Discuss

discuss@lists.centos.org

1 participants
34753 discussions

Mail server problem on CentOS 4.1
by Dominik Składanowski 13 Aug '05

13 Aug '05

Hello list. I'm configuring mail server on CentOS 4.1 (migration from SuSE). Configuration of postfix with sasl is OK - server receive and sent mails using TLS and SASL authentication. Problems: 1. When mail arrives to server it don't go to Amavis-new (from Dag repo). I added lines to master.cf as described here: http://www.ijs.si/software/amavisd/README.postfix.txt and Amavis and postfix daemons starts fine. Mails just go to mailboxes bypassing Amavis-new. 2. When I try to receive mail from server through pop3 (110 tcp) or pop3s (995 tcp) (cyrus-imapd), I get an alert message: *Sending of password did not succeed. Mail server mail.domain.com responded: Unable to locate maildrop: Mailbox does not exist* 3. How to setup: when sending mails from server console (pine or mutt) have to use sasl authentication? 4. Where are cert files used by cyrus-imapd to secure pop3s connection. I need to use my own certs. 5. After login to squirrelmail I get this http://www.ch.pw.edu.pl/~dominik/squirrelmail.png screen Regards -- ____________________________________________________________________ D o m i n i k S k ł a d a n o w s k i

1 0

Remote archiving with tar over ssh
by James B. Byrne 12 Aug '05

12 Aug '05

Ok. I discovered how to make exclusions work via find: find / $ -name "*.conf" -a -not -name "ld.so.conf" $ -type f - print That should also fix any problems with directories ending in .conf. -- *** e-mail is NOT a secure channel *** James B. Byrne mailto:ByrneJB.<token>@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3CE delivery <token> = hal

1 0

CentOS] Remote archiving with tar over ssh
by James B. Byrne 12 Aug '05

12 Aug '05

> On Fri Aug 12 17:14:00 UTC 2005 Paul Heinlein heinlein at madboa.com wrote: > > How about > > tar c $(find / -name \*.conf) | ssh host.com "gzip -c > file.tar.gz" Thank you very much, this worked. I have two supplementary questions. First, what is the significance of the $() construct in bash and how does it interact with tar? Does it take the place of standard input based on its position in the utility call? Second, is there a way to exclude certain file names from matching that otherwise do? I have tried: $(find / -name /*.conf && !*.so.conf) and several variants without any success. I am not using rsync, yet, due to lack of familiarity with it and a pressing need to get something working now. Once the essentials are in place then I will look at alternatives. Regards, Jim -- *** e-mail is NOT a secure channel *** James B. Byrne mailto:ByrneJB.<token>@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3CE delivery <token> = hal

2 1

RE: [CentOS] CentOS] Remote archiving with tar over ssh
by Joshua Hirsh 12 Aug '05

12 Aug '05

Hi James, > > tar c $(find / -name \*.conf) | ssh host.com "gzip -c > file.tar.gz" > > Thank you very much, this worked. I have two supplementary > questions. First, what is the significance of the $() construct in > bash and how does it interact with tar? Does it take the place of > standard input based on its position in the utility call? In this command, the $() construct is used to return files via find to the command line for tar. It's most often used to assign variables with the value of returned commands. ie FOO=$(netstat), where by $FOO is now assigned the output of netstat. Since this is a remote command, it's neccessary to do it this way. If you were running this locally only, these two commands would be identical: tar -cvf foobar.tar `find / -name \*.conf` tar -cvf foobar.tar $(find / -name \*.conf) > Second, is there a way to exclude certain file names from matching > that otherwise do? I have tried: > > $(find / -name /*.conf && !*.so.conf) There sure is, but try something like this instead: tar c $(find / -name \*.conf -not -name \*.so.conf) | ssh host.com "gzip -c > file.tar.gz" Cheers, -Joshua

1 0

RE: [CentOS] Need a CONFIRMED working hardware sata raid10 card
by Drew Weaver 12 Aug '05

12 Aug '05

Just need to make sure I can plug it in and go.. -Drew -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Will McDonald Sent: Friday, August 12, 2005 11:27 AM To: CentOS mailing list Subject: Re: [CentOS] Need a CONFIRMED working hardware sata raid10 card On 12/08/05, Drew Weaver <drew.weaver(a)thenap.com> wrote: > > > Does anyone know of a card that actually works with CentOS 4 > that supports Raid10? I don't think CentOS support software raid 10 from the > installer. We've got a 3ware 8006-2LP [1] running under WBEL so the rest of that family should be fine under CentOS too. Took a little bit of pissing about under FC1 to get it working properly but then we just tar-ed everything off the internal disks onto SATA disks while we rebuilt the box. We just wanted it for JBOD which is why we plumped for the lower port capacity card but one of the cards with a higher port count should serve you well. The CLI's great (though readline support would be nice ;)). Does exactly what you'd want it to, you can rescan the bus, add and remove disks on-the-fly if they're in appropriate hot-swap bays (with one or 2 provisos for non-JBOD). Docs for the CLI's features for the 7/8000 series (9000 series uses different software) are here... http://www.3ware.com/support/UserDocs/CLI_UG.pdf 3ware also have a 4 disk drive, 3 5.25" drive bay drive cage [2] available, though we used 2 Vantec EZ-Swap SATA bays. The Vantec bays are a *little* flimsy but do the job well enough. Will. [1] http://www.3ware.com/products/serial_ata8000.asp [2] http://www.3ware.com/products/ata.asp [3] http://www.vantecusa.com/product-storage.html (MRK-200ST-BK) _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

2 1

FreeNX
by Dominik Składanowski 12 Aug '05

12 Aug '05

Hello list. Does anybody use FreeNX on CentOS? Is there any rpm form CentOS 4.1? Regards -- ____________________________________________________________________ D o m i n i k S k ł a d a n o w s k i

5 19

Problem connecting a USB modem.
by Fernando Lança 12 Aug '05

12 Aug '05

Hi I'm trying to connect a USB CDMA modem (z010) to a CentOS 4.1 (kernel 2.6.9-11.EL) and I can't talk to the modem. I tried the same modem under Fedora Core 1 (2.4.22-1.2199.nptl) and it works like a charm. The only difference is /dev/ttyACM0 for CentOS and /dev/input/ttyACM0 for the Fedora. Any help would be appreciated. Tank's. Fernando Lança Some debug info: CentOS: /var/log/messages --> Aug 11 17:47:34 c4 kernel: usb 3-3: new full speed USB device using address 4 Aug 11 17:47:35 c4 kernel: drivers/usb/class/cdc-acm.c: Ignoring extra header Aug 11 17:47:35 c4 kernel: cdc_acm 3-3:1.0: ttyACM0: USB ACM device Aug 11 17:47:35 c4 kernel: usbcore: registered new driver cdc_acm Aug 11 17:47:35 c4 kernel: drivers/usb/class/cdc-acm.c: v0.23:USB Abstract Control Model driver for USB modems and ISDN adapters ............. Aug 11 17:50:04 c4 ifup-ppp: pppd started for mymodem on /dev/ttyACM0 at 57600 Aug 11 17:50:04 c4 pppd[3019]: pppd 2.4.2 started by root, uid 0 Aug 11 17:50:05 c4 wvdial[3034]: WvDial: Internet dialer version 1.54.0 Aug 11 17:50:05 c4 wvdial[3034]: Initializing modem. Aug 11 17:50:05 c4 wvdial[3034]: Sending: ATZ Aug 11 17:50:10 c4 wvdial[3034]: Sending: ATQ0 Aug 11 17:50:11 c4 wvdial[3034]: Re-Sending: ATZ Aug 11 17:50:16 c4 wvdial[3034]: Modem not responding. Aug 11 17:50:16 c4 pppd[3019]: Connect script failed Aug 11 17:50:17 c4 pppd[3019]: Exit. /etc/wvdial.conf [Modem0] Modem = /dev/ttyACM0 Baud = 57600 SetVolume = 0 Dial Command = ATDT Init1 = ATZ Init3 = ATM0 FlowControl = Hardware (CRTSCTS) [Dialer mymodem] Username = XXXXXXXXX Password = xxxx Phone = XXXXX Stupid Mode = 1 Inherits = Modem0 ----------------------------------------- Fedora Core 1: /var/log/messages --> Aug 11 09:54:58 c1 kernel: usb.c: USB device not accepting new address=9 (error=-110) Aug 11 09:54:59 c1 kernel: hub.c: new USB device 00:1d.0-1, assigned address 10 Aug 11 09:54:59 c1 kernel: ttyACM0: USB ACM device Aug 11 09:55:03 c1 kernel: usb-uhci.c: ENXIO 80000a80, flags 0, urb eaa4fa00, burb eaa4f480 Aug 11 09:55:03 c1 usb.agent[11124]: missing kernel or user mode driver acm Aug 11 09:55:03 c1 usb.agent[11125]: missing kernel or user mode driver acm .......... Aug 11 09:55:51 c1 ifup-ppp: pppd started for mymodem on /dev/input/ttyACM0 at 57600 Aug 11 09:55:52 c1 pppd[12546]: pppd 2.4.1 started by root, uid 0 Aug 11 09:55:53 c1 wvdial[12567]: WvDial: Internet dialer version 1.53 Aug 11 09:55:53 c1 wvdial[12567]: Initializing modem. Aug 11 09:55:53 c1 wvdial[12567]: Sending: ATZ Aug 11 09:55:53 c1 wvdial[12567]: ATZ Aug 11 09:55:53 c1 wvdial[12567]: OK Aug 11 09:55:53 c1 wvdial[12567]: Sending: ATM0 Aug 11 09:55:53 c1 wvdial[12567]: ATM0 Aug 11 09:55:53 c1 wvdial[12567]: OK Aug 11 09:55:53 c1 wvdial[12567]: Modem initialized. /etc/wvdial.conf [Modem0] Modem = /dev/input/ttyACM0 Baud = 57600 SetVolume = 0 Dial Command = ATDT Init1 = ATZ Init3 = ATM0 FlowControl = Hardware (CRTSCTS) [Dialer mymodem] Username = XXXXXXXX Password = xxxxx Phone = xxxx Stupid Mode = 1 Inherits = Modem0

2 4

Need a CONFIRMED working hardware sata raid10 card
by Drew Weaver 12 Aug '05

12 Aug '05

Does anyone know of a card that actually works with CentOS 4 that supports Raid10? I don't think CentOS support software raid 10 from the installer. Thanks, -Drew

2 2

OpenLDAP - building from src rpm fails (internal compiler error)
by Sean Staats 12 Aug '05

12 Aug '05

I'm trying to enable ACI in openldap by: 1) Install the source rpm (rpm -ivh http://mirrors.kernel.org/centos/4/os/SRPMS/openldap-2.2.13-2.src.rpm) 2) Modify the spec file to include '--enable-aci' in the appropriate locations. I have even tried with the original (no aci) spec file. 3) Running 'rpmbuild -bb openldap.spec, which fails with the following output: <snip> /bin/sh ./libtool --mode=compile cc -c -I. -I./../include -I./../include_auto -D_GNU_SOURCE -D_REENTRANT -O2 -g -pipe -m32 -march=i386 -mtune=pentium4 -D_REENTRANT -fPIC ../db/db_auto.c ../db/db.c: In function `__db_master_update': ../db/db.c:661: internal compiler error: Segmentation fault Please submit a full bug report, with preprocessed source if appropriate. See <URL:http://bugzilla.redhat.com/bugzilla> for instructions. cc -c -I. -I./../include -I./../include_auto -D_GNU_SOURCE -D_REENTRANT -O2 -g -pipe -m32 -march=i386 -mtune=pentium4 -D_REENTRANT -fPIC ../db/db_auto.c -fPIC -DPIC -o db_auto.o echo timestamp > btree_auto.lo /bin/sh ./libtool --mode=compile cc -c -I. -I./../include -I./../include_auto -D_GNU_SOURCE -D_REENTRANT -O2 -g -pipe -m32 -march=i386 -mtune=pentium4 -D_REENTRANT -fPIC ../common/db_byteorder.c cc -c -I. -I./../include -I./../include_auto -D_GNU_SOURCE -D_REENTRANT -O2 -g -pipe -m32 -march=i386 -mtune=pentium4 -D_REENTRANT -fPIC ../common/db_byteorder.c -fPIC -DPIC -o db_byteorder.o echo timestamp > db_byteorder.lo /bin/sh ./libtool --mode=compile cc -c -I. -I./../include -I./../include_auto -D_GNU_SOURCE -D_REENTRANT -O2 -g -pipe -m32 -march=i386 -mtune=pentium4 -D_REENTRANT -fPIC ../db/db_cam.c echo timestamp > db_am.lo /bin/sh ./libtool --mode=compile cc -c -I. -I./../include -I./../include_auto -D_GNU_SOURCE -D_REENTRANT -O2 -g -pipe -m32 -march=i386 -mtune=pentium4 -D_REENTRANT -fPIC ../db/db_conv.c cc -c -I. -I./../include -I./../include_auto -D_GNU_SOURCE -D_REENTRANT -O2 -g -pipe -m32 -march=i386 -mtune=pentium4 -D_REENTRANT -fPIC ../db/db_cam.c -fPIC -DPIC -o db_cam.o cc -c -I. -I./../include -I./../include_auto -D_GNU_SOURCE -D_REENTRANT -O2 -g -pipe -m32 -march=i386 -mtune=pentium4 -D_REENTRANT -fPIC ../db/db_conv.c -fPIC -DPIC -o db_conv.o The bug is not reproducible, so it is likely a hardware or OS problem. make: *** [db.o] Error 1 make: *** Waiting for unfinished jobs.... echo timestamp > db_auto.lo echo timestamp > db_conv.lo echo timestamp > db_cam.lo error: Bad exit status from /var/tmp/rpm-tmp.90507 (%build) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.90507 (%build) Could somebody point me in the right direction on how to fix or get around this problem? Many thanks! -SS

1 0

Compiling lirc on centos 4.1 - SOVLED
by Jerry Geis 12 Aug '05

12 Aug '05

I used the following command to solvee the missing kernel problem. ./configure --with-port=0x3f8 --with-irq=4 --with-transmitter --enable-sandboxed --with-driver=serial --with-kerneldir=/lib/modules/2.6.9-11.EL/build Things are going much better now.. Jerry ---------- Karanbir, I am still having problems. I grabbed the rpm and installed it. I could not get a /dev/lircd device. I put the lirc.rules in /etc/udev/... even rebooted and still not there. I then grabbed the src rpm, went through the normal stuff and tried to run ./configure and it tells me I need the kernel source installed. I have the kernel source installed. I am just selecting the default of serial when I run ./configure. I would like to do this from the source package - but the kernel source keeps stopping that... Any further ideas? Jerry Jerry Geis wrote: >// I am trying to compile lirc.0.7.1 from www.lirc.org and it is indiacting //>/ that />/ kernel source is not installed. />/ />/ I then installed kernel source and ran the ./configure again. Same message />/ about kernel not being installed. />/ />/ ANyone compiled lirc.0.7.1 on centos 4.1? / You can get a pre-built lirc-0.7.1 for i386 at : http://centos.karan.org/el4/extras/stable/i386/RPMS/repodata/repoview/L.gro… the source for it is http://centos.karan.org/el4/extras/stable/i386/SRPMS/lirc-0.7.1-1.src.rpm You might want to take a look at how its packaged, make changes etc in the .spec and rebuild for your own needs.

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss