Discuss

discuss@lists.centos.org

1 participants
34730 discussions

Start a nNew thread

CentOS 4 and PCMCIA Cards
by Joe Harb 27 Apr '05

27 Apr '05

Has anyone been successful with PCMCIA cards being seen by CentOS4?

3 4

gnome themes
by Ryan 27 Apr '05

27 Apr '05

I'm looking for any easy way to make gnome a little more like KDE so my KDE apps look nice under gnome. I also want some extra gnome themes. Does anyone have any links on how-tos, or any ideas on where to start?

2 2

apt repo's for centos
by Lee Parmeter 27 Apr '05

27 Apr '05

I downloaded and installed apt and synaptic using yum ok, but are there corresponding apt repo's for the yum ones? If so, what are they? -- Lee Parmeter Emperor, linXos - The Flying Penguin http://www.linXos.com Linux Registered User #337161 'It's free. It works. Duh.'" - Eric Harrison The United States is NOT a democracy, it was founded as a Republic! God is not a republican or a democrat nor is His government a democracy! - Lee Parmeter __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

4 6

Centos 3.4 3ware 9500S Floppy Boot Disk
by Seth Bardash 27 Apr '05

27 Apr '05

We have created a Centos 9500S Floppy Boot Disk for installing Centos on a 3ware 9500S series controller that will allow installing and booting directly from this controller. This boot disk supports only AMD XP, MP and Opterons in 32 bit mode Centos 3.4 for the up and smp versions. We can also do a x86_64 version if required. Any interest???? If so we will post it to our web site. Thanks Seth Bardash Integrated Solutions and Systems 1510 North Gate Road Colorado Springs, CO 80921 719-495-5866 719-495-5870 Fax 719-337-4779 Cell http://www.integratedsolutions.org Failure can not cope with perseverance! -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.10.3 - Release Date: 4/25/2005

3 3

Re: [CentOS] using vino on centos 4
by Lee Parmeter 26 Apr '05

26 Apr '05

--- Joe Pruett <joey(a)clean.q7.com> wrote: > sorry i figured this out after deleting the other parts > of the thread. > > just run vino-preferences as the user who runs the main x > display. it > will have various options to enable and as soon as you do > that you can get > to hostname:0 via vnc. works quite well. I tried that but it did not work, even running vncviewer on the server itself. So, I decided to use the native X display support of realvnc using vnc.so. This solution gave me what I was after. I can connect now to the server via vncviewer server:0 and have root password access to my normal desktop in gnome. http://www.realvnc.com/products/free/4.1/x0.html > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos > -- Lee Parmeter Emperor, linXos - The Flying Penguin http://www.linXos.com Linux Registered User #337161 'It's free. It works. Duh.'" - Eric Harrison The United States is NOT a democracy, it was founded as a Republic! God is not a republican or a democrat nor is His government a democracy! - Lee Parmeter __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

2 1

Re: [CentOS] IBM BladeCenter HS20 blades
by John Burk 26 Apr '05

26 Apr '05

This problem also exhibits in RHEL3-U4, so CentOS 3.4 inherited it. CentOS 3.4 is treated as rhas3 by xcat. The first time you run 'nodeset <host> install' for a particular OS, the /tftpboot/xcat/rhas3/<arch> tree gets populated with files, including install.gz, which is a compressed disk image which in turn contains all the kernel modules, including tg3. 1.) First thing you need to do is delete (or rename) the /tftpboot/xcat/rhas3/<arch>/ directory. 2.) Next is to fix a minor bug in xcat's 'mkinstall' located in $XCATROOT/install/rhas3/ARCH/bin/. I posted the fix to the xcat user's list, and have included the hacked mkinstall as an attachment. Please note that this mkinstall is for 'x86', but it should be pretty straightforward to see how to make the change for x86_64 if that's your arch. << cut&paste'd from my post in the xcat user's list >> I went the second route and dug around inside $XCATROOT/install/rhas3/ARCH/bin/mkinstall. Turns out that there is a fix already inside this script and a module already built, but that it only will be applied to RHEL3-U4 and not CentOS 3.4 It's because of the file test at line 375 of mkinstall: the version string in the kernel rpm that ships on the RHEL3-U4 cd's is 2.4.21-27, but the CentOS-3.4 kernel version string is 2.4.21-27.0.1. This version mismatch is echo'd at lines 383 and 386 also. << eo snip >> 3.) 'cd' to the $XCATROOT/install/rhas3/ARCH/ directory. The fix only gets applied if you're in this directory, as the path the to bcm5700.o is relative - Egan Ford probably knows why he did it this way, I'm just hacking on his script and wanted to muck with it as little as possible. 4.) run 'nodeset <some_CentOS3.4_host> install'. Because there is not an install.gz in the /tftpboot/xcat/rhas3/<arch> directory, it will be built, and because you're in the $XCATROOT/install/rhas3/ARCH/ directory, the pre-built bcm5700.o module which lives in $XCATROOT/install/rhas3/ARCH/data/27.EL will get put into the install.gz as tg3.o. 5.) 'rreset' your blades and watch them properly install CentOS 3.4 via nfs... John Burk Sr. Technical Director Mainframe Entertainment 604.628.1019 Niswonger Charles M Contr AFRL/MNGG wrote: > John, > > I'm running 14 older HS20's right now and have 14 of the new > 8843 3.6 GHz EM64T blades coming in. Right now we're running SuSE 9.2 > and xcat, but we've seen the same tg3 bug that you mentioned. I'm > curious as to the workaround that you used for CentOS. With the > multi-level load needed to install the bootable image onto the blade > we still don't have a satisfactory workaround... > > Mike Niswonger, Systems Engineer > charles.niswonger(a)eglin.af.mil > Air Force Research Lab / MNGG (KHILS), > SYColeman Corp. > 101 W Eglin Blvd, Bldg. 13, Rm. 115 > Eglin AFB, FL 32542-5427 > (850)882-4446, x1217 > (850)882-4451, fax > > -----Original Message----- > From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On > Behalf Of John Burk > Sent: Friday, April 15, 2005 1:42 PM > To: CentOS mailing list > Subject: Re: [CentOS] IBM BladeCenter HS20 blades > > I have 60 HS20's running CentOS 3.4, but I do the install via the xcat > toolset over nfs. > > Have you looked at xcat yet to manage the os on your blades? Well > worth the time to setup, written primarily by IBM, and free. > > http://www.xcat.org/ > > BTW, what processors are in your blades? I'm running the 3.2GHz > Nocona's, if your are similar you'll probably need to use these kernel > parameters in your grub.conf: > > acpi=noirq noexec=off noapic > > And if you do go with nfs installs via xcat, the tg3 driver in 3.4 is > broken. E-mail me and I'll send you the work-around. It's already in > xcat but it takes a bit of finesse to apply the fix. > > John Burk > > Sr. Technical Director > Mainframe Entertainment > > 604.628.1019 > > > > > Brendon Colby wrote: > > > Greetings, > > > > We have purchased an IBM BladeCenter and I am in the process of > > testing Linux installation on these things (boot off SAN i.e. qla2300 > > driver, not using internal drives). My distro of choice is Debian, > > however, since I'm really not interested in trying to hand compile all > > the drivers, I decided to try CentOS (which I'm so far very impressed > > with). > > > > On boot, as with the Debian Sarge disk, the CDROM disappears. The > > installation media complains that it cannot find the CD. I'm testing > > using the DVD ISO of CentOS 4. Has anyone been successful in getting > > CentOS 3/4 installed on a BladeCenter server? I noticed back in 11/04 > > there were a few posts on it. > > > > Thanks. > > > > Brendon Colby > > _______________________________________________ > > CentOS mailing list > > CentOS(a)centos.org > > http://lists.centos.org/mailman/listinfo/centos > > > > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos > #!/bin/ksh #egan(a)us.ibm.com #See $XCATROOT/README for license. # if [ -z "$XCATROOT" ] then if [ -r /etc/sysconfig/xcat ] then . /etc/sysconfig/xcat else if [ -r /etc/rc.config ] then . /etc/rc.config fi fi fi if [ -z "$XCATROOT" ] then if [ -r "$(dirname $0)/../lib/xcatroot" ] then . $(dirname $0)/../lib/xcatroot fi fi if [ -z "$XCATROOT" ] then echo "$(basename $0): env XCATROOT not defined!" >&2 exit 1 fi if [ ! -d "$XCATROOT" ] then echo "$(basename $0): XCATROOT $XCATROOT does not exist!" >&2 exit 1 fi . $XCATROOT/lib/functions function usage { echo "\nUsage: ${MYNAME} [singlenode]\n" } needhelp $* && usage >&2 && exit 0 if [ "$#" != "1" ] then usage >&2 exit 1 fi NODE=$1 NODENAME=$1 if ! isanode $1 2>/dev/null then echo "${MYNAME}: $1 is not a node" >&2 exit 1 fi if NODETYPE=$(tabdb $NODETYPETAB $NODE 3) then : else echo "${MYNAME}: $NODE nodetype image not defined in $NODETYPETAB" >&2 exit 1 fi if OSVER=$(tabdb $NODETYPETAB $NODE 1) then : else echo "${MYNAME}: $NODE nodetype osver not defined in $NODETYPETAB" >&2 exit 1 fi if ARCH=$(tabdb $NODETYPETAB $NODE 2) then : else echo "${MYNAME}: $NODE nodetype arch not defined in $NODETYPETAB" >&2 exit 1 fi if NODERES=$(whatismyres2 $NODE) then RESNAME=$NODERES else echo "${MYNAME}: $NODE noderes not defined in $NODERESTAB" >&2 exit 1 fi MYOSVER=rhas3 MYARCH=x86 if [ "$OSVER" != "$MYOSVER" -o "$ARCH" != "$MYARCH" ] then echo "${MYNAME}: Install directory does not match $NODE in $NODETYPETAB" exit 1 fi if INSTALLDIR=$(tabdb $SITETAB installdir 1) then : else echo "$MYNAME: installdir not defined in $SITETAB" exit 1 fi DISTDIR=$OSVER/$ARCH CFDIR=scripts/$OSVER/$ARCH PXET=install.pxe GRUBT=install.grub ELILOT=elilo.conf KERNEL=installz INITRD=install.gz FILES="$INSTALLDIR/$DISTDIR/images/pxeboot/initrd.img $INSTALLDIR/$DISTDIR/images/pxeboot/vmlinuz /usr/share/terminfo/x/xterm $TFTPDIR/$TFTPXCATROOT $TFTPDIR" if [ -r $TFTPDIR/$TFTPXCATROOT/$OSVER/$ARCH/$KERNEL -a -r $TFTPDIR/$TFTPXCATROOT/$OSVER/$ARCH/$INITRD ] then DOIMAGE=0 else DOIMAGE=1 fi EXIT=0 for i in $FILES do if [ ! -r $i ] then echo "${MYNAME}: $i missing" EXIT=1 fi if [ "$EXIT" = "1" ] then exit 1 fi done if [ -r $XCATPREFIX/tftp/pxelinux.0 ] then mkdir $TFTPDIR >/dev/null 2>&1 cp -f $XCATPREFIX/tftp/pxelinux.0 $TFTPDIR else echo "$MYNAME: $XCATPREFIX/tftp/pxelinux.0 missing" exit 1 fi if [ -r $XCATPREFIX/tftp/default ] then mkdir $TFTPDIR/pxelinux.cfg >/dev/null 2>&1 cp -f $XCATPREFIX/tftp/default $TFTPDIR/pxelinux.cfg/default else echo "$MYNAME: $XCATPREFIX/tftp/default missing" exit 1 fi MASTER=$(tabdb $SITETAB master 1) \ || echo "${MYNAME}: master not defined in $SITETAB" MASTER_IP=$(nametoip $MASTER) #MASTER_IPS=$( # IPS="" # for i in $(dnsnr "@$MASTER(-eth[0-9])?") # do # if IP=$(nametoip $i) # then # IPS="$IPS $IP" # fi # done # print $IPS #) MASTER_IPS=$( IPS="" for i in $(ifconfig | egrep '^eth[0-9]' | awk '{print $1}') do IP=$(ifconfig $i | perl -pi -e 's/ +/:/g' | grep inet:addr: | awk -F: '{print $4}') IPS="$IPS $IP" done print $IPS ) if CONFIG_SERVER=$(tabdb $NODERESTAB $RESNAME $noderes_config_server) then CONFIG_IP=$(nametoip $CONFIG_SERVER) else CONFIG_IP=$MASTER_IP CONFIG_SERVER=$MASTER fi RSHC=$(tabdb $SITETAB rsh 1) \ || echo "${MYNAME}: rsh not defined in $SITETAB" if [ "$(basename $RSHC)" = "rsh" ] then RSH="Y" else RSH="N" fi SERIAL=$(tabdb $NODERESTAB $RESNAME $noderes_serial) \ || echo "${MYNAME}: serial defined in $NODERESTAB" INSTALL_NFS=$(tabdb $NODERESTAB $RESNAME $noderes_nfs_install) \ || echo "${MYNAME}: nfs not defined in $NODERESTAB" INSTALL_NFS_IP=$(nametoip $INSTALL_NFS) if [ "$INSTALL_NFS_IP" = "noip" ] then echo "Invalid Install NFS for $NODENAME" fi INSTALL_NIC=$(tabdb $NODERESTAB $RESNAME $noderes_netdevice) \ || echo "${MYNAME}: install_nic not defined in $NODERESTAB" INSTALL_DIR=$(tabdb $NODERESTAB $RESNAME $noderes_install_dir) \ || echo "${MYNAME}: nfs dir not defined in $NODERESTAB" INSTALL_SRC_DIR=$INSTALL_DIR/$DISTDIR INSTALL_CF_DIR=$INSTALL_DIR/$CFDIR mkdir -p $INSTALL_CF_DIR FILE=$INSTALLDIR/$CFDIR/$NODETYPE-$NODERES INSTALL_CF_FILE=$NODETYPE-$NODERES if [ ! -r $NODETYPE.tmpl ] then if [ ! -r base/$NODETYPE.tmpl ] then echo "${MYNAME}: cannot read template $NODETYPE.tmpl" exit 1 else TMPLDIR="base" fi else TMPLDIR="." fi export MASTER export MASTER_IP export MASTER_IPS export CONFIG_IP CONFIG_SERVER export RSH export OSVER export ARCH export NODE export NODERES export NODENAME export NODETYPE export INSTALL_NFS export INSTALL_NFS_IP export INSTALL_SRC_DIR export INSTALL_CF_DIR export INSTALL_CF_FILE export KERNEL export INITRD perl -pi -e 's/\\\n$//' <$TMPLDIR/$NODETYPE.tmpl | LANG=C subvars.pl >$FILE mkdir -p $TFTPDIR/$TFTPXCATROOT/$OSVER/$ARCH if [ -r "$PXET" ] then PXEF=$TFTPDIR/$TFTPXCATROOT/$OSVER/$ARCH/$NODETYPE-$NODERES.pxe perl -pi -e 's/\\\n$//' <$PXET | LANG=C subvars.pl >$PXEF if [ "$SERIAL" = "0" -o "$SERIAL" = "1" ] then : else perl -pi -e "s/^SERIAL/#SERIAL/g" $PXEF # perl -pi -e "s/(console[^ ]* )//" $PXEF perl -pi -e "s/(console[^ ]* ){2}//" $PXEF fi fi if [ -r "$GRUBT" ] then GRUBF=$TFTPDIR/$TFTPXCATROOT/$OSVER/$ARCH/$NODETYPE-$NODERES.grub perl -pi -e 's/\\\n$//' <$GRUBT | LANG=C subvars.pl >$GRUBF if [ "$SERIAL" = "0" -o "$SERIAL" = "1" ] then : else perl -pi -e "s/^serial/#serial/g" $GRUBF perl -pi -e "s/^terminal/#terminal/g" $GRUBF # perl -pi -e "s/(console[^ ]* )//" $GRUBF perl -pi -e "s/(console[^ ]* ){2}//" $GRUBF fi fi if [ -r "$ELILOT" ] then ELILOC=$TFTPDIR/$TFTPXCATROOT/$OSVER/$ARCH/$NODETYPE-$NODERES.elilo perl -pi -e 's/\\\n$//' <$ELILOT | LANG=C subvars.pl >$ELILOC if [ "$SERIAL" = "0" -o "$SERIAL" = "1" ] then : else perl -pi -e "s/^SERIAL/#SERIAL/g" $ELILOC # perl -pi -e "s/console[^ ]* //" $ELILOC perl -pi -e "s/(console[^ ]* ){2}//" $ELILOC fi fi if [ "$DOIMAGE" = "0" ] then exit 0 fi cp -f $INSTALLDIR/$DISTDIR/images/pxeboot/vmlinuz $TFTPDIR/$TFTPXCATROOT/$OSVER/$ARCH/$KERNEL cp -f $INSTALLDIR/$DISTDIR/images/pxeboot/initrd.img $TFTPDIR/$TFTPXCATROOT/$OSVER/$ARCH/$INITRD TMPDIR=/tmp/.mkinstall-$OSVER-$ARCH if getlock mkinstall-$OSVER-$ARCH 60 then : else echo "${MYNAME} Failed to get $TMPDIR lock" exit 1 fi rm -rf $TMPDIR mkdir -p $TMPDIR gunzip -c $TFTPDIR/$TFTPXCATROOT/$OSVER/$ARCH/$INITRD >$TMPDIR/initrd 2>/dev/null mkdir -p $TMPDIR/root mount -o loop $TMPDIR/initrd $TMPDIR/root #mkdir -p $TMPDIR/root/etc/terminfo/x #mkdir -p $TMPDIR/root/etc/terminfo/v #mkdir -p $TMPDIR/root/etc/terminfo/b #cp -f /usr/share/terminfo/x/xterm $TMPDIR/root/etc/terminfo/v/vt100 #cp -f /usr/share/terminfo/x/xterm $TMPDIR/root/etc/terminfo/b/bterm #cp -f /usr/share/terminfo/x/xterm $TMPDIR/root/etc/terminfo/x/xterm ### #rm -f $TMPDIR/root/etc/terminfo/v/vt100-nav perl -pi -e 's/^.*qla2.00.*\n$//' $TMPDIR/root/modules/pcitable #MYDIR=$(pwd) #cd $TMPDIR #gunzip -c root/modules/modules.cgz | cpio -id 2>/dev/null #if [ -r $MYDIR/data/e100.o ] #then # rm -f 2.4.21-3.ELBOOT/eepro100.o # cp -f $MYDIR/data/e100.o 2.4.21-3.ELBOOT/eepro100.o # cat $MYDIR/data/e100.pcitable >> root/modules/pcitable #fi #if [ -r $MYDIR/data/bcm5700.o ] #then # cp -f $MYDIR/data/bcm5700.o 2.4.21-3.ELBOOT/bcm5700.o # cat $MYDIR/data/bcm5700.pcitable >> root/modules/pcitable # cat $MYDIR/data/bcm5700.module-info >> root/modules/module-info #fi #if [ -r $MYDIR/data/e1000.o ] #then # cp -f $MYDIR/data/e1000.o 2.4.21-3.ELBOOT/e1000.o # cat $MYDIR/data/e1000.pcitable >> root/modules/pcitable # cat $MYDIR/data/e1000.module-info >> root/modules/module-info #fi #find 2.4.21-3.ELBOOT -type f -print | cpio -o -H crc 2>/dev/null | gzip -c -9 >root/modules/modules.cgz #cd $MYDIR # default kernel version that ships with RHEL3-U4 KERNELVER=2.4.21-27 # # try and detect if we're actually installing CentOS instead of RHEL # ( tests cut&paste'd from XCATROOT/sbin/copycds ) # if [ -f $INSTALLDIR/$DISTDIR/.discinfo ] then if egrep "1104951135.38" $INSTALLDIR/$DISTDIR/.discinfo >/dev/null 2>&1 then if grep "i386" $INSTALLDIR/$DISTDIR/.discinfo >/dev/null 2>&1 then # kernel version in the CentOS-3.4 distro KERNELVER=2.4.21-27.0.1 fi fi fi # # fix the broken tg3 driver in RHEL3-U4/CentOS-3.4 # if [ -f $INSTALLDIR/$DISTDIR/RedHat/RPMS/kernel-${KERNELVER}.EL.i686.rpm ] then MYDIR=$(pwd) cd $TMPDIR gunzip -c root/modules/modules.cgz | cpio -id 2>/dev/null if [ -r $MYDIR/data/27.EL/bcm5700.o ] then cp -f $MYDIR/data/27.EL/bcm5700.o ${KERNELVER}.ELBOOT/i386/tg3.o fi find ${KERNELVER}.ELBOOT -type f -print | cpio -o -H crc 2>/dev/null | gzip -c -9 >root/modules/modules.cgz cd $MYDIR fi umount $TMPDIR/root gzip -9 -f $TMPDIR/initrd cp -f $TMPDIR/initrd.gz $TFTPDIR/$TFTPXCATROOT/$OSVER/$ARCH/$INITRD rm -rf $TMPDIR freelock mkinstall-$OSVER-$ARCH 0 cd $TFTPDIR/$TFTPXCATROOT/$OSVER/$ARCH chown -f root.root *.gz *.pxe *.nbi *.eb chmod -f 444 *.gz *.pxe *.nbi *.eb exit 0

2 1

Jabberd and Centos 3.4
by Aaron Havens 26 Apr '05

26 Apr '05

I am trying to setup a local Jabberd server for our members of our IT department to use. I downloaded the source for 2.0s8 from the jabbered site. When i run ./configure I receive the following error: "configure: error: Libidn >= 0.3.0 not found" I went out to dag and downloaded and installed the libidn-0.4.6-1.1.el3.dag rpm. When i ran ./configure again it failed again. After a little searching on Google I found the following article: http://mail.jabber.org/pipermail/jadmin/2004-June/016435.html Following its advice I rand ./configure --with-extra-library-path=/usr/lib/libidn.so.11. However it still fails. Anyone have any ideas? I don't know anything about libidn, is 0.4.6 incompatible with versions needing 0.3.0? Thanks, -- Aaron Havens Network Technician Computing and Telecommunications Northeastern State University 610 N. Grand Suite 318 Tahlequah, OK 74464 http://netnotes.nsuok.edu/~havensa/ 918-456-5511 Ext. 5813

3 4

Problem with VSFTPD on I/F aliased IP
by James B. Byrne 26 Apr '05

26 Apr '05

I am trying to get VSFTPD to listen on a particular IP. The ifconfig output for the host is: eth0 Link encap:Ethernet HWaddr XX:XX:XX:XX:XX:XX inet addr:aaa.bbb.ccc.26 Bcast:aaa.bbb.ccc.255 Mask:255.255.255.0 inet6 addr: xxxx::xxx:xxx:xxxx:xxxx/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:223374 errors:0 dropped:0 overruns:0 frame:0 TX packets:136053 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:22056304 (21.0 MiB) TX bytes:20211609 (19.2 MiB) eth0:180 Link encap:Ethernet HWaddr XX:XX:XX:XX:XX:XX inet addr:aaa.bbb.ccc.180 Bcast:aaa.bbb.ccc.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) eth0:184 Link encap:Ethernet HWaddr XX:XX:XX:XX:XX:XX inet addr:aaa.bbb.ccc.184 Bcast:aaa.bbb.ccc.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:674 errors:0 dropped:0 overruns:0 frame:0 TX packets:674 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:506130 (494.2 KiB) TX bytes:506130 (494.2 KiB) I can start vsftpd with the default vsftpd.conf. However, if I add just one line: listen_address=aaa.bbb.ccc.184 Then I get this behaviour. /var/log/messages: Apr 26 09:18:19 inet06 vsftpd: vsftpd vsftpd succeeded but # service vsftpd status vsftpd dead but subsys locked There are no further log messages and I cannot see where else to look for clues as to what is going on. Can anyone help. I get the digest version of this list so replies to both the list and directly to myself are greatly appreciated. Regards, Jim -- *** e-mail is not a secure channel *** mailto:byrnejb.<token>@harte-lyne.ca James B. Byrne Harte & Lyne Limited vox: +1 905 561 1241 9 Brockley Drive fax: +1 905 561 0757 Hamilton, Ontario <token> = hal Canada L8E 3C3

1 0

RE: [CentOS] losing NFS connection
by Marc Powell 26 Apr '05

26 Apr '05

> -----Original Message----- > From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On > Behalf Of Angelo Machils > Sent: Monday, April 25, 2005 2:43 PM > To: centos(a)centos.org > Subject: RE: [CentOS] losing NFS connection > >> [snip] > > > >Just a thought but have you hard-coded speed and duplex all the way > >through? Don't trust auto-negotiation. > > I have opened the firewall on the server all the way for the client (and > also the other way around) but it makes no difference. After a while I > see these messages again in the /var/log/messages on the client: > Apr 25 21:38:02 solaris kernel: RPC: garbage, exit EIO > Apr 25 21:38:33 solaris last message repeated 70 times > Apr 25 21:39:34 solaris last message repeated 122 times > Apr 25 21:40:01 solaris last message repeated 55 times > Apr 25 21:40:01 solaris crond(pam_unix)[4701]: session opened for user > root by (uid=0) > Apr 25 21:40:01 solaris crond(pam_unix)[4701]: session closed for user > root > Apr 25 21:40:02 solaris kernel: RPC: garbage, exit EIO > And this keeps repeating...... No entries on the server though..... > > Which file do I have to edit in order to set the NIC into fixed state. I > know that I can use mii-tool to check and set, but is this permanent, > even after a reboot? It varies but mii-tool changes will be lost on reboot. There are several ways of getting around that from simplest to hardest -- - Add '/sbin/mii-tool -F 100baseTx-FD' to /etc/rc.local - Add '/sbin/mii-tool -F 100baseTx-FD ${DEVICE}' to /etc/sysconfig/network-scripts/ifup-post - research your card driver and add the appropriate arguments in /etc/modules.conf. I almost always opt for the first option. As has been previously noted, you must make sure that the switch, hub or router that you are connected to is also forced to the same speed and duplex. -- Marc

2 1

RE: [CentOS] Centos-4 Kernel pannic
by Bob Pierce 26 Apr '05

26 Apr '05

Just an update to this... I upgraded the firmware on the SCSI RAID controller to version 413O-A09 as found at this link: http://support.dell.com/support/downloads/format.aspx?c=us&cs=04&l=en&s= bsd&SystemID=PWE_PNT_XEO_1750&os=LE30&osl=en&deviceid=2608&devlib=35&cat egory=35&releaseid=R85295 Since upgrading the firmware we have had no more kernel panic problems. Thanks to everyone for your help, and thanks to Johnny Hughes for providing the easy links to the firmware. Bob.

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss