Discuss

discuss@lists.centos.org

34753 discussions

PostgreSQL 8.2?
by Benjamin Smith 23 Jan '07

23 Jan '07

I've been using RPMs for PG 8.1 from CentosPlus for some time now. I've been very happy with them, and they've been wonderfully stable. http://mirror.centos.org/centos/4/centosplus/x86_64/RPMS/ But now 8.2 is out. Are there any plans to support PG 8.2 in CentosPlus, or should I go ahead with RPMS directly from PG? http://www.postgresql.org/ftp/binary/v8.2.1/linux/rpms/redhat/rhel-as-4-x86… Thanks, -Ben -- "The best way to predict the future is to invent it." - XEROX PARC slogan, circa 1978

3 3

OOT: Advice on failover rsync setup
by Fajar Priyanto 23 Jan '07

23 Jan '07

Hi all, I have a task on setting up a cluster of 2 servers for providing ftp service. We use RH's Cluster suite. However the cluster setup is lack of shared network storage, so the /var/ftp/pub is mounted on each server. The cluster is set with Master and Slave configuration (when the master is down, slave serves. and when master is up again, slaves gives up the service back to master). We thought of using rsync to synchronize the two directory on each server. B -----> A with: rsync -avzgorp -e ssh root@serverB:/var/ftp/pub/ /var/ftp/pub/ A -----> B with: rsync -avzgorp --delete -e ssh /var/ftp/pub/ root@serverB:/var/ftp/pub/ (note: using --delete) We want those command to make sure that the most current and complete /var/ftp/pub is on A and we put those command on A only. So, are we on the right direction? Or is there any better way? Thank you very much, -- Fajar Priyanto | Reg'd Linux User #327841 | Linux tutorial http://linux2.arinet.org 3:44pm up 6:53, 2.6.16.13-4-default GNU/Linux Let's use OpenOffice. http://www.openoffice.org

4 4

RE: [CentOS] wireless question
by Mark Schoonover 23 Jan '07

23 Jan '07

Brent wrote: > TO get this router to work you going to need to flash a new firmware > on it. Most routers do not support a bridge mode. Check DD-WRT to see > if you have a compatible router you can flash DD-WRT too. > > http://www.dd-wrt.com/dd-wrtv2/index.php I use dd-wrt on the Buffalo WAP, and it's very nice. I replaced my Linksys with the Buffalo only because the Buffalo was cheaper, around $55. Dd-wrt is pretty easy to figure out. HTH Mark

1 0

Thunderbird package chrome icon
by Paul Kopacz 23 Jan '07

23 Jan '07

Hello, Since starting to use the Thunderbird package provided through the CentOS yum repos (currently using thunderbird-1.5.0.9-0.1.el4.centos4), my co-worker and I have noticed that we no longer have a Thunderbird icon in the title bar of any of the Thunderbird application windows. I was able to fix this by creating the directory /usr/lib/thunderbird-1.5.0.9/chrome/icons/default/ and copying into it the (attached) file default.xpm. The binary download bundle from the mozilla.org site includes that file (and several others under the chrome/icons directory) while the package from the CentOS repos does not. Is there something that I'm missing? Please note that I am not talking about the desktop integration (i.e. the thunderbird.desktop file and the thunderbird.png file in the /usr/share/pixmaps directory). That part works fine. Thanks very much, Paul Kopacz

2 4

mark and route traffic in a bridge
by Roberto Pereyra 23 Jan '07

23 Jan '07

Hi all !! I would to like to mark and route some kind of traffic (ie: outbound www, now by simplicity) ---inet1--------eth0------------| | | linux | --eth1------- clientes ---inet2(90.0.0.1)--------eth2-| | I have eth0 and eth1 bridged (eth2 is not bridged). I would to route www outbound clients traffic through eth2. This scheme works ? I wrote this scripts: a) add this line to /etc/iproute2/rt_tables 200 web b) I assign ip to eth2: /sbin/ifconfig eth2 90.0.0.2 c) Mark outbound www packets from clients: /usr/local/sbin/iptables -A PREROUTING -t mangle -m physdev --physdev-in eth1 -p tcp --dport 80 -j MARK --set-mark 2 d) I routing this marked packets /sbin/ip rule add fwmark 2 table web /sbin/ip route add default via 90.0.0.1 dev eth2 table web e) Now I run iptraf listen eth2 but through eth2 is nothing of traffic. What's a doing wrong ? How I can do it with a bridge ? Thanks in advance for any hint and excuse my english. roberto -- Ing. Roberto Pereyra ContenidosOnline Looking for Linux Virtual Private Servers ? Click here: http://www.spry.com/hosting-affiliate/scripts/t.php?a_aid=426&a_bid=56

1 0

How long it takes to determine the Domainname
by Daniel Rindt 23 Jan '07

23 Jan '07

Hello, i try to install via a kickstart file. But the install process is stalled, please see the attached File. I wait more than 5 Minutes... Thanks in Advance. Daniel

3 4

libMrm.so.3
by Dirk Roessler 23 Jan '07

23 Jan '07

I need to install libMrm.so.3 on my computer that has Centos4.3. However, I am not experienced with Centos4.3 so far. I do not know where to find this library for Centos4.3 and how to install it. Is there something like apt? Using system-config-packages I cannot find any intelligent way to search for programs and package. Dirk

2 1

mark and route traffic in a bridge
by Roberto Pereyra 23 Jan '07

23 Jan '07

Hi all !! I would to like to mark and route some kind of traffic (ie: outbound www, now by simplicity) ---inet1--------eth0------------| | | linux |--eth1------- clientes ---inet2(90.0.0.1)--------eth2-| | I have eth0 and eth1 bridged (eth2 is not bridged). I would to route www outbound clients traffic through eth2. This scheme works ? I wrote this scripts: a) add this line to /etc/iproute2/rt_tables 200 web b) I assign ip to eth2: /sbin/ifconfig eth2 90.0.0.2 c) Mark outbound www packets from clients: /usr/local/sbin/iptables -A PREROUTING -t mangle -m physdev --physdev-in eth1 -p tcp --dport 80 -j MARK --set-mark 2 d) I routing this marked packets /sbin/ip rule add fwmark 2 table web /sbin/ip route add default via 90.0.0.1 dev eth2 table web e) Now I run iptraf listen eth2 but through eth2 is nothing of traffic. What's a doing wrong ? How I can do it with a bridge ? Thanks in advance for any hint and excuse my english. roberto -- Ing. Roberto Pereyra ContenidosOnline Looking for Linux Virtual Private Servers ? Click here: http://www.spry.com/hosting-affiliate/scripts/t.php?a_aid=426&a_bid=56

1 0

VDQ Grub
by Beartooth 22 Jan '07

22 Jan '07

Very Dumb Question : I have tried about four times now, using an old pentium2 with two hard drives (20 GB and 30 GB) to install both CentOS 4.4 and Fedora Core 6 in such a way as to enable dual-boot between them. I've tried it by installing 4.4 first, and then FC6. I've tried it by installing FC6 first, and then 4.4. I've tried it with and without giving the installer permission to use both drives. I always end up with ability to boot only to one OS, usually the one installed last. Between tries I wipe both drives with DBAN. Surely there must be something I'm doing wrong, obvious to many but not to me. Clue, please? -- Beartooth Staffwright, PhD, Neo-Redneck Linux Convert Fedora Core 6; CXO 5.0.1; Pine 4.64, Pan 0.119; Privoxy 3.0.3; Dillo 0.8.6, Galeon 2.0.3, Epiphany 2.16, Opera 9.10, Firefox 1.5 Remember I know precious little of what I am talking about.

5 4

error message RFE
by Ted Miller 22 Jan '07

22 Jan '07

I would like to file a bug report for the error message: kernel: floppy0: data CRC error: track 77, head 1, sector 3, size 2 The error is real, it is the message that is in error. Where do I file this? Ted Miller Indiana, USA

6 7

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss