Discuss

discuss@lists.centos.org

34753 discussions

Quick question regarding qoutas
by Joseph L. Casale 05 Oct '09

05 Oct '09

If I export a mount with a quota via Samba, do the downstream win clients realize the drive size equal to the quota, or actual mount size? Working remotely while installing, I could test but it would save me time to know beforehand:) Thanks guys! jlc

1 0

CentOS 5.3 LDAP problem.
by Benjamin Donnachie 05 Oct '09

05 Oct '09

I currently have about eight servers running a mixture of CentOS x86_64 v5.2 and v5.3 but none with the very latest updates. They all obtain their authentication information over LDAP and to avoid the starting message bus hang problem[1], nscd is set to soft failure. However, yesterday I set up a new CentOS v5.3 server with the latest updates, but it refuses to get beyond "Starting message bus" if I have ldap as an option in nsswitch.conf. The LDAP server is hosted on two separate machines and this machine has an identical set up to the others - including soft failure in the nscd config. If I remove all references to ldap from nsswitch.conf I can get the machine to boot. I can then add those entries back, start nscd and getent works fine. However, when I start samba it then starts to fail stating that it cannot find a users unix account - which is clearly incorrect! To compound matters, ssh now seems to be locking up; freezing after requesting a password and eventually dropping connection. As I am working off-site for the test of the week I cannot post any further information at the moment, however, I think that the installed kernel had a September 2009 compile date. Does anyone know of any reason why the latest updates could be causing this behaviour? I have been unable to find anything relevant in the list archives or in the forums. I am under pressure to get this server working and I don't want to be forced to install Windows, so any advice would be appreciated. Many thanks, Ben [1] http://bugs.centos.org/view.php?id=2047

4 8

Build a Firewall (Can I learn to do this...)
by ML 05 Oct '09

05 Oct '09

Hi All, I have a home business circuit and I am gearing up to host my business affairs in my place. I have Comcast and 13 static IP's. I have an extra PIII 1U, 2 9gb SCSI, 1gb RAMm dual NICS. So I am wanting to build a firewall to front end my traffic. Assign one of my statics to it and have Comcast statically route my traffic to this IP. Then when traffic comes have it decide if it is allowed or not and if allowed pass it to the right server based upon the rules. I used to work with PIX 525's so I have knowledge, I just dont quite know how to do this with CentOS and such. Can anyone offer advice? Best, -Jason

11 11

Slightly OT: Vim command (or macro) to replace space under cursor by "  " (without deleting the following word)
by Niki Kovacs 05 Oct '09

05 Oct '09

Hi, I'm using Vim to edit some static XHTML pages. I have to (manually) check for non-breakable spaces in my text, and eventually replace simple spaces by the following character sequence:   Usually, when I perform the same operation over and over in a text, I do it once, and then repeat it in command mode using [.]. But I can't figure out how to do this here. Here's what the according macro would look like. Pressing F2 would replace the space under the cursor by " " : :map <F2> cw <ESC> ... except this also deletes the word after the cursor, which is annoying. Any suggestions ? Cheers, Niki

3 3

test
by Janez Kosmrlj 05 Oct '09

05 Oct '09

testing mail delivery

2 1

[Slightly OT] Data Preservation
by ML 05 Oct '09

05 Oct '09

HI All, So I have 5 1U servers (running Windows) that have Ultra 320 SCSI Drives in them. The owner of these boxes wants the drives captured in their current states to .iso or .cdr or something where if the need arises the data can be viewed, used again, etc. So what is the best approach? Boot from a Live CD, hook up a USB external HD and do what? Can I create a .iso or .cdr (or some other portable format) and have it created on the external USB? Thoughts on this process would be appreciated. -ML

6 7

Can't get forwarding to work
by Neil Aggarwal 05 Oct '09

05 Oct '09

Hello all: I am having trouble getting port forwarding with iptables to work. I have this configuration: Internet --- Linux machine --- Windows machine The windows machine is set up to listen on IP address 10.0.0.31 I am able to use lynx to connect to http://10.0.0.31 on the linux machine so there is no problem going from the linux machine to the windows machine. I have tied a public IP address a.b.c.d to the linux machine and entered these rules in its firewall: /sbin/ifconfig eth0:1 $WIN_EXTERNAL_IP netmask $ETH0_NETMASK broadcast $ETH0_BCAST /sbin/iptables -t nat -A PREROUTING -p tcp -i eth0 -d $WIN_EXTERNAL_IP --dport 80 -j DNAT --to $WIN_INTERNAL_IP:80 /sbin/iptables -A FORWARD -p tcp -i eth0 -d $WIN_INTERNAL_IP --dport 80 -j ACCEPT I have this log entry at the bottom of the firewall rules: /sbin/iptables -A FORWARD -j LOG --log-prefix "FORWARD " When I try to go to the external IP address http://a.b.c.d from another network, I get an error. Any ideas? Thanks, Neil -- Neil Aggarwal, (281)846-8957, www.JAMMConsulting.com Will your e-commerce site go offline if you have a DB server failure, fiber cut, flood, fire, or other disaster? If so, ask about our geographically redundant database system.

3 7

problem with installing centos 5.3 on sata ahci
by Maciej Jan Broniarz 04 Oct '09

04 Oct '09

Hello, I am trying to install Centos on sata ahci. The installer first waits few minutes while loading ahci module. Then, the installer cannot detect any disk during the partitioning phase. What might be the problem? I have switched to IDE in bios and it still is the same. Best regards, mjb

2 1

Testing and using a microphone
by Niki Kovacs 04 Oct '09

04 Oct '09

Hi, What's the most simple way to check if my microphone works on a plain CentOS 5.3 desktop? Is there a simple way, for example, to record voice into a simple .wav file? Niki

7 9

NFS lockups
by Mike Yates 04 Oct '09

04 Oct '09

I thought this had been fixed with newer kernels? We have an old Maxtor Snap Server, an 80 GB NAS unit, containing some of our archives. Both of our CentOS servers have it permanently mounted by NFS for convenient access. This weekend, I discovered remotely that, although all systems except the VRTSralus remote agents for Veritas (now Symantec) Backup Exec were working just fine, both servers would freeze a shell solid on starting to run "lsof" or half way through a "df". However, "mount" ran OK and showed the next item in the "df" should have been the Snap Server NFS mount. I pinged it and it did not respond - I'll let you know Monday what is up. "umount -f" showed "Device busy" but "umount -l" worked just fine and "df" "lsof" and "VRTSralus" all work OK now. BTW the Veritas does not access the Snap Server, though the weekly cron-job to tar-ball the Snap Server at 02:00 Saturday did not email me at all, though it is shown in /var/log/cron. Does anyone know of a method to make NFS mounts auto un-mount if the remote server disappears? Mike Yates MBCS CITP (ISSG) IT Support Engineer Hawkgrove Ltd - Software Systems Design 2, The Business Courtyard, Marl Pits Lane, Trudoxhill, Frome, Somerset, BA11 5DL, UK +44 (0)1373 837900 fax: +44 (0)8700 518155 Registered in England: 2756481 VAT Reg: UK 601 1137 11 Registered Office: NSO Associates LLP, 75 Springfield Road, Chelmsford, Essex CM2 6JB All e-mail is subject to contract and is not intended to create a legally binding agreement. Hawkgrove Ltd will only be bound by an agreement in writing signed by an authorized signatory. All outgoing email is scanned by Kerio, using ClamAV 0.94.2/9865/Sat Oct 3 03:45:19 2009 Known viruses: 625330.

2 1

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss