Discuss

discuss@lists.centos.org

5 participants
34752 discussions

Start a nNew thread

LogIPTABLES
by Adriano Frare 03 Mar '06

03 Mar '06

Dear Friends, How I redirect messages of screen to file on IPTABLES ? Thanks Adriano

3 2

Re: [CentOS] 3ware 9550 series
by David Thompson 03 Mar '06

03 Mar '06

Will Dinkel wrote: > >I'll second that. We've been using the 9550sx 4/8/12 port cards in a >good number machines with positive results. If using RAID5 you need to >be picky about what SATA drives you use. WD desktop drives are known to >cause timeouts. Use the RAID edition drives instead. Most definitely. We have the 'YR' version drives for our eval. Dave

1 0

CentOS-announce Digest, Vol 13, Issue 2
by centos-announce-request＠centos.org 03 Mar '06

03 Mar '06

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEEA:2006:0303-001 CentOS 4 i386 yumex Enhancement - update (extras only) (Johnny Hughes) 2. CEEA:2006:0303-001 CentOS 4 x86_64 yumex Enhancement - update (extras only) (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Fri, 03 Mar 2006 04:35:25 -0600 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEEA:2006:0303-001 CentOS 4 i386 yumex Enhancement - update (extras only) To: CentOS-Announce <centos-announce(a)centos.org> Message-ID: <1141382125.3823.39.camel(a)myth.home.local> Content-Type: text/plain; charset="us-ascii" CEEA:2006:0303-001 CentOS 4 i386 yumex Enhancement - update (extras only) Yum Extender (yumex) has been added to CentOS-4 i386 extras. Yum is the official (and preferred) CentOS installation and update tool. yumex is a Graphical User Interface for the yum. Special thanks to the yumex maintainer Tim Lauridsen for working with the CentOS team to roll in several of our suggested changes into this version of yumex. Tim also backported all the code he has done for yum-2.5.x so we can use it with the 2.4.x series of yum that is included in CentOS-4 ... and Tim has graciously accepted our request to maintain yumex for CentOS. You can install yumex with the command (if you have the extras repo enabled): yum install yumex The following files are uploaded and syncing to the mirrors: i386: yumex-0.99.11-1.0.c4.noarch.rpm src: yumex-0.99.11-1.0.c4.src.rpm

1 0

RE: [CentOS] Advice on setting up Raid and LVM
by Bowie Bailey 03 Mar '06

03 Mar '06

Matt Hyclak wrote: > On Thu, Mar 02, 2006, Fajar Priyanto enlightened us: > > I'm setting up Centos4.2 on 2x80GB SATA drives. > > > > The partition scheme is like this: > > /boot = 300MB > > / = 9.2GB > > /home = 70GB > > swap = 500MB > > > > > > The RAID is RAID 1. > > md0 = 300MB = /boot > > md1 = 9.2GB = LVM > > md2 = 70GB = LVM > > md3 = 500MB = LVM > > > > Now, the confusing part is: > > 1. When creating VolGroup00, should I include all PV (md1, md2, > > md3)? Then create the LV. > > 2. When setting up RAID 1, should I make those separated partitions > > for /, /home, and swap? Or, should I just make one big RAID device? > > > > The future purpose of using LVM is I want to be able to expand any > > partitions that would run out of space into a new disk. > > Personally, I would do: > > md0 = 300MB (/boot) > md1 = 500MB (swap) > md2 = remainder (pv.00) > > I would then create a single volume group on md2, create / and home, > but I would leave 20-30% of the VG empty so you can expand later. > That would work out to like 10GB /, and 50GB /home, and leave you 15 > or so GB for expansion. Or you could do this: RAID 1 partition: md0 = 80GB (or whatever the useable total is) Then include md0 in VolGroup00 and create your logical volumes. LV0 = 300MB (/boot) LV1 = 500MB (swap) LV2 = 9.2GB (/) LV3 = 70GB (/home) This way everything is mirrored and everything is in one VG. If you need more space, add another pair of mirrored drives and add the new mirrored device into VolGroup00. Then you can use the space to expand whichever filesystem needs it. I would also advise following the previous poster's advice and leaving a few GB unused so that you aren't forced to add more drives immediately when LV2 fills up faster than you expected. -- Bowie

4 3

SeLinux Question
by Chris Weisiger 03 Mar '06

03 Mar '06

I do not have this directory: /etc/selinux/targeted/src/policy/domains/misc/local.te i dont have the directory src through misc in my /etc/selinux directory. How do i get these directories. Is there a rpm package i need to install? or are those just directories i make my self?

2 1

How to create user with period (.)
by spart cus 03 Mar '06

03 Mar '06

hi guys, how can i create a username with period ? Like for example username: linux.spartacus tia --------------------------------- Relax. Yahoo! Mail virus scanning helps detect nasty viruses!

6 6

pmacct
by Peter Kitchener 03 Mar '06

03 Mar '06

Does any know how to use pmacct. I would like to use something like this to measure network traffic on some of our hosts. I can download the package fine however i cannot find any documentation on this software anywhere. Regards, Peter K

1 0

per port ip routing -- possible?
by Jack Bailey 02 Mar '06

02 Mar '06

Hello, I have a customer who has two Internet connections, cable and DSL, where the cable is much faster than the DSL connection. Is it possible in CentOS 4.2 to use the "ip route" command to direct certain outbound traffic over the faster connection, say http(s) requests? Web searches turn up solutions where NAT is involved, but this guy isn't using NAT. Example configs that show how to load balance multiple connections and ensure symmetric routing all work great, but I don't an example of per-port routing. Any pointers or example commands would be greatly appreciated. Jack

2 1

Raid 1 problems
by Mace Eliason 02 Mar '06

02 Mar '06

Hi, I have setup raid on a new server and have found that if I remove one drive it will boot but if I remove the other it says missing OS. I am using two 18.2Gig SCSI drives, using software raid 1. I have it setup with the following drives in this order. /boot swap / all are mirrored between the two drives. I remember a while back that their was a problem with grub would that be the problem here? Why does it work on one drive and not the other? Thanks Mace

2 3

Re: [CentOS] Scalix install on CentOS
by Robert Moskowitz 02 Mar '06

02 Mar '06

At 03:51 PM 3/2/2006, James Gagnon wrote: >Content-class: urn:content-classes:message >Content-Type: multipart/alternative; > boundary="----_=_NextPart_001_01C63E3B.0C80B069" > >Hey All, >I read on the list here not to long ago a work >around for the following error on CentOS for installing the scalix mail server > >Error: unsupported OS release: CentOS release 4.2 (Final) on x86_64 > >Someone posted a fix where you could edit a file >changing the name of the OS or something to fix >this. Anyone remember which file it was I could >edit and what I needed to edit it too in order to make this install work? And I should point out that the new v 10 is practically a slam dunk. There was only one dependency I missed in the Centos install and the Scalix installer took care of it.

2 2

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss