Discuss

discuss@lists.centos.org

34753 discussions

Apple mail to Evolution
by Jason Todd Slack-Moehrle 16 May '09

16 May '09

Does anyone have an idea on how to convert Apple mail to Evolution? I have loved Evolution since early Ximian days.... -Jason

2 1

yum-updatesd no longer working
by Stewart Williams 16 May '09

16 May '09

I recently enabled yum-updatesd on two identical servers and configured it to notify me of updates via e-mail. This worked fine to start with and it notified me on both machines when the kernel-2.6.18-128.1.10.el5.x86_64.rpm update was released last week. However, today I realised that yum-updatesd was not running and thought it was due to rebooting after the kernel update and that I'd forgotten to set it to start at boot. But this was not the case, it is set to start, however running '/sbin/service yum-updatesd start' yields: yum-updatesd dead but subsys locked I have tried removing /var/lock/subsys/yum-updatesd, but when I restart the service it says [OK] and yum-updatesd doesn't run, but the lock file is re-created. yum-updatesd --debug does not help either. Any help or idea's greatly appreciated. Thanks

2 1

Re: [CentOS] Dealing with brute force attacks
by James B. Byrne 16 May '09

16 May '09

On: Thu, 14 May 2009 08:48:36 -0700, Bill Campbell <centos(a)celestial.com> wrote: > > You might look at fail2ban which can automatically create > iptables blocks when things like this happen. > I went to the source forge website, but the rh rpm is inaccessible. I really do not wish to join yet another mailing list simply to report this so if anyone here is a member there as well please let them know. Regards, -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

8 12

Yum update gone bad...
by Anthony Kamau 16 May '09

16 May '09

Morning list! I have a situation that was brought about by a system crash during a yum update. The motherboard suffered a catastrophic failure due to busted CAPS. Lucky for me (or so I thought at the time), I had a spare, identical motherboard as the one that failed. I replaced the dud board and rebooted. This machine runs headless and is my primary (personal/home) mail server. I normally access the booting console via hyper terminal when I need to change boot parameters or just watch the system boot up! Getting to the point, nothing comes up at all on the terminal screen. So I hooked up a monitor and keyboard (even a mouse) to check what was going on. What I noticed immediately was that the kernel screen selection screen did not appear! Instead, I just got a message at the bottom on the screen stating "Grub Loading Stage 2" or something to that effect. Straight from there, was the usual scrolling text up to the point where SELinux starts. Then nothing displays at all until the final login screen. Not even the "Nash" screen that prompts one to enter "I" for interactive start-up appeared! Could someone enlighten me on what I could check? I have reinstalling all packages that were installed just before and after the system crash to no avail. This is a system that was running CentOS 5.3 final and I was updating several packages including upgrading the kernel from 2.6.18-128.1.6.el5 to 2.6.18-128.1.10.el5. Cheers, tkb.

2 2

problem of update by yum
by cjzjm100 16 May '09

16 May '09

I had updated by yum,however alway received the same result. The result was: filelists.xml.gz | 1.0 MB 00:15 Traceback (most recent call last): File "/usr/bin/yum", line 29, in ? yummain.user_main(sys.argv[1:], exit_code=True) File "/usr/share/yum-cli/yummain.py", line 229, in user_main errcode = main(args) File "/usr/share/yum-cli/yummain.py", line 145, in main (result, resultmsgs) = base.buildTransaction() File "/usr/lib/python2.4/site-packages/yum/__init__.py", line 647, in buildTransaction (rescode, restring) = self.resolveDeps() File "/usr/lib/python2.4/site-packages/yum/depsolve.py", line 704, in resolveDeps for po, dep in self._checkFileRequires(): File "/usr/lib/python2.4/site-packages/yum/depsolve.py", line 939, in _checkFileRequires if not self.tsInfo.getOldProvides(filename) and not self.tsInfo.getNewProvides(filename): File "/usr/lib/python2.4/site-packages/yum/transactioninfo.py", line 414, in getNewProvides for pkg, hits in self.pkgSack.getProvides(name, flag, version).iteritems(): File "/usr/lib/python2.4/site-packages/yum/packageSack.py", line 300, in getProvides return self._computeAggregateDictResult("getProvides", name, flags, version) File "/usr/lib/python2.4/site-packages/yum/packageSack.py", line 470, in _computeAggregateDictResult sackResult = apply(method, args) File "/usr/lib/python2.4/site-packages/yum/sqlitesack.py", line 861, in getProvides return self._search("provides", name, flags, version) File "/usr/lib/python2.4/site-packages/yum/sqlitesack.py", line 43, in newFunc return func(*args, **kwargs) File "/usr/lib/python2.4/site-packages/yum/sqlitesack.py", line 837, in _search for pkg in self.searchFiles(name, strict=True): File "/usr/lib/python2.4/site-packages/yum/sqlitesack.py", line 43, in newFunc return func(*args, **kwargs) File "/usr/lib/python2.4/site-packages/yum/sqlitesack.py", line 586, in searchFiles self._sql_pkgKey2po(rep, cur, pkgs) File "/usr/lib/python2.4/site-packages/yum/sqlitesack.py", line 470, in _sql_pkgKey2po pkg = self._packageByKey(repo, ob['pkgKey']) File "/usr/lib/python2.4/site-packages/yum/sqlitesack.py", line 413, in _packageByKey po = self.pc(repo, cur.fetchone()) File "/usr/lib/python2.4/site-packages/yum/sqlitesack.py", line 68, in __init__ self._read_db_obj(db_obj) File "/usr/lib/python2.4/site-packages/yum/sqlitesack.py", line 94, in _read_db_obj setattr(self, item, _share_data(db_obj[item])) TypeError: unsubscriptable object What's the problem?

2 1

can non-owner change file group setup?
by mcclnx mcc 16 May '09

16 May '09

We are tried to count how many files belong to certain group. Our system administrator told us "non-owner" can easy change file group name to another. I have been tried several combination and never successful (only ROOT can change file group to other name). Does anyone know how "no-owner" can change file group name? Thanks. ______________________________________________________________________________________________________ 付費才容量無上限？Yahoo!奇摩電子信箱2.0免費給你，信件永遠不必刪！ http://tw.mg0.mail.yahoo.com/dc/landing

10 14

Preventing hour-long fsck on ext3-filesystem
by Bernhard Gschaider 16 May '09

16 May '09

Hi! I'm justing in the process of setting up a new fileserver for our company. I'm installing CentOS 5.3 (64 bit) on it. One of the "problems" with it is that it has a 3.5TB filesystem for the user data which I formatted during setup as an ext3. Now my experience with our current fileserver is that a 0.5TB ext3 filesystem needs approx half an hour to complete (and kicks in every so and so reboots or every 180days). My estimate is that for the larger filesystem (and the faster machine) the fsck would need well over an hour (being optimistic). I dread the day when I have to reboot the server and wait for 2hours or more just because the system thought it would be a prudent thing to check the filesystem. My question: - is there another stable filesystem (XFS, ReiserFS ...) in the centosplus-kernel where this could be avoided (fsck is faster) and that is as safe as ext3 - Or would it be better to switch off automatic checking with tune2fs Any opinion/experience welcome. I looked around a bit but couldn't find a good answer Bernhard PS: Sorry for the stupid question, but I'm only part-time admin and testing this myself would take weeks, I guess -- --------------------------------------------------------------------------- DI Bernhard F.W. Gschaider --------------------------------------------------------------------------- EMail: Bernhard.Gschaider(a)ice-sf.at WWW : www.ice-sf.at Jabber : bgschaid(a)jabber.org Tel: +43(3842)98282-42 Fax: +43(3842)98282-02 ---------------------------------------------------------------------------

6 6

Subversion causing Apache to hog memory
by Neil Aggarwal 15 May '09

15 May '09

Hello: I posted this to the subversion list yesterday and have not received a reponse. I am hoping someone on this list will be able to help me. I have a CentOS 5 server running subversion 1.5.6-0.2.el5.rf installed using yum from the rpmforge repository. I am using svnsync to mirror from another repository to the local machine. It is called from a cron job every 5 minutes. After a few days of running fine, I started getting this error from cron: svnsync: DAV request failed; it's possible that the repository's pre-revprop-change hook either failed or is non-existent svnsync: At least one property change failed; repository is unchanged svnsync: Error setting property 'sync-lock': Failed to start '/usr/local/svn/MyProject/hooks/pre-revprop-change' hook Looking in /var/log/httpd/error_log, I see this: Could not execute PROPPATCH. [500, #206] Failed to start '/usr/local/svn/MyProject/hooks/pre-revprop-change' hook [500, #165001] Can't start process '/usr/local/svn/MyProject/hooks/pre-revprop-change': Cannot allocate memory [500, #12] Looking at top, the machine has allocated all of the RAM available. When I stop httpd, the RAM comes back. I rebooted the machine and ran top in a shell. I then issued the svnsync command in another shell. I can see the memory usage going up each time I run the svnsync command but it does not seem to come down even after leaving the machine idle for a while. If I then stop httpd, the memory comes back. It looks like svnsync is somehow causing apache to hog memory. Any ideas? Thanks, Neil -- Neil Aggarwal, (832)245-7314, www.JAMMConsulting.com Eliminate junk email and reclaim your inbox. Visit http://www.spammilter.com for details.

1 0

Dell 2950 with CentOS 5.3
by Kian Sin Teo 15 May '09

15 May '09

Hi all, Any one experience issue with Dell 2950 and CentOS 5.3, I face some issue like this, server install alright. Keep it in production for a while, Done an update one the server. Reboot , It said no boot devices found. Check on the perc6/i controller the both harddisk show online and optimal. Using live cd to check, the both harddisk still have the data. My issue was solve by removing the hard disk, clear the raid configuration. Put in the hard disk and reimport the configuration from the harddisk. The server able to boot up properly. any one know the cause of it, is it the Dell Hardware issue or it is an OS related issue. Regards KS

4 3

Possible deadlock: Trying to lookup SID S-1-1-0 with passdb backend SAMBA
by JohnS 15 May '09

15 May '09

May 15 14:14:07 twittle winbindd[2635]: [2009/05/15 14:14:07, 0] nsswitch/idmap.c:idmap_init(772) May 15 14:14:07 twittle winbindd[2635]: ERROR: Initialization failed for alloc backend tdb, deferred! May 15 14:14:07 twittle winbindd[2598]: [2009/05/15 14:14:07, 0] nsswitch/winbindd_passdb.c:sid_to_name(126) May 15 14:14:07 twittle winbindd[2598]: Possible deadlock: Trying to lookup SID S-1-1-0 with passdb backend May 15 14:14:07 twittle winbindd[2598]: [2009/05/15 14:14:07, 0] nsswitch/winbindd_passdb.c:sid_to_name(126) May 15 14:14:07 twittle winbindd[2598]: Possible deadlock: Trying to lookup SID S-1-5-2 with passdb backend May 15 14:14:30 twittle nmbd[2633]: [2009/05/15 14:14:30, 0] nmbd/nmbd_become_lmb.c:become_local_master_stage2(396) [root@twittle ~]# rpm -q samba samba-3.0.33-3.7.el5 http://bugs.centos.org/view.php?id=2790 Does not Apply here. "vscan-clamav" runs in the Global Sections of all smb.confs of which I do not see a problem here. I have multiple smb.conf files that I use for testing. While it is not a big problem for me I imagine it is for others. The problem only happens when going from using an ldap backkend or AD ldap that is using winbind for enumeration of users and groups or if just in general the winbind service is running. On this happening no Samba Shares are accessable. Does anyone have a fix for this? Or Patch. JohnStanley

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss