Discuss

discuss@lists.centos.org

34758 discussions

Re: [CentOS] centos5 iptables expert needed
by Lanny Marcus 30 Aug '07

30 Aug '07

On 28 August 2007, John Plemons <john(a)mavin.com> wrote: <snip> > You might try loading a copy of Webmim onto your linux box, there is a > Firewall module that will make changing and setting up the routing > very easy and quick to understand... > > www.webmim.com > webmin-1.360-1.noarch.rpm > There is a simple RPM install that works with Centos... Three comments about webmin: (a) There is a huge (800 pages?) manual for webmin in .pdf format, available for download from the webmin web site. (b) I installed it on my Desktop (CentOS 5.0) a couple of weeks ago and I ran into a problem, because I have SELinux running in Permissive Mode. I first submitted to Bugzilla at Upstream and he tracked it down to Webmin, so I moved the bug to sourceforge: <https://sourceforge.net/tracker/?func=detail&atid=117457&aid=1781101&group_…> This is what Jamie wrote: > Ok, thanks ... I see the problem. Webmin opens the log file > /var/webmin/miniserv.error and connects STDERR to it, then runs other > commands like iptables, which inherits the STDERR file descriptor. > This is generally a good thing, as any error output from the iptables > command will go to that log file. > > But with selinux enabled, this fails as iptables doesn't have the > security context needed to write to that file. > Is there a chcon option or other command that can allow a file to be > written by any process? If so, I should update Webmin to run that on > the error log file. > ASAP, I will get back to him and I'm sure he will solve the problem. :-) (c) It is my belief (others, with much more webmin experience can confirm or reject this thought), that webmin will be more reliable, when it changes configuration files, than many of the GUI's from Upstream.

1 0

What is eating my memory?
by Robert Moskowitz 30 Aug '07

30 Aug '07

The tail of two systems and one hard drive. I install centos 5 on a HD while it is in a Compaq with 256Mb memory. After install, i am in graphics mode (Gnome) and top reports not quite all 256Mb used. Then I move the HD to a decTOP with 512Mb memory. I am running non-graphics (init 3). I ssh into the unit and top reports not quite all of that used..... So what ate up more than 256Mb memory (X is not running)? Perhaps there is something I did not clean up properly wrt the move.

5 7

POS system
by david chong 30 Aug '07

30 Aug '07

Hi All, I am looking for a Point Of Sales software which can run on centos5, does anyone have good pointer for this. It's for an organic shop open by a non-profit organization. I am helping to set it up. Sorry if I am out of topic, I am following this list this few months and find it very helpful. Just hope to get some help. Thanks in advance. David

3 3

Seeds for Centos 4.5 (s390) bittorrent
by mike＠securityfolk.com 30 Aug '07

30 Aug '07

Hello, I would like to download the DVD image for the s390x hardware - could someone seed the torrent or point me to an image I can download? Thanks, Mike.

3 4

OT: Suggestions for RAID HW for 2 SATA drives in Dell PowerEdge SC
by Lanny Marcus 30 Aug '07

30 Aug '07

Looking at the Dell PowerEdge 440SC web page for Colombia. The box will have two 250 GB SATA drives. The HD controller is: SAS 5IR SAS,Internal Raid Adapter (SAS5IR) for HD Configuration) the options are: (1) Add-in SAS5iR (SATA/SAS Controller)-RAID 0 (ASASR0) (2) Onboard SATA, 2 Drives connected to Onboard SATA Controller No RAID (MST2) (3) Add-in SAS5iR (SATA/SAS Controller) which supports 1-2 Hard Drives-No RAID (ASAS) (4) Add-in SAS5iR (SATA/SAS Controller)-RAID 1 (ASASR1) Apparently the cost for them is the same. Option 1 (RAID 0) or Option 4 (RAID 1)? Suggestions solicited! TIA, Lanny BTW: I plan to put CentOS on it. If Dell installs Linux, with 1 year support, down here they charge: (a) Red Hat Enterprise Linux ES 4, 1 year subscription to Red Hat Network, English (RH4ES1) [about US$400] (b) SUSE Linux Enterprise Server 10, 1 CPU, 1 YR Subscription, FI (SL101S1) [about US$160]

4 3

MIssing Log Entries in /var/log/messages
by Frank Jahn 30 Aug '07

30 Aug '07

Hello, has something changed in CentOS 5 logging behavior? I get no entries in /var/log/messages when I start or stop services (httpd, ssh, etc.). My /etc/syslog.conf is the installation default: # Log all kernel messages to the console. # Logging much else clutters up the screen. #kern.* /dev/console # Log anything (except mail) of level info or higher. # Don't log private authentication messages! *.info;mail.none;authpriv.none;cron.none /var/log/messages # The authpriv file has restricted access. authpriv.* /var/log/secure # Log all the mail messages in one place. mail.* -/var/log/maillog # Log cron stuff cron.* /var/log/cron # Everybody gets emergency messages *.emerg * # Save news errors of level crit and higher in a special file. uucp,news.crit /var/log/spooler # Save boot messages also to boot.log local7.* /var/log/boot.log Any Ideas? Best regards Frank Jahn

1 0

mod_auth_external and pwauth
by Kenneth Porter 30 Aug '07

30 Aug '07

Is anyone packaging these for CentOS5? Alternatively, is there a preferred way to authenticate a web user against the password database? <http://unixpapa.com/mod_authnz_external/>

1 0

Fwd: Nautilus does not open files with the correct app - SOLVED
by Mark Hull-Richter 29 Aug '07

29 Aug '07

>---------- Forwarded message ---------- >From: Nicola Buso <nicola.buso(a)gmail.com> >Date: Aug 29, 2007 3:26 PM >Subject: Re: Nautilus does not open files with the correct app >To: Mark Hull-Richter <mhullrich(a)gmail.com> > >I had similar problem with nautilus opening pdf documents from root and not from a normal >user (showing a message saying that for security reason the file will be not opened). To >resolve I removed the ~/.local/share/mime folder. This folder is a cache of mime infos, >removing it nautilus will use system configuration instead of local one (this work on my box). > >Hoping this help! That was it. mhr

1 0

Trying to understand Remote desktops
by Robert Moskowitz 29 Aug '07

29 Aug '07

This is something that has been long overdue for me to set up, and how I am looking it hard in the face. Back in '94, I was doing REAL X-Terminals into UNIX systems. Watching simple mouse meanderings eat up all available bandwidth, and forget it if you resized a window and had to download the new font..... So here we are, in the modern times with GNOME (I chose that over KDE, because), and Open Office, Thunderbird, and lots of other nice graphical apps. I want to run the apps on an app server and access them for a thin client. I am familiar with the K12TLSP project, but right now I want to see what I can do myself. What is the minimum X install for the server to run Open Office with the only graphical usage the remote client? I well learned back in '91 when I started with TCP/IP, the TCP Client/Server model and how X-Windows and SNMP ran 'backwards'. That is your device was the Server and the device with the data/app was the client. So in theory, all I would need to have on the Centos Apps server is the X and Gnome client parts and some remote server (like XRDP)? I have the test box sitting here, ready to run an install.... I think it would be so cool, to see my Gnome desktop from the apps server running on my little old Libretto running DSL.

12 33

Stage2.img
by semi linux 29 Aug '07

29 Aug '07

I've got a RAID card (3ware 9650SE-2LP) that wasn't supported by the in-kernel driver until 2.6.19+ Since CentOS 5.0 is based on 2.6.18-8.el5 is was looking for a way to incorporate their driver from the website so I wouldn't have to use the "linux dd" kernel option all the time. (trying to automate as much as possible using kickstart, scripts, etc). Through reading about other OSes I've found that the most common way to do this would be to modify the stage2.img file on the boot DVD and add the driver to the boot kernel image. The problem is, I can't mount the stage2.img file using cramfs. # mount -o loop -t cramfs stage2.img /mnt mount: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or other error In some cases useful info is found in syslog - try dmesg | tail or so Any suggestions? or should I try going about this another way? - G

3 5

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss