Discuss

discuss@lists.centos.org

34753 discussions

OT: dmidecode data - what is maximum RAM capacity of this box?
by Lanny Marcus 01 Oct '09

01 Oct '09

In Timo's thread about RAM today, I noticed dmidecode and I got the data for my Dell Dimension 2400 (Celeron CPU) box, which is below. I won this box in a raffle, during February 2005. After I got the box, I got conflicting information, from Crucial.com and from Dell Latin America, regarding the maximum RAM configuration. To be conservative, I bought two 256 MB DIMMS from Crucial.com, early in 2005. Running dmidecode, I got the below information. Questions: (a) Is the maximum capacity of this motherboard 1 GB instead of the 512 MB I thought it was? (b) Is it possible the mainboard capacity is 1 GB, but that the BIOS limits to 512 MB? To add further confusion, I just searched for this model on crucial.com and they are showing 2 GB total capacity. However, they do not allow one to select between the Celeron CPU which I have and a non Celeron CPU and they may have different capacity. TIA! Lanny dmidecode for Dell Dimension 2400 Celeron box Handle 0x1000, DMI type 16, 15 bytes. Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 1 GB Error Information Handle: Not Provided Number Of Devices: 2 Handle 0x1100, DMI type 17, 23 bytes. Memory Device Array Handle: 0x1000 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 256 MB Form Factor: DIMM Set: None Locator: DIMM_1 Bank Locator: Not Specified Type: SDRAM Type Detail: Synchronous Speed: 266 MHz (3.8 ns) Handle 0x1101, DMI type 17, 23 bytes. Memory Device Array Handle: 0x1000 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 256 MB Form Factor: DIMM Set: None Locator: DIMM_2 Bank Locator: Not Specified Type: SDRAM Type Detail: Synchronous Speed: 266 MHz (3.8 ns) Handle 0x1301, DMI type 19, 15 bytes. Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0001FFFFFFF Range Size: 512 MB Physical Array Handle: 0x1000 Partition Width: 0 Handle 0x1402, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0000FFFFFFF Range Size: 256 MB Physical Device Handle: 0x1100 Memory Array Mapped Address Handle: 0x1301 Partition Row Position: 1 Handle 0x1403, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00010000000 Ending Address: 0x0001FFFFFFF Range Size: 256 MB Physical Device Handle: 0x1101 Memory Array Mapped Address Handle: 0x1301 Partition Row Position: 1 from Crucial.com Q: How much memory can my computer handle? from Crucial.com A: 2048MB.

2 3

vncviewer and IPv6
by Robert Moskowitz 01 Oct '09

01 Oct '09

I have a host that I have been accessing with vncviewer via its fqdn that had only an IPv4 A record. I just added a AAAA IPv6 record, and vncviewer via fqdn stopped working. But worked when I provided the IPv4 address instead. It LOOKS like vncviewer is trying the IPv6 address, eventhough all documentation indicates that it does not support IPv6. Definitely my server is only listening on the IPv4 interface. SSH has a nice -4 option to force using IPv4; there is no similar option for vncviewer. Does anyone have any idea on how to enforce IPv4 usage for IPv6-dead vncviewer? Yes, I DO want IPv6 on this server....

1 0

Any known problems with kernel-2.6.18-164.el5.x86_64 / x86_64 / 3ware?
by mbneto 01 Oct '09

01 Oct '09

Hi, I have a server that is running centos 5.3 x86_64 that until last week was running fine. With no error messages in console and in /var/log/messages the server simply stops responding. After a reboot everything is fine. The only change (that I could find) but that was not active before the first incident/reboot was the update of the kernel and friends. The server (is this can help) is a intel quad core, 8GB RAM , 3 x 1TB disks (raid mirror with 2 active / 1 spare via 3ware controller) Any known problem with the kernel-2.6.18-164.el5.x86_64? (I am assuming that this would be the only thing that could cause the problem due to the lack of other messages. Regards. yum.log Sep 24 12:13:48 Updated: openssl-0.9.8e-12.el5.x86_64 Sep 24 12:13:49 Updated: mysql-5.0.77-3.el5.x86_64 Sep 24 12:13:49 Updated: nspr-4.7.5-1.el5_4.x86_64 Sep 24 12:13:49 Updated: openssl-0.9.8e-12.el5.i686 Sep 24 12:13:49 Installed: libXrender-0.9.1-3.1.i386 Sep 24 12:13:49 Installed: freetype-2.2.1-21.el5_3.i386 Sep 24 12:13:51 Installed: fontconfig-2.4.1-7.el5.i386 Sep 24 12:13:52 Updated: mysql-5.0.77-3.el5.i386 Sep 24 12:13:52 Installed: libjpeg-6b-37.i386 Sep 24 12:13:52 Installed: 2:libpng-1.2.10-7.1.el5_3.2.i386 Sep 24 12:13:52 Updated: openssh-4.3p2-36.el5.x86_64 Sep 24 12:13:52 Updated: gnutls-1.4.1-3.el5_3.5.x86_64 Sep 24 12:13:52 Installed: keyutils-1.2-1.el5.x86_64 Sep 24 12:13:52 Installed: cairo-1.2.4-5.el5.i386 Sep 24 12:13:52 Installed: libtiff-3.8.2-7.el5_3.4.i386 Sep 24 12:13:53 Installed: atk-1.12.2-1.fc6.i386 Sep 24 12:13:53 Installed: libXfixes-4.0.1-2.1.i386 Sep 24 12:13:53 Updated: lftp-3.7.11-4.el5.x86_64 Sep 24 12:13:53 Installed: trousers-0.3.1-4.el5.x86_64 Sep 24 12:13:53 Updated: ecryptfs-utils-75-5.el5.x86_64 Sep 24 12:13:53 Installed: libXcursor-1.1.7-1.1.i386 Sep 24 12:13:53 Installed: libXft-2.1.10-1.1.i386 Sep 24 12:13:53 Installed: pango-1.14.9-5.el5.centos.i386 Sep 24 12:13:53 Installed: libXrandr-1.1.1-3.1.i386 Sep 24 12:13:54 Updated: nspr-4.7.5-1.el5_4.i386 Sep 24 12:13:54 Installed: libXinerama-1.0.1-2.1.i386 Sep 24 12:13:54 Installed: gnutls-1.4.1-3.el5_3.5.i386 Sep 24 12:13:54 Updated: openssh-clients-4.3p2-36.el5.x86_64 Sep 24 12:13:54 Updated: openssh-server-4.3p2-36.el5.x86_64 Sep 24 12:13:55 Updated: mysql-server-5.0.77-3.el5.x86_64 Sep 24 12:13:56 Updated: 1:nfs-utils-1.0.9-42.el5.x86_64 Sep 24 12:13:56 Updated: dnsmasq-2.45-1.1.el5_3.x86_64 Sep 24 12:13:57 Updated: openssl-devel-0.9.8e-12.el5.x86_64 Sep 24 12:13:57 Updated: mysql-devel-5.0.77-3.el5.x86_64 Sep 24 12:13:57 Updated: mysql-devel-5.0.77-3.el5.i386 Sep 24 12:14:04 Installed: kernel-2.6.18-164.el5.x86_64 Sep 24 12:14:04 Updated: kernel-headers-2.6.18-164.el5.x86_64 Sep 24 12:14:04 Installed: 1:cups-libs-1.3.7-8.el5_3.6.i386 Sep 24 12:14:05 Installed: gtk2-2.10.4-20.el5.i386 Sep 24 12:14:05 Installed: trousers-0.3.1-4.el5.i386 Sep 24 12:14:05 Updated: ecryptfs-utils-75-5.el5.i386

3 4

Re: [CentOS] Asterisk and VOIP was Re: CentOS for non-tech user
by Les Bell 01 Oct '09

01 Oct '09

Chan Chung Hang Christopher <christopher.chan(a)bradbury.edu.hk> wrote: >> Ah, well, if you want to keep the landlines, then yeah, I guess asterisk is the way to go. If your goal is to replace keyline systems, then asterisk definitely has that kind of support which, it appears, even Cisco's solution does not (from the mouth of Datacraft Asia personnel selling the school Cisco's voip solution). << I replaced our PBX with an Asterisk box and Snom VoIP phones for just this reason. All calls are made over POTS lines, although I did have it working over IAX2 with FreeWorldDialup back when they offered a free service. The functionality is significantly better than the old PBX, with a menu system to connect callers to the right extension during business hours, conferencing, voicemail with forwarding by email, etc. I have an OpenVPN connection from my desktop machine at the university where I work back to my home office LAN and can use a softphone to answer my home phone while at the office, etc. Quite neat. I've even programmed it to fetch the area weather forecast and read it out when you dial one extension. This has been much more useful than I expected - when I get sales calls from people I really don't want to deal with, I just say, "Please hold the line - I'm going to transfer you to the right person" and then transfer the call to the weather forecast. The sales person now gets what sounds like Stephen Hawking reading them the weather. Easily the best use for Asterisk ever. My setup is running on Centos 4.8 and has been a breeze to maintain. Nothing is exposed to the outside world, so I haven't felt pressured to apply updates, etc. However, I did do a little experimenting and found that it's remarkably easy to record calls using Cain+Abel to conduct an ARP cache poisoning attack between any phone and the Asterisk server. The only defences against this are to implement SRTP (Secure Real-Time Protocol), but last time I looked, this required SIP over TCP, which Asterisk did not support (not to mention having to set up a PKI and issue certs to the phones), or the much simpler control of ensuring that all phones are on a separate VLAN from the computers. For any reasonable-sized setup this isn't too hard to achieve as you may well want to buy a PoE switch to power the phones (wall warts are a PITA). There's also an excellent publication on VoIP in the NIST 800-series Special Publications, which is worth looking at. Best, --- Les Bell [http://www.lesbell.com.au] Tel: +61 2 9451 1144

1 0

ignore please.
by Brian McKerr 01 Oct '09

01 Oct '09

testing email delivery

1 0

SATA cards?
by ML 01 Oct '09

01 Oct '09

Hi All, I have a server that is IDE drives and I dont have any so I wanted to put in a sata PCI card. Will CentOS be able to see the drives as they will be connected to the card? -ML

5 4

Re: [CentOS] CentOS for non-tech user
by Marcelo M. Garcia 01 Oct '09

01 Oct '09

Sorin Srbu wrote: >>> HTH. >> Hi Sorin >> >> You can "sudo bash" and you will have a root terminal. In it, you can >> set the root password for root. > > Yupp, as I said, at the time I was testing Ubuntu, I was rather green and > didn't know about those little tricks. Now is a another matter, but I still > prefer CentOS. Besides, opening a terminal and typing in "su -" is way > faster. Saves keystrokes. Hi The reason for Ubuntu in the laptop is simply because CentOS didn't work very well. I followed the wiki about XPS M1530[1] and everything almost work. At the office one of the developers uses a Dell Precision laptop with RHEL 5.3 (it came from Dell with RHEL) and works really fine. So, I image that some laptops are more CentOS/RHEL-friendly than others. Now I'm used to use sudo. It is a great tool. I use it everywhere. And everything I do appears in the logwatch. Regards mg. [1] http://wiki.centos.org/HowTos/Laptops/Dell/XPS_M1530

3 2

ftp issue in Centos 5.3
by Dave Stevens 01 Oct '09

01 Oct '09

I manage a small server that I back up weekly. I do this by making a tarball of relevant files then transferring it over the local subnet to my station (Fedora 11), whereupon I burn it to DVD. There is no optical burner on the server. The tarball amounts to a bit under 5 gigs. Recently I've started getting an error telling me to try PASV or PORT first. I use the gFTP client on my machine and as far as I know there is no option in this program to use either option either locally or remotely (on the server.) Any ideas on this one? Dave -- When addiction becomes commonplace in a society, people become addicted not only to alcohol and drugs, but to a thousand other destructive pursuits: money, power, dysfunctional relationships, or video games. A social perspective on addiction does not deny individual differences in vulnerability to addiction, but it removes them from the foreground of attention, because social determinants are more powerful.

3 3

Re: [CentOS] Asterisk and VOIP was Re: CentOS for non-tech user
by rb4centos＠gmail.com 30 Sep '09

30 Sep '09

-----Original Message----- From: Brian Mathis The difference is that CentOS is a general-purpose OS that can be used for many things, and has a much bigger installed base. That makes it more of a target and would likely be included in scanning tools. A custom OS running on a PBX might also have vulnerabilities, but it's also probably not a big target because of the diversity of systems out there and relative limited utility one would have if such a system were compromised. That you tend to tend to think of it as an "appliance" running the phone system does not change the fact that it's actually a full-blown server OS with the same issues as other servers. _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

1 0

How to autoconfigure network?
by happymaster23 30 Sep '09

30 Sep '09

Hello, I have installed new network card under CentOS 5.3, but there are some problems. I want delete existing ifcfg-eth0 and automatically make new on as it is during OS installation process. Is it possible? Thank you

6 12

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss