Discuss

discuss@lists.centos.org

34753 discussions

Proftpd log errors - retrying please.
by Steve Campbell 20 Nov '07

20 Nov '07

I am using proftpd with my first Centos 5 box. Although it appears to be working, I see the following errors in my logwatch reports. Deprecated pam_stack module called from service "proftpd" pam_unix(proftpd:session): session opened for user steve by (uid=0) Deprecated pam_stack module called from service "proftpd" Deprecated pam_stack module called from service "proftpd" pam_env(proftpd:setcred): Unable to open config file: /etc/security/pam_env.conf: No such file or directory The file /etc/security/pam_env.conf does exist, but is owned by root with 644 permissions. I may change those, but for now I would like to hear from anyone before I do. I have googled to no avail, although I find a lot of references to this - just no definitive answer. I'm running the rpms 1.3.1-5 that I picked up from Dag's site. I tried here before and saw no replies, so pardon me for attempting again or if I missed previous postings. Thanks for any assistance. Steve Campbell

2 1

openntp, mod_deflate, and mod_security CentOS5 rpms?
by Dave 20 Nov '07

20 Nov '07

Hello, Has anyone made any of the above in to CentOS5 rpms? I've googled and not found any CentOS5 rpms and was wondering before i atempt to make them, was wondering if anyone else had any of them? Thanks. Dave.

3 2

Re: [CentOS] Dual boot box: WinXP & CentOS 5: ImpossibletorestoreWinXP?
by Ross S. W. Walker 20 Nov '07

20 Nov '07

I should have asked how big your setup was currently. Oh well, yes the Windows apps take a while to install, been there myself. If I were to re-do the whole drive, not knowing it's size I might do it as such: /dev/sda - standard 100MB boot /dev/sdb - 90% of remaining space as an LVM PV /dev/sdc - remaining space as future Windows volume In the LVM VG formed from /dev/sdb, create a / lv of say 8GB, a swap lv of say 2GB and a /home lv of say 16GB, save whatever is left for additional storage, maybe for shared files (/shared) or commercial apps (/opt) or whatever. The sizes are simply suggestions, but try to not allocate all free space. You can then install Windows from within vmware by making /dev/sdc a raw disk for vmware. Once it's installed you could add an entry in grub to boot into it. If you just want to access it from vmware you could forgo /dev/sdc and just create another lv for windows, but if you want to play directX games I think you will be out of luck. To use Xen hardware virtualization you will need a recent processor that supports it, there is a flag in cpuinfo that can tell you if it does I forget which one it is. Google will tell you or some kind soul on the list will volunteer it. -Ross -----Original Message----- From: centos-bounces(a)centos.org <centos-bounces(a)centos.org> To: CentOS Mailing List <centos(a)centos.org> Sent: Tue Nov 20 08:34:47 2007 Subject: Re: [CentOS] Dual boot box: WinXP & CentOS 5: ImpossibletorestoreWinXP? On Monday, 19 November 2007, "Ross S. W. Walker" <rwalker(a)medallion.com> wrote: <snip> >I wouldn't necessarily wipe the whole HD, just the windows partition. Ross: That would be a little faster. It would take me about 2-3 additional hours, to reinstall CentOS5 and restore everything. Installing Windows and it's applications it *VERY* time consuming. But, if I dont redo my CentOS installation, I won't have room for VMware Server. I won't have time to do this for 2 or 3 days, so I still have time to decide on the path to take. :-) Minimum, I will wipe MS Windows and install it with the new English language CD I got from Dell last week. >You could also use Xen in CentOS 5 for your Windows virtualization. I'd wait for 5.1 though which will be more refined then version 5. Does Xen require a special CPU or motherboard? Thanks much, for all of your ideas! Lanny _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos ______________________________________________________________________ This e-mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution or copying of this e-mail, and any attachments thereto, is strictly prohibited. If you have received this e-mail in error, please immediately notify the sender and permanently delete the original and any copy or printout thereof.

1 0

Re: [CentOS] ntp queries not being answered
by Nicolas Sahlqvist 20 Nov '07

20 Nov '07

Ok, so it was indeed the firewall, thanks for letting me know! :) (CCing the centos list in order to close the subject there too) - Nicolas On Nov 20, 2007 3:23 PM, Engineer, Gaurav <gaurav.engineer(a)lmco.com> wrote: > This worked like a charm. Thanks for all the help! > > > -----Original Message----- > From: Nicolas Sahlqvist [mailto:nicco77@gmail.com] > Sent: Tuesday, November 20, 2007 8:36 AM > To: Engineer, Gaurav > Subject: Re: [CentOS] ntp queries not being answered > > Hi Gaurav, > > You can check the output of "iptables -L -n" or use "setup" and check > out what "Security Level" is set to under "Firewall configuration". In > case it's enabled, you can disable it or add "Other ports" under > "Customize". > > > - Nicolas > > > On Nov 20, 2007 2:20 PM, Engineer, Gaurav <gaurav.engineer(a)lmco.com> > wrote: > > Thanks for the reply Nicolas. > > > > I was thinking it was something dealing with security that might be > > the problem. Unfortunately, I am totally new to Centos and linux. We > > > have another team that is responsible for loading processors with the > OS. > > > > So nothing was done besides the initial base loading of the SW and > > configuring the IP address. > > > > Can you please tell me how to deactivate the firewall (iptables) on > > the linux box? How to activate the ntp port? > > > > > > -----Original Message----- > > From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On > > Behalf Of Nicolas Sahlqvist > > Sent: Tuesday, November 20, 2007 8:14 AM > > To: CentOS mailing list > > Subject: Re: [CentOS] ntp queries not being answered > > > > On Nov 20, 2007 2:05 PM, Engineer, Gaurav <gaurav.engineer(a)lmco.com> > > wrote: > > > > > > > > > > > > Hello All, > > > > > > > > > > > > My name is Gaurav, and I am tasked with configuring a linux box with > > NTP. > > > > > > I am having a problem that I hope you can help me with. > > > > > > We have installed CentOS V5 on 1 processor down in the lab. The > > > rest > > of the > > > processors on the network are AIX boxes versions 3.2.5 and 5.2. I > > worked > > > through the entire initial NTP configuration; setup the > > > /etc/ntp.conf > > file > > > to point to the server, etc. > > > > > > Now when I run the ntpdate -d <address of server> on the linux box I > > get all > > > the right information. > > > > > > Also, when I run the same command with the address for another > > non-linux box > > > (AIX): ntpdate -d <address of non-linux box> I get all the right > > information > > > again. > > > > > > The problem is that the linux box does not answer queries of the > > command to > > > it. > > > > > > So if I enter the following on the non-linux box: > > > > > > Ntpdate -d <address of linux box>... all the values for offset, etc. > > are all > > > zeroed out. So the linux box is not passing any information back to > > the > > > querying processor, even though the command works the other way > > (executed on > > > the linux box querying the non-linux box). Also, I don't see the > > usual > > > "transmit....recieve" pattern for the command.... just the > > "transmit...transmit...". > > > > > > Are there any reasons that the box can query the server and other > > boxes > > > successfully, but not answer queries sent to it? > > > > > > And in an effort to troubleshoot, I have commented out everything in > > the > > > /etc/ntp.conf file except the server address to see if there was > > something > > > in that file causing the problems, but that didn't work either. > > > > > > > > > > > > Do you have any information on this that could help me? Anything at > > all > > > would be appreciated. > > > > Hi Gaurav, > > > > Have you ensured that the firewall (iptables) are deactivated or got > > the ntp port open for ntp queries from the AIX boxes? > > > > > > - Nicolas > > _______________________________________________ > > CentOS mailing list > > CentOS(a)centos.org > > http://lists.centos.org/mailman/listinfo/centos > > >

1 0

wall and mesg and Xwindow
by Robert 20 Nov '07

20 Nov '07

I read in another post this morning something that reminded me of a question that has left my pulling my eyebrows out. How are broadcast messages enabled in X? I have found that # mesg y at a console will enable wall to post to that console. And, by placing "mesg y" in /etc/rc.d/rc.local, messages will be enabled on all consoles. But they're not enabled in KDE, neither in a pop-up nor in a terminal. So far, I've been unable to find what changed between CentOS 4 and CentOS 5 (and equivalent upstream versions, obviously). Would someone share a clue?

1 0

Remastering CentOS
by Mas'ud Ulum® 20 Nov '07

20 Nov '07

Hi All, Does anyone can help me about remastering CentOS. i try to remaster it. but i cannot get rpm so my ISO is only bootable disk.

2 1

Re: [CentOS] Dual boot box: WinXP & CentOS 5: Impossible torestoreWinXP?
by Lanny Marcus 20 Nov '07

20 Nov '07

On Monday, 19 November 2007, "Ross S. W. Walker" <rwalker(a)medallion.com> wrote: <snip> >I wouldn't necessarily wipe the whole HD, just the windows partition. Ross: That would be a little faster. It would take me about 2-3 additional hours, to reinstall CentOS5 and restore everything. Installing Windows and it's applications it *VERY* time consuming. But, if I dont redo my CentOS installation, I won't have room for VMware Server. I won't have time to do this for 2 or 3 days, so I still have time to decide on the path to take. :-) Minimum, I will wipe MS Windows and install it with the new English language CD I got from Dell last week. >You could also use Xen in CentOS 5 for your Windows virtualization. I'd wait for 5.1 though which will be more refined then version 5. Does Xen require a special CPU or motherboard? Thanks much, for all of your ideas! Lanny

1 0

ntp queries not being answered
by Engineer, Gaurav 20 Nov '07

20 Nov '07

Hello All, My name is Gaurav, and I am tasked with configuring a linux box with NTP. I am having a problem that I hope you can help me with. We have installed CentOS V5 on 1 processor down in the lab. The rest of the processors on the network are AIX boxes versions 3.2.5 and 5.2. I worked through the entire initial NTP configuration; setup the /etc/ntp.conf file to point to the server, etc. Now when I run the ntpdate -d <address of server> on the linux box I get all the right information. Also, when I run the same command with the address for another non-linux box (AIX): ntpdate -d <address of non-linux box> I get all the right information again. The problem is that the linux box does not answer queries of the command to it. So if I enter the following on the non-linux box: Ntpdate -d <address of linux box>... all the values for offset, etc. are all zeroed out. So the linux box is not passing any information back to the querying processor, even though the command works the other way (executed on the linux box querying the non-linux box). Also, I don't see the usual "transmit....recieve" pattern for the command.... just the "transmit...transmit...". Are there any reasons that the box can query the server and other boxes successfully, but not answer queries sent to it? And in an effort to troubleshoot, I have commented out everything in the /etc/ntp.conf file except the server address to see if there was something in that file causing the problems, but that didn't work either. Do you have any information on this that could help me? Anything at all would be appreciated. -thanks.

2 1

Remastering CentOS
by Mas'ud Ulum® 20 Nov '07

20 Nov '07

Hi, i try to remastering CentOS. i try do step by step from http://www.centos.org/modules/newbb/viewtopic.php?forum=34&topic_id=789&vie… why when i create ISO. i just get bootable disk. i cannot get rpm2 that i have installed. am i supposed to including manually rpm's what i want into ISO directory then make ISO or mkisofs repackage automatically? thx

2 1

Xen and multiple block devices
by Francois Caen 20 Nov '07

20 Nov '07

Hello, CentOS 5.0 on x86_64 I'm trying to set up Xen paravirt guests with access to 2 block devices: One for / and one for swap. The block devices are LVM LVs, but that shouldn't matter. When I create the guest using either virt-manager or virt-install, I get asked which device to use for xvda. But I want more block devices: xvdb for swap. I know how to add this as an option to the config file in /etc/xen 'phy:/dev/vg1/guest1-swap,xvdb,w' But that file only appears AFTER running the installer. How do I make xvdb visible DURING the install of CentOS? Thanks, -- Francois Caen

1 1

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss