Discuss

discuss@lists.centos.org

34758 discussions

More current version of bluez
by Robert Moskowitz 14 Jul '08

14 Jul '08

Centos continues to fall behind in with the state of bluetooth development. Nothing new from 5.1 to 5.2. Has anyone got a more recent version working and have compile and rpm build instructions? Here are the rpms that I have: bluez-gnome-0.5-5.fc6.i386.rpm bluez-hcidump-1.32-1.i386.rpm bluez-libs-3.7-1.i386.rpm bluez-utils-3.7-2.el5.centos.i386.rpm bluez-utils-cups-3.7-2.el5.centos.i386.rpm gnome-bluetooth-0.7.0-10.2.el5.i386.rpm gnome-bluetooth-libs-0.7.0-10.2.el5.i386.rpm

3 3

Kernel Upgrade and RAID Card
by Ryan Nichols 14 Jul '08

14 Jul '08

Ok, I've got a RocketRAID 2300 and when i do the update of the kernel it breaks the raid card since the OS is on the raid card itself, i need to install the driver into the new kernel.. Whats the best way to do this? I am reading the manual from the manufacter, but i dont see anything as to a new kernel upgrade. Thanks, Ryan Nichols

6 17

Slow samba and Realtek card
by Emmanuel Borlet 14 Jul '08

14 Jul '08

Hello, We can see # lspci 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) I have used a custom kernel to start with centos 5.1 as an initial installation Our customer on this kernel has experienced slow pref on samba shares (50 seconds to open a file) So I have decided to updrade to centos 5.2 that have the right detection of this card inside (2.6.18-92.1.6.el5.centos.plus) [<http://wiki.centos.org/AdditionalResources/HardwareList/CentOS5/RealTek/r1 000?action=show&redirect=HardwareList%2FCentOS5%2FRealTek%2Fr1000>] # yum update # reboot The slow samba shares didn't disapear at all ! I have corrected the trouble by doing this : # cd /usr/src/ # curl -O ftp://218.210.127.132/cn/nic/r8101-1.007.00.tar.bz2 # tar jxvf r8101-1.007.00.tar.bz2 # cd r8101-1.007.00 # make clean modules # make install # depmod -a # insmod ./src/r8101.ko # reboot After the reboot we can see that the r8101 module has been activated # dmesg | egrep -i r[0-9]{4} Finaly the slow samba share was gone ! (on 10 servers) Cordialement Emmanuel Borlet Service développement RFI Informatique Groupe Yoni 8 & 12 avenue Pierre-de-Coubertin ZI Percevalière 38170 Seyssinet-Pariset France http://www.rfi-informatique.fr/ http://www.phebux.net/ Tél : +33 (0)4 76 84 25 84 Fax : +33 (0)4 76 84 25 85

3 2

Excluding packages from mirrored repo
by Bowie Bailey 14 Jul '08

14 Jul '08

The RPMForge Tools list appears to be dead, so maybe someone here can help: I am mirroring the Centos4 updates repo using mrepo. My systems are all servers and have no need of OpenOffice, so I would like to be able to exclude the 4GB (i386 & x86_64) of OpenOffice rpms when I mirror the repo. I have looked at the mrepo docs and done some Google searches, but so far, I haven't come across a way to do this. I see there is an "rsync-options" setting in mrepo.conf. Would it be safe to add an "--exclude=" option here, or is there a better way? -- Bowie

1 0

Linux equivalent of 'format' in solaris
by Ed Donahue 14 Jul '08

14 Jul '08

It shows the physical disks on the server bash-2.05b# format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c0t2d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248> /sbus@3,0/SUNW,fas@3,8800000/sd@2,0 1. c0t3d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248> /sbus@3,0/SUNW,fas@3,8800000/sd@3,0 2. c0t4d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248> /sbus@3,0/SUNW,fas@3,8800000/sd@4,0 3. c1t10d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248> /sbus@3,0/QLGC,isp@0,10000/sd@a,0 4. c1t11d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248> /sbus@3,0/QLGC,isp@0,10000/sd@b,0 5. c1t12d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248> /sbus@3,0/QLGC,isp@0,10000/sd@c,0 Specify disk (enter its number):

4 3

Re: [CentOS] NOW: Firefox 3.0 and GNOME crash when trying to view SME Server documentation WAS: OT: anything in CentOS 5.2 that uses opendns.com when browsing web?
by Lanny Marcus 14 Jul '08

14 Jul '08

On 7/8/08, Marko A. Jennings <markobiz(a)bluegargoyle.com> wrote: > On Tue, July 8, 2008 10:03 pm, Stephen John Smoogen wrote: >> On Tue, Jul 8, 2008 at 7:56 PM, Lanny Marcus <lmmailinglists(a)gmail.com> >> wrote: >>> On 7/8/08, Lanny Marcus <lmmailinglists(a)gmail.com> wrote: >>>> On Tue, Jul 8, 2008 at 8:00 PM, Ross Cavanagh >>>> <ross-cavanagh(a)bm-sms.co.jp> wrote: >>> <snip> >>>>>> >>>>> As for the SME documentation, you can select to view as one page >>>>> [the option is at the bottom of the page when you are browse to the >>>>> specific documentattion]. >>>>> >>>>> eg. >>>>> http://wiki.contribs.org/SME_Server:Documentation:Administration_Ma >>>>> nual:Booklet >>>>> >>>>> Then, you can print it to PDF if you want. >>>> >>>> >>>> Ross: I tried that, once before and it didn't work. I just tried it, >>>> again, after reading your post. Not only did Firefox 3.0 (which I got >>>> in an update today) crash, but I crashed out of GNOME, back to the >>>> login screen where you select which Desktop to use. I will send this >>>> reply and try it again. If I can get the SME Server documentation in >>>> one .pdf document on my hard drive, I'm quite interested in SME >>>> Server. Thanks. Lanny >>> >>> This is unrelated to the opendns.com thread that I began. There is >>> something wrong with GNOME and Firefox. At this time, I am using KDE >>> and Konqueror. I can view the SME Server document Ross has the link >>> for, without any problem, and without my browser and desktop crashing. >>> I haven't found the place where you view the entire document as one >>> page yet, but this is huge improvement, after having Firefox 3.0 and >>> GNOME crash, while trying to view the document. >> >> I can't replicate a crash. EG the infamous, it works for me. I think >> there is something up with your system/network. > > I can replicate it every time I try with Firefox under CentOS 5, but it > works fine with Konqueror. An EeePC and a laptop running Ubuntu don't > have any problems accessing this page with Firefox. > Below is from my /var/log/messages from the time the system was stable to the time I logged back in, after the crash Jul 8 21:16:07 dell2400 dhclient: bound to 192.168.10.54 -- renewal in 1793 seconds. Jul 8 21:17:05 dell2400 restorecond: Will not restore a file with more than one hard link (/etc/resolv.conf) No such file or directory Jul 8 21:17:06 dell2400 gconfd (lanny-3906): Received signal 15, shutting down cleanly Jul 8 21:17:06 dell2400 gconfd (lanny-3906): Exiting Jul 8 21:17:24 dell2400 gconfd (lanny-4631): starting (version 2.14.0), pid 4631 user 'lanny'

4 5

yum-updatesd not working on CentOS 5.2
by Santi Saez 14 Jul '08

14 Jul '08

Dear Srs, yum-updatesd-0.9-2.el5 appears that it's not working on freshly installed CentOS 5.2, using: # rpm -qa "yum*" yum-metadata-parser-1.1.2-2.el5 yum-updatesd-0.9-2.el5 yum-3.2.8-9.el5.centos.2.1 yum-fastestmirror-1.1.10-9.el5.centos I see some bugs ([1], [2] and [3]) in the bug tracker, and more info related to other distros like Fedora, etc.. with the same problem. yum-updatesd does not automatically update in CentOS 5.2, is there any patch for this? anyone using this daemon for Yum? This is the configuration file: # grep -v "#" /etc/yum/yum-updatesd.conf [main] run_interval = 60 updaterefresh = 60 emit_via = email email_to = santi(a)example.com email_from = centos(a)example.com do_update = yes do_download = yes do_download_deps = yes Regards, [1] http://bugs.centos.org/view.php?id=2039 [2] http://bugs.centos.org/view.php?id=2592 [3] http://bugs.centos.org/view.php?id=2560 -- Santi Saez

5 8

How Do I Get Info About New RPMs in Major REPOs
by John Thomas 14 Jul '08

14 Jul '08

I would like to know about new software (rpms) with a general description as they become available in the major repos. Is there a way to get an RSS feed? Currently, I run "yum --enablerepo=* list recent" in cron.daily, but it does not provide a description. I'm like a kid in a candy store with all this great free software. Thank you, by the way! -- Sincerely, John Thomas

4 4

Hardware Compatibility List (looking for a gigabit nic on RHEL4)
by Jason Pyeron 14 Jul '08

14 Jul '08

https://hardware.redhat.com/list.cgi?version=4&internal_whiteboard=Componen… ipheral has no results https://hardware.redhat.com/list.cgi?product=Red+Hat+Hardware+Certification… ksearch=ethernet has a few results for RHEL2.x and one for RHEL4.x on IA64. Where should I start on my quest to find gigabit ethernet cards for all our workstations? -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - - - Jason Pyeron PD Inc. http://www.pdinc.us - - Principal Consultant 10 West 24th Street #100 - - +1 (443) 269-1555 x333 Baltimore, Maryland 21218 - - - -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- This message is for the designated recipient only and may contain privileged, proprietary, or otherwise private information. If you have received it in error, purge the message from your system and notify the sender immediately. Any other use of the email by you is prohibited.

4 4

Best Java code for Centos 5.2s Firefox 3
by Robert Moskowitz 14 Jul '08

14 Jul '08

OK. I just upgraded a test system from 5.1 to 5.2 and there went all of my efforts to get Java working. All those alternative commands that I lost track of what really worked.... So I need the JDK. I have that installed on my main system with some alternatives commands that I do not remember. I do remember (and can find) a thread here to help me on it, and I tried a number of different recommendations until things started working. Was it the last command or a combination of them? Anyway, so here comes the upgrade to firefox 3. On my test system, Java was working with 1.5, and now it is not. So I anticipate the same event here. I need these Java apps working, so before I upgrade, I would like to know what others have found out and recommend.

4 3

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss