Discuss

discuss@lists.centos.org

34753 discussions

RHEL -> CentOS
by John R Pierce 04 Feb '09

04 Feb '09

I have a system that was originally installed with RHEL 3 x86_64, and I've since 'updated' it to CentOS 3 via installing yum and centos-release, then running a yum update. is there any way I can force -all- installed packages to be replaced with their centos analogs just to be sure its all consistent?

5 5

/etc/X11/xorg.conf question
by Lanny Marcus 03 Feb '09

03 Feb '09

If I use "system-config-display" or "system-config-display --reconfig" although I get a message that I need to log out of GNOME, to have the new file written, for new Display Resolution, logging out or restarting the box does not result in the new settings for the Display taking hold. Sometimes, the number of colors is updated, but *never* the Resolution. Below is my xorg.conf file. What do I need to include in xorg.conf for the resolution to be 1280 x 1024 instead of the current 1600 x 1200? Display is a Dell M991 and the Video Card is shown as Nvidia NV11 (GeForce2 MX/MX400). CentOS 5.2 (32 bit) fully updated. TIA! # Xorg configuration created by system-config-display Section "ServerLayout" Identifier "single head configuration" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "Device" Identifier "Videocard0" Driver "nv" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" DefaultDepth 16 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 Modes "1600x1200" "1600x1024" "1440x900" "1400x1050" "1280x1024" "1280x1024" "1280x960" "1280x960" "1280x800" "1280x800" "1152x864" "1152x864" "1152x768" "1152x768" "1024x768" "1024x768" "800x600" "800x600" "640x480" "640x480" EndSubSection EndSection

5 6

Re: [CentOS] Internet problem
by fabian dacunha 03 Feb '09

03 Feb '09

Dear All, I have a Centos 5.2 server used as a squid proxy server for quite sometime and was workin fine after a power failure the system refused to boot i jus see the grub boot load screen n then hangs so using the space bar n with the arrow keys i selected my earlier kernel and it booted fine i think that the latest kernel file i have that isvmlinuz-2.6.18-92.1.17.el5xen is corrupted. how could i restore it back will yum upgrade solve the problem appreciate ur help regards fabian -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

2 1

Port Forwarding
by Thom Paine 03 Feb '09

03 Feb '09

I'm having trouble getting port forwarding working on my one box. I have 2 incoming internet connections. I have 2 servers on these connections. pubinternet privinternet eth0:x.x.x.x eth0:y.y.y.y eth1:10.10.10.1 eth1:10.10.10.4 I need to be able to port forward traffic from y.y.y.y to the box on 10.10.10.1. I have my firewall configured (I use gshield) but 10.10.10.1 does not seem to answer when I try and test. I use gshield all the time for other servers with only 1 connection, and it works awesome. I can't seem to get it to forward traffic from y.y.y.y to 10.10.10.1. 10.10.10.1 and 10.10.10.4 are connected together with a switch, and I am able to telnet to 10.10.10.1 from 10.10.10.4 on port 25. Is there some step with networking that I am missing in getting this to work? Thanks. -- -=/>Thom

6 16

Intel DG33BU motherboard
by Paolo Supino 03 Feb '09

03 Feb '09

Hi I've installed CentOS 5.2 (i386) in a computer with a DG33BU motherboard ... When I installed it it crashed because of ACPI issues. Searching Google I found that I need to turn ACPI off in order to successfully install CentOS, which I did. After a while I noticed that because of ACPI is off the Linux kernel finds, initializes and uses only 1 CPU core in the Q6600 quad core CPU that is installed in this computer :-( How can I force it to find, initialize and use all the 4 cores in the computer even if ACPI is off? -- TIA Paolo

8 20

System rescue help - UPS
by Rajagopal Swaminathan 03 Feb '09

03 Feb '09

Greetings, I am quite surprised that ericsson was not even mentioned in the UPS thread Rajagopal Disclosure: I am not an employee or anyway related to Ericsson except for asking them for couple of quotations (in India -- yeah _we_ need UPS the most..... NExt to diesel power gnerators fondly refered to as "DG" -- not to be confused with "Data General").

1 0

CentOS-announce Digest, Vol 48, Issue 1
by centos-announce-request＠centos.org 03 Feb '09

03 Feb '09

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2009:0019-01: Important CentOS 2 i386 hanterm-xf security update (John Newbigin) 2. CESA-2009:0005-01: Moderate CentOS 2 i386 gnome-vfs security update (John Newbigin) 3. CESA-2009:0004-01: Important CentOS 2 i386 openssl security update (John Newbigin) 4. CESA-2009:0020-01: Moderate CentOS 2 i386 bind security update (John Newbigin) 5. CESA-2009:0001-01: Important CentOS 2 i386 kernel security update (John Newbigin) 6. GFS Update for CentOS 3 kernel 2.4.21-58.EL (Tru Huynh) ---------------------------------------------------------------------- Message: 1 Date: Tue, 03 Feb 2009 10:25:09 +1100 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2009:0019-01: Important CentOS 2 i386 hanterm-xf security update To: centos-announce(a)centos.org Message-ID: <498780D5.7060607(a)ict.swin.edu.au> Content-Type: text/plain; charset=ISO-8859-1; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHSA-2009:0019-01 Important: hanterm-xf security update Files available: hanterm-xf-2.0.5-5.AS21.2.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin ITS Senior Analyst / Programmer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ Message: 2 Date: Tue, 03 Feb 2009 10:27:51 +1100 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2009:0005-01: Moderate CentOS 2 i386 gnome-vfs security update To: centos-announce(a)centos.org Message-ID: <49878177.6060201(a)ict.swin.edu.au> Content-Type: text/plain; charset=ISO-8859-1; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHSA-2009:0005-01 Moderate: gnome-vfs security update Files available: gnome-vfs-1.0.1-18.2.i386.rpm gnome-vfs-devel-1.0.1-18.2.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin ITS Senior Analyst / Programmer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ Message: 3 Date: Tue, 03 Feb 2009 10:30:18 +1100 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2009:0004-01: Important CentOS 2 i386 openssl security update To: centos-announce(a)centos.org Message-ID: <4987820A.5060306(a)ict.swin.edu.au> Content-Type: text/plain; charset=ISO-8859-1; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHSA-2009:0004-01 Important: openssl security update Files available: openssl-0.9.6b-49.i386.rpm openssl-0.9.6b-49.i686.rpm openssl-devel-0.9.6b-49.i386.rpm openssl-perl-0.9.6b-49.i386.rpm openssl095a-0.9.5a-34.i386.rpm openssl096-0.9.6-34.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin ITS Senior Analyst / Programmer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ Message: 4 Date: Tue, 03 Feb 2009 10:32:53 +1100 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2009:0020-01: Moderate CentOS 2 i386 bind security update To: centos-announce(a)centos.org Message-ID: <498782A5.7040507(a)ict.swin.edu.au> Content-Type: text/plain; charset=ISO-8859-1; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHSA-2009:0020-01 Moderate: bind security update Files available: bind-9.2.1-11.el2.i386.rpm bind-devel-9.2.1-11.el2.i386.rpm bind-utils-9.2.1-11.el2.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin ITS Senior Analyst / Programmer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ Message: 5 Date: Tue, 03 Feb 2009 10:36:06 +1100 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2009:0001-01: Important CentOS 2 i386 kernel security update To: centos-announce(a)centos.org Message-ID: <49878366.1030304(a)ict.swin.edu.au> Content-Type: text/plain; charset=ISO-8859-1; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHSA-2009:0001-01 Important: kernel security update Files available: kernel-2.4.9-e.74.athlon.rpm kernel-2.4.9-e.74.i686.rpm kernel-BOOT-2.4.9-e.74.i386.rpm kernel-debug-2.4.9-e.74.i686.rpm kernel-doc-2.4.9-e.74.i386.rpm kernel-enterprise-2.4.9-e.74.i686.rpm kernel-headers-2.4.9-e.74.i386.rpm kernel-smp-2.4.9-e.74.athlon.rpm kernel-smp-2.4.9-e.74.i686.rpm kernel-source-2.4.9-e.74.i386.rpm kernel-summit-2.4.9-e.74.i686.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin ITS Senior Analyst / Programmer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ Message: 6 Date: Tue, 3 Feb 2009 15:39:57 +0100 From: Tru Huynh <tru(a)pasteur.fr> Subject: [CentOS-announce] GFS Update for CentOS 3 kernel 2.4.21-58.EL To: centos-announce(a)centos.org Message-ID: <20090203143957.GA24870(a)sillage.bis.pasteur.fr> Content-Type: text/plain; charset=us-ascii The files have been signed and uploaded :) Thanks John, Tru ----- Forwarded message from John Newbigin <jnewbigin(a)ict.swin.edu.au> ----- Date: Tue, 03 Feb 2009 10:03:21 +1100 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: GFS Update for CentOS 3 kernel 2.4.21-58.EL New GFS packages for the 2.4.21-58.EL kernel are ready. http://rhn.redhat.com/errata/RHBA-2008-1006.html http://www.ict.swin.edu.au/personal/jnewbigin/GFS/GFS-6.0.2.36-9.i386.rpm http://www.ict.swin.edu.au/personal/jnewbigin/GFS/GFS-devel-6.0.2.36-9.i386… http://www.ict.swin.edu.au/personal/jnewbigin/GFS/GFS-modules-6.0.2.36-9.i3… http://www.ict.swin.edu.au/personal/jnewbigin/GFS/GFS-6.0.2.36-9.i686.rpm http://www.ict.swin.edu.au/personal/jnewbigin/GFS/GFS-devel-6.0.2.36-9.i686… http://www.ict.swin.edu.au/personal/jnewbigin/GFS/GFS-modules-6.0.2.36-9.i6… http://www.ict.swin.edu.au/personal/jnewbigin/GFS/GFS-modules-hugemem-6.0.2… http://www.ict.swin.edu.au/personal/jnewbigin/GFS/GFS-modules-smp-6.0.2.36-… These packages are signed with my jnewbigin-csgfs(a)ict.swin.edu.au key. They need to be resigned with the CentOS-3 key and published to the csgfs repo. Thanks John. -- John Newbigin ITS Senior Analyst / Programmer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ----- End forwarded message ----- -- Dr Tru Huynh | http://www.pasteur.fr/recherche/unites/Binfs/ mailto:tru@pasteur.fr | tel/fax +33 1 45 68 87 37/19 Institut Pasteur, 25-28 rue du Docteur Roux, 75724 Paris CEDEX 15 France ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 48, Issue 1 **********************************************

1 0

squid timeout error
by Gopinath Achari 03 Feb '09

03 Feb '09

Dear All, i am using squid-2.5STABLE Below error message occurs if the site is accessed through proxy server. same problem occurs for many other sites likes dkc1.digikey.com But the same site opens clearly without any problem if accessed directly. Please help Thanks in advance. ERROR The requested URL could not be retrieved While trying to retrieve the URL: http://www.wisegeek.com/ The following error was encountered: * Connection to 174.132.22.20 Failed The system returned: (110) Connection timed out The remote host or network may be down. Please try the request again. Your cache administrator is root. Generated Sat, 31 Jan 2009 13:15:14 GMT by proxyserver (squid/2.5.STABLE14) when checked in access.log TCP/MISS 504 www.wisegeek.com error messages in the squid logs file Regards, Gopinath M.

3 2

Automounter issue
by David.Mackintosh＠xdroop.com 03 Feb '09

03 Feb '09

Anyone seen this before? I have a number of file systems nfs mounted onto clients running various versions of CentOS (and Upstream), although mostly they are v5.x flavors. =20 The server is a Network Appliance filer. When the build process for this team runs, it sometimes dies because it can't find files in the automounter tree; if the engineer checks, he sometimes sees a problem, and sometimes doesn't; for example: [pdbuild@build-c5u1: ~] ll /tools/vault/kernels ls: /tools/vault/kernels: No such file or directory [pdbuild@build-c5u1: ~] ll /tools/vault/kernels total 152K drwxr-xr-x 4 pdbuild everyone 4.0K Aug 7 2007 2.4.21-40.EL.CUSTOM.01smp/ drwxr-xr-x 7 pdbuild everyone 4.0K Jun 26 2007 2.6.16.33-1-xen/ drwxr-xr-x 7 pdbuild everyone 4.0K Aug 7 2007 2.6.16.33-xen/ drwxr-xr-x 4 pdbuild everyone 4.0K Jan 3 2008 2.6.18-53.1.4.el5/ drwxr-xr-x 4 pdbuild everyone 4.0K Feb 11 2008 2.6.18-53.1.6.el5/ drwxr-xr-x 4 pdbuild everyone 4.0K Nov 15 2007 2.6.18-53.el5/ drwxr-xr-x 4 pdbuild everyone 4.0K Sep 24 2007 2.6.18-8.el5/ drwxr-xr-x 7 pdbuild everyone 4.0K Oct 16 2007 2.6.18-xen/ [pdbuild@build-c5u1: ~] df /tools/vault/kernels Filesystem Size Used Avail Use% Mounted on nas02:/vol/tools/vault 779G 655G 124G 85% /tools/vault Now I've seen this before where some processes don't wait for the automount= er to do its thing before continuing; they just report "fail" and move on to the failure handling. I'm guessing that I need some magic on the automounter configuration to change this behavior, can anyone point me in the right direction? Thanks for your time. -- /\oo/\ / /()\ \ David Mackintosh | dave(a)xdroop.com | http://www.xdroop.com

5 8

Update glibc-common does not work
by Timothy Kesten 03 Feb '09

03 Feb '09

Hi Folks, using XCentOS 5. Try an update (i.e. glibc) Get some error messages 0:14:14 : Failure getting http://centosb2.centos.org/centos/5.2/updates/i386/RPMS/glibc-common-2.5-24…: 20:14:14 : --> [Errno 4] Socket Error: timed out 20:14:14 : Trying other mirror. 20:16:37 : Failure getting http://centosk.centos.org/centos/5.2/updates/i386/RPMS/glibc-common-2.5-24.…: 20:16:37 : --> [Errno -1] Package does not match intended download 20:16:37 : Trying other mirror. 20:16:37 : Failure getting http://centosq.centos.org/centos/5.2/updates/i386/RPMS/glibc-common-2.5-24.…: 20:16:37 : --> [Errno 9] Requested Range Not Satisfiable or Fehler beim Herunterladen der Pakete: glibc-common - 2.5-24.el5_2.2.i386: failure: RPMS/glibc-common-2.5-24.el5_2.2.i386.rpm from updates: [Errno 256] No more mirrors to try. What happens here? Thx Timothy

2 4

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss