Discuss

discuss@lists.centos.org

5 participants
34752 discussions

Strange soundcard problem w/4.2
by Chris Mauritz 23 Oct '05

23 Oct '05

Hi there, I'm trying to repurpose an unused machine (athlon XP 3000+) for my young daughter to use. It's on a motherboard with a VIA KT880 chipset and VIA integrated soundcard (VIA 8237). The card seems to be detected during boot time and shows up in the system log, but when I try to actually use the sound card within Gnome, there's no sound. The device is detected, but there's no sound. So I figured this may be an "oddball" chipset, so I disabled the onboard sound device and installed a vanilla Soundblaster Live! card. Again, the card seems to be detected by the kernel at boot time, but there's no sound and the soundcard detection utility reports "no sound card detected." Any suggestions would be greatly appreciated since my daughter is now camped at my expensive laptop so she can play tux racer (a great game for kids, BTW). :-) Cheers,

3 4

Exim on all interfaces
by Morten 22 Oct '05

22 Oct '05

Hi. I have a default installation of Exim with only a few changed settings. It appears to only bind to the loopback interface. I have not set any local_interfaces values, as the default behaviour is to bind on all interfaces. But alas, exim does not respond on its IP address: [root@obiwan ~]# /etc/init.d/exim restart Shutting down exim: [ OK ] Starting exim: [ OK ] [root@obiwan ~]# ifconfig eth0 eth0 Link encap:Ethernet HWaddr 00:07:E9:26:FD:29 inet addr:192.168.0.101 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::207:e9ff:fe26:fd29/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:49916 errors:0 dropped:0 overruns:0 frame:0 TX packets:27221 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7366849 (7.0 MiB) TX bytes:3741826 (3.5 MiB) Base address:0xddc0 Memory:fe9e0000-fea00000 [root@obiwan ~]# telnet 192.168.0.101 25 Trying 192.168.0.101... telnet: connect to address 192.168.0.101: Connection refused telnet: Unable to connect to remote host: Connection refused [root@obiwan ~]# telnet 127.0.0.1 25 Trying 127.0.0.1... Connected to obiwan (127.0.0.1). Escape character is '^]'. 220 obiwan ESMTP Sendmail 8.13.1/8.13.1; Fri, 21 Oct 2005 19:08:25 +0200 I've tried to explicitly set local_interfaces to 127.0.0.1 : 192.168.0.101 but no such luck. Any clues? Thanks. Morten

3 3

CentOS 4.2 and VMWare
by Derek Lee-Wo 22 Oct '05

22 Oct '05

Has anyone successfully installed CentOS 4.2 within VMWare 5 and have it run successfully. I tried doing this last night, but after the install, it cannot boot. It hangs at the GRUB message. I have used CentOS 4.1 many times within VMWare without problems. I did a search and found some where people have had this problem, but not within VMWare. The problems seem to have been related to SCSI devices. I know VMWare allows you to choose between two types of SCSI interfaces, but I chose the default presented (for RedHat Enterprise 4). Maybe I need to use a different VM configuration? Derek

4 5

apt repository
by Mark Quitoriano 22 Oct '05

22 Oct '05

Is there a problem with apt-get repo? i get 404 not found when i try to update the repositories? im using rpm http://mirror.centos.org for my repositories and here's the error of apt. Ign http://mirror.centos.org centos/4.1/apt/i386 release Err http://mirror.centos.org centos/4.1/apt/i386/os pkglist 404 Not Found [IP: 64.92.174.74 <http://64.92.174.74> 80] Ign http://mirror.centos.org centos/4.1/apt/i386/os release Err http://mirror.centos.org centos/4.1/apt/i386/addons pkglist 404 Not Found [IP: 64.92.174.74 <http://64.92.174.74> 80] Ign http://mirror.centos.org centos/4.1/apt/i386/addons release Err http://mirror.centos.org centos/4.1/apt/i386/updates pkglist 404 Not Found [IP: 64.92.174.74 <http://64.92.174.74> 80] Ign http://mirror.centos.org centos/4.1/apt/i386/updates release Err http://mirror.centos.org centos/4.1/apt/i386/extras pkglist 404 Not Found [IP: 64.92.174.74 <http://64.92.174.74> 80] Ign http://mirror.centos.org centos/4.1/apt/i386/extras release Err http://mirror.centos.org centos/4.1/apt/i386/contrib pkglist 404 Not Found [IP: 64.92.174.74 <http://64.92.174.74> 80] Ign http://mirror.centos.org centos/4.1/apt/i386/contrib release Err http://mirror.centos.org centos/4.1/apt/i386/centosplus pkglist 404 Not Found [IP: 64.92.174.74 <http://64.92.174.74> 80] Ign http://mirror.centos.org centos/4.1/apt/i386/centosplus release Failed to fetch http://mirror.centos.org/centos/4.1/apt/i386/base/pkglist.os404 Not Found [IP: 64.92.174.74 <http://64.92.174.74> 80] Failed to fetch http://mirror.centos.org/centos/4.1/apt/i386/base/pkglist.addons 404 Not Found [IP: 64.92.174.74 <http://64.92.174.74> 80] Failed to fetch http://mirror.centos.org/centos/4.1/apt/i386/base/pkglist.updates 404 Not Found [IP: 64.92.174.74 <http://64.92.174.74> 80] Failed to fetch http://mirror.centos.org/centos/4.1/apt/i386/base/pkglist.extras 404 Not Found [IP: 64.92.174.74 <http://64.92.174.74> 80] Failed to fetch http://mirror.centos.org/centos/4.1/apt/i386/base/pkglist.contrib 404 Not Found [IP: 64.92.174.74 <http://64.92.174.74> 80] Failed to fetch http://mirror.centos.org/centos/4.1/apt/i386/base/pkglist.centosplus 404 Not Found [IP: 64.92.174.74 <http://64.92.174.74> 80] what other repo can i use? -- Regards, Mark Quitoriano, CCNA http://www.atamanetworks.com Fan the flame... http://www.spreadfirefox.com/?q=user/register&r=19441

3 3

Newest CentOS sponsor
by Johnny Hughes 22 Oct '05

22 Oct '05

All, I would like to take the time to announce our newest CentOS dedicated server donor, ServerBeach. So far, the ServerBeach network has been extremely fast and I especially like their RapidRescue and RapidReboot services. If you are in the market for a dedicated server, I have no problem recommending ServerBeach. http://www.serverbeach.com Thanks for supporting CentOS :) Johnny Hughes

1 0

a gotcha with cron and 4.2
by Joe Pruett 21 Oct '05

21 Oct '05

the new cron in 4.2 activates the pam access module. if you have been using that to control ssh access or other things, now suddently cron is going to use it as well. this only seems to affect user crontabs and crontabs in /etc/cron.d. from some digging around i was able to determine that cron sets the tty to 'cron', so you can just add a line like: +:ALL:cron to /etc/security/access.conf and it will enable those cron jobs again. NOTE: this is only if you already have modified access.conf. if you haven't touched it, then you don't need to do anything. i just happened to notice: Oct 21 11:15:02 charon pam_access[27438]: access denied for user `root' from `cron' Oct 21 11:15:02 charon pam_access[27439]: access denied for user `cacti' from `cron' Oct 21 11:15:02 charon crond[27438]: Permission denied Oct 21 11:15:02 charon crond(pam_unix)[27438]: session closed for user root Oct 21 11:15:02 charon crond[27439]: Permission denied Oct 21 11:15:02 charon crond(pam_unix)[27439]: session closed for user cacti in some logs while i was looking for other things...

1 0

Apache won't start, semaphores exhausted
by Fong Vang 21 Oct '05

21 Oct '05

One of our systems run Apache 2.0.52 (httpd-2.0.52-12.2.ent.centos4 rpm). The kernel we're running is 2.6.9-11.ELsmp. After a few weeks of uptime, Apache refuses to start with the following error in error.log: [crit] (28)No space left on device: mod_jk: could not create jk_log_lock With Apache not running, there're a lot of semaphores left behind by Apache, e.g.: ------ Semaphore Arrays -------- key semid owner perms nsems 0x00000000 98304 root 600 1 0x00000000 131073 apache 600 1 0x00000000 163842 apache 600 1 0x00000000 196611 apache 600 1 0x00000000 229380 apache 600 1 0x00000000 786437 root 600 1 ... ... ... /proc/sys/kernel/sem has the following settings: 250 32000 32 128 Is this an Apache issue or is this a kernel issue? Why is Apache not releasing the semaphores? Thanks for any help.

5 8

SCSI schizophrenia
by Craig White 21 Oct '05

21 Oct '05

OK - I only have one tape drive but a real problem these days backing up. I ***may*** have connected the SCSI connector to the 'other' external connector when shifting stuff around in the rack. # cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: MegaRAID Model: LD 0 RAID5 69G Rev: 4.10 Type: Direct-Access ANSI SCSI revision: 02 Host: scsi0 Channel: 04 Id: 06 Lun: 00 Vendor: PE/PV Model: 1x3 SCSI BP Rev: 1.1 Type: Processor ANSI SCSI revision: 02 Host: scsi0 Channel: 05 Id: 06 Lun: 00 Vendor: SEAGATE Model: ULTRIUM06242-XXX Rev: 1514 Type: Sequential-Access ANSI SCSI revision: 03 Host: scsi0 Channel: 05 Id: 06 Lun: 01 Vendor: SEAGATE Model: ULTRIUM06242-XXX Rev: 1514 Type: Sequential-Access ANSI SCSI revision: 03 How do I get it 're-parse' the scsi system so it only indicates one ULTRIUM tape drive? Me suspects this is why I am having backup issues. Craig -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

4 4

Creating a USB Flash Installation Drive
by nethub＠gmail.com 21 Oct '05

21 Oct '05

With the decreasing price of USB Flash Memory Drives, I was wondering how I would go about creating a USB Flash Drive that could be used the same as CD 1 to install CentOS on my servers. Has anyone done this, and if so, can you tell me the procedure to make this work? Thanks!

4 3

Re: [CentOS] corrupt rpm problem
by Peter Farrow 21 Oct '05

21 Oct '05

This is where I am now (see attached) P.

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss