Discuss

discuss@lists.centos.org

34753 discussions

script
by Mad Unix 30 Jul '08

30 Jul '08

Hi ALL #!/bin/sh # Shell script to monitor or watch the disk space # It will send an email to $ADMIN, if the (free avilable) percentage # of space is >= 90% # ------------------------------------------------------------------------- # Copyright (c) 2005 nixCraft project <http://cyberciti.biz/fb/> # This script is licensed under GNU GPL version 2.0 or above # ------------------------------------------------------------------------- # This script is part of nixCraft shell script collection (NSSC) # Visit http://bash.cyberciti.biz/ for more information. # ---------------------------------------------------------------------- # Linux shell script to watch disk space (should work on other UNIX oses ) # SEE URL: http://www.cyberciti.biz/tips/shell-script-to-watch-the-disk-space.html # set admin email so that you can get email ADMIN="me(a)somewher.com" # set alert level 90% is default ALERT=90 df -H | grep -vE '^Filesystem|tmpfs|cdrom' | awk '{ print $5 " " $1 }' | while read output; do #echo $output usep=$(echo $output | awk '{ print $1}' | cut -d'%' -f1 ) partition=$(echo $output | awk '{ print $2 }' ) if [ $usep -ge $ALERT ]; then echo "Running out of space \"$partition ($usep%)\" on $(hostname) as on $(date)" | mail -s "Alert: Almost out of disk space $usep" $ADMIN fi done Am trying to run the above script on my machine, it gave the following error [root@linux8 script]# ./disk_monitor.sh ./disk_monitor.sh: line 23: [: /dev/mapper/VolGroup00-LogVol00: integer expression expected ./disk_monitor.sh: line 23: [: /: integer expression expected Any help? -- Your search - madunix - did not match any documents.

4 3

Evolution Calendar crash
by Lanny Marcus 30 Jul '08

30 Jul '08

This was happening, *very* frequently, after the upgrade to CentOS 5.2 (32 bit). Mark (MHR) also had problems with this. Neither of us could report it with BugBuddy, which requests a newer version of GNOME. Now, after having installed 15-20 updates that came out after the big upgrade to 5.2, it is *very* rare for me to have Evolution Calendar crash when I exit Evolution. I do not use Evolution Calendar. Distribution: CentOS release 5.2 (Final) Gnome Release: 2.16.0 2007-02-18 (CentOS) BugBuddy Version: 2.16.0 Memory status: size: 226492416 vsize: 0 resident: 226492416 share: 0 rss: 40034304 rss_rlim: 0 CPU usage: start_time: 1217430786 rtime: 0 utime: 4583 stime: 0 cutime:4100 cstime: 0 timeout: 483 it_real_value: 0 frequency: 1 Backtrace was generated from '/usr/bin/evolution' (no debugging symbols found) Using host libthread_db library "/lib/libthread_db.so.1". (no debugging symbols found) <snip, 17 identical lines deleted) [Thread debugging using libthread_db enabled] [New Thread -1208465712 (LWP 3028)] [New Thread -1370231920 (LWP 3754)] [New Thread -1338922096 (LWP 3303)] [New Thread -1402664048 (LWP 3301)] (no debugging symbols found) (no debugging symbols found) <snip, many identical lines deleted) 0x00cf6402 in __kernel_vsyscall () #0 0x00cf6402 in __kernel_vsyscall () #1 0x00127d7b in waitpid () from /lib/libpthread.so.0 #2 0x00654c26 in gnome_gtk_module_info_get () from /usr/lib/libgnomeui-2.so.0 #3 0x0805dc19 in POA_GNOME_Evolution_DataServer_InterfaceCheck__fini () #4 <signal handler called> #5 0x04191700 in ldap_int_initialize () from /usr/lib/libexchange-storage-1.2.so.3 #6 0x041530d2 in ?? () from /usr/lib/libexchange-storage-1.2.so.3 #7 0x041c103c in ?? () from /usr/lib/libexchange-storage-1.2.so.3 #8 0xb7fafb80 in ?? () #9 0xbf949bd8 in ?? () #10 0x0415307a in ?? () from /usr/lib/libexchange-storage-1.2.so.3 #11 0x041c1304 in ?? () from /usr/lib/libexchange-storage-1.2.so.3 #12 0x0074f240 in _rtld_local () from /lib/ld-linux.so.2 #13 0xbf949be8 in ?? () #14 0x041a729c in _fini () from /usr/lib/libexchange-storage-1.2.so.3 #15 0x041a729c in _fini () from /usr/lib/libexchange-storage-1.2.so.3 #16 0x007427ce in _dl_fini () from /lib/ld-linux.so.2 #17 0x04ea59d9 in exit () from /lib/libc.so.6 #18 0x04e8fdf4 in __libc_start_main () from /lib/libc.so.6 #19 0x0804f361 in ?? () Thread 4 (Thread -1402664048 (LWP 3301)): #0 0x00cf6402 in __kernel_vsyscall () No symbol table info available. #1 0x04f411c3 in poll () from /lib/libc.so.6 No symbol table info available. #2 0x02298283 in g_main_context_check () from /lib/libglib-2.0.so.0 No symbol table info available. #3 0x022985f9 in g_main_loop_run () from /lib/libglib-2.0.so.0 No symbol table info available. #4 0x008228b2 in e_book_get_type () from /usr/lib/libebook-1.2.so.9 No symbol table info available. #5 0x022b2eef in g_thread_create_full () from /lib/libglib-2.0.so.0 No symbol table info available. #6 0x0012046b in start_thread () from /lib/libpthread.so.0 No symbol table info available. #7 0x04f4adbe in clone () from /lib/libc.so.6 No symbol table info available. Thread 3 (Thread -1338922096 (LWP 3303)): #0 0x00cf6402 in __kernel_vsyscall () No symbol table info available. #1 0x04f411c3 in poll () from /lib/libc.so.6 No symbol table info available. #2 0x02298283 in g_main_context_check () from /lib/libglib-2.0.so.0 No symbol table info available. #3 0x022985f9 in g_main_loop_run () from /lib/libglib-2.0.so.0 No symbol table info available. #4 0x00b3b2c0 in link_set_io_thread () from /usr/lib/libORBit-2.so.0 No symbol table info available. #5 0x022b2eef in g_thread_create_full () from /lib/libglib-2.0.so.0 No symbol table info available. #6 0x0012046b in start_thread () from /lib/libpthread.so.0 No symbol table info available. #7 0x04f4adbe in clone () from /lib/libc.so.6 No symbol table info available. Thread 2 (Thread -1370231920 (LWP 3754)): #0 0x00cf6402 in __kernel_vsyscall () No symbol table info available. #1 0x00126a4e in __lll_mutex_lock_wait () from /lib/libpthread.so.0 No symbol table info available. #2 0x001228a0 in _L_mutex_lock_85 () from /lib/libpthread.so.0 No symbol table info available. #3 0x001223ed in pthread_mutex_lock () from /lib/libpthread.so.0 No symbol table info available. #4 0x0805dc01 in POA_GNOME_Evolution_DataServer_InterfaceCheck__fini () No symbol table info available. #5 <signal handler called> No symbol table info available. #6 0x001223b0 in pthread_mutex_lock () from /lib/libpthread.so.0 No symbol table info available. #7 0x008877c2 in PR_Lock () from /usr/lib/libnspr4.so No symbol table info available. #8 0x0088c8d5 in PR_ProcessExit () from /usr/lib/libnspr4.so No symbol table info available. #9 0x0011fb8c in __nptl_deallocate_tsd () from /lib/libpthread.so.0 No symbol table info available. #10 0x00120479 in start_thread () from /lib/libpthread.so.0 No symbol table info available. #11 0x04f4adbe in clone () from /lib/libc.so.6 No symbol table info available. Thread 1 (Thread -1208465712 (LWP 3028)): #0 0x00cf6402 in __kernel_vsyscall () No symbol table info available. #1 0x00127d7b in waitpid () from /lib/libpthread.so.0 No symbol table info available. #2 0x00654c26 in gnome_gtk_module_info_get () from /usr/lib/libgnomeui-2.so.0 No symbol table info available. #3 0x0805dc19 in POA_GNOME_Evolution_DataServer_InterfaceCheck__fini () No symbol table info available. #4 <signal handler called> No symbol table info available. #5 0x04191700 in ldap_int_initialize () from /usr/lib/libexchange-storage-1.2.so.3 No symbol table info available. #6 0x041530d2 in ?? () from /usr/lib/libexchange-storage-1.2.so.3 No symbol table info available. #7 0x041c103c in ?? () from /usr/lib/libexchange-storage-1.2.so.3 No symbol table info available. #8 0xb7fafb80 in ?? () No symbol table info available. #9 0xbf949bd8 in ?? () No symbol table info available. #10 0x0415307a in ?? () from /usr/lib/libexchange-storage-1.2.so.3 No symbol table info available. #11 0x041c1304 in ?? () from /usr/lib/libexchange-storage-1.2.so.3 No symbol table info available. #12 0x0074f240 in _rtld_local () from /lib/ld-linux.so.2 No symbol table info available. #13 0xbf949be8 in ?? () No symbol table info available. #14 0x041a729c in _fini () from /usr/lib/libexchange-storage-1.2.so.3 No symbol table info available. #15 0x041a729c in _fini () from /usr/lib/libexchange-storage-1.2.so.3 No symbol table info available. #16 0x007427ce in _dl_fini () from /lib/ld-linux.so.2 No symbol table info available. #17 0x04ea59d9 in exit () from /lib/libc.so.6 No symbol table info available. #18 0x04e8fdf4 in __libc_start_main () from /lib/libc.so.6 No symbol table info available. #19 0x0804f361 in ?? () No symbol table info available. #0 0x00cf6402 in __kernel_vsyscall ()

1 0

Cyrus + Ldap...
by Sergio Belkin 30 Jul '08

30 Jul '08

Hi, I have a server running with Centos 5.1 and: Cyrus: Lan POP and IMAP server both with SSL and plain and login mechanisms LDAP with SSL + SASL User passwords in LDAP are encrypted. Everything works fine. But I'd want to reduce overhead due SSL and change to Cyrus with md5 mechanism (or another nonplain mechanism) Can I do that? Please bear in mind, that I don't want to use non-encrypyted passwords on LDAP. Thanks in advance! -- -- Open Kairos http://www.openkairos.com Watch More TV http://sebelk.blogspot.com Sergio Belkin -

2 1

Modem network card conflict
by Shawn Everett 30 Jul '08

30 Jul '08

Hi All, Here's a strange one for you... I have a Linux box with a PCMCIA adapter PCI card in it. Plugged into said card is a cellular modem card. I can configure wvdial and dial the modem card perfectly. My ppp0 interface comes up and I can ping everything. I also have a network card on the motherboard. Once again, by itself the network card works correctly. That is with the modem NOT dialed up. Here's where things get interesting... If I flush the firewall rules: iptables -F Bring down the eth0 interface: ifconfig eth0 down Connect with the modem: wvdial & Bring up the interface: ifconfig eth0 192.168.7.1 At this point the ppp0 interface drops off and redials. It is no longer able to maintain a stable connection. ppp0 and eth0 do not use the same IP range. Thoughts? Shawn

2 1

libstdc++.so.5 for xten voip phone
by Robert Moskowitz 30 Jul '08

30 Jul '08

Which rpm has libstdc++.so.5? xten-xlite for linux says it needs this. Of course, there will be something else it will need after I get this....

2 6

Re: [CentOS] slow NFS speed
by Ross S. W. Walker 30 Jul '08

30 Jul '08

70-80MB/s is good for NFS/CIFS networking given the 4k block size and network latency. It's not the MB/s driven by your storage system that get you it's the IOPS throttled by the network latency and two-way communication over it. -Ross ----- Original Message ----- From: centos-bounces(a)centos.org <centos-bounces(a)centos.org> To: CentOS mailing list <centos(a)centos.org> Sent: Tue Jul 29 23:20:10 2008 Subject: [CentOS] slow NFS speed We upgraded from a 10/100Mbs to a 2 100/1000 bonding. We notice the speeds of NFS to be around 70-80Mb/sec. Which is slow, especially with bonding. I was wondering if we need to tune anything special with the Network and NFS. Does anyone have any experience with this? TIA _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos ______________________________________________________________________ This e-mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution or copying of this e-mail, and any attachments thereto, is strictly prohibited. If you have received this e-mail in error, please immediately notify the sender and permanently delete the original and any copy or printout thereof.

1 0

Logrotate Problem
by Balaji 30 Jul '08

30 Jul '08

Dear All, Currently i am using CentOS 4.4 Linux I have configured crontab to run cron.daily at 4:02 am 2 4 * * * root run-parts /etc/cron.daily On 4:02 am my pc is shutdown and i am boot-up my pc on 13:11:10 Please verify the system log messages from "/var/log/messages" file Jul 30 13:11:10 localhost syslogd 1.4.1: restart (remote reception). Jul 30 13:11:10 localhost snmpd[2663]: Received TERM or STOP signal... shutting down... Jul 30 13:11:11 localhost snmpd: snmpd shutdown succeeded Jul 30 13:11:11 localhost snmpd: snmpd startup succeeded Jul 30 13:11:12 localhost syslogd 1.4.1: restart (remote reception). Jul 30 13:11:12 localhost logrotate: ALERT exited abnormally with [1] But Logrotate will be done after PC is boot-up Please verify the logrotate messages from "/var/spool/mail/root" file From root@localhost Wed Jul 30 13:15:07 2008 Return-Path: <root@localhost> Received: from localhost (localhost.localdomain [127.0.0.1]) by localhost (8.13.1/8.13.1) with ESMTP id m6U7j7ll012654 for <root@localhost>; Wed, 30 Jul 2008 13:15:07 +0530 Received: (from root@localhost) by localhost (8.13.1/8.13.1/Submit) id m6U7j7xn012641 for root; Wed, 30 Jul 2008 13:15:07 +0530 Date: Wed, 30 Jul 2008 13:15:07 +0530 Message-Id: <200807300745.m6U7j7xn012641@localhost> From: root@localhost (Anacron) To: root@localhost Content-Type: text/plain; charset="ANSI_X3.4-1968" Subject: Anacron job 'cron.daily' /etc/cron.daily/logrotate: I am not sure why this is happening. Can some one throw light on this. Regards -S.Balaji

1 0

Re: [CentOS] You didn't give me some packages, so now I'm giving you some! R, TexLive, LyX, Gnumeric, etc.
by Paul Johnson 30 Jul '08

30 Jul '08

On Mon, Jul 28, 2008 at 6:39 AM, Brent L. Bates <blbates(a)vigyan.com> wrote: > You might want to check out Scientific Linux: > > https://www.scientificlinux.org/ > > They include a number of things that CentOS doesn't, like `R'. I don't know > if or how many of the other items you are looking for are on their site. Just > check them out for yourself. They seem to try to be more up to date on some > things than CentOS. I hope this helps some. > I tried Scientific Linux and found I had to re-build the same things that I rebuild for CentOS, including R, because their versions lagged behind the cutting edge. I switched to Centos hoping that the larger user community would generate more contributions of updated packages for other things, like gnumeric or such. So far, that's not panning out, but I still have hope. I am trying to find my way into the rpmforge rpmrepo or rpmfusion or whatever it will be called. You can compare the stuff I had to build with it http://pj.freefaculty.org/ScientificLinux/5/i386/kups/packages/ and it is basically the same stuff I had to build for Centos: http://pj.freefaculty.org/Centos/i386/kups/packages/ For Scientific Linux, I even had to build Firefox, which required rebuilding yelp. Maybe people will find this thread and suggest I try the Debian off-shoots, like Ubuntu or Mint. I've been doing that too. I'm running Ubuntu on my laptop and it is closer to what I need than Fedora or CentOS. It has a slower-changing kernel than Fedora, but more up-to-date applications than Centos. However,I am not installing it in our labs or on public machines because I find it harder to secure. On a workstation that I use personally, it is OK. For someone making the switch from Windows to Linux, Ubuntu may be the preferred option. But in a lab or on a widespread basis, there are some things that hold me back. 1. The basic install of Ubuntu is less security conscious. There's no firewall in the default installation. (That is justified on the grounds that no public services are offered in the default configuration. The default iptables framework allows everything. However, users can easily install services, without realizing that there is no firewall.) It doesn't (by default) secure the bootloader with a password. I noticed that default users have more privilidges in Ubuntu than Fedora (they can use fuse file system). Without having a comprehensive knowledge of Ubuntu, I'm not sure how many other "gotchas" are waiting. Maybe I've not found the CentOS gotchas yet. 2. It includes too many invitations to ordinary users to add/remove packages. If somebody tries to run something that is not installed, the shell replies "you can install that if you type sudo apt-get install xyz". They can't do that, they don't have privileges. The Applications menu has an add/remove package program. I don't want users to be asked to do things for which they don't have privileges. The whole design of the package manager is to not be automatic, but ask for constant user intervention. Not good with many machines. 3. I do not have as much faith in the deb packaging process. For me, this the biggest reason I'm hanging around in the RPM distributions. I learned RPM building from the classic Maximum RPM, which is emphatic about keeping the 'pristine source code.' If you have never built a Debian package, you will will be in for a surprise. You can't even build a Deb package unless you manually untar the source code and create a directory inside it. My experience is that it is much harder to rebuild a debian package than it is to rebuild an SRPM. Most of the time, if you find an SRPM and you want to build it on your system, it is as simple as "rpmbuild --rebuild whatever.src.rpm". I can't find anything comparable to that for Debian. It is always necessary to open up the source package. -- Paul E. Johnson Professor, Political Science 1541 Lilac Lane, Room 504 University of Kansas

9 17

smartd on RAID controllers?
by Kai Schaetzl 30 Jul '08

30 Jul '08

It seems I can't smarm monitor disks on RAID controllers? I tried on several machines with two different controllers and on all I get this when starting up smartd: Jul 27 14:36:43 c1 smartd[5944]: Opened configuration file /etc/smartd.conf Jul 27 14:36:43 c1 smartd[5944]: Configuration file /etc/smartd.conf parsed. Jul 27 14:36:43 c1 smartd[5944]: Device: /dev/sda, opened Jul 27 14:36:43 c1 smartd[5944]: Device: /dev/sda, Bad IEC (SMART) mode page, err=4, skip device Jul 27 14:36:43 c1 smartd[5944]: Unable to register SCSI device /dev/sda at line 32 of file /etc/smartd.conf Jul 27 14:36:43 c1 smartd[5944]: Device /dev/sda not available /dev/sda is the virtual disk as it appears to CentOS as I can access it with hdparm. Do I need to use another device for the RAID array (which?) or is it impossible to smart monitor "thru" a RAID controller? Kai -- Kai Schätzl, Berlin, Germany Get your web at Conactive Internet Services: http://www.conactive.com

8 18

Shell script - ping
by Gopinath Achari 30 Jul '08

30 Jul '08

hi, how to write a scripts which launches 10 pings to different destinations at execution of single shell scripts please help me any ideas regards, Gopinath

8 8

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss