Discuss

discuss@lists.centos.org

34753 discussions

md5sum errors in rpms
by Hoy, Mark 18 Mar '08

18 Mar '08

I just noticed that a couple of the updated RPMS have incorrect md5sums compared to the original email. This exists on at least two mirrors: http://centos.take2hosting.com/5.1/updates/i386/RPMS/ http://altruistic.lbl.gov/mirrors/centos/5.1/updates/i386/RPMS/ # md5sum perl-* 7a3f9c4f7c35c23a0751f2b9fc196a21 perl-5.8.8-10.el5_0.2.i386.rpm 135fb1abc0f83fc85885b286ad268a7c perl-suidperl-5.8.8-10.el5_0.2.i386.rpm Is there a list of the md5sums for the entire updates directory? Suggestions welcome. Mark > -----Original Message----- > From: centos-announce-bounces(a)centos.org [mailto:centos-announce- > bounces(a)centos.org] On Behalf Of Karanbir Singh > Sent: Thursday, November 08, 2007 9:33 AM > To: centos-announce(a)centos.org > Subject: [CentOS-announce] CESA-2007:0966 Important CentOS 5 i386 perl > Update > > > CentOS Errata and Security Advisory 2007:0966 Important > > Upstream details at : https://rhn.redhat.com/errata/RHSA-2007-0966.html > > The following updated files have been uploaded and are currently > syncing to the mirrors: ( md5sum Filename ) > > i386: > a471198cb7bbe7896f5c98ed73292ff8 perl-5.8.8-10.el5_0.2.i386.rpm > 45cdbf2cc920b5418a5a00f3e62bfc2d perl-suidperl-5.8.8-10.el5_0.2.i386.rpm > > Source: > aefa042674edc71d8c5bf46812cf296c perl-5.8.8-10.el5_0.2.src.rpm > > > -- > Karanbir Singh > CentOS Project { http://www.centos.org/ } > irc: z00dax, #centos(a)irc.freenode.net > > _______________________________________________ > CentOS-announce mailing list > CentOS-announce(a)centos.org > http://lists.centos.org/mailman/listinfo/centos-announce

2 2

Boot from FC SAN CentOS 5.1 x86-64
by nate 18 Mar '08

18 Mar '08

Anything special needed to boot from a SAN in CentOS 5.1 x86-64 ? We have a new system running a QLA2342 FC HBA connected to a SAN, have a volume exported to it and would like to boot from it. We PXEboot kickstart and that works, the installer sees the disk, installs to it, and reboots. When GRUB tries to load all it prints is "GRUB" and sits there. When we try the Xen edition of CentOS 5.1, when GRUB tries to load the screen goes black and the system reboots. When we try VMWare ESX 3.5.0 it works perfectly, so the BIOS configurations and the SAN config is good, something specific with CentOS 5.1. I see in the release notes that SAN boot is supported, but doesn't give any special instructions. Anyone else booting CentOS directly from a FC SAN ? Any special considerations needed for multipathing and stuff when booting ? thanks nate

2 2

Re: [CentOS] radius WPA
by David G. Miller 18 Mar '08

18 Mar '08

David Hl??ik <david(a)hlacik.eu> wrote: > Hi , will be someone so kind and will provide mi howto, or working > configuration of Acess Point WPA authentification using Radius Server . I > have followed a lot of howtos, unfortunatelly no one works for me. > > Using Centos 5.1 . I put up a blog entry on what I did to get WPA Radius working for me: http://davenjudy.org/wordpress/?p=22 That's with CentOS 5.1 for both the client (HP Laptop) and my server. If you run into something that needs to be different for your setup, post a comment and I'll do my best to find an answer. Cheers, Dave -- Politics, n. Strife of interests masquerading as a contest of principles. -- Ambrose Bierce

1 0

CentOS 5.1 single (server) CD ??
by Chas 18 Mar '08

18 Mar '08

Hi, Any chance of a CentOS 5.1 single server CD similiar to the one for 4.4? That CD wa very useful for 90% of the instals that I've been doing and whatever extras were needed were eaily added through Yum. Chas. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

3 2

CentOS 4.5 - Apache 2.0.52
by Tom Brown 17 Mar '08

17 Mar '08

Hi does the stock apache in CentOS 4.5 - ie 2.0.52 come compiled in 'Pre-Fork' mode? I ask as we have an app that needs to run against apache and this needs to run in 'Worker Mode' as opposed to 'Pre Fork' If this is the case then i guess i will need to rebuild it from the .src.rpm but can anyone let me know for sure? thanks

2 2

Re: [CentOS] remote command execution
by Ross S. W. Walker 17 Mar '08

17 Mar '08

I got the BSD and negate forms mixed up and forgot the &. C:\rsh host "stty -hup; command&" -Ross ----- Original Message ----- From: centos-bounces(a)centos.org <centos-bounces(a)centos.org> To: centos(a)centos.org <centos(a)centos.org> Sent: Mon Mar 17 18:27:58 2008 Subject: Re: [CentOS] remote command execution Use rsh and in the remote command preface it with stty -nohup, like such: C:\rsh <host> "stty -nohup;<command>" This will tell the command to disassociate from the shell. -Ross ----- Original Message ----- From: centos-bounces(a)centos.org <centos-bounces(a)centos.org> To: 'centos(a)centos.org' <centos(a)centos.org> Sent: Mon Mar 17 18:13:48 2008 Subject: [CentOS] remote command execution I need to launch a job remotely from a Windows machine on a CentOS box, the caveat is that I can't maintain a connection once I have initiated the job. Anyone got an idea how I can accomplish this? Thanks! jlc _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos ________________________________ This e-mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution or copying of this e-mail, and any attachments thereto, is strictly prohibited. If you have received this e-mail in error, please immediately notify the sender and permanently delete the original and any copy or printout thereof. ______________________________________________________________________ This e-mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution or copying of this e-mail, and any attachments thereto, is strictly prohibited. If you have received this e-mail in error, please immediately notify the sender and permanently delete the original and any copy or printout thereof.

1 0

Re: [CentOS] remote command execution
by Ross S. W. Walker 17 Mar '08

17 Mar '08

Use rsh and in the remote command preface it with stty -nohup, like such: C:\rsh <host> "stty -nohup;<command>" This will tell the command to disassociate from the shell. -Ross ----- Original Message ----- From: centos-bounces(a)centos.org <centos-bounces(a)centos.org> To: 'centos(a)centos.org' <centos(a)centos.org> Sent: Mon Mar 17 18:13:48 2008 Subject: [CentOS] remote command execution I need to launch a job remotely from a Windows machine on a CentOS box, the caveat is that I can't maintain a connection once I have initiated the job. Anyone got an idea how I can accomplish this? Thanks! jlc _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos ______________________________________________________________________ This e-mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution or copying of this e-mail, and any attachments thereto, is strictly prohibited. If you have received this e-mail in error, please immediately notify the sender and permanently delete the original and any copy or printout thereof.

1 0

remote command execution
by Joseph L. Casale 17 Mar '08

17 Mar '08

I need to launch a job remotely from a Windows machine on a CentOS box, the caveat is that I can't maintain a connection once I have initiated the job. Anyone got an idea how I can accomplish this? Thanks! jlc

3 2

Running CentOS 4.6 domUs on CentOS 5.1 dom0 and domUs crash
by Nathan Grennan 17 Mar '08

17 Mar '08

I have a CentOS 5.1 dom0 running on a machine with two cores and 4gb of memory. It runs three 4.6 domUs and one 5.1 domU. Just out of the blue the other night all the 4.6 domUs crashed, but the dom0 stayed up. I ran xm console (domU-name) and got the Oops information below. I didn't get anything from the 5.1 domU. I think it had been rebooted a few days before and hadn't come up because of a initrd issue. First 4.6 domU: kernel BUG at arch/i386/mm/pgtable-xen.c:306! invalid operand: 0000 [#1] SMP Modules linked in: md5 ipv6 sunrpc dm_mirror dm_mod xennet ext3 jbd xenblk CPU: 0 EIP: 0061:[<c011163a>] Not tainted VLI EFLAGS: 00010282 (2.6.9-55.0.12.ELxenU) EIP is at pgd_ctor+0x1d/0x26 eax: fffffff4 ebx: 00000000 ecx: f5392000 edx: 00000000 esi: c19fdd80 edi: e8f6a700 ebp: 00000001 esp: e0e45de4 ds: 007b es: 007b ss: 0068 Process crond (pid: 32004, threadinfo=e0e45000 task=eb4443f0) Stack: c0141bbd cc57b000 c19fdd80 00000001 cc57b000 e8f6a700 c19fdd80 c19fde40 c0141d3f c19fdd80 e8f6a700 00000001 c19fdd80 e8f6a700 cc57b000 00000010 00000001 000000d0 c1a1b080 0000000c c19fde08 c19fdd80 c0141f2e c19fdd80 Call Trace: [<c0141bbd>] cache_init_objs+0x35/0x56 [<c0141d3f>] cache_grow+0xfb/0x187 [<c0141f2e>] cache_alloc_refill+0x163/0x19c [<c0142149>] kmem_cache_alloc+0x67/0x97 [<c0111671>] pgd_alloc+0x17/0x336 [<c01199d4>] mm_init+0xd7/0x116 [<c01199e4>] mm_init+0xe7/0x116 [<c0119a3d>] mm_alloc+0x2a/0x31 [<c0163097>] do_execve+0x82/0x210 [<c0105d79>] sys_execve+0x2c/0x8e [<c010737f>] syscall_call+0x7/0xb Code: 74 02 66 a5 a8 01 74 01 a4 5e 5b 5e 5f c3 80 3d 04 07 2f c0 00 75 1c 6a 20 6a 00 ff 74 24 0c e8 ce 37 00 00 83 c4 0c 85 c0 74 08 <0f> 0b 32 01 ed 33 27 c0 c3 80 3d 04 07 2f c0 00 75 0d c7 44 24 <0>Fatal exception: panic in 5 seconds Kernel panic - not syncing: Fatal exception Second 4.6 domU: kernel BUG at arch/i386/mm/pgtable-xen.c:306! invalid operand: 0000 [#1] SMP Modules linked in: nfsd exportfs lockd nfs_acl md5 ipv6 sunrpc dm_mirror dm_mod xennet ext3 jbd xenblk CPU: 0 EIP: 0061:[<c011163a>] Not tainted VLI EFLAGS: 00010282 (2.6.9-55.0.12.ELxenU) EIP is at pgd_ctor+0x1d/0x26 eax: fffffff4 ebx: 00000000 ecx: f5392000 edx: 00000000 esi: c19fdd80 edi: e69f4c40 ebp: 00000001 esp: e7282d6c ds: 007b es: 007b ss: 0068 Process nrpe (pid: 1936, threadinfo=e7282000 task=e72cf770) Stack: c0141bbd c7ebb000 c19fdd80 00000001 c7ebb000 e69f4c40 c19fdd80 c19fde40 c0141d3f c19fdd80 e69f4c40 00000001 c19fdd80 e69f4c40 c7ebb000 00000010 00000001 000000d0 c1a1b080 0000000c c19fde08 c19fdd80 c0141f2e c19fdd80 Call Trace: [<c0141bbd>] cache_init_objs+0x35/0x56 [<c0141d3f>] cache_grow+0xfb/0x187 [<c0141f2e>] cache_alloc_refill+0x163/0x19c [<c0142149>] kmem_cache_alloc+0x67/0x97 [<c0111671>] pgd_alloc+0x17/0x336 [<c01199d4>] mm_init+0xd7/0x116 [<c01199e4>] mm_init+0xe7/0x116 [<c0119c8a>] copy_mm+0xbb/0x396 [<c0141f1f>] cache_alloc_refill+0x154/0x19c [<c011aa5a>] copy_process+0x6b5/0xb0b [<c011af9d>] do_fork+0x8a/0x16b [<c020f4c4>] sys_socketcall+0x113/0x202 [<c0105d2c>] sys_clone+0x24/0x28 [<c010737f>] syscall_call+0x7/0xb Code: 74 02 66 a5 a8 01 74 01 a4 5e 5b 5e 5f c3 80 3d 04 07 2f c0 00 75 1c 6a 20 6a 00 ff 74 24 0c e8 ce 37 00 00 83 c4 0c 85 c0 74 08 <0f> 0b 32 01 ed 33 27 c0 c3 80 3d 04 07 2f c0 00 75 0d c7 44 24 <0>Fatal exception: panic in 5 seconds Kernel panic - not syncing: Fatal exception Third 4.6 domU: kernel BUG at arch/i386/mm/pgtable-xen.c:306! invalid operand: 0000 [#1] SMP Modules linked in: md5 ipv6 sunrpc dm_mirror dm_mod xennet ext3 jbd xenblk CPU: 0 EIP: 0061:[<c011163a>] Not tainted VLI EFLAGS: 00010282 (2.6.9-55.0.12.ELxenU) EIP is at pgd_ctor+0x1d/0x26 eax: fffffff4 ebx: 00000000 ecx: f5392000 edx: 00000000 esi: c15fdd80 edi: d3f312e0 ebp: 00000001 esp: ca9c4de4 ds: 007b es: 007b ss: 0068 Process qmail-rspawn (pid: 23442, threadinfo=ca9c4000 task=da68c2b0) Stack: c0141bbd ced8c000 c15fdd80 00000001 ced8c000 d3f312e0 c15fdd80 c15fde40 c0141d3f c15fdd80 d3f312e0 00000001 c15fdd80 d3f312e0 ced8c000 00000010 00000001 000000d0 c1613080 0000000c c15fde08 c15fdd80 c0141f2e c15fdd80 Call Trace: [<c0141bbd>] cache_init_objs+0x35/0x56 [<c0141d3f>] cache_grow+0xfb/0x187 [<c0141f2e>] cache_alloc_refill+0x163/0x19c [<c0142149>] kmem_cache_alloc+0x67/0x97 [<c0111671>] pgd_alloc+0x17/0x336 [<c01199d4>] mm_init+0xd7/0x116 [<c01199e4>] mm_init+0xe7/0x116 [<c0119a3d>] mm_alloc+0x2a/0x31 [<c0163097>] do_execve+0x82/0x210 [<c0105d79>] sys_execve+0x2c/0x8e [<c010737f>] syscall_call+0x7/0xb Code: 74 02 66 a5 a8 01 74 01 a4 5e 5b 5e 5f c3 80 3d 04 07 2f c0 00 75 1c 6a 20 6a 00 ff 74 24 0c e8 ce 37 00 00 83 c4 0c 85 c0 74 08 <0f> 0b 32 01 ed 33 27 c0 c3 80 3d 04 07 2f c0 00 75 0d c7 44 24 <0>Fatal exception: panic in 5 seconds Kernel panic - not syncing: Fatal exception

2 1

CDRW-DVD Mount Problem, Centos 5.1, Intel board...
by Pam Astor 17 Mar '08

17 Mar '08

I'm having a problem mounting my new CDRW DVD in my new machine I just built. The motherboard is an Intel DP35DP, and I connected the CDRW DVD via ribbon cable into the motherboard IDE slot. Centos 5.1 is installed and functioning fine so far (other than this problem). I can't mount the CDRW-DVD unit. I was able to run cdrecord with the command: cdrecord -v speed=2 dev=6,0,0 -data /home/mydir/Desktop/backup_bootimage.iso to copy a file that I downloaded, apparently the data copy went fine, but when I ejected the CD and then tried to re mount the same CD to read the file, it would not mount. So then I tried mounting the Centos 5.1 distro disk that I used to install the OS, and am having the same problem with the distro disk. If anyone could give me some suggestions or insights I'd appreciate it. I have provided some data below. I tried the below commands after ejecting the CD and then executing the commands while the drawer is open, and I got the below outputs: # sudo mount -t iso9660 /dev/sr0 /mnt/cdrom mount: special device /dev/sr0 does not exist And: # mount /dev/cdrom /mnt/cdrom mount: block device /dev/cdrom is write-protected, mounting read-only mount: you must specify the filesystem type And: # mount /dev/scd0 /mnt/cdrom mount: block device /dev/scd0 is write-protected, mounting read-only mount: you must specify the filesystem type And: #sudo mount -t iso9660 /dev/scd0 /mnt/cdrom mount: block device /dev/scd0 is write-protected, mounting read-only mount: wrong fs type, bad option, bad superblock on /dev/scd0, missing codepage or other error In some cases useful info is found in syslog - try dmesg | tail or so And: sudo mount -t iso9660 /dev/scd0 /mnt/cdrom -o ro,unhide mount: wrong fs type, bad option, bad superblock on /dev/scd0, missing codepage or other error In some cases useful info is found in syslog - try dmesg | tail or so And: sudo mount -t iso9660 /dev/sr0 /mnt/cdrom -o ro,unhide mount: special device /dev/sr0 does not exist Here is info from cat /etc/fstab, cat /proc/mounts, fdisk -l, and cdrecord -scanbus and dmesg | grep -i -e CD -e CD-ROM respectively: >From cat/etc/fstab: /dev/VolGroup00/LogVol00 / ext3 defaults 11 LABEL=/boot /boot ext3 defaults 1 2 tmpfs /dev/shm tmpfsdefaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs/sys sysfs defaults 0 0 proc /proc proc defaults 00 /dev/VolGroup00/LogVol01 swap swap defaults 0 0 >From cat /proc/mounts: [root@localhost/]# cat /proc/mounts rootfs / rootfs rw 0 0 /dev/root / ext3rw,data=ordered 0 0 /dev /dev tmpfs rw 0 0 /proc /proc proc rw0 0 /sys /sys sysfs rw 0 0 none /selinux selinuxfs rw 00 /proc/bus/usb /proc/bus/usb usbfs rw 0 0 devpts /dev/ptsdevpts rw 0 0 /dev/sda1 /boot ext3 rw,data=ordered 0 0 tmpfs/dev/shm tmpfs rw 0 0 none /proc/sys/fs/binfmt_misc binfmt_misc rw0 0 sunrpc /var/lib/nfs/rpc_pipefs rpc_pipefs rw 00 /etc/auto.misc /misc autofsrw,fd=6,pgrp=2758,timeout=300,minproto=5,maxproto=5,indirect 00 -hosts /net autofsrw,fd=11,pgrp=2758,timeout=300,minproto=5,maxproto=5,indirect 00 fdisk -l Disk /dev/sda: 500.1 GB, 500107862016bytes 255 heads, 63 sectors/track, 60801 cylinders Units =cylinders of 16065 * 512 = 8225280 bytes Device Boot Start EndBlocks Id System /dev/sda1 * 1 13 104391 83 Linux /dev/sda2 1460801 488279610 8e Linux LVM Disk /dev/sdb: 500.1 GB,500107862016 bytes 255 heads, 63 sectors/track, 60801cylinders Units = cylinders of 16065 * 512 = 8225280 bytes DeviceBoot Start End Blocks Id System /dev/sdb1 * 1 60801 488384001 8eLinux LVM >From cdrecord -scanbus: scsibus6: 6,0,0 600) 'TSSTcorp''CDDVDW SH-S202J ' 'SB00' Removable CD-ROM 6,1,0 601) * 6,2,0602) * 6,3,0 603) * 6,4,0 604) * 6,5,0 605) * 6,6,0 606)* 6,7,0 607) * >From dmesg | grep -i -e CD -e CD-ROM: [root@localhost etc]# dmesg | grep -i -e CD -e CD-ROM uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1a.0: irq 193, io base 0x000030e0 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.1: irq 74, io base 0x000030c0 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.2: irq 177, io base 0x000030a0 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.0: irq 82, io base 0x00003080 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.1: irq 201, io base 0x00003060 usb 2-1: new low speed USB device using uhci_hcd and address 2 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.2: irq 193, io base 0x00003040 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: irq 177, io mem 0xe3225c00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: irq 82, io mem 0xe3225800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb 2-1: new low speed USB device using uhci_hcd and address 3 usb 3-2: new low speed USB device using uhci_hcd and address 2 Vendor: TSSTcorp Model: CDDVDW SH-S202J Rev: SB00 Type: CD-ROM ANSI SCSI revision: 05 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 6:0:0:0: Attached scsi CD-ROM sr0 cdrom: This disc doesn't have any tracks I recognize! sr0: CDROM not ready. Make sure there is a disc in the drive. sr0: CDROM not ready. Make sure there is a disc in the drive. sr0: CDROM not ready. Make sure there is a disc in the drive. sr0: CDROM not ready. Make sure there is a disc in the drive. sr0: CDROM not ready. Make sure there is a disc in the drive. sr0: CDROM not ready. Make sure there is a disc in the drive. sr0: CDROM not ready. Make sure there is a disc in the drive. sr0: CDROM not ready. Make sure there is a disc in the drive. sr0: CDROM not ready. Make sure there is a disc in the drive. sr0: CDROM not ready. Make sure there is a disc in the drive. sr0: CDROM not ready. Make sure there is a disc in the drive. sr0: CDROM not ready. Make sure there is a disc in the drive. sr0: CDROM not ready. Make sure there is a disc in the drive. sr0: CDROM not ready. Make sure there is a disc in the drive. sr0: CDROM not ready. Make sure there is a disc in the drive. sr0: CDROM not ready. Make sure there is a disc in the drive. sr0: CDROM not ready. Make sure there is a disc in the drive. sr0: CDROM not ready yet. sr0: CDROM not ready yet. sr0: CDROM not ready yet. sr0: CDROM not ready yet. sr0: CDROM not ready yet. sr0: CDROM not ready yet. sr0: CDROM not ready yet. sr0: CDROM not ready. Make sure there is a disc in the drive. sr0: CDROM not ready. Make sure there is a disc in the drive. sr0: CDROM not ready. Make sure there is a disc in the drive. sr0: CDROM not ready. Make sure there is a disc in the drive. ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss