Discuss

discuss@lists.centos.org

34758 discussions

Port 631 closed, not hidden
by Miark 23 Nov '07

23 Nov '07

I have the firewall turned on my CentOS 5 box, but GRC is reporting that 631 is closed instead of stealthed. If the firewall isn't configured to allow that, then why might that be happening? Miark

6 9

Bugzilla Install problems - need last mile help
by Scott Ehrlich 23 Nov '07

23 Nov '07

I've freshly installed CentOS 5 32-bit on a pc, performed a yum update and yum upgrade. I then did a yum install of mysql. I finally picked up fresh copies of phpmysql and bugzilla and put both in my /var/www/html directory. mysql is running. I am able to use mysql -u root to get into it, and phpmysql is able to get it, too. After runs of checksetup.pl to ensure all required pre-requisites were installed, I ran it one more time, and get the following: Creating database bugs... The 'bugs' database could not be created. The error returned was: Access denied for user ''@'localhost' to database 'bugs' This might have several reasons: * MySQL is not running. * MySQL is running, but there is a problem either in the server configuration or the database access rights. Read the Bugzilla Guide in the doc directory. The section about database configuration should help. * Your password for the 'bugs' user, specified in $db_pass, is incorrect, in './localconfig'. * There is a subtle problem with Perl, DBI, or MySQL. Make sure all settings in './localconfig' are correct. If all else fails, set '$db_check' to 0. [root@localhost bugzilla]# What do I need to do next? I tried creating an empty database called bugs for the script to hook into, but no luck. I tried creating a user bugs with full permission, but no luck. Thanks for any leads. Scott

2 2

wget'ing files relative paths?
by Rogelio 23 Nov '07

23 Nov '07

I'm trying to wget some very specific files off a web page, but some of the paths are relative paths (e.g. ../path/to/file) rather than abosolute (e.g. http://direct/path/to/file ). Obviously, when wget gets to that part, it craps out... Is there a switch in wget (in CentOS 5 - latest wget package) that lets me maintain this session? I tried some of the options here (http://www.gnu.org/software/wget/manual/html_node/HTTP-Options.html ), but it's not working, and I'm hoping someone here might point me in the right direction.

2 3

Error on installing fuse-ntfs-3g
by Ern jura 23 Nov '07

23 Nov '07

I get the following error when I try installing fuse-ntfs-3g even though I have installed fuse-2.7 and fuse-kmdl-2.7 error: Failed dependencies: libfuse.so.2 is needed by fuse-ntfs-3g-1.913-1.el5.rf.i386 libfuse.so.2(FUSE_2.2) is needed by fuse-ntfs-3g-1.913-1.el5.rf.i386 libfuse.so.2(FUSE_2.5) is needed by fuse-ntfs-3g-1.913-1.el5.rf.i386 libfuse.so.2(FUSE_2.6) is needed by fuse-ntfs-3g-1.913-1.el5.rf.i386

5 6

perl 5.8.5-36.el4_5.2
by Tom 23 Nov '07

23 Nov '07

Hi all, Since upgrading to perl 5.8.5-36.el4_5.2 I have had no end of problems, starting with needing compress::zlib which I got from rpmforge, then I had to reinstall scalar::util to get mailscanner working but now I can't install or upgrade any perl modules. Has anyone else had problems or can someone tell me what I've done wrong please? regards tom

7 18

webserver setup
by Andreas Kuntzagk 23 Nov '07

23 Nov '07

Hi, I have setup a webserver on CentOS 4.5 with NameVirtualHost. Two VirtualHost should be reachable by port 80 from outside, while the third (default) should be only reachable by https from outside but by http from inside. Since all share the same IP firewalling seems to be out of question. So is there a way to restrict that in Apache config? regards, Andreas

4 4

Package pxljr-1.1-1.i386.rpm (from kde.repo) is not signed
by Andrew Allen 22 Nov '07

22 Nov '07

I'm trying to install the driver for an HP Colour Laserjet 3500 in CentOS 5. I've installed the kde.repo (with appropriate priorities set up), but when I try yum install pxljr-1.1-1.i386.rpm, I get the above message that 'the package is not signed'. I've previously tried running yum localinstall on the downloaded package with the same result. How do I resolve this please? Andy

1 0

perl-base and perl-file-scan-clamav and perl dependency error re 5.8.8 ???
by Robert - elists 22 Nov '07

22 Nov '07

Happy gobble gobble day! Server is a mail and web box with latest centos 4 upgrades and has been running and stable for probably over two years Machine has perl 5.8.8 on it. For a coupla days I have been trying to follow these basic instructions so that I can run a test. http://wiki.apache.org/spamassassin/ClamAVPlugin Now, the issue I am running into is that I needed to get a file-scan-clamav perm module in rpm So I opened up browser and search for "file-scan-clamav perl dag rpm" and found some choices Eventually I end up with this file http://rpm.pbone.net/index.php3/stat/4/idpl/3851508/com/perl-File-Scan-ClamA V-1.8-1mud2007.0.noarch.rpm.html then when I try to install it says I need perl-base so I search and goto http://dag.wieers.com/rpm/packages/perl-base/ now... when I install perl-base and then goto install the file-scan-clamav rpm I get this... yum localinstall perl-File-Scan-ClamAV-1.8-1mud2007.0.noarch.rpm Setting up Local Package Process Examining perl-File-Scan-ClamAV-1.8-1mud2007.0.noarch.rpm: perl-File-Scan-ClamAV - 1.8-1mud2007.0.noarch Marking perl-File-Scan-ClamAV-1.8-1mud2007.0.noarch.rpm to be installed Resolving Dependencies --> Populating transaction set with selected packages. Please wait. ---> Package perl-File-Scan-ClamAV.noarch 0:1.8-1mud2007.0 set to be updated --> Running transaction check Setting up repositories update 100% |=========================| 951 B 00:00 base 100% |=========================| 1.1 kB 00:00 addons 100% |=========================| 951 B 00:00 extras 100% |=========================| 1.1 kB 00:00 Reading repository metadata in from local files Excluding Packages in global exclude list Finished Excluding Packages in global exclude list Finished --> Processing Dependency: perl-base >= 2:5.8.8 for package: perl-File-Scan-ClamAV --> Finished Dependency Resolution Error: Missing Dependency: perl-base >= 2:5.8.8 is needed by package perl-File-Scan-ClamAV at this point, I was wondering what I specifically need to do. So, I tried rebuilding perl-base and installing it yet it asked to be signed so I have to figure that part out and if it will solve this. Is that what the error is about in regards to perl-base >= 2:5.8.8 Or am I missing something else? Dag, would you consider putting File::Scan::ClamAV rpm on your site please? Thanks and kind regards! - rh

1 0

Migration from RH9
by Ugo Bellavance 22 Nov '07

22 Nov '07

Hi, I will probably have to migrate a few servers running Red Hat 9 to CentOS and I'd like to have opinions. One server to migrate is running Fedora core 4. Reason for migrating to CentOS: no more security updates available, hardware change planned anyway. Here are the services to be migrated: sendmail pop (not sure which daemon, I think it is running the default daemon in RH9) DNS apache+PHP website FTP Dansguardian Samba Perforce Squid I haven't seen any directories like LDAP or windows Active Directory, so I assume for now that all authentication is done locally. Anyone has experience with that? I'm not too scared about sendmail, Bind, apache/PHP (except that maybe the PHP upgrade may break the website, but this is easily managed and can be tested), ftp. However, I don't know dansguardian much, but I guess it would be a good idea to integrate it with squid. I don't know squid much, but depending on what they're doing with it, it should be fairly simple. For samba, are there major changes between the default version in RH9 and Centos4 or 5? Anyone migrated a perforce environment? I'm also wondering whether I migrate them to centos3, 4, or 5. 3 would be to make the transition easier, while still letting them have many years of security updates. 4 is the version I use most, I barely touched 5. 5 would be for xen and... your ideas? I usually use OpenVZ for virtualization, but they might want to virtualize windows servers too, which OpenVZ can't do. Any input would be appreciated, Regards, Ugo

4 7

resize an image file
by Jerry Geis 22 Nov '07

22 Nov '07

I have a 100G disk on an old redhat 7.3 system. Filesystem Size Used Avail Use% Mounted on /dev/hda1 9.6G 2.4G 6.7G 27% / /dev/hda3 99G 6.1G 88G 7% /home hda2 is 2G swap I am trying to back that complete image up on my centos 5 system. I can do the dd if=/dev/hda bs=1M | ssh root@machine 'cat > disk.img' which gets me the whole 100G. As you can see most of the disk is unused. Is there a way to trim the resulting image to only be 10G instead of 100G? Thanks, Jerry

7 9

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss