880-0xb883] pci 0000:00:1f.2: reg 18 io port: [0xb800-0xb807] pci 0000:00:1f.2: reg 1c io port: [0xb480-0xb483] pci 0000:00:1f.2: reg 20 io port: [0xb400-0xb40f] pci 0000:00:1f.2: reg 24 io port: [0xb080-0xb08f] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfb3f8000-0xfb3f80ff] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] pci 0000:00:1f.5: reg 10 io port: [0xac00-0xac07] pci 0000:00:1f.5: reg 14 io port: [0xa880-0xa883] pci 0000:00:1f.5: reg 18 io port: [0xa800-0xa807] pci 0000:00:1f.5: reg 1c io port: [0xa480-0xa483] pci 0000:00:1f.5: reg 20 io port: [0xa400-0xa40f] pci 0000:00:1f.5: reg 24 io port: [0xa080-0xa08f] pci 0000:02:00.0: reg 10 io port: [0xc000-0xc0ff] pci 0000:02:00.0: reg 14 64bit mmio: [0xfb43c000-0xfb43ffff] pci 0000:02:00.0: reg 1c 64bit mmio: [0xfb440000-0xfb47ffff] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfb480000-0xfb4fffff] pci 0000:02:00.0: supports D1 D2 pci 0000:00:05.0: bridge io port: [0xc000-0xcfff] pci 0000:00:05.0: bridge 32bit mmio: [0xfb400000-0xfb4fffff] pci 0000:04:00.0: reg 10 32bit mmio: [0xfb5e0000-0xfb5fffff] pci 0000:04:00.0: reg 18 io port: [0xdc00-0xdc1f] pci 0000:04:00.0: reg 1c 32bit mmio: [0xfb5dc000-0xfb5dffff] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff] pci 0000:00:1c.4: bridge 32bit mmio: [0xfb500000-0xfb5fffff] pci 0000:05:00.0: reg 10 32bit mmio: [0xfb6e0000-0xfb6fffff] pci 0000:05:00.0: reg 18 io port: [0xec00-0xec1f] pci 0000:05:00.0: reg 1c 32bit mmio: [0xfb6dc000-0xfb6dffff] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:00:1c.5: bridge io port: [0xe000-0xefff] pci 0000:00:1c.5: bridge 32bit mmio: [0xfb600000-0xfb6fffff] pci 0000:06:03.0: reg 10 32bit mmio pref: [0xfa000000-0xfaffffff] pci 0000:06:03.0: reg 14 32bit mmio: [0xfb7fc000-0xfb7fffff] pci 0000:06:03.0: reg 18 32bit mmio: [0xfb800000-0xfbffffff] pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0xfb700000-0xfbffffff] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfa000000-0xfaffffff] vgaarb: device added: PCI:0000:06:03.0,decodes=io+mem,owns=io+mem,locks=none pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:3b14] PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64 PCI: pci_cache_line_size set to 64 bytes NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Switching to clocksource tsc pnp: PnP ACPI: disabled pci 0000:00:03.0: PCI bridge to [bus 01-01] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01 pci 0000:00:03.0: bridge window [io disabled] pci 0000:00:03.0: bridge window [mem disabled] pci 0000:00:03.0: bridge window [mem pref disabled] pci 0000:00:05.0: PCI bridge to [bus 02-02] pci 0000:00:05.0: PCI bridge, secondary bus 0000:02 pci 0000:00:05.0: bridge window [0xc000-0xcfff] pci 0000:00:05.0: bridge window [0xfb400000-0xfb4fffff] pci 0000:00:05.0: bridge window [mem pref disabled] pci 0000:00:1c.0: PCI bridge to [bus 03-03] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.0: bridge window [0x1000-0x1fff] pci 0000:00:1c.0: bridge window [0xc0000000-0xc01fffff] pci 0000:00:1c.0: bridge window [0xc0200000-0xc03fffff] pci 0000:00:1c.4: PCI bridge to [bus 04-04] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.4: bridge window [0xd000-0xdfff] pci 0000:00:1c.4: bridge window [0xfb500000-0xfb5fffff] pci 0000:00:1c.4: bridge window [0xc0400000-0xc05fffff] pci 0000:00:1c.5: PCI bridge to [bus 05-05] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.5: bridge window [0xe000-0xefff] pci 0000:00:1c.5: bridge window [0xfb600000-0xfb6fffff] pci 0000:00:1c.5: bridge window [0xc0600000-0xc07fffff] pci 0000:00:1e.0: PCI bridge to [bus 06-06] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 pci 0000:00:1e.0: bridge window [io disabled] pci 0000:00:1e.0: bridge window [0xfb700000-0xfbffffff] pci 0000:00:1e.0: bridge window [0xfa000000-0xfaffffff] pci 0000:00:03.0: PCI->APIC IRQ transform: INT A -> IRQ 16 pci 0000:00:03.0: setting latency timer to 64 pci 0000:00:05.0: PCI->APIC IRQ transform: INT A -> IRQ 16 pci 0000:00:05.0: setting latency timer to 64 pci 0000:00:1c.0: enabling device (0104 -> 0107) pci 0000:00:1c.0: PCI->APIC IRQ transform: INT A -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.4: PCI->APIC IRQ transform: INT A -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1c.5: PCI->APIC IRQ transform: INT B -> IRQ 16 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff] pci_bus 0000:02: resource 1 mem: [0xfb400000-0xfb4fffff] pci_bus 0000:03: resource 0 io: [0x1000-0x1fff] pci_bus 0000:03: resource 1 mem: [0xc0000000-0xc01fffff] pci_bus 0000:03: resource 2 pref mem [0xc0200000-0xc03fffff] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff] pci_bus 0000:04: resource 1 mem: [0xfb500000-0xfb5fffff] pci_bus 0000:04: resource 2 pref mem [0xc0400000-0xc05fffff] pci_bus 0000:05: resource 0 io: [0xe000-0xefff] pci_bus 0000:05: resource 1 mem: [0xfb600000-0xfb6fffff] pci_bus 0000:05: resource 2 pref mem [0xc0600000-0xc07fffff] pci_bus 0000:06: resource 1 mem: [0xfb700000-0xfbffffff] pci_bus 0000:06: resource 2 pref mem [0xfa000000-0xfaffffff] pci_bus 0000:06: resource 3 io: [0x00-0xffff] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:06:03.0: Boot video device Trying to unpack rootfs image as initramfs... Freeing initrd memory: 11114k freed platform rtc_cmos: registered platform RTC device (no PNP device found) audit: initializing netlink socket (disabled) type=2000 audit(1317063573.647:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 31888 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) ksign: Installing public key data Loading keyring - Added public key 965331713A640F69 - User ID: CentOS (Kernel Module GPG key) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) alloc irq_desc for 24 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:03.0: irq 24 for MSI/MSI-X pcieport 0000:00:03.0: setting latency timer to 64 alloc irq_desc for 25 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:05.0: irq 25 for MSI/MSI-X pcieport 0000:00:05.0: setting latency timer to 64 alloc irq_desc for 26 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.0: irq 26 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 27 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.4: irq 27 for MSI/MSI-X pcieport 0000:00:1c.4: setting latency timer to 64 alloc irq_desc for 28 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.5: irq 28 for MSI/MSI-X pcieport 0000:00:1c.5: setting latency timer to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 pci-stub: invalid id string "" Non-volatile memory driver v1.3 Linux agpgart interface v0.103 crash memory driver: version 1.0 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A serial8250: ttyS2 at I/O 0x3e8 (irq = 5) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input0 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.0: PCI->APIC IRQ transform: INT A -> IRQ 21 ehci_hcd 0000:00:1a.0: setting latency timer to 64 ehci_hcd 0000:00:1a.0: EHCI Host Controller ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.0: debug port 2 ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported ehci_hcd 0000:00:1a.0: irq 21, io mem 0xfb3fc000 ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32-71.29.1.el6.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ehci_hcd 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23 ehci_hcd 0000:00:1d.0: setting latency timer to 64 ehci_hcd 0000:00:1d.0: EHCI Host Controller ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.0: debug port 2 ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfb3fa000 ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32-71.29.1.el6.x86_64 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day, 114 bytes nvram cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 rtc_cmos rtc_cmos: setting system clock to 2011-09-26 18:59:34 UTC (1317063574) Initalizing network drop monitor service Freeing unused kernel memory: 1220k freed Write protecting the kernel read-only data: 7184k dracut: dracut-004-33.2.el6_0 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm- devel(a)redhat.com udev: starting version 147 dracut: Starting plymouth daemon mpt2sas version 05.100.00.02 loaded scsi0 : Fusion MPT SAS Host mpt2sas 0000:02:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16 mpt2sas 0000:02:00.0: setting latency timer to 64 mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (16328080 kB) alloc irq_desc for 29 on node -1 alloc kstat_irqs on node -1 mpt2sas 0000:02:00.0: irq 29 for MSI/MSI-X mpt2sas0: PCI-MSI-X enabled: IRQ 29 mpt2sas0: iomem(0x00000000fb43c000), mapped(0xffffc900025c8000), size(16384) mpt2sas0: ioport(0x000000000000c000), size(256) mpt2sas0: sending diag reset !! usb 1-1: new high speed USB device using ehci_hcd and address 2 usb 1-1: New USB device found, idVendor=8087, idProduct=0020 usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 6 ports detected usb 2-1: new high speed USB device using ehci_hcd and address 2 usb 2-1: New USB device found, idVendor=8087, idProduct=0020 usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 2-1: configuration #1 chosen from 1 choice hub 2-1:1.0: USB hub found hub 2-1:1.0: 6 ports detected usb 1-1.2: new full speed USB device using ehci_hcd and address 3 usb 1-1.2: New USB device found, idVendor=0557, idProduct=2221 usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.2: Product: Hermon USB hidmouse Device usb 1-1.2: Manufacturer: Winbond Electronics Corp usb 1-1.2: configuration #1 chosen from 1 choice input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1 generic-usb 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.2/input0 input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input2 generic-usb 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.2/input1 usb 1-1.3: new high speed USB device using ehci_hcd and address 4 usb 1-1.3: New USB device found, idVendor=05e3, idProduct=0719 usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=2 usb 1-1.3: Product: USB Storage usb 1-1.3: SerialNumber: 000000000033 usb 1-1.3: configuration #1 chosen from 1 choice usb 2-1.2: new low speed USB device using ehci_hcd and address 3 usb 2-1.2: New USB device found, idVendor=046d, idProduct=c31c usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1.2: Product: USB Keyboard usb 2-1.2: Manufacturer: Logitech usb 2-1.2: configuration #1 chosen from 1 choice input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input3 generic-usb 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.0-1.2/input0 input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input4 generic-usb 0003:046D:C31C.0004: input,hidraw3: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.0-1.2/input1 usb 2-1.3: new high speed USB device using ehci_hcd and address 4 mpt2sas0: diag reset: SUCCESS usb 2-1.3: New USB device found, idVendor=0930, idProduct=653d usb 2-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=3 usb 2-1.3: Product: USB Flash Memory usb 2-1.3: SerialNumber: 0EF0F56022A2B8C4 usb 2-1.3: configuration #1 chosen from 1 choice mpt2sas0: Allocated physical memory: size(839 kB) mpt2sas0: Current Controller Queue Depth(339), Max Controller Queue Depth(2799) mpt2sas0: Scatter Gather Elements per IO(128) mpt2sas0: LSISAS2008: FWVersion(04.00.00.00), ChipRevision(0x02), BiosVersion(07.03.00.00) mpt2sas0: Protocol=(Initiator,Target), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ) mpt2sas0: sending port enable !! mpt2sas0: host_add: handle(0x0001), sas_addr(0x50030480004a14c0), phys(8) mpt2sas0: port enable: SUCCESS scsi 0:0:0:0: Direct-Access SEAGATE ST3300657SS 0006 PQ: 0 ANSI: 5 scsi 0:0:0:0: SSP: handle(0x0009), sas_addr(0x5000c50023bdb4b9), device_name(0x00c50050b8b4bd23) scsi 0:0:0:0: SSP: enclosure_logical_id(0x50030480004a14c0), slot(0) scsi 0:0:0:0: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(6), cmd_que(1) ata_piix 0000:00:1f.2: version 2.13 ata_piix 0000:00:1f.2: PCI->APIC IRQ transform: INT B -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi1 : ata_piix scsi2 : ata_piix ata1: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 19 ata2: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 19 ata_piix 0000:00:1f.5: PCI->APIC IRQ transform: INT B -> IRQ 19 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.5: setting latency timer to 64 scsi3 : ata_piix scsi4 : ata_piix ata3: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 19 ata4: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 19 ata4: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata2.00: SATA link down (SStatus 0 SControl 300) ata2.01: SATA link down (SStatus 0 SControl 300) ata1.00: SATA link down (SStatus 0 SControl 300) ata1.01: SATA link down (SStatus 0 SControl 300) Initializing USB Mass Storage driver... scsi5 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning scsi6 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. sd 0:0:0:0: [sda] 585937500 512-byte logical blocks: (300 GB/279 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: bb 00 10 08 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > sd 0:0:0:0: [sda] Attached SCSI disk EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. dracut: Mounted root filesystem /dev/sda3 dracut: Loading SELinux policy type=1404 audit(1317063586.147:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 SELinux: 2048 avtab hash slots, 200977 rules. SELinux: 2048 avtab hash slots, 200977 rules. SELinux: 9 users, 13 roles, 3327 types, 173 bools, 1 sens, 1024 cats SELinux: 77 classes, 200977 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev sda3, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1317063586.463:3): policy loaded auid=4294967295 ses=4294967295 dracut: dracut: Switching root udev: starting version 147 sd 0:0:0:0: Attached scsi generic sg0 type 0 e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-NAPI e1000e: Copyright(c) 1999 - 2011 Intel Corporation. e1000e 0000:04:00.0: Disabling ASPM L0s e1000e 0000:04:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16 e1000e 0000:04:00.0: setting latency timer to 64 alloc irq_desc for 30 on node -1 alloc kstat_irqs on node -1 e1000e 0000:04:00.0: irq 30 for MSI/MSI-X alloc irq_desc for 31 on node -1 alloc kstat_irqs on node -1 e1000e 0000:04:00.0: irq 31 for MSI/MSI-X e1000e 0000:04:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:00:64:b0 e1000e 0000:04:00.0: eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:04:00.0: eth0: MAC: 4, PHY: 8, PBA No: 0101FF-0FF e1000e 0000:05:00.0: Disabling ASPM L0s e1000e 0000:05:00.0: PCI->APIC IRQ transform: INT A -> IRQ 17 e1000e 0000:05:00.0: setting latency timer to 64 alloc irq_desc for 32 on node -1 alloc kstat_irqs on node -1 e1000e 0000:05:00.0: irq 32 for MSI/MSI-X alloc irq_desc for 33 on node -1 alloc kstat_irqs on node -1 e1000e 0000:05:00.0: irq 33 for MSI/MSI-X e1000e 0000:05:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:00:64:b1 e1000e 0000:05:00.0: eth1: Intel(R) PRO/1000 Network Connection e1000e 0000:05:00.0: eth1: MAC: 4, PHY: 8, PBA No: 0101FF-0FF iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a 3420 TCO device (Version=2, TCOBASE=0x0860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) i801_smbus 0000:00:1f.3: PCI->APIC IRQ transform: INT C -> IRQ 18 usb-storage: device scan complete usb-storage: device scan complete scsi 6:0:0:0: Direct-Access USB Flash Memory 5.00 PQ: 0 ANSI: 0 CCS scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GT20L DQ02 PQ: 0 ANSI: 0 sd 6:0:0:0: Attached scsi generic sg1 type 0 scsi 5:0:0:0: Attached scsi generic sg2 type 5 EXT3 FS on sda3, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda1, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda7, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda2, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda5, type ext3), uses xattr Adding 10241396k swap on /dev/sda6. Priority:-1 extents:1 across:10241396k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions sd 6:0:0:0: [sdb] 2013184 512-byte logical blocks: (1.03 GB/983 MiB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 sd 6:0:0:0: [sdb] Assuming drive cache: write through sd 6:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sd 6:0:0:0: [sdb] Assuming drive cache: write through sd 6:0:0:0: [sdb] Attached SCSI removable disk ip6_tables: (C) 2000-2006 Netfilter Core Team sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 5:0:0:0: Attached scsi CD-ROM sr0 nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team ADDRCONF(NETDEV_UP): eth1: link is not ready e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx e1000e 0000:05:00.0: eth1: 10/100 speed: disabling TSO ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready eth1: no IPv6 routers present SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts Output of lspci 00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11) 00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11) 00:05.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 3 (rev 11) 00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11) 00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11) 00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11) 00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11) 00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11) 00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation 3400 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 05) 02:00.0 Serial Attached SCSI controller: LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 02) 04:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection 05:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection 06:03.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200eW WPCM450 (rev 0a) -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

7 12

Hacking Issue
by Jennifer Botten 27 Sep '11

27 Sep '11

Hi, I am having an issue with someone accessing our server via a SIP/VOIP connection. I have changed my iptables rules to drop all UDP traffic from and too this IP address, but this traffic seems to still run through my server. These are the iptables rules that I current have on the server. -A INPUT -i eth0 -s 209.61.231.42 -p udp -j DROP -A INPUT -i eth0 -d 209.61.231.42 -p udp -j DROP Regards Jennifer Botten ETECH

6 8

Video capture on CentOS (6)
by Mathieu Baudier 27 Sep '11

27 Sep '11

Hello, I need to do some analog video capture and I was wondering what is the status of this in CentOS 6. The last information I could find was here (obviously for CentOS 5): http://lists.centos.org/pipermail/centos/2009-September/082521.html Could anybody recommend a not-too-expensive video capture cards (PCI, USB, fireWire, ...) which would be well supported (drivers easily available in base, ElRepo, or not too complicated to build). Thanks in advance! Mathieu

2 4

Perl module installed via CPAN but its is not found
by TE Dukes 27 Sep '11

27 Sep '11

Hello, I am trying to rebuild a zoneminder rpm. It calls for the module perl(Sys::Mmap). I installed via CPAN but when I run rpmbuild --rebuild zoneminder-xxxxxx, it tells me the above module is needed. Seems I ran into this once before and fixed it, but I can't remember what I did. I have searched for two days now and can't find anything of help. TIA Eddie PS If I can get this zoneminder rpm to rebuild, I will post the location for d/l. It is zoneminder 1.24.4

2 3

x86_64.rpm v. i686.rpm
by TE Dukes 26 Sep '11

26 Sep '11

Just curious why there are two types of rpms for some packages. Just got my first 64 bit machine. Which should I be installing? Both? TIA Eddie

2 1

Sort logfiles on common lines?
by Dotan Cohen 26 Sep '11

26 Sep '11

I have a huge mysql.log file full of errors. I'd like to sort it by the most common line, and work from there. I did go through the manpage for sort, and googled a bit, but I found nothing relevant. Here is an example of the output: [root@ log]# tail mysqld.log 110925 11:05:35 [ERROR] /usr/libexec/mysqld: Incorrect key file for table './ox_data_summary_ad_hourly.MYI'; try to repair it 110925 11:05:35 [ERROR] /usr/libexec/mysqld: Incorrect key file for table './ox_data_summary_ad_hourly.MYI'; try to repair it 110925 12:05:28 [ERROR] /usr/libexec/mysqld: Incorrect key file for table './ox_data_intermediate_ad.MYI'; try to repair it 110925 12:05:28 [ERROR] /usr/libexec/mysqld: Incorrect key file for table './ox_data_intermediate_ad.MYI'; try to repair it 110925 12:05:28 [ERROR] /usr/libexec/mysqld: Incorrect key file for table './ox_data_intermediate_ad.MYI'; try to repair it 110925 12:05:28 [ERROR] /usr/libexec/mysqld: Incorrect key file for table './ox_data_summary_ad_hourly.MYI'; try to repair it 110925 13:09:43 [ERROR] /usr/libexec/mysqld: Incorrect key file for table './ox_data_intermediate_ad.MYI'; try to repair it 110925 13:09:43 [ERROR] /usr/libexec/mysqld: Incorrect key file for table './ox_data_intermediate_ad.MYI'; try to repair it 110925 13:09:43 [ERROR] /usr/libexec/mysqld: Incorrect key file for table './ox_data_intermediate_ad.MYI'; try to repair it 110925 13:09:43 [ERROR] /usr/libexec/mysqld: Incorrect key file for table './ox_data_summary_ad_hourly.MYI'; try to repair it [root@ log]# wc -l mysqld.log 20686 mysqld.log [root@ log]# cat mysqld.log | grep ERROR | wc -l 20332 [root@ log]# Is there a way to get the most common (unique) lines of the file? By the way, I'm not sure if this is RHEL or CentOS, or which version: [root@ log]# uname -a Linux example.com 2.6.18-194.32.1.el5xen #1 SMP Wed Jan 5 18:44:24 EST 2011 x86_64 x86_64 x86_64 GNU/Linux [root@ log]# uname -o GNU/Linux [root@ log]# I assume that it is one of these, as Yum is installed. How would I find out? Thanks! -- Dotan Cohen http://gibberish.co.il http://what-is-what.com

4 8

Files being modified in /bin/
by Micky L Martin 26 Sep '11

26 Sep '11

For the binary experts. I have a situation here. Something hideously but continuously is modifying the /bin/ executables as common as coreutils and net-tools. I can verify that from md5sum. First thing I checked was 'ls' and it has a checksum mismatch. So I removed it and reinstalled it. Then I moved the file somewhere else to cross bisect it. I did a hexdump on original ls file and the modified file, and there was some 700 lines of hex code additional in the modified file. Then I set a cron to check and do md5sum on all system files and after half an hour, I go a report back. Files modified. This time when checked the hex dump of newly and earlier modified files, they were the same. Exact same! Because rpm and rpmverify also seemed to have been modified so I cannot trust 'rpm -V' package verification. Already did lsof and process tracing but to no avail. Does anyone have any idea how to find that culprit? -Micky.

5 8

Firewalling outbound connections...
by John Doe 26 Sep '11

26 Sep '11

Hi, would anyone know a soft to firewall outbound connections (applications phoning home, etc...). It would detect an unknown (to him) app that tries to connect to the outside world and it would popup a allow/deny request...AppArmor might be a bit overkill... Anyone have any experience with Systrace, TuxGuardian or Zorp GPL...? Thx, JD

2 1

External Dial-up Modem
by Graham Johnston 26 Sep '11

26 Sep '11

I am having an issue with Centos 6 and an external USRobotics modem. We use the modem as part of a last resort SMS paging system. Across multiple Dell servers, different models, I can't not get the modem to respond to simple AT commands while using Minicom. At the same time if I connect the server to a console port on a switch I can successfully access the switches serial console. So I know the serial port itself is working. The modem still works fine if connected to a Centos 5 server. Any thoughts? Graham Johnston Network Planner Westman Communications Group 204.717.2829 johnstong(a)westmancom.com <mailto:johnstong@westmancom.com> P think green; don't print this email.

4 4

this is strange and dark
by fakessh 26 Sep '11

26 Sep '11

hello admin This is strange and dark: it receives more than one hundred updates and deposits are still not updated are welcome ... -- http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x092164A7 gpg --keyserver pgp.mit.edu --recv-key 092164A7 http://urlshort.eu fakessh @

7 6

This doesn't make sense
by Thomas Dukes 26 Sep '11

26 Sep '11

Just got my Lenovo TS130 with a Xeon E3-1225 Processor, 4GB RAM, blah, blah, blah...... It won't boot CentOS 6.0 64 bit, Scientific Linux 64 bit 6.1, but will boot 32 bit CentOS 6.0. Any ideas? Otherwise, its going back to Amazon Monday and I'm done. Will keep my 5.7 Centos boxes until they rot! TIA

25 62

Not receiving root mail
by Anne Wilson 26 Sep '11

26 Sep '11

Although I have the alias defined in /etc/aliases and /etc/postfix/aliases, I'm not receiving root mail. Following the previous thread about unreceived logwatch mail, I tested with a manual run of logwatch, and found that my ISP is rejecting the mail because it is seeing an envelope carrying my local address. My suspicion is that the mail is going out via sendmail instead of postfix-sendmail. IIRC there used to be system-switch-mail or a similarly named package. I can't find any such package - and can't remember which file it edited. Can someone please point me to that file? Anne -- New to KDE Software? - get help from http://userbase.kde.org

18 36

SSH in and my terminal keystrokes are weird.......
by Todd 26 Sep '11

26 Sep '11

Hi All, I upgraded to OS X 10.7 on my laptop and when I try to ssh into my servers and do edits it seems my backspace is now weird. When I backspace it skips all around, inserts what looks to be special characters, etc. If I save and go back in the file edited right, but due to all the inserted garbage and skipping around of the cursor I cant tell at that time if what I did worked. I dont recall this happening on Snow Leopard at all, but we did also upgrade to CentOS 6 and I honestly have no idea where this issue would be. Can anyone provide any thoughts? Todd

4 6

disk partitioning: 6.0 install to harddrive using liveCD
by centos＠trodman.com 26 Sep '11

26 Sep '11

Greetings: I'm planning to set up a test Centos 6.0 box (has CDROM, but no DVD) with these partions: / 10GB ( no separate mount for /usr ) /tmp 1GB /var 10GB /boot 500MB The centos mirrors I have seen do not provide the full distro on CD (this box has no DVD). I'm used to having about 6 CD isos to work with. The livecd install to hard drive works, but apparently does not support custom partitioning (correct me if I'm wrong). What do you suggest I do to get the partitioning I want? I'm leaning towards: booting into single user mode, back up /var to tar file, delete /var, create a new partion for /var and /tmp, update /etc/fstab, mount /var and /tmp, restore /var from tar backup. Is the best way? I have no investment in the current install, so I can start from scratch. -- thanks/regards, Tom

4 3

Hello from RAQport Please remove this post
by Alex Bajan 26 Sep '11

26 Sep '11

Dear Centos, We did never receive the Server back from Australia And this forum is not to post incorrect disputes information from the users regarding some other companies. Link below http://lists.centos.org/pipermail/centos/2007-September/043643.html Sincerely Alex Lech Bajan Principal RAQport Inc. 2004 North Monroe Street Arlington Virginia 22207 703-528-0114 voice 703-652-0993 voice 2 800-695-6200 toll free sales(a)raqport.com http://raqport.com Providing solutions with Centos, Proxmox, OpenVZ, BlueQuartz, and BlueOnyx. We ship worldwide, or can provide colocation in our Arlington VA Datacenter We can migrate your old worn out Cobalt RaQ 3/4/550/Qube systems to BlueQuartz or BlueOnyx running on Proxmox VE or OpenVZ. Please let us know if you have any questions?

4 3

ssh reverse DNS failure
by Timothy Murphy 26 Sep '11

26 Sep '11

I use dyndns's (free) service to access a remote machine with a dynamic IP address. The machine is running under CentOS-6.0. I can ssh into the address given me by dyndns (*.homelinux.com), but when I do this I get the warning "reverse mapping checking getaddrinfo for" * "failed - POSSIBLE BREAK-IN ATTEMPT!" This doesn't really matter, as I normally use OpenVPN for accessing this site - the dyndns method is a safety precaution in case openvpn doesn't work. But I'm wondering if it is possible to stop the warning? I've tried various recipes google gave me, eg adding "UseDNS no" to /etc/ssh/sshd_config on the remote machine (and re-starting sshd), but none of them has worked, -- Timothy Murphy e-mail: gayleard /at/ eircom.net tel: +353-86-2336090, +353-1-2842366 s-mail: School of Mathematics, Trinity College, Dublin 2, Ireland

2 1

Ekiga - camera
by Johan Vermeulen 26 Sep '11

26 Sep '11

dear All, when first installing CentOs some 6 months ago, I noticed this strange thing called Ekiga. Now, some guys at work use Skype and I heard that's owned by Microsoft. So enter James. I bought a webcam, actualy 2, to test Ekiga. Logitech Webcam c210. I saw this url :http://www.ideasonboard.org/uvc/ on this url :http://wiki.centos.org/AdditionalResources/HardwareList/Webcams and in short : I think I have the driver i need --V4L2-- on my Centos6 machine. To make sure, I installed everything that came up under # yum search V4L2 with epel testing enabled. #dmesg | tail -n15 shows : usb 2-3: new high speed USB device using ehci_hcd and address 12 usb 2-3: New USB device found, idVendor=046d, idProduct=0819 usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=2 usb 2-3: SerialNumber: CE6AA1D0 usb 2-3: configuration #1 chosen from 1 choice uvcvideo: Found UVC 1.00 device<unnamed> (046d:0819) input: UVC Camera (046d:0819) as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.0/input/input13 still in Ekiga i get error message ( translated from Dutch) : an error occurred with video device UVC Camera (046d:0819) an error occurred when opening the device blahblahbla check access rights or driver. under System - Preferences I can't find anything configurable ( is that even English ?) Can anyone help me configure something somewhere or whatever is needed ? Thanks a million in advance James Opensource Software is the future. -- Johan Vermeulen IT-medewerker Caw De Kempen johan.vermeulen(a)cawdekempen.be 0479.82.01.41 Opensource Software is the future.

11 18

OKI B411 printer
by Bob Tennent 26 Sep '11

26 Sep '11

On a Centos-5.7 system, this printer works fine using a parallel cable but fails using the USB interface; the following appears on the CUPS page when I try to print a page: Unable to open device "hal:///org/freedesktop/Hal/devices/usb_device_6bc_268_AK11044671_if0_printer_no serial": Permission denied" Any suggestions? On a Fedora 14 system, the USB interface works, so it's not the printer. I've also tried another USB jack. Bob T.

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss